COMPRESSED AIR DRYERS

INSTRUCTION
MANUAL
MK-US SERIES (MK-US 10 to MK-US 5000)

WARRANTY NOTICE

Failure to follow the instructions and pro-

cedures in this manual or misuse of this
equipment will VOID its warranty !
Page 2
TABLE OF CONTENTS

1. IMPORTANT SAFETY NOTES - Please read ........ 6

1.1. Transportation ............................................................. 6

1.2 Positioning ................................................................... 6
1.3 Installation .................................................................... 6
1.4 Before operating ........................................................ 6
1.5 Qualified service personnel .................................... 7
1.6 Maintenance by the user ......................................... 7

2. INTRODUCTION TO THE MK-US DRYER ................ 7

3. OPERATION .................................................................. 11

4. ELECTRICAL CONTROLLER ................................... 13

4.1 Digi-Pro ......................................................................... 13
4.2 ESD 3.............................................................................. 15

5. TECHNICAL SPECIFICATIONS................................. 21

6. DIAGRAMS..................................................................... 22
6.1 Air Flow Diagrams....................................................... 22
6.2 Electrical Diagrams..................................................... 26

7. ID DIAGRAMS................................................................ 45
GENERAL ARRANGEMENTS..................................... 76

8. EXPLODED DIAGRAMS ............................................. 77

9. COMPONENTS LOCATION ..................................... 138

10. TROUBLESHOOTING ................................................ 139

11. WARRANTY .................................................................. 141

Page 3
 Declaration of Conformity
PED 2014/68/EU
(NB No : 0408)

Manufacturer Mikropor Filters

I.OSB Büyük Selçuklu Caddesi, No:4 06935 Ankara/Tur-
key
Phone: 0312 267 0770
Fax: 0312 267 0552

Product Description Air Dryer

MK-US 10 (...), MK-US 15 (...), MK-US 25 (...), MK-US 35 (...),
MK-US 60 (...), MK-US 75 (...), MK-US 100 (...), MK-US 125
(...), MK-US 140 (...), MK-US 175 (...), MK-US 200 (...), MK-US
Serial No of Set (device) 250 (...), MK-US 350 (...), MK-US 425 (...), MK-US 550 (...),
MK-US 700 (...), MK-US 900 (...), MK-US 1100 (...), MK-US
Type of Product 1350 (...), MK-US 1500 (...), MK-US 2000 (...), MK-US 2350
(...), MK-US 2750 (...), MK-US 3000 (...), MK-US 3600 (...),
Module MK-US 4000 (...), MK-US 5000 (...),

0117MA00001 to 5217MA99999

CAT II Air Dryer

Module A2

Assesment Modele Module A2 type compatibility

Confirmed By Notified Body No 0408

TÜV Austria Service GMBH Addres; Deutschstreasse 10 1230 Wien/Österreich
Kind of inspection certification supplied stan- PED (2014/68/EU) Certification EN378-2
dards
Certificate No: ZSTS / SWZE / 1790
Modules for compatibility assesment of pres-
sure in-build elements;

Exchanger CAT II MODUL A2

Receiver CAT I MODUL A2
Separator CAT I MODUL A2
Compressor CAT I MODUL A2

Product Responsibility Mikropor Filter is responsible for product in conditions it

was delivered. Any modifications are forbidden.
Product be operated according to its application. In case
of breaking above conditions realized manufacturer from
responsibility for the product CE mark of the product will
be not valid.

Signature

Local Quality Manager, Pressure Vessel Ahmet Emin ÇAMLIBEL

Date; 29.03.2017

Page 4
EC DECLARATION OF CONFORMITY
MANUFACTURER
NAME : MİKROPOR MAK. SAN. VE TİC. A.Ş.
ADDRESS : Organize Sanayi Bölgesi Büyük Selçuklu Bulvarı No. 4, 06935, Ankara - Türkiye
TEL : +90 312 267 07 00 FAX: +90 312 267 05 52 WEB: www.mikropor.com.tr

Name and Address of the

Person authorised to compile the technical file : Ahmet Emin ÇAMLIBEL
Organize Sanayi Bölgesi Büyük Selçuklu
Bulvarı No. 4, 06935, Ankara -Türkiye

The undersigned declares that the described products meet the essential requirements of the below
mentioned standards as based on Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/
EU, Electromagnetic Compatibility Directive 2014/30/EU

