Scribd
Upload
0 views

Computer Memory

The document provides an overview of computer memory, detailing its types: Cache Memory, Primary Memory (RAM and ROM), and Secondary Memory. It explains the characteristics, advantages, and disadvantages of each memory type, highlighting the differences between volatile and non-volatile memories. Additionally, it discusses specific types of RAM (SRAM and DRAM) and ROM (MROM, PROM, EPROM, EEPROM) along with their unique features.

Uploaded by

yanndjoko1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0 views

Computer Memory

The document provides an overview of computer memory, detailing its types: Cache Memory, Primary Memory (RAM and ROM), and Secondary Memory. It explains the characteristics, advantages, and disadvantages of each memory type, highlighting the differences between volatile and non-volatile memories. Additionally, it discusses specific types of RAM (SRAM and DRAM) and ROM (MROM, PROM, EPROM, EEPROM) along with their unique features.

Uploaded by

yanndjoko1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

COMPUTER ARCHITECTURE: COMPUTER MEMORY

GENERAL INTRODUCTION
A memory is just like a human brain. It is used to store data and instructions. Computer
memory is the storage space in the computer, where data is to be processed and instructions
required for processing are stored. The memory is divided into large number of small parts
called cells. Each location or cell has a unique address, which varies from zero to memory
size minus one. For example, if the computer has 64k words, then this memory unit has 64 *
1024 = 65536 memory locations. The address of these locations varies from 0 to 65535.

Memory is primarily of three types −

 Cache Memory
 Primary Memory/Main Memory
 Secondary Memory

Cache Memory
Cache memory is a very high speed semiconductor memory which can speed up the CPU. It
acts as a buffer between the CPU and the main memory. It is used to hold those parts of data
and program which are most frequently used by the CPU. The parts of data and programs are
transferred from the disk to cache memory by the operating system, from where the CPU can
access them.

Advantages

The advantages of cache memory are as follows −

 Cache memory is faster than main memory.


 It consumes less access time as compared to main memory.
 It stores the program that can be executed within a short period of time.
 It stores data for temporary use.
BY TSEKANE ADI L. 1
COMPUTER ARCHITECTURE: COMPUTER MEMORY

Disadvantages

The disadvantages of cache memory are as follows −

 Cache memory has limited capacity.


 It is very expensive.

Primary Memory (Main Memory)


Primary memory holds only those data and instructions on which the computer is currently
working. It has a limited capacity and data is lost when power is switched off. It is generally
made up of semiconductor device. These memories are not as fast as registers. The data and
instruction required to be processed resides in the main memory. It is divided into two
subcategories RAM and ROM.

Characteristics of Main Memory

 These are semiconductor memories.


 It is known as the main memory.
 Usually volatile memory.
 Data is lost in case power is switched off.
 It is the working memory of the computer.
 Faster than secondary memories.
 A computer cannot run without the primary memory.

Secondary Memory
This type of memory is also known as external memory or non-volatile. It is slower than the
main memory. These are used for storing data/information permanently. CPU directly does
not access these memories, instead they are accessed via input-output routines. The contents
of secondary memories are first transferred to the main memory, and then the CPU can access
it. For example, disk, CD-ROM, DVD, etc.

BY TSEKANE ADI L. 2
COMPUTER ARCHITECTURE: COMPUTER MEMORY

Characteristics of Secondary Memory

 These are magnetic and optical memories.


 It is known as the backup memory.
 It is a non-volatile memory.
 Data is permanently stored even if power is switched off.
 It is used for storage of data in a computer.
 Computer may run without the secondary memory.
 Slower than primary memories.

Random Access Memory


RAM (Random Access Memory) is the internal memory of the CPU for storing data,
program, and program result. It is a read/write memory which stores data until the machine is
working. As soon as the machine is switched off, data is erased.

Access time in RAM is independent of the address, that is, each storage location inside the
memory is as easy to reach as other locations and takes the same amount of time. Data in the
RAM can be accessed randomly but it is very expensive.

