WEEK 1 Use Models to Understand IP Networking 151 min.

IP Networking Overview 4

2024 CCNA v1.1 (200-301) Network Models

Application and Transport Layers
4
10
Layer 3, Network Layer 10
This Cisco CCNA v1.1 training prepares you for the 200-301 CCNA v1.1 Layer 2, Data Link Layer 8
exam — the one exam required to earn the Cisco Certified Network Layer 1, Physical Layer 5
Associate certification. While the new CCNA v1.1 exam continues to Validation 22
cover topics like network fundamentals and IP connectivity, the
Understand the Role of a Layer 2 Switch
updates are reflective of the increasing focus on cloud, automation,
and AI in networking. Layer 2 Switching Overview 9
What Does a Layer 2 Switch Look Like? 9
CBT Nuggets course material Hosts and Switches Need to Learn MAC Addresses 5
How IPv4 Hosts Learn MAC Addresses 10
How IPv4 Hosts Learn MAC Addresses (router side) 7
Viewing the MAC Address Table on a Layer 2 Switch 5
Validation 21

Understand the Role of a Layer 3 Router

Intro to understanding a L3 router 1

IP Routing Overview 15
What does a Router Look Like? 6

WEEK 2 151 min.

How L3 Routers Learn About Networks 5
Directly Connected Networks 4
Static Routes 6
 Dynamic Routing Protocols 5 Modular Hierarchy and Scaling 6
Validation 21 The Hierarchical Network Model 8
Enterprise Campus Networks 8
Use APs, NGFWs, and Controllers
Validation 3
Intro to Firewalls, APs, and Controllers 8
Wireless Access Points (APs) 8 Describe the Hierarchical Network Blocks

Power over Ethernet (PoE) Overview 4 Intro 3

Providing PoE From a Cisco Switch 10 The Access Block 6
Controllers for Centralized Management 7 The Distribution Block 5
WLC as an AP Controller 11 The Core Block 5
Next Generation Firewalls (NGFWs) 6 The Aggregation Block 7
Validation 5 The WAN Block 6
The Internet Block 5
Use Layer 4 Transport Protocols
Collapsed Architectures 6
Intro to Layer 4 Transport Protocols 1 Validation 4
Layer 4 Transport Protocols Overview 11
TCP and UDP Port Numbers 10 Describe Network Topology Architectures

Verifying the L4 Protocols in Use 11 Intro 2

TCP vs UDP 7 Three-Tier Architectures 6
Verifying TCP and UDP Behavior 7 Two-Tier Architectures 6
Sequence of Events On a Client Computer 4 Small Office - Home Office (SOHO) Architectures 8
Spine-Leaf Architectures 8
Cloud and On-Premise Architectures 11

WEEK 3 154 min. Validation 5

Validation 21

Describe the Hierarchical Network Model

WEEK 4 Describe Wide Area Network (WAN) Technologies 152 min.
The Need for a Model 5
Intro 2
Basic Topologies 10
Wide Area Networks (WANs) 6
Leased Lines 11 Crossover Cables 6
Ethernet Switching and Metro Ethernet 8
MPLS 10
Validation 5 WEEK 5 153 min.
Crossover Cable Pinouts 5
Describe WAN Topologies and Connectivity
Console/Rollover Cables 5
Intro 2 T1/E1 and T3/E3 Cables 5
WAN Topologies 5 RJ45 Receptacle Termination 8
Sharing Bandwidth and SLAs 8 Validation 4
Lit and Dark Fiber 10
Wireless Bridging 7 Identify Fiber Optics and Cables
L2 WAN Links 5 Intro 2
L3 WAN Links 5 Optics and Cables 8
Validation 5 Optical Transmissions 8
Fiber Connection Demo 6
Identify Copper Cabling and Termination
Signal Loss 5
Intro 2 Single-mode Fiber (SMF) and Multimode Fiber (MMF) 9
Signals Sent over Copper 9 Fiber Cable Demo 3
Shielded and Unshielded Cables 4 Validation 4
Ethernet Cable Types 7
Plenum Cables 4 Identify Transceiver and Cabling Types
Opening an Ethernet Cable 4 Intro 2
Ethernet Pinouts 5 Long Range Transceivers 9
RJ45 Connector Termination 7 Short Range Transceivers 7
Validation 3 Copper Transceivers 2
Transceiver Data Sheets 10
Identify Copper Interface Transmissions
Fiber Connectors 6
Intro 3 Infrastructure Fiber 8
Transmission Pairs 9 Validation 4
 Identify Cisco Transceivers and Compatibility
Ethernet Switches 6
Intro 2
Half-duplex and Full-duplex Operations 9
SFP Technology 10
Ethernet Broadcasts 9
QSFP Technology 8
Validation 3
SFP56 and QSFP56 3
QSFP-DD and QSFP-800DD 4 Configure Ethernet Interface Speed and Duplex
Twinax (DACs) and Active Optical Cables (AOCs) 6
Intro 2
Interface Speeds 9
Confirming Speed Options on Data Sheets 8
WEEK 6 154 min. Auto-Negotiation 7
SFP and QSFP Data Sheets 7
Speed and Duplex Considerations 5
SFP Demo 5
Configure Interface Speed and Duplex 7
Switch Configurations 4
Validation 6
Validation 3