The item of equipments which identified below has been subject to internal manufacturing checks
with monitoring of the final assesment by Mikropor

MACHINE DESCRIPTION MODELS : Air Dryer

MK-US 10 (...), MK-US 15 (...), MK-US 25 (...), MK-US 35 (...), MK-US 60 (...), MK-US 75 (...), MK-US 100 (...),
MK-US 125 (...), MK-US 140 (...), MK-US 175 (...), MK-US 200 (...), MK-US 250 (...), MK-US 350 (...), MK-
US 425 (...), MK-US 550 (...), MK-US 700 (...), MK-US 900 (...), MK-US 1100 (...), MK-US 1350 (...), MK-US
1500 (...), MK-US 2000 (...), MK-US 2350 (...), MK-US 2750 (...), MK-US 3000 (...), MK-US 3600 (...), MK-US
4000 (...), MK-US 5000 (...),

Serial No of Set (device): 0117MA00001 to 5217MA99999

APPLICABLE DIRECTIVES :

2006/42/EC MACHINE SAFETY DIRECTIVE

2014/35/EU LOW VOLTAGE DIRECTIVE
2014/30/EU ELECTROMAGNETIC COMPATIBILITY DIRECTIVE

Certificate No: 16-PS-0279-TAT-16-MAD-1059

APPLICABLE REGULATIONS :
EN ISO 12100:2010; EN 60204-1:2006/AC:2010; EN 61000-6-2:2005; EN 61000-6-4:2007+A1:2011
EN 378-2

SIGNED ON BE HALF OF THE MANUFACTURER

NAME : Mustafa Uslu

POSITION : R&D Manager
PLACE/ DATE : ANKARA / 03.04.2017

SIGNATURE :

Page 5
 I. IMPORTANT SAFETY NOTES Please READ
When operating the air dryer the operator must apply safe working methods and observe all local
safety instructions and relevant regulations.

A) Prior to installation, the dryer and the compressed air system are to be depressurized and
disconnected from the electrical main supply.
B) The user is responsible for safe operating conditions. Parts and accessories must be replaced if
inspection shows that safe operation cannot be assured.
C) Installation, operation, maintenance and repair are only to be authorized, trained and skilled
engineers.
D) The minimum and maximum values stated must be observed, as well as all of the safety precautions
described in this manual.
E) If any statement in this manual does not comply with the local legislation, the strongest standard is to be
applied.

1.1. Transportation
A) Use care and caution when transporting the dryer. Avoid dropping and other physical abuse.
B) A forklift can be used to transport the dryers provided the forks are long enough to support its full width
or length and caution is used throughout the move.

1.2. Positioning
A) The dryer must be installed horizontally. A minimum of 19.6 in. clearance around the dryer is necessary
to allow a good ventilation and easy access for servicing.
B) The ambient temperature in the room should not exceed 113°F and should not be below 39.2°F, taking
the heat radiated by the dryer into account.
C) (40 watt for each liter/sec under ISO 7183-A condition or 18 watts for each SCFM under ISO 7183-B
condition).
D) There should be no chemicals in the atmosphere that will damage the copper source. (Ammonia gas
etc.)

1.3. Installation
In addition to the general mechanical construction procedures and local regulations, the following
instructions need to be emphasized:

1) Only authorized, trained and skilled engineers should install the compressed air dryer.
2) Safety devices, protecting covers or insulation in the dryers never to be dismantled or modified.
Each pressure vessel or accessory installed outside the dryer with air above atmospheric pressure must be
fitted with the required pressure relief safety valves.

1.4. Before Operating

The following points must be observed before operating the air dryer:

A) Review all safety precautions.

B) The dryer connection piping measurements must be selected correctly. (See Technical specifications)
C) The dryer connection piping must be adapted to the operating pressure. (See Technical specifications)
D) Never operate the dryer at pressure above the maximum specified on the dryer label (check the
technical specs too).
E) The drains should be opened to atmosphere. If the drains are connected to a pipe / hose, the diameter
of the hose / pipe should be large enough to create no back pressure during drain. It is not recommended
to reduce the diameter of the hose / pipe less than port that is given at the drain outlet of the unit.
The hose / pipe should be at atmospheric pressure at all time. Back pressure in relevant pipe will result in
permanent damage on drain system and the affect function of the filters and / or dryers.

