[Setting]

FontName=Tahoma
FontSize=8
[Strings]
{Lite Fire Laser}=Lite Fire Laser
{Print Picture}=Print Picture
{NC Sender}=NC Sender
{Quick Tagging}=Quick Tagging
{Grbl Settings}=Grbl Settings
{Mini Laser}=Mini Laser
{Event}=Event
{Label_Status}=Label_Status
{Download Installer}=Download Installer
{Update Now}=Update Now
{Language}=Language
{Auto}=Auto
{English(US)}=English(US)
{-}=-
{About ...}=About ...
{Downloading new version}=Downloading new version
{Checking update...}=Checking update...
{Update success!}=Update success!
{can not connect to update host!}=can not connect to update host!
{This is the last version.}=This is the last version.
{Notice}=Notice
{Language setting is saved, restart software to take effect.}=Language setting is
saved, restart software to take effect.
{Downloading Installer}=Downloading Installer
{Download success!}=Download success!
{by diy8000.taobao.com}=by diy8000.taobao.com
{Form_Work}=Form_Work
{Port Name}=Port Name
{Pixel Size}=Pixel Size
{Burning Time}=Burning Time
{0:00}=0:00
{(mm)}=(mm)
{Work Area}=Work Area
{X}=X
{Y}=Y
{Baud Rate}=Baud Rate
{Open Larser Device}=Open Larser Device
{Y+}=Y+
{X+}=X+
{X-}=X-
{Y-}=Y-
{Load Picture}=Load Picture
{Laser On (Strong)}=Laser On (Strong)
{Start}=Start
{Pause}=Pause
{Stop}=Stop
{<<}=<<
{>>}=>>
{Gray Style}=Gray Style
{Paste Picture}=Paste Picture
{Font}=Font
{Invert}=Invert
{Flip}=Flip
{Laser On (Week)}=Laser On (Week)
{Close}=Close
{Can not open port!}=Can not open port!
{Can not check grbl version! Is port right?}=Can not check grbl version! Is port
right?
{Opening %s ...}=Opening %s ...
{Select a picture file}=Select a picture file
{All Pictures}=All Pictures
{Continue}=Continue
{Form_NCSender}=Form_NCSender
{�����}=�����
{Speed}=Speed
{Label_Speed}=Label_Speed
{Label2}=Label2
{Load NC File}=Load NC File
{Create image NC file}=Create image NC file
{New Size }=New Size
{Full Mode}=Full Mode
{Cutting Mode}=Cutting Mode
{Save}=Save
{OK}=OK
{Reset}=Reset
{Create text NC file}=Create text NC file
{Font Name}=Font Name
{Char Height}=Char Height
{Line Height}=Line Height
{Create}=Create
{Outline }=Outline
{My NC Files}=My NC Files
{Export NC File}=Export NC File
{Rename}=Rename
{Delete}=Delete
{Required working area is too big!}=Required working area is too big!
{This file is empty!}=This file is empty!
{GCode File / NC File}=GCode File / NC File
{Select Font ...}=Select Font ...
{Chose Gray}=Chose Gray
{Chose the style you liked}=Chose the style you liked
{Value}=Value
{Item}=Item
{Apply}=Apply
{Default Setting}=Default Setting
{More efficiency setting}=More efficiency setting
{Factory Reset}=Factory Reset
{Reverse X axis }=Reverse X axis
{Reverse Y axis }=Reverse Y axis
{PWM Laser Power Cotrol (If possible)}=PWM Laser Power Cotrol (If possible)
{Laser power}=Laser power
{My Laser Type}=My Laser Type
{Form_Tag}=Form_Tag
{Text:}=Text:
{Font Height:}=Font Height:
{Final text is}=Final text is
{Speed:}=Speed:
{Burn Now}=Burn Now
{Special characters}=Special characters
{$y Year of current time}=$y Year of current time
{$m Month}=$m Month
{$d Day}=$d Day
{$H Hour}=$H Hour
{$M Minute}=$M Minute
{$S Second}=$S Second
{About}=About
{Email:}=Email:
{Power By:}=Power By:
{Form_Machine}=Form_Machine
{Which machine do you have?}=Which machine do you have?
{Detail >>}=Detail >>
{Cancel}=Cancel
{Device Settings}=Device Settings
{Engraver Master}=Engraver Master
{Update Board Firmware}=Update Board Firmware
{Save As ...}=Save As ...
{Copy URL to clipboard}=Copy URL to clipboard
{Detail}=Detail
{Laser On (Weak)}=Laser On (Weak)
{Clear Pixle}=Clear Pixle
{Test Size}=Test Size
{Z+}=Z+
{Z -}=Z -
{Get HELP}=Get HELP
{Repeats}=Repeats
{Load CAD DXF File}=Load CAD DXF File
{GCode File (*.nc;*.cnc;*.ngc;*.ncc;*.tap)}=GCode File
(*.nc;*.cnc;*.ngc;*.ncc;*.tap)
{AutoCAD DXF (*.dxf), CorelDraw DXF (*.dxf)}=AutoCAD DXF (*.dxf), CorelDraw DXF
(*.dxf)
{All files (*.*)}=All files (*.*)
{Please save this file as a DXF (*.dxf) file first.}=Please save this file as a DXF
(*.dxf) file first.
{i }=i
{Back <<<}=Back <<<
{Form_Device}=Form_Device
{Y STEPS}=Y STEPS
{Moving speed (mm/min)}=Moving speed (mm/min)
{Acceleration, mm/sec^2}=Acceleration, mm/sec^2
{My Machine}=My Machine
{Friendly Machine List}=Friendly Machine List
{X STEPS}=X STEPS
{Default Acceleration:Unknow}=Default Acceleration:Unknow
{Default Moving Speed:Unknow}=Default Moving Speed:Unknow
{XY Steps:Unknow}=XY Steps:Unknow
{Unknow Machine}=Unknow Machine
{Push pen down (mm)}=Push pen down (mm)
{Z STEPS}=Z STEPS
{Weak Light Adjust}=Weak Light Adjust
{Grbl Settings >>>}=Grbl Settings >>>
{Appliy machine default settings}=Appliy machine default settings
{Save Settings}=Save Settings
{Use as a Pen Drawing Machine}=Use as a Pen Drawing Machine
{Reverse Z axis }=Reverse Z axis
{Default Acceleration: }=Default Acceleration:
{Default Moving Speed: }=Default Moving Speed:
{XY Steps: }=XY Steps:
{Form_IE}=Form_IE
{Share something}=Share something
{Shared Photos}=Shared Photos
{Shared Pictures}=Shared Pictures
{Go back}=Go back
{Next Page}=Next Page
{Form_LoadPicture}=Form_LoadPicture
{Picture Width}=Picture Width
{Picture Height}=Picture Height
{Pixels}=Pixels
{Next}=Next
{Form_LoadPictureII}=Form_LoadPictureII
{Form_Upload}=Form_Upload
{The source picture you want to sahre (optional)}=The source picture you want to
sahre (optional)
{The photo of picture printed you want to show (optional)}=The photo of picture
printed you want to show (optional)
{Example}=Example
{Upload Now}=Upload Now
{Upload success, thank you!}=Upload success, thank you!
{Upload fail!}=Upload fail!
{Update firmware}=Update firmware
{Main Control Clip}=Main Control Clip
{Other .Hex firmware}=Other .Hex firmware
{Update firmware now!}=Update firmware now!
{Update firmware success!}=Update firmware success!
{Update firmware fail!}=Update firmware fail!
{Share and Idea}=Share and Idea
{????}=????