Scribd
Upload
5 views5 pages

Linux Driver Setup Instructions

The document provides step-by-step instructions for installing a Linux driver from a CD. It includes commands to execute in the terminal, setting up the printer in Mozilla Firefox, and configuring printer settings. Users are advised to restart the system if permission issues arise during setup.

Uploaded by

Jha Avinash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views5 pages

Linux Driver Setup Instructions

The document provides step-by-step instructions for installing a Linux driver from a CD. It includes commands to execute in the terminal, setting up the printer in Mozilla Firefox, and configuring printer settings. Users are advised to restart the system if permission issues arise during setup.

Uploaded by

Jha Avinash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Linux driver installation instructions

1、Put the the CD drive file into the desktop, spare.


2、Press “Ctrl+Alt+T”at same time,and open the command window as
shown in the following pic:

3、Execute the command as shown in the following pic:

4、Press Enter till “./POS-80-Series”if you see the following pic that means
the driver installation is completed
5、Open Mozilla Firefox ① like pic below,input 127.0.0.1:631,click
“Printers”Like pic below①

6、Choose the printers which installed just now like pic, below：

7、As shown in the pic below,you can set the printer. At this time if need to
obtain the permission of settings, enter a user name and password then can
go to the next step, here if the permisson window still come, it is recommended
to restart the system and enter user name and password again.

8、The next step to choose the printer’s print port,① means noraml serail port

① means USB port ① means ethernet port,after selected click “continue “to

next step
9、Click“Continue”to next step as default settings

10、Click“Modify Printer”as default settings to finish setting.


11、After waiting for the printer to enter the printer interface, you can
choose to test the printer, pause, and cancel the task as shown in the
following picture.

You might also like