Page 6
1.5. Qualified service personnel
A) Maintenance and repairs should only be performed when the air dryer is shut down and depressurized
and when the main power switch is turned off.

B) Use only the appropriate tools for maintenance and repair.

C) Before dismantling a part under pressure, disconnect the pressure sources and depressurize the
system.

D) Proceed carefully during maintenance and repair. Prevent dirt from entering by covering parts and
orifices with a clean cloth, paper or tape. A receiver should never be welded or modified in any way.

E) Never leave tools, loose parts or cleaning rags in or on the air dryer.

F) Before returning the dryer into service, check the setting of the control and safety devices as well as the
pressure and the temperature of the compressed air circuit.

1.6. Maintenance by the user

A) Keep the dryer clean.

B) Regularly check the correct operation of the condensate drain trap.

C) Every six months, check and clean the drain strainer by undoing the access screw and rinsing the filter
with tap water to remove the trapped dirt from the inside.

D) For aircooled dryers, clean the air condenser as soon as it’s dirty or clogged.

E) For optional water-cooled condensers, use only clean water andinstall a water filter if needed. Use
water counter flow to clean condenser if need.

F) Check the trouble-shooting list in case of maintenance troubles.

G) Check operating pressures, temperatures and time settings after maintenance. If operating and safety
devices function properly, the air dryer may be used.

2. INTRODUCTION TO THE DRYER

A) Manufacturer:
MiKROPOR / www.mikropor.com

B) Purpose of this dryer

1) This refrigerated compressed air dryer has been designed to remove water vapor from industrial
compressed air.
2) This dryer has been designed for indoor operation.
3) The minimum and maximum values stated must be observed, as well as the safety precautions
described in this manual.

Page 7
C) Dryer label
The following label is affixed on the cabinet of the refrigerant compressed air dryer.

Dryer label describtions

Mikropor America Inc. Model No: Dryer model no
251 N.Roeske Avenue Michigan City, IN 46360 MODEL NO: MKUS Serial No: Dryer serial no
www.mikroporamerica.com
SERIAL NO: Max Refrigerant Pressure: Dryer maximum working pressure
Max. Refrigerant Pressure Voltage Max. Air Pressure: Maximum air pressure
Max. Air Inlet Temp: Maximum air inlet temperature
Max. Air Pressure P Rating
Min. Ambient Temp. : Minimum ambient temperature
Max. Air Inlet Temp. Refrigerant R134a Max. Ambient Temp. : Maximum ambient temperature
Min. Ambient Temp. Weight MKUS Min. Circuit Ampacity : Maximum allowed amount of current
Max. Ambient Temp.
Max Protective Device Rating : Maximum protective device rating
Min. Circuit Ampacity Fan
Voltage : Main supply voltage
Max. Protective Device Rating Compressor IP Rating : Protection rating
Refrigerant 134a : Amount of refrigerant gas used
Weight : Dryer weight
Fan : Model of fan used
Compressor : Model of compressor used

D) Working details
1) Refrigerant circuit:
The refrigerant circuit can be divided in 3 parts:

A) Low pressure section with an evaporator (heat exchanger)

B) High-pressure section including: Condenser, liquid receiver, (if installed) and the filter dryer.
C) Control circuit including: Compressor, Expansion valve, by-pass valve (if installed),
Fan pressure switch (if installed)

2) For water - cooled dryers:

A) Water valve
B) Safety high pressure switch (if installed)

3) The Refrigerant circuit operates as follows:

A) The compressor compresses gaseous refrigerant to a high temperature.

B) The hot refrigerant condenses in the condenser. Being liquefied it is stored in the liquid receiver (if installed).
C) The liquid is taken out the storage vessel and injected in the evaporator (heat exchanger) by an expansion valve.
This expansion valve is protected by a filter, which removes particles and humidity that could be in the circuit.
D) The injected liquid fills in the refrigerant section of the air / refrigerant heat exchanger and evaporates by taking
out the calories from the compressed air. The gaseous refrigerant is sucked in the compressor and the cycle carries
on.
E) In order to keep the evaporation pressure steady, and thus the refrigerant temperature in the heat
exchanger, a by-pass valve is injecting hot gaseous refrigerant in the circuit. On certain dryers, an
automatic expansion valve regulates this.

