B.TECH/EE/3RD SEM/ELEC 2102 (BACKLOG)/2019 B.

TECH/EE/3RD SEM/ELEC 2102 (BACKLOG)/2019

Group – D B.TECH/EE/3RD SEM/ELEC 2102(BACKLOG)/2019

6. (a) State the properties of Complete Incidence matrix. CIRCUIT THEORY

(ELEC 2102)
(b) The incidence matrix of a network is given below. Draw the
directed graph of the network and identify any one tree of the Time Allotted : 3 hrs Full Marks : 70
graph. Hence, compute its tie-set matrix.
 1 0 0 0 1 0 0 1 Figures out of the right margin indicate full marks.
 0 1 0 0 1 1 0 0
=   Candidates are required to answer Group A and
 0 0 1 0 0 1 1 1 any 5 (five) from Group B to E, taking at least one from each group.
 
 0 0 0 1 0 0 1 0  Candidates are required to give answer in their own words as far as
3 + (5 + 1 + 3) = 12 practicable.

7. (a) Define Z parameters. Group – A

(Multiple Choice Type Questions)
(b) In a two port network, Z11 = 2 Ω, Z12 = Z21 = 5 Ω and Z22 = 1 Ω.
Find (i) Y-parameters (ii) h-parameters and (iii) ABCD 1. Choose the correct alternative for the following: 10 × 1 = 10
parameters.
3 + (3 + 3 + 3) = 12 (i) The coefficient of coupling for two coils having L1 = 2 H, L2 = 8
H, M = 3 H is
Group – E (a ) 0.18 (b) 0.75 (c) 1.33 (d) 5.33.
(ii) The initial value of f(t) with Laplace transform ( )=
8. (a) Draw and explain the gain vs. frequency characteristics of band ( )
pass and band reject filters. ( )(
is
)
(a) 3 (b) ∞ (c) 0 (d) 1.
(b) Design a 2nd order Butterworth low pass filter of cut off
frequency 2 kHz. Sketch its frequency response. (iii) An RL series circuit has R = 2 Ω and L = 4 H. Time constant of
4 + (6 + 2) = 12 the circuit is
(a) 0.5s (b) 1s (c) 2s (d) 4s.
9. (a) Explain ‘.TRAN’ and ‘.TF’ statements in SPICE with examples.
(iv) The amplitude of Gate signal is
(b) A series LC circuit with L = 1 H and C = 1 F is excited with a 10 (a) 1 (b) ∞ (c) 0 (d) not a fixed value.
V, DC source. Write a SPICE program to plot the voltage across
inductor (VL) and voltage across capacitor (Vc). (v) The Laplace transform of u(t-1) is
(2 + 2) + 8 = 12 (a) ( )
(b) ( )
(c) (d) .

(vi) If a graph has n number of nodes and b number of branches

then the number of tie-sets of the graph is equal to
(a) b - n (b) b + n + 1 (c) b - n + 1 (d) b - n - 1.
ELEC 2102 4 ELEC 2102 1
B.TECH/EE/3RD SEM/ELEC 2102 (BACKLOG)/2019 B.TECH/EE/3RD SEM/ELEC 2102 (BACKLOG)/2019
(vii) The cut-set matrix gives the relation between 3. (a) Two inductors having self inductances of L1 and L2 and mutual
(a) branch voltages and branch currents Inductance of M between them are connected in parallel
(b) branch voltages and twig branch voltages aiding. Show that equivalent inductance is = .
(c) branch voltages and link currents
(d) link voltages and link currents. (b) What will be the value of ZL for the circuit shown in Fig.3 to
(viii) The condition of reciprocity for h-parameters is have maximum power transfer from source to load?
(a) h11 = h22 (b) h12 = -h21
(c) h12 h21 = h11 h22 (d) h12 = h21.
(ix) The dc gain of a system having transfer function ( )=
( )( )
is
Fig.3
(a) 12 (b) 6 (c) 3 (d) 2. 6 + 6 = 12
(x) ‘. AC’ statement in SPICE is use to analyze the network in
(a) frequency domain (b) time domain Group – C
(c) both frequency and time domain (d) none of these. 4. (a) Define Unit Step function and find its Laplace transform.
Group – B (b) Find Laplace transform of the waveform shown in Fig.4.
2. (a) Use mesh analysis to find the voltage drop across capacitor for
the circuit shown in Fig.1.

Fig.4
(2 + 2) + 8 = 12

Fig.1 5. (a) Find f(t) where f(t) is the Laplace inverse of ( ) = .

(b) Find the Norton’s Equivalent circuit across the terminal AB for (b) Find ( ) and ( ) in the circuit shown in Fig.5, assume the
the circuit shown in Fig.2. network is initially relaxed.

Fig.2 Fig.5
6 + 6 = 12 3 + 9 = 12
ELEC 2102 2 ELEC 2102 3