Explain Ethernet Structure and Transmissions

Intro 2 WEEK 7 Identify Interface and Cable Issues 156 min.

Bits, Bytes, and Frames 8 Intro 1

Ethernet Standards 7 L1 Interface Status 6
Layer 2 Ethernet Frame Structure 9 L2 Interface Status 5
Ethernet Transmissions 7 Err-Disabled Status 5
Half-Duplex and Collisions 5 Speed Mismatches 5
Validation 3 Duplex Mismatches 12
Runts and Giants 8
Explain Ethernet Communications
CRC Failures 5
Intro 1 Validation 3
Carrier Sense Multiple Access - Collision 9
Detection (CSMA/CD) Understand IPv4 Addressing
Late Collisions 6
Intro to IPv4 Addressing 1
Collision Domains 7
IPv4 Addressing Overview 10
 IPv4 Dotted Decimal Addresses 4 Subnetting Scenario 9
Numbering Systems: Decimal & Binary 5 Implementing our IP Subnet Addressing 6
Converting Binary to Decimal 3 Validation 18
Converting Decimal to Binary 4
Use IPv4 Variable Length Subnets Masks (VLSM)
Unveiling the Mask 8
Configuring an IP Address on a Router 7 Intro to Use IPv4 Variable Length Subnet Masks 1

Validation 14 Why VLSM is Needed 10

The Starting Point for VLSM Calculations 10
Configure IPv4 Private Addresses Calculating the Rest of the Subnet IDs and Masks 6
with VLSM
Intro to Private IPv4 Addresses 1
VLSM Example Across Octets 15
IPv4 Classes 8
Creating a New VLSM-Based IPv4 Subnetting Plan 9
Private (RFC 1918) IPv4 Addresses 8
Configuring the IPv4 VLSM on Cisco Routers 10
Private IPv4 Address Planning 10
Configuring L3 Router 1 9
Configuring L3 Router 2 6
Configure the Client PC and Default G/W 8 WEEK 9 154 min.
Validation 22

Use Additional IPv4 Addressing

WEEK 8 152 min.
Intro to Additional IPv4 Addresses 1
Validation 18
Additional IPv4 Address Types 11

Use IPv4 Subnetting Unicast Addresses 8

Using Loopbacks 8
Intro to IPv4 Subnetting 1
IPv4 Anycast Addressing 7
IPv4 Subnetting Overview 4
APIPA Link Local IPv4 Address 6
Making the Mask Longer 8
Broadcast Addresses, L3 and L2 9
How Many Bits to Take and the Finger Game 10
Multicast 8
Identify the New Subnet IDs 8
Validation 18
Ranges for Subnets 6
Calculating the Number of Hosts per Subnet 3
 Understand IPv6 Addressing
Virtual Switching 5
Intro to IPv6 Addressing 1
Network Function Virtualization 6
Compare IPv6 to IPv4 10
Data Centers and Cloud 8
Shortcuts for Writing Out IPv6 Addresses 5
Validation 3
IPv6 Address Types 14
EUI-64 for the Host ID 10 Understand L2 Switch Forwarding
Link-Local Addresses 9
Intro 1
Multicast in IPv6 7
Layer 2 switching Overview 13
Building the MAC Address-table 11

WEEK 10 154 min.

