Fastcam Sa6 Updated PDF
Fastcam Sa6 Updated PDF
The FASTCAM SA6 has been developed to permit high definition recording Benefits
and detailed high speed analysis of large spatial areas in applications such
as automotive safety testing, fluid dynamics and solid mechanics. The Performance examples:
system provides 1920x1440 pixel image resolution at all frame rates up to • 1,125 fps at 1920x1440 pixel resolution
1,125fps, 1920x1080 full HD resolution at frame rates up to 1,500fps and • 1,500 fps at 1920x1080 pixel resolution
recording rates up to 75,000fps at reduced resolution. • 2,000 fps at 1280x1024 pixel resolution
• 3,000 fps at 1024x768 pixel resolution
The system utilizes a high performance CMOS image sensor to provide • 5,000 fps at 768x512 pixel resolution
excellent light sensitivity allowing high speed recordings to be made with
the minimum of additional lighting. The utilization of 12bit dynamic range Low noise, high quality imaging and superior color fidelity
output yields exceptional image quality and superior color fidelity.
Photron’s experience in the field of high quality broadcast imaging provides Composite and HD SDI video output for real time monitoring
during set-up, recording and playback
a stable camera operation and superior imaging performance.
Options to enhance system operation include remote keypad with
The camera may be controlled via the optional remote local keypad or over integrated viewfinder, integrated calibration shutter and
a Gigabit Ethernet network, and is fully compatible with the Photron J-BOX automated lens control options and Nikon G type lenses
for multiple camera installations. Integrated capping shutter to facilitate
automated calibration and automated lens control options further extend the GigaBit Ethernet interface and compatibility with Photron J-BOX
ease of system operation. The system is supplied with intuitive Photron for multiple camera installations
FASTCAM Viewer (PFV) software and Photron Device Control SDK (software
development kit) allowing integration with user specific software.
w w w. p h o t r o n .c o m
FAS TCAM S A 6
HIGH-DEFINIFION HIGH-SPEED CAMERA SYSTEM
Sensor 10 m pixels, temperature stabilized, 12-bit ADC (Bayer system Phase Lock Enable cameras to synchronized precisely together to a
color, single sensor ) with micro lenses master camera or external source
Shutter Global electronic shutter from 16.7ms to 2.76 s independent Event Markers Ten user entered event markers mark specific events within
of frame rate the image sequence in real time. Immediately accessible
Lens Mount Interchangeable F-mount, C-mount using supplied adapters, through software
Nikon G lens mount (optional), PL lens mount (optional), B4 Dual Speed Enables the recording speed to be changed up or down by a
lens mount (optional) Recording factor of 2, 4 or 8 during a recording
Extended Dynamic Selectable in twenty steps (0 to 95% in 5% increments) to
Trigger Modes Start, End, Center, Manual, Random, Random Reset, Random
Range prevent pixel over-exposure
Center, Random Manual and Dual Speed Recording
Memory 8GB (standard: 1,936 frames @ maximum resolution ) Saved Image JPEG, AVI, TIFF, BMP, RAW, PNG, MOV and FTIF. Images can
16GB (option: 3,877 frames @ maximum resolution) Formats be saved with or without image or comment data
32GB (option: 7,761 frames @ maximum resolution)
Data Display Frame Rate, Shutter Speed, Trigger Mode, Date or Time,
Video Output Live and playback video through Dual HD-SDI or Single RS-170 Status (Playback /Record), Real Time, Frame Count and
(NTSC /PAL) outputs. Ability to zoom, pan and tilt within image Resolution
via keypad
Partitioning Up to 64 memory segments for multiple recording in memory
Camera Control Through Optional keypad with integrated viewfinder and Gigabit
Ethernet or RS-422 Data Acquisition Supports Photron MCDL and DAQ
User Preset Four user schedulable camera function controls mounted on the Cooling Actively cooled
Switches camera's rear panel
Operating 0 - 40 degrees (32 - 104 degree F)
Low Light Mode Low light mode drops the frame rate and shutter time to their Temperature
maximum values, while maintaining other set parameters, to
enable users to position and focus the camera Mounting 1 x 1/4 - 20 UNC, 1 x 3/8 - 16 UNC, 6 x M6
Triggering Selectable positive or negative TTL 5Vp-p or switch closure Dimensions 165mm (6.5")H× 153mm (6.02")W× 250mm (9.84")D
Trigger Delay Programmable delay on selected input and output triggers, Weight 15.21 lbs (6.9 kg)
100ns resolution
Timing Internal clock or external source Power 100V - 240V AC ~ 1.5A, 50-60Hz
Requirements DC operation 18- 36 VDC, 100VA