4) Compressed air circuit:

A) The saturated hot compressed air flows into the Economiserwhere it is pre-cooled by the out flowing dry chilled
air. In the cold zone of the air refrigerant section it continues to cool down to dew point and enters the separator
where condensates are collected. The outgoing chilled air is then warmed up in the economizer by the hot
incoming air.

Page 8
B) The condensates are collected after centrifugal separation and drained out through the automatic trap.
C) As long as the compressed air temperature does not drop below dew point, there will be no
condensation in the air circuit.

Compressed Air Dryer Working Principle

Refrigerant Gas High Pressure Line
Refrigerant Gas Low Pressure Line

A Compressed Dry Air Outlet

F Compressed Wet Air Inlet

B E
Refrigerant Compressor - A
Condenser -B
Filter dryer - C
Expansion Valve - D
Heat Exchanger - E
Hot Gas Bypass Valve - F

C D Drain - G

G
5) Refrigerant compressor
Increases the pressure and temperature of refrigerant. There are two type of compressors commonly used
according to refrigerant capacity on this application:
- Piston type
- Scroll type

6) Condenser
Dissipates the heat provided by evaporator and compressor.
There are two type of condensers used on the application:
- Air Cooled Type (standard)
These condensers are designed to dissipate the heat to the ambient air.
The fans are used to force the air flow through the fins to enhance the heat transfer.
- Water Cooled Type (optional)
These condensers are designed to dissipate the heat to a water flow.
A shell and tube heat exchanger is used for this purpose.

7) Refrigerant circuit protection

A) Klixon: The single phase compressors are equipped with a klixon which is a thermal sensitive switch
controlling the temperature of the compressor and possible overintensity.
In case of malfunction, the klixon trips but switches on again automatically as soon as the compressor has
cooled down.
B) High Pressure Security Switch: Refrigerant line is considered as a pressure vessel. That is why it is
protected against bursts by the help of manually reset switch. It is set to 362 psi for dryers working with R134a
C) Filter dryer: A refrigerant circuit is a closed circuit and total water removal in the refrigerant circuit is
paramount in order to obtain a correct functioning.
D) To avoid problems, the refrigerant circuit must be vacuumed before loading the refrigerant.
It is equipped with a filter dryer, which also traps any solid particles, which may have migrated into the circuit during
assembly.
E) Water-cooled dryers have a safety high-pressure switch.
In case of cooling water failure, the safety switch stops the dryer. When the safety switch has tripped out,
it has to be manually resettled before switching on the dryer.

Page 9
 8) Refrigerant circuit controls
A) Liquid refrigerant injection: The liquid refrigerant is into the evaporator by a control valve. This valve is a
thermostatic or pressostatic one maintaining a constant overheats of the refrigerant in the evaporator(s).

B) Constant evaporating pressure: In the dryers equipped with a by-pass valve, the evaporating pressure is
kept constant by a controlled injection of hot gas from the high-pressure side into the low-pressure
section of the circuit.

9) Condensate drain - trap assembly

Dismantling the drain is easy because it can be isolated from the air circuit under pressure with a ball valve.
The drain has to be depressurized before being dismantled.

10) Heat Exchanger Modular design

A)The dryers are equipped with a compact

Mono Bloc Heat Exchanger module.

This assembly has been specially designed to

dry compressed air and is made of:

1) An Economiser which pre-cools the

entering hot air with the out flowing cold air.

2) An air/refrigerant exchanger cooling down

the compressed air.

3) A centrifugal separator concentrating all

condensates and requiring no maintenance.

11) Accessories
Temperature switch: Temperature switch: Located inside the dryer, this temperature switch is adjustable
from 32°F up to 95 °F.

Digital Controller –DigiPro: This device helps dryer save energy when there is not any compressed air flow
in the dryer. Those information can be reached; Dewpoint value, periodic maintenance interval display,
status report, run time meter, temperature unit selection (°F or °C)

Digital Controller – ESD3: Energy Saving Device: (ESD) This device helps dryer save energy when there is
not any compressed air flow in the dryer. Those information can be reached; Dewpoint value, periodic
maintenance interval display, status report, run time meter, temperature unit selection (°F or °C)
(Please see the models have standard and optional in next page)

Page 10
3. OPERATION

Control panels for MK-US Series

The control panel of the dryer includes the following elements:

Monophase Digital Controller

MK-US 10 - MK-US 200 Digi-Pro

Triphase Digital Controller Accessories

MK-US 250 - MK-US 425 Digi-Pro Main Switch

Triphase Digital Controller Accessories

MK-US 550 - MK-US 5000 ESD3 Emergency Stop

IMPORTANT NOTE

The Dryer has two Compressed Air Filter inside.

