Scribd
Upload
4 views14 pages

Lecture 10

Lecture 10 covers the sampling of continuous-time signals and their reconstruction into discrete-time systems, emphasizing the importance of the Nyquist rate for accurate signal representation. Key concepts include impulse train sampling, the effects of sampling on frequency decomposition, and the use of zero-order hold for signal reconstruction. The lecture highlights that signals must be sampled at a rate greater than twice the maximum frequency to avoid loss of information.

Uploaded by

Osii C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views14 pages

Lecture 10

Lecture 10 covers the sampling of continuous-time signals and their reconstruction into discrete-time systems, emphasizing the importance of the Nyquist rate for accurate signal representation. Key concepts include impulse train sampling, the effects of sampling on frequency decomposition, and the use of zero-order hold for signal reconstruction. The lecture highlights that signals must be sampled at a rate greater than twice the maximum frequency to avoid loss of information.

Uploaded by

Osii C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Signals & System

Lecture 10
Sampling Discrete-Time Systems

Dr. Tahir Zaidi


Lecture 10: Sampling Discrete-Time Systems
Sampling & Discrete-time systems (2 lectures):
Sampling theorem, discrete Fourier transform

Specific objectives for today:


• Sampling of a continuous-time signal
• Reconstruction of the signals from its samples
• Sampling theorem & Nyquist rate
• Reconstruction of a signal, using zero-order holds

2/13
Lecture 10: Resources
Core reading
SaS, O&W, C7

Background reading
MIT Lectures 9 & 13

In these two lectures, we’re going to develop the DT


Fourier transform as a sampled version of the CT
Fourier transform.
Note that this is opposite to time-domain convolution
where we developed CT convolution as the limiting
case of DT convolution

3/13
What is Discrete Time Sampling?
Sampling is the transformation of a continuous signal
into a discrete signal
x(t), T is the sampling
x[n] period

t=nT
Widely applied in digital analysis systems
x(t) Discrete x[n] Discrete y[n] Signal y(t)
Time sampler time system reconstruction

1. Sample the continuous time signal


2. Design and process discrete time signal
3. Convert back to continuous time

4/13
Why is Sampling Important?
For many systems (e.g. Matlab, …) designing and
processing discrete-time systems is more efficient and
more general compared to performing continuous-time
system design.
How does Simulink perform continuous-time system
simulation?
The signals are sampled and the systems are approximately
integrated in discrete time

Mainly due to the dramatic development of digital technology


resulting in inexpensive, lightweight, programmable and
reproducible discrete-time systems. Widely used for
communication

5/13
Sampling a Continuous-Time Signal
Clearly for a finite sample period T, it is not possible to represent
every uncountable, infinite-dimensional continuous-time signal
with a countable, infinite-dimensional discrete-time signal.

x1(t),
x2(t),
x3(t),
x[n]

t=nT

In general, an infinite number of CT signals can generate a DT


signal.
However, if the signal is band (frequency) limited, and the
samples are sufficiently close, it is possible to uniquely
reconstruct the original CT signal from the sampled signal
6/13
Definition of Impulse Train Sampling
We need to have a convenient way in
which to represent the sampling of a
CT signal at regular intervals
A common/useful way to do this is
through the use of a periodic impulse
train signal, p(t), multiplied by the CT
signal
x p (t )  x(t ) p(t )
p(t )  n   (t  nT )
 T

T is the sampling period


ws=2p/T is the sampling frequency
This is known as impulse train
sampling. Note xp(t) is still a
continuous time signal
7/13
Analysing Impulse Train Sampling (i)
What effect does this sampling have on the frequency decomposition
(Fourier transform) of the CT impulse train signal xp(t)?
By definition:  
x p (t )   x(t ) (t  nT )   x(nT ) (t  nT )
n   n  
The signal p(t) is periodic and the coefficients of the Fourier
Series are given by:
T /2
ak  1
T 
T / 2
 (t )e  jkw t dt  T1 ,
0
k
Therefore, the Fourier transform is given by

P( jw )  2p
T   (w  kw )
k  
s

One property of the Fourier transform we did not consider is the


multiplicative property which says if xp(t) = x(t)p(t), then

X p ( jw )  1
2p  
X ( j ) P( j (w   ))d

8/13
Analysing Impulse Train Sampling (ii)
Substituting for P(jw)

X ( j )k    ((w  kws )   )d

X p ( jw )  1
T 




 1
T 
k    
X ( j ) ((w  kws )   )d



 1
T k  
X ( j (w  kws ))
Therefore Xp(jw) is a periodic function of w, consisting of a
superposition of shifted replicas of X(jw), scaled by 1/T.
|X(jw)|=0: |w|>1 ws=3

9/13
Reconstruction of the CT Signal
When the sampling frequency 1
ws is less than twice the wM=1
band-limited frequency wM,
there is no overlaps the 1/T
spectrum X(jw) ws=3
If this is true, the original
signal x(t) can be
T
recovered from the impulse
sampled xp(t), by passing it
through a low pass filter
H(jw) with gain T and cutoff 1

frequency between wM and


ws-wM.

10/13
Sampling Theorem
Let x(t) be a band (frequency)-limited signal
X(jw) = 0 for |w|>wM.

Then x(t) is uniquely determined by its samples {x(nT)}


when the sampling frequency satisfies: X(jw)
ws  2wM
where ws=2p/T. ws
-wM wM w
2wM is known as the Nyquist rate, as it represents the
largest frequency that can be reproduced with the sample
time
The result makes sense because a frequency-limited signal
has a limited amount of information that can be fully
captured with the sampled sequence {x(nT)}

11/13
Zero Order Hold Sampling
A zero order hold is a common method
for bridging CT-DT signals
x(t)
A zero order hold samples the current
signal and holds that value until the
next sample t

In most systems, it is difficult to generate


and transmit narrow, large-amplitude xp(t)
pulses (impulse train sampling) xp(t)

We can often use a variety of t


filtering/interpolation techniques to
reconstruct the original time-domain
signal, however often the zero-order x0(t)
hold signal x0(t) is sufficiently
accurate
t

12/13
Lecture 10: Summary
The sample time for converting a continuous time signal into
a sampled, discrete time signal is determined by the
Nyquist rate, amongst other things.
The signal must satisfy the relationship:
ws  2wM
If the signal is to be preserved exactly. Information in
frequencies higher than this will be lost when the signal is
sampled.
A continuous time signal is often sampled and communicated
using a zero order hold
Often this is enough to be considered as the re-constructed
continuous time signal, but sometimes approximate
methods for re-constructing the signal are used

13/13
Lecture 10: Exercises
Theory
SaS, O&W, 7.1-7.4, 7.7

14/13

You might also like