Scribd
Upload
3 views

solution

The document provides material properties including tensile strength, elongation at break, flexural modulus, density, and coefficient of friction. It also details beam dimensions and forces related to beam deflection, assembly, and retention. The initial beam deflection force is 48 N, the assembly force is 59.19 N, and the retention force is 107.62 N.

Uploaded by

Sailesh Bastol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

solution

The document provides material properties including tensile strength, elongation at break, flexural modulus, density, and coefficient of friction. It also details beam dimensions and forces related to beam deflection, assembly, and retention. The initial beam deflection force is 48 N, the assembly force is 59.19 N, and the retention force is 107.62 N.

Uploaded by

Sailesh Bastol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Given

Tensile Strength: 40-50 MPa

o Elongation at Break: 10-50%

o Flexural Modulus (E): 2.1-2.7 GPa (use 2.4 GPa for calculations)

o Density: 1.04-1.06 g/cm³

o Coefficient of Friction (μ): 0.5-0.6

Beam Length(Lb): 10

Beam Width(Wb):8

Beam Thickness(Tb):2

Aspect Ratio (L/T)=5

Magnification factor(Q)(wall Deflection)= 1.95(From table below Beam perpendicular to wall


and parallel at edge)
THE MATING FORCE

a) Initial Beam Deflection Force =48 N

b) Assembly Force=59.19 N

c) Retention Force=107.62 N

You might also like