Scribd
Upload
4 views

Software and Hardware Connection Guide

This document provides a guide for operating the MEGA machine using M-Design Hub V1.0.0 software, including minimum and recommended PC requirements. It outlines the installation process for the software and instructions for connecting the device via USB and Wi-Fi. Users are advised to follow specific steps for optimal performance and connectivity.

Uploaded by

393625137
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Software and Hardware Connection Guide

This document provides a guide for operating the MEGA machine using M-Design Hub V1.0.0 software, including minimum and recommended PC requirements. It outlines the installation process for the software and instructions for connecting the device via USB and Wi-Fi. Users are advised to follow specific steps for optimal performance and connectivity.

Uploaded by

393625137
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Software and Hardware Connection

Guide
This page provides instructions on how to operate the MEGA machine using M-Design
Hub V1.0.0 software.

Minimum and Recommended PC Requirements

(Note: These requirements may be updated based on the final release version.)

Component Minimum Configuration Recommended


Configuration

Processor Intel Core i5-6200U Intel Core i5-11600 or


higher

Operating System Windows 10 (64-bit)


macOS 10.15 or higher

Memory (RAM) 8 GB 16 GB or more

Display Resolution 1280 × 720 (pixels) 1920 × 1080 (pixels) or


higher

Hard Disk 8 GB 12 GB or more

● The M-Design Hub software will function correctly, but when importing or editing
complex images, performance might be slower or there could be issues with smooth
operation.
● MEGA may still run, but issues like lag or crashes may occur more frequently, leading to
poor experience. Technical support may not resolve these issues.
● MEGA will perform more smoothly, especially when handling complex images. You’ll
experience reduced lag and better overall performance. However, even with
recommended specs, very complex images may still cause some delays.
● When running MEGA on a laptop, it’s recommended to keep the laptop connected to
power and turn off any energy-saving modes for optimal performance.

1/7
Download and Install M-Design Hub Software

1. Download the M-Design Hub Software



2. Installation Process:
○ Double-click the downloaded software file to begin the installation.
○ When prompted with "Do you want to allow this app to make changes to your
device?", click Yes and continue with the installation.

Connect the Device

Note:
No matter how you choose to connect your device to the MEGA client on your computer
(via USB or Wi-Fi), the first connection must be done via a USB cable to configure the
network settings. After connecting the device via Wi-Fi, you will not need the USB cable
for future connections to MEGA.

USB Connection

1. Open the M-Design Hub software on your computer.

2. Use the USB cable to connect the device to the computer and turn on the MEGA
device.

2/7
3. Click on "Select Machine" in the M-Design Hub software.

Notes:

○ All devices previously connected and used in the project will appear in the device
list.
○ If the device was previously linked and is still in the correct state, the software will
automatically attempt to connect to it.
○ Choose Your Device
Select the device from the list that appears.

3/7
Wi-Fi Connection

1. Refer to the USB Connection steps to initially connect your device to the MEGA
software via USB.
2. Access the device settings window, then click on Network Settings next to Wi-Fi
Settings.

4/7
3. Input your Wi-Fi network name and password to complete the Wi-Fi setup.

5/7
After successfully connecting to Wi-Fi, the device will appear under the Wi-Fi tab. For
future connections, you won’t need to connect via USB — you can directly connect to the
device over Wi-Fi.

6/7
7/7

You might also like