It is better to change filter element for the best efficiency when the alarm status is active.
It is recommended to keep replacement filter elements in your stock in order to replace them when needed.

ATTENTION

MK-US range dryers have low pressure drop according its competitors.
Do not use MK-US range dryers together with other dryers which have higher pressure drop
without getting the confirmation from our technical team.

Page 11
 3.1. During Operation
Regularly check the digital temperature controller ESD3 or Digi-Pro on dryer.

3.2 Start up and shut-down

Warning: Avoid leaving the dryer off when compressed air is still flowing through it.

3.3 Starting for the first time or after a long stop

1) Set the rotary switch to “I” This preheats the dryer and turns the drain system on.
It is recommended to leave the dryer power on permanently so the crankcase heater runs continuously.

IMPORTANT NOTE!
2) After a long stop of the dryer it is MANDATORY to allow a preheating period of minimum 4 hours
before starting again, to avoid any compressed air flow during preheating.

3) Follow the daily starting and shut down preocedure.

3.4 Daily starting and shut-down

1) Push on the ON button to start the dryer.
2) The start light or Dryer Active will indicate that the dryer is running.
3) To stop the dryer, first stop the airflow (either shut-down the air compressor or close the inlet/outlet or
by-pass valve) When the air flow is stopped, set the rotary switch on “ 0 “ Set it again on “ I “ in order to
keep the preheating on.

IMPORTANT NOTE !
4) Avoid leaving the dryer stopped when compressed air is still flowing through it.
5) To switch the already preheated dryer on again, simply push the green start button.

Page 12
4) ELECTRICAL CONTROLLER

4.1 DIGI-PRO
4.1.1 Description

With the Digi-Pro series controllers, air dryers have outstanding technology for both functionality and
dynamism, as well as appearance. The multi-functional display provides an accurate digital dew point
display as well as coded alarm monitoring of the refrigerant dryer.

DIGITAL CONTROLLER ADVANTAGES;

• Digital dew point monitoring

• Energy-saving mode display
• Periodic maintenance interval display
• Status report
• Run time meter
• Fahrenheit and Centigrade selection

4.1.2 Operation
Using the Digi Pro controller as shown in the picture below:

4.1.3 Menu Buttons

To modify the parameter, press and release button set. The menu
PROGRAM is used by service team. To disable the Key Lock: Press and hold
the SET for 4 sec.
POWER This button is used for starting and stopping the dryer. Press and
hold for 4 seconds to start or stop.

MENU These buttons are used to navigate between screens and adjust
values.

MANUAL DRAIN This button is used for manual control of the drain output. Press
and hold for 4 seconds to drain manually.

Page 13
 4.1.4 ALARM DISPLAY

Alarms / warnings are displayed on the digital screen. That means the dryer is not working
under normal operating conditions, which are outside the range of set values.

Alarm Code Alarm Description Reason for Alarm

tAL Low Temperature Alarm Refrigerant line temperature is lower than specified set values
tAH High Temperature Alarm Refrigerant line temperature is higher than specified set values
FIL Filter Change Alarm Filter element needs to be replaced
SEr General Service Alarm General service time of the dryer
HPr High Pressure Alarm Refrigerant high line pressure is higher than specified set values
Pr1 Temperature Probe Alarm Temperature sensor is faulty.

hFI Working Hours Alarm The dryer working hours allowed has been reached.

Please contact to the service when an alarm/warning occurs.

4.1.5 MODE DISPLAY

DRYER ACTIVE MODE This mark indicates that the dryer is performed in active state
and drying.

AUTOMATIC DRAIN MODE Shows if the drain system is activated.

ENERGY SAVING MODE Shows if the energy saving mode is activated

CELSIUS UNIT MODE Indicates that Celsius temperature unit is selected.

FAHRENHEIT UNIT MODE Indicates that Fahrenheit temperature unit is selected.

COMPRESSOR STANDBY MODE This mode shows that the dryer is ready for drying operation.