Validation 16
WEEK 11 153 min.
Configure IPv6 Addressing MAC Address Aging Time 5
Forwarding to a Known MAC Address 7
Intro to Configuring IPv6 Addressing 1
Forwarding a broadcast to all other ports 8
Game Plan for IPv6 Addressing 7
Flooding Unknown Unicast Frames 9
Configure R1 5
Layer 2 Switches Don't Modify MAC Addresses 8
Configure R2 7
Validation 23
Configure R3 6
Configure PC-1, 2, 3 8 Understand L2 VLANs
Configure Windows Server DC-NUG 5
Intro 1
Configure the Client_PC 13
VLAN Overview 12
Validation 12
VLANs and IP Subnets 8

Explain Virtualization Fundamentals Creating New VLANs 12

Update Configurations, Based on Updated Topology 12
Intro 1
Validation 21
Servers and Applications 7
Bare Metal and Hypervisors 9 Configure Inter VLAN Routing
Data Center Vendors 3
Intro 1
Virtual Machines (VMs) 7
 Inter VLAN Routing Overview 9
Inter VLAN Routing with 1 External Router and 2 8 WEEK 13 158 min.
Physical Interfaces Controlling Which VLANs Are Allowed on the Trunks 8
Inter VLAN Routing Using Router on a Stick (ROAS) 9 Inter VLAN Routing 10
Validation 17

Configure Cisco DTP

WEEK 12 159 min.
ROAS Plan and SW1 Configuration 8 Intro 1

ROAS R1 config 11 Dynamic Trunking Protocol (DTP) Overview 12

Validation 27 Using DTP 10

Disabling DTP 7
Configure a Multi-Layer Switch Confirm Access Ports and SVIs 7

Intro 1 Validation 15

Connecting to the CLI Using a Console Cable 9

Configure Cisco VTP
Initial Configurations for a Switch 11
Configuring a Switched Virtual Interface (SVI) for 13 Intro 2
Management VTP Overview 16
Connecting to a Switch IP Address Through a VTY 8 Preparing 802.1Q Trunks 4
Line
Configure a VTP Domain 11
Converting a Physical Layer 2 Switchport to a L3 6
Routed Port VTP Client and Transparent Modes 5

Enabling IPv4 Routing on a Multi-Layer Switch 5 Testing with SVIs 6

Using L3 SVIs for IP Routing on a Multi-Layer 11 No VLAN, No Forwarding 7

Switch Validation 20
Validation 15

Configure Cisco 802.1Q Trunking

WEEK 14 Configure Cisco EtherChannel 151 min.
Intro 1
802.1 Trunking Overview 8 Intro 1

Configure Trunking 11 EtherChannel, The Big Picture 6

The Cisco Native VLAN 14 EtherChannel Protocol Options 12

 Configure Cisco Voice VLANs
Layer 2 EtherChannel Access Port 21
Intro 2
L2 EtherChannel Trunk Port 12
Voice VLAN Overview 10
L3 EtherChannel Routed Interface 14
Implementing a Voice VLAN 16
Validation 19
Validation 15

Understand Cisco STP

Intro 1
STP Overview 9 WEEK 16 Configure Cisco CDP and LLDP 163 min.

Cisco and Spanning Tree 8 Intro 1

Electing a Root Bridge for Spanning Tree 10 CDP and LLDP Overview 11
Port Roles and States 15 CDP Defaults 10
Non-Root Bridges Get 1 Root Port 13 Use CDP to Learn the IP of a Neighbor 9
Designated Ports and Ports That Will Block 10 Customize CDP 5
Enable LLDP 9
Customize LLDP 8

WEEK 15 151 min. Validation 20

Validation 19
Describe Wireless Principles
Configure Cisco STP Intro 1

Intro 1 What is Wireless Networking? 4

STP Recap 9 Physics of Light 8

Spanning Tree Modifications We May Want to Use 14 Anatomy of RF Waveforms 6

Configure PortFast on an Interface 14 Frequency and Wavelength 8

Enable PortFast Globally 6 Phase 8

Use Rapid-PVST 8 The Electromagnetic Spectrum 9

Controlling the STP Root 11 Validation 3

Validation 26
Describe Wireless Transmissions and Interference

Welcome to Describe Wireless Transmissions and 1

Interference
 Transmissions and Receptions 6 What is Wi-Fi? 8
Carrier Sense Multiple Access - Collision 9 802.11 and 802.11a 4
Avoidance (CSMA/CA)
802.11b and 802.11g 7
RF Interference 7
802.11n (Wi-Fi 4) 8
Collisions and Overlapping Signals 6
802.11ac (Wi-Fi 5) 6
Modulation and Data Encoding 14
802.11ax (Wi-Fi 6 and 6E) 7
Validation 4

