Scribd
Upload
6 views2 pages

22 - Erc

The document outlines an experiment to annotate a schematic and perform an Electrical Rules Check (ERC) using KiCad, specifically for a 555 Astable Timer Circuit. It details the steps for designing the circuit, annotating components, running ERC, resolving errors, and saving the schematic. Expected results include unique reference designators for components and an error-free ERC report, along with a set of questions for further understanding of the process.

Uploaded by

padhiyarjaydeep092
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views2 pages

22 - Erc

The document outlines an experiment to annotate a schematic and perform an Electrical Rules Check (ERC) using KiCad, specifically for a 555 Astable Timer Circuit. It details the steps for designing the circuit, annotating components, running ERC, resolving errors, and saving the schematic. Expected results include unique reference designators for components and an error-free ERC report, along with a set of questions for further understanding of the process.

Uploaded by

padhiyarjaydeep092
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EXPERIMENT NO - 22 DATE :

AIM: Annotate the schematic and perform Electrical Rules Check (ERC) in KiCad. Create and
resolve different electrical errors. Perform annotation and ERC on the same schematic designed
in Practical 20/21.

SOFTWARE REQUIRED: KiCad

STEPS TO PERFORM THE EXPERIMENT:

1. Design the 555 Astable Timer Circuit in KiCad:


1. Design the circuit as per experiment 20/21.
2. Annotate the Schematic:
1. In the schematic editor, go to Tools > Annotate Schematic.
2. In the annotation window:
o Select the option to Annotate all components.
o Choose the annotation order (e.g., left to right, top to bottom).
o Click Annotate.
3. Verify that all components (e.g., R1, R2, C1) have been assigned unique reference
designators.
3. Perform Electrical Rules Check (ERC):
1. In the schematic editor, go to Inspect > Electrical Rules Check (ERC).
2. In the ERC window:
o Click Run ERC.
o Review the list of errors and warnings (if any).
3. Common errors to look for:
o Unconnected pins.
o Missing power connections.
o Incorrect pin connections (e.g., output connected to ground).
4. Resolve the errors by correcting the schematic:
o Connect any unconnected pins.
o Ensure proper power and ground connections.
o Verify pin connections for the 555 Timer IC.

4. Re-run ERC After Corrections:


1. After resolving the errors, run the ERC again to ensure no errors or warnings remain.
2. If warnings are still present, evaluate whether they are critical (e.g., unused pins) and
address them if necessary.
5. Save and Document the Schematic:
1. Save the annotated and error-free schematic.
2. Take screenshots of the annotated schematic and ERC report for documentation.

PCB Designing & Electronics Workshop Page No.:


EXPECTED RESULTS:

1. All components in the schematic should have unique reference designators (e.g., R1, R2,
C1).
2. The ERC should show no errors or critical warnings after corrections.
3. The 555 Astable Timer circuit should be ready for simulation or PCB design.

QUESTIONS:

(1) What is the purpose of annotating a schematic in KiCad?


(2) What are some common errors detected during an Electrical Rules Check (ERC)?
(3) How do you resolve an unconnected pin error in KiCad?
(4) Why is it important to perform an ERC before proceeding to PCB design?
(5) What steps would you take if the ERC reports a missing power connection?
(6) Write your conclusion.

PCB Designing & Electronics Workshop Page No.:

You might also like