Occupational code: ICT HNS

1. An agreed/admitted set of rules and procedures for exchanging data between two or more
devices.
A. Network
B. UTP Cable
C. Protocol
D. LAN
2. Network Interface card to check Loop Back using address?
A. 19.168.1.1
B. 10.0.0.5
C. 192.168.0.2
D. 127.0.0.1
3. One of the following are false of switches and bridges?
A. Switches have fewer ports and switch in software.
B. Switches have a higher port density and switch using ASIC hardware.
C. Bridges are faster than switches.
D. Switches are faster than bridges.
4. A device that communicate different IP Address at the same time on the network.
A. Hub
B. Router
C. Repeater
D. Node
5. Calculate subnet mask with IP address 172.16.0.0
A. 172.16.0.0 with subnet mask of 255.240.0.0
B. 172.16.0.0 with subnet mask of 255.255.0.0
C. 172.16.0.0 with subnet mask of 255.255.255.0
D. 172.16.0.0 with subnet mask of 255.0.0.0
6. A set of protocol layers that is designed to make data exchange possible on different types of
computer networks.
A. TCP/IP
B. DNS
C. FTP
D. Printer server
7. It provides means for the local networks to connect the external network.
A. Firewall
B. Default gateways
C. IP Address
D. Net mask
8. A utility program that allows you to check connectivity between network devices on the
network.
A. Ipconfig
B. Attrib –a –s –h –r
C. Ping
D. Cmd
9. The main function of the network service is to provide host name to TCP/IP address
resolution.
Knowledge Assesment for Hardware and Network Servicing L _ III (V_ I) Oct 8 2008
Occupational code: ICT HNS
A. DNS
B. Group User
C. Ethernet.
D. SMTP
10. This protocol deals with all internal mail, and provides the necessary mail delivery service
on TCP/IP protocol stack.
A. E-mail
B. FTP
C. SMTP
D. Transport Layer
11. Transmission speed of LAN around:
A. 150mbps
B. 10mbps
C. 1000mbps
D. 100mbps

12. The best method to restore the latest copy of the registry in a Win 2003
– Server is to select the
A. Emergency Repair Disk (ERD)
B. Recovery Console
C. Last known Good Configuration
D. Ctrl + Alt+ Del keys
13. A device on the network it is also known as physical address or Ethernet address
A. Network Address
B. Mac Address
C. OSI Model
D. Dos
14. Every node uses a common communication link (the trunk, backbone or segment) usually
made fro coaxial cable.
A. Ring
B. Mesh
C. Star
D. Bus
15. Server indicated providing particular resource
A. UTP
B. Network card
C. Mail server
D. Network device
16. The type of network in which data is split into discrete units that are transmitted over the
network individual is.
A. Frame relay

Knowledge Assesment for Hardware and Network Servicing L _ III (V_ I) Oct 8 2008
Occupational code: ICT HNS
B. Packet switching
C. Data encapsulation
D. IP address
17. Network can be classified in to two groups depending on their.
A. Function and money
B. Only depend in size
C. Size and function
D. No depending for any device
18. An IP address class provides for the large number of hosts.
A. Class C
B. Class B
C. Class less
D. Class A
19. A very high speed, high capacity data transmission on the signal and lack of signal
attenuation.
A. Coaxial cable
B. Fiber optic
C. Multi node
D. Single
20. In network topology the same number of links and number of node.
A. Star
B. Tree network topology
C. Bus
D. Star bus topology
21. A type of routing is used by a packet in which the destination IP address and the data-link
layer destination address values refer to different computers
A. The default gateway
B. An indirect route
C. The default route
D. A direct route

Knowledge Assesment for Hardware and Network Servicing L _ III (V_ I) Oct 8 2008
Occupational code: ICT HNS

SECTION B – MATCHING TYPE QUESTIONS

Instructions for Section B

1. There are fifteen [_15_] questions in this section.

2. Match column A with column B. Select the letter of the correct answer from column B and write your
answer on the provided space of separate answer sheet.
3. If you wish to change your answer place an x mark on your previous answer and write your preferred
answer
4. A correct answer scores 1, an incorrect answer scores 0. No marks will be given for a question if more than
one answer is supplied

Column A Column B
______ 1. Router A. wireless transmission

______ 2.Peer to peer B. higher

______ 3. Passive topology C. it forwards packets from LAN to another LAN

______ 4. Network D. display full configuration information

______ 5. Error rate of WAN E. session layer

______ 6. Repeater F. two or more computers connected and share resource

______ 7. Logical topology G. a media that carries only one signal

______ 8. IPCONFIG/all H. describe how to the network message travels

______ 9. Baseband I. no indicated server

______ 10. Unguided J. star

______ 11. Dialog separation K. amplifier signals

______ 12. UTP L. open source UNIX version

______ 13. Intelligent hub M. single mode fiber optic

______ 14. LINUX N. contains eight wires

______ 15.Use a laser to generate signals O. used to send reports network management console

Knowledge Assesment for Hardware and Network Servicing L _ III (V_ I) Oct 8 2008