WEEK 17 153 min. Describe Wireless Cells and Roaming

Validation 3 Intro 1
APs and Cells 7
Calculate Wireless Measurements
Noise Floor 5
Intro 1
Wireless Transmit Power 7
Introducing the Decibel 7
WEEK 18 152 min.
Decibels and Linearity 7
RSSI and SNR 8
dBm Measurements and Math 7
Station Roaming 6
Wireless dBm Calculations 13
Service Set Identifiers (SSIDs) 5
Validation 6
Basic and Extended Service Sets 6

Explain Wireless Bands and Channels Validation 4

Intro 1 Explain Wireless Security Principles

Wireless Channels 9
Intro 1
Wireless Bands 10
Wireless Security Challenges 8
Bonded Channels 9
Authentication and Encryption 7
Access Point Radios 9
Wi-Fi Protected Access (WPA) 5
Validation 6
WPA Personal and Enterprise 5

Describe Wi-Fi Standards 802.1X and EAP 6

RADIUS and TACACS+ 6
Intro 1
 Validation 3 Validation 4

Explain WPA Operation and Benefits Explain AP Modes of Operation

Intro 2 Intro 1
WPA Encryption 7 Local Mode 6
WPA 4-Way Handshake 5 FlexConnect Mode 7
WPA3 Overview 8 Monitor and Sniffer Modes 8
Simultaneous Authentication of Equals (SAE) 5 Bridge and Flex+Bridge Modes 5
Opportunistic Wireless Encryption (OWE) 7 Access and Trunk Links 7
Validation 8 Validation 8

Describe Wireless Network Components Explain Cisco WLC Architecture

Wireless Intro 1 Intro 2

Access Points (APs) and Stations (STAs) 6 Legacy AireOS Controllers 7
Mesh APs and Bridges 5 Catalyst 9800 Controllers 7
AP Options 6 WLC Discovery 11
Antenna Effects and Types 9 WLC Redundancy 6
Distribution Systems and Media 3 WLC Authentication 5
Wireless LAN Controllers (WLCs) 7 Lightweight Design Considerations 6
Validation 3 Validation 1

Explain Cisco WLC Interfaces for AireOS

Intro 1
WEEK 19 Explain Wireless Network Architectures 155 min.
Physical Ports 8
Intro 1
Logical Interfaces 10
Autonomous Architecture 5
Redundancy Interfaces 6
Lightweight Architecture 7
CAPWAP Tunneling 7
Tunneling and Data Flow 9
WEEK 20 189 min.
Cloud-Managed Architecture 10
Dynamic Interfaces 5 WPA2 Enterprise Configuration 8
AP-Manager Interfaces 7 Quality of Service 4
Validation 5 Validation 8

Explain Cisco WLC Configurations Troubleshoot Cisco Wireless Networks

Welcome to Explain Cisco WLC Configurations! 2 Intro 1

WLC Management 6 Review Quiz 39
WLC GUI Overview 8
AP Connection and Configuration 7
Cisco WLANs 6 WEEK 21 163 min.
VLANs and Dynamic Interfaces 7 Configuration Review 7
AP Groups 4
Validation 3 Configure IPv4 Static Routes

Intro 1
Perform Cisco WLC Initial Configuration
Static Route Overview 15
Intro 1 Confirming Current Topology and Routes 5
Labbing with WLCs 11 Game Plan for Static Routes 9
Initial Configuration - CLI 14 Configure a Static /24 Network Route 6
Switch Configuration 3 Configure a Static /32 Host Route 4
Interface Configuration 4 Default Route 9
AP Connections 9 Validation 18
Validation 1
Describe OSPF
Configure Cisco WLC WLANs
Intro 1
Intro 1 Benefits of Using a Dynamic Routing Protocol 6
WLAN Configuration 12 Overview of OSPF 13
Wireless Security Review 5 Designated Router 4
Security Configuration Options 4 Enable OSPF and Include All Interfaces 12
WPA2-PSK Configuration 3 OSPF Router ID Selection Process 11
 Confirming OSPF Network Types and Timers 10
Identify the DR and BDR for a Network Segment 9 WEEK 23 Understand Administrative Distance 152 min.