RAM is volatile, i.e. data stored in it is lost when we switch off the computer or if there is a
power failure. Hence, a backup Uninterruptible Power System (UPS) is often used with

BY TSEKANE ADI L. 3
COMPUTER ARCHITECTURE: COMPUTER MEMORY

computers. RAM is small, both in terms of its physical size and in the amount of data it can
hold.

RAM is of two types −

 Static RAM (SRAM)


 Dynamic RAM (DRAM)

Static RAM (SRAM)


The word static indicates that the memory retains its contents as long as power is being
supplied. However, data is lost when the power gets down due to volatile nature. SRAM chips
use a matrix of 6-transistors and no capacitors. Transistors do not require power to prevent
leakage, so SRAM need not be refreshed on a regular basis.

There is extra space in the matrix, hence SRAM uses more chips than DRAM for the same
amount of storage space, making the manufacturing costs higher. SRAM is thus used as cache
memory and has very fast access.

Characteristic of Static RAM

 Long life
 No need to refresh
 Faster
 Used as cache memory
 Large size
 Expensive
 High power consumption

Dynamic RAM (DRAM)


DRAM, unlike SRAM, must be continually refreshed in order to maintain the data. This is
done by placing the memory on a refresh circuit that rewrites the data several hundred times
per second. DRAM is used for most system memory as it is cheap and small. All DRAMs are
made up of memory cells, which are composed of one capacitor and one transistor.

Characteristics of Dynamic RAM

 Short data lifetime


 Needs to be refreshed continuously
 Slower as compared to SRAM
 Used as RAM
 Smaller in size
 Less expensive
 Less power consumption

BY TSEKANE ADI L. 4
COMPUTER ARCHITECTURE: COMPUTER MEMORY

Read Only Memory


ROM stands for Read Only Memory. The memory from which we can only read but cannot
write on it. This type of memory is non-volatile. The information is stored permanently in
such memories during manufacture. A ROM stores such instructions that are required to start
a computer. This operation is referred to as bootstrap. ROM chips are not only used in the
computer but also in other electronic items like washing machine and microwave oven.

Let us now discuss the various types of ROMs and their characteristics.

MROM (Masked ROM)


The very first ROMs were hard-wired devices that contained a pre-programmed set of data or
instructions. These kind of ROMs are known as masked ROMs, which are inexpensive.

PROM (Programmable Read Only Memory)


PROM is read-only memory that can be modified only once by a user. The user buys a blank
PROM and enters the desired contents using a PROM program. Inside the PROM chip, there
are small fuses which are burnt open during programming. It can be programmed only once
and is not erasable.

EPROM (Erasable and Programmable Read Only


Memory)
EPROM can be erased by exposing it to ultra-violet light for a duration of up to 40 minutes.
Usually, an EPROM eraser achieves this function. During programming, an electrical charge
is trapped in an insulated gate region. The charge is retained for more than 10 years because
the charge has no leakage path. For erasing this charge, ultra-violet light is passed through a

BY TSEKANE ADI L. 5
COMPUTER ARCHITECTURE: COMPUTER MEMORY

quartz crystal window (lid). This exposure to ultra-violet light dissipates the charge. During
normal use, the quartz lid is sealed with a sticker.

EEPROM (Electrically Erasable and Programmable Read


Only Memory)
EEPROM is programmed and erased electrically. It can be erased and reprogrammed about
ten thousand times. Both erasing and programming take about 4 to 10 ms (millisecond). In
EEPROM, any location can be selectively erased and programmed. EEPROMs can be erased
one byte at a time, rather than erasing the entire chip. Hence, the process of reprogramming is
flexible but slow.

Advantages of ROM
The advantages of ROM are as follows −

 Non-volatile in nature
 Cannot be accidentally changed
 Cheaper than RAMs
 Easy to test
 More reliable than RAMs
 Static and do not require refreshing
 Contents are always known and can be verified

BY TSEKANE ADI L. 6

You might also like