Scribd
Upload
4 views6 pages

Driver

This document provides a step-by-step guide for installing a GCC cutting plotter on a Windows computer. It includes instructions for accessing the printer setup, selecting the appropriate driver, and completing the installation process. The final step confirms the successful installation of the cutter.

Uploaded by

Niltomar de Morais Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views6 pages

Driver

This document provides a step-by-step guide for installing a GCC cutting plotter on a Windows computer. It includes instructions for accessing the printer setup, selecting the appropriate driver, and completing the installation process. The final step confirms the successful installation of the cutter.

Uploaded by

Niltomar de Morais Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Step 1.

Click the "start" menu on the Windows tool bar and click on the "Printers and Faxes"
command to start the setup.

Step 2. Select "Add a printer" to go to next step.


Step 3. Once you see the "Add Printer Wizard" as the screen, click "Next" to proceed. You
will be guided through each step of the installation process.

Step 4. Select "Local printer attached to this computer" option. Then, click "Next" to go
to next step.
Step 5. Select "LPT1" as the printer Port then click "Next".

Step 6. Click "Have Disk" to proceed to the next step.


Step 7. Click "Browse" and select a suitable Driver version for your specific Windows operating
system from your GCC CD-ROM disk. Then, click "OK" to move on to the next step.

Step 8. Select the model of cutting plotter you are installing. Then, click "Next" to go to next
step. (Note: If you are installing a new GCC cutting plotter, please go to the Step 9-1, otherwise
please skip to Step 9-2.)
Step 9-1. You can use the default name or specify a new name a new for your cutter. Select
"Yes" to set your cutter as the default printer before clicking "Next".

Step 9-2. Select "Replace existing driver" and click "Next".


Step 10. Select “No” not to print a test page. Then, click "Next" to go to next step.

Step 11. Congratulations. You have completed the installation of your GCC cutter. Click
"Finish".

You might also like