Validation 23 Intro 1
Administrative Distance Overview 13
Default Administrative Distances 7

WEEK 22 Configure OSPF 160 min. BGP Administrative Distances of 20 and 200 8
RIP Administrative Distance of 120 7
Intro 1
OSPF and EIGRP Administrative Distances of 110 and 7
Router ID, Interfaces, and DR 4 90
Administratively Configuring an OSPF Router ID 5 Static Routes with an Administrative Distance of 1 5
Adding OSPF Interfaces with Interface Commands 12 Validation 22
Verifying OSPF Enabled Interfaces and IP Routing 5
OSPF Network Statement With All Wildcard Bits On 9 Use IPv4 Floating Static Routes

Using Network Statements for a Group of Interfaces 6 Intro 1

Adding Additional Routers and Interfaces to OSPF 8 Floating Static Route Overview 10
Area 0
Establishing Initial Default Routes 5
Interface Priority Impacts the DR Elections 7
Adding Backup "Floating" Default Routes 9
3rd OSPF Router on a Shared Ethernet Network 5
Subnet Testing Floating Static Routes 7

Validation 24 Floating Static Network Routes 7

Validation 18
Understand OSPF's Cost & Default Route
Use Dual Stack IPv4 and IPv6
Intro 1
OSPF Default Costs and Default Route Overview 12 Intro 1

Interface and Path Cost 10 Game Plan for IPv4 and IPv6 Dual Stack Network 9

Auto Cost Reference Bandwidth 12 Configuring IPv4 Addressing 9

Using a Consistent Reference Bandwidth 7 Configure OSPF Routing for IPv4 6

Changing Interface Cost 5

Default Routes in OSPF 10
Validation 17 WEEK 24 158 min.
Configure IPv6 Global and Link-local Addressing 11
 Use First Hop Redundancy Protocols
Configure Basic IPv6 Routing Using RIP 7
Intro 2
Using IPv6 Anycast 7
First Hop Redundancy Protocol (FHRP) Overview 9
Validation 24
Cisco's Hot Standby Router Protocol (HSRP) 11

Configure Static IPv6 Routes Configure HSRP 10

Testing an HSRP Failover, and Updating to HSRP v2 6
Intro 1
Configure and Test VRRP 10
IPv6 Static Routing Overview 12
Validation 17
Configure Static IPv6 Network Routes 11
Configure a Floating IPv6 Static Route 7 Explain Network Address Translation (NAT)
Configure a Static IPv6 Host Route 8
Intro 2
Configure IPv6 Primary and Floating Static Default 6
Routes Network Address Translation (NAT) 5

Additional Static Routes to All Loopback IPv6 14 Private IP Addressing 10

Addresses NAT Architecture 7
Validation 25 Source and Destination NAT 9
Address Pools and Overload 1
Routes That Must Win Twice
Validation 3
Intro 1
The Winning IPv4 Route Overview 9
Confirming Longest Match Wins, and the Use of AD 6
WEEK 26 Define NAT Operation 152 min.
Equal Cost Routes, AD, and Longest Match Examples 9
Intro 2
NAT Terminology 5
Dynamic NAT 5
WEEK 25 152 min.
Static NAT 6
Calculate the Range of an IPv4 Route 11
Port Address Translation (PAT) 8
Calculate Range Example, and When the Default 6
Route is Used PAT Example 7
Interpreting a Routing Table 5 NAT Address Types 6
The Price of a Route: Cost | Hop Count | Metric 11 Validation 3
Validation 17
 Configure Network Address Translation (NAT) Explain Simple Network Management Protocol (SNMP)

Intro 1 Intro 2
Configuration Overview 4 SNMP Framework 7
Topology and NAT Interfaces 5 SNMP Operation 7
Configure Static NAT 5 SNMP Versions 6
Configure Dynamic NAT 6 SNMPv3 IOS-XE Structure 9
Configure PAT 4 Configure SNMP Parameters 3
Validation 26 Configure SNMPv2c 5
Configure SNMPv3 5
Explain Dynamic Host Configuration Protocol (DHCP)
Validation 3
Intro 1
Dynamic Host Configuration Protocol 7 Configure Syslog and NTP

DHCP Considerations 7 Intro 1

DHCP Process 8 System Logging 10
DHCP Example 7 Syslog Servers 4
DHCP Relay 7 Logging Severity Levels 7
Configure DHCP Relay 6 Buffer and Syslog Logging 5
Validation 16 Console and Terminal Logging 5
Network Time Protocol (NTP) 5
Configure NTP 6

WEEK 27 Explain the Domain Name System (DNS) 165 min. Validation 18

Intro 2
DNS and Resolution 7
DNS Servers and Hierarchy 8 WEEK 28 Configure Cisco Device Management 153 min.

DNS Process 8 Intro 1

DNS on IOS-XE 9 Telnet and SSH 4
Configure DNS 6 VTY Lines 6
Validation 17 VTY at the CLI 4
VTY Security 8
 VTY Configuration 9 Security Concepts 5
Enabling SSH 6 Data Authentication, Privacy, and Integrity 6
Configuring and Testing SSH 3 Logical and Physical Security 5
Validation 17 Password Policies and MFA 9
Network Access Control (NAC) 5
Configure IOS File Management
User Compliance 5
Intro 1 Common Network Attacks 7
IOS Storage System 5 Validation 5
Configurations and NVRAM 8
Managing IOS Files 4 Create Standard IPv4 ACLs

Trivial File Transfer Protocol (TFTP) 7 Intro 1

TFTP and MD5 Demo 8 Access Control List Overview 13
FTP, SFTP, and SCP 4 Capabilities of Standard vs Extended ACLs 10
FTP Demo 3 Creating a Standard Numbered ACL 15
Validation 1 Applying and Testing a Standard ACL 9
Standard Named ACL 10
Describe Network Quality of Service (QoS)
Validation 20
Intro 2
The need for QoS 7 Create Extended IPv4 ACLs

Queuing and Scheduling 10 Intro 1

Classification and Marking 6 Extended ACL Review, and Game Plan 9
L2 and L3 Marking 7 Create an Extended Numbered ACL 21
DSCP Tagging 9
Shaping and Policing 8
Validation 4 WEEK 30 151 min.
Apply and Test the Numbered ACL 13
Create an Extended Named ACL 10

WEEK 29 Describe Network Security Fundamentals 157 min. Validation 32

Intro 1
 Use ACLs with NAT and PAT
Configure R4 as a DHCP server 5
Intro 1
Configure DHCP Relay 7
Overview of ACLs Used with NAT and PAT 6
Enable DHCP Snooping 4
ACL, NAT, and PAT Game Plan 5
Configuring DHCP Snooping Trusted Ports 8
Configure ACLs for Use with Address Translation 9
Using the Snooping Database and Agent 4
Configure IP NAT Interfaces 3
Validation 21
Configure NAT POOL 4
Configure NAT Rules 7 Use Cisco L2 Port Security
Testing the NAT One to One Mappings 8
Intro 1
Testing the PAT/Overload Translations 5
Port Security Overview 20
Validation 23
Configure the Layer 2 Switched Environment 10

Describe Cisco VPNs Configure and then Enable Port Security 12

Intro 1
VPN Overview 12
IPsec Fundamentals 12 WEEK 32 154 min.
Manually Configuring Secure MAC Addresses 9
When Port-Security Interacts with Other Features 14
Validation 23
WEEK 31 162 min.
IPsec Site to Site VPN Example 8 Understand L2 Security Controls
Using ACLs and Hit Counts to Confirm Tunnel Use 9
Intro 1
Creating Static Routes to Send Traffic Through the 8
Tunnel DAI and using DHCP Snooping Binding Information 11

Verifying Results of IPsec Protected GRE Traffic 5 Layer 2 Controls To Protect Spanning Tree Protocol 6
(STP)
Validation 23
Mitigate VLAN Hopping Attacks 9

Use Cisco IPv4 DHCP Snooping Enable DHCP Services and Snooping 12
Configure Dynamic ARP Inspection (DAI) 8
Intro 1
STP BPDU Guard 5
IPv4 DHCP Snooping Overview 9
BPDU Filtering 5
Game Plan for DHCP Services and DHCP Snooping 7
Loop Guard 5
 Understand REST APIs and Data Formats
STP Root Guard 7
Introduction 1
Validation 23
What is an API? 7

Describe Cisco AAA Understanding REST APIs 7

Methods and Headers 9
Intro 1
HTTP Status Codes 7
AAA Concepts 15
HTTP Authentication 1
Understanding Structured Data 9
Data Serialization and JSON 13
WEEK 33 152 min. XML and YAML 5
RADIUS &TACACS+ 10
Exploring RESTCONF 7
AAA Local Authentication of Telnet 16
Validation 4
AAA Local Authentication of SSH 11
Validation 22 Understand Software-Defined Networking

Introduction 1
Understand Automation for Network Management
The Data Plane 5
Introduction to Network Automation 1
The Control and Management Planes 6
What is Network Automation? 9
Software-Defined Networking Fundamentals 9
What should we Automate? 11
Comparing Traditional networks & Controller-based 5
Push vs Pull 9 networks
What is Ansible? 8 Understanding Software-Defined Access 12
Ansible in Action 12 Exploring DNA Center 11
Puppet and Chef 7 Validation 5
What is Terraform? 9
Terraform in Action 15
Artificial Intelligence 8
Validation 4

WEEK 34 124 min.

Last updated 12.3.2024