SERVICE MODE This mode shows that the dryer in the service time.

Page 14
4.2 ESD 3

4.2.1 DESCRIPTION

E-687 is designed as a controller for refrigerant type compressed air dryers. The controller has 8
temperature sensor inputs.
The controller has an RS-485 communication interface that can be used for remotely monitoring
channel temperatures, set points, input and output states. Modbus RTU protocol is used for
communication.
The front panel of the controller contains a four line 20 character LCD display and buttons that are used
in configuration and manual control operations.
The dimensions of the controller are 3.7 x 7.5 in. (front panel) with a depth of 4.3 in. . The panel cutout
should be 3.5 x 7.2 in. . The operating voltage of the controller is 20 - 60V AC or 20 - 85V DC.

4.2.2 OPERATION
The front panel view of E-687 controller is given in the below figure. The front panel of the controller
contains a four line 20 character LCD display, 10 buttons and 2 indicator leds.

The Front Panel View of E-687 Controller

button is used to enable or disable the ECO (economy) mode. Pressing this button complements the
state of ECO, i.e. if it is enabled; disables, if it is disabled; enables the ECO mode. The green led on the left
side of the button lights if the ECO mode is enabled.

button is used for manual control of the drain output.

button is used for alarm acknowledge. The dryer is automatically stopped if an anomaly is detected.
In that case, the alarm output and the alarm indicator led (red) on the front panel become activated. In
order to restart the dryer, alarm should be acknowledged and “restart delay” period should be timed out.
Pressing button acknowledges the alarm and reenergizes the alarm output and alarm led.

The buttons below the LCD display ( , , and ) are used in screen selection and
configuration operations.

button is used to change the temperature unit from ºC to ºF or vice versa.

and buttons are used for starting and stopping the dryer respectively. If the dryer is stopped
manually, it can not be started before “restart delay” period is timed out.

, , , , and buttons are disabled during configuration operations.

Page 15
 4.2.3 OPERATION SCREENS

4.2.3.1 The Normal Operation Screen

When the controller is powered on, it displays the type and version message, and then the restart delay
timer is set to 5 seconds. After 5 seconds, the normal operation screen is displayed as shown in below
figure

36°F

The exchanger temperature (Dew Point) and operation state of the dryer is displayed in this screen. If
there is a situation which will prevent the operation of the dryer then the “READY” message in the last line
will become “DISABLED”. See below figure

36°F

In order to start the dryer, the following conditions must be satisfied.

1. All the temperatures except the exchanger temperature and condenser outlet temperature must
be between their low and high limits. The low pressure line temperature can be ‘HIGH’.

2. Digital Input 3 (Compressor Fault) is not activated.

3. Digital Input 4 (Compressor Overload) is not activated.

4. Digital Input 5 (Fan Fault) is not activated.

5. Digital Input 6 (Fan Overload) is not activated.

6. Digital Input 7 (Phase Sequence Error) is not activated.

7. Digital Input 8 (Remote Disable) is not activated.

8. Digital Input 11 (High Pressure) is not activated.

9. Digital Input 12 (Low Pressure) is not activated.

Page 16
If all the above conditions are satisfied, the message in the last line of the normal operation screen will be
“READY” and the dryer can be started either pressing button on the front panel or activating Digital Input
1 (Remote Start) or activating Digital Input 13 (Remote Control). When the dryer is started, the normal
operation screen is displayed as shown in below figure.

36°F

In the beginning, Digital Output 1 (Compressor Motor), Digital Output 2 (Drain Output) and Digital Output
3 (Dryer is Running) become active. While in normal operation, the drain output is controlled according
to the configured “drain on” and “drain off” periods. “DRAIN ON” message is displayed in the end of the
last line while the drain output is active.

When the Digital Input 9 (Fan Motor is on) is activated, “FAN MOTOR IS ON” message is displayed in the
second line as shown in below figure.

36°F

Digital Input 14 (Water Pump is on) activates “WATER PUMP IS ON” message as shown in below figure.

36°F

When ECO mode is enabled and the exchanger temperature is less than or equal to “ECO Start Set point”
and this condition is prevailed more than “ECO Start Delay”, then, the compressor motor is stopped and
ECO operation starts. During the ECO operation the appearance of the display is given in below figure.
The value at the end of the second row indicates the time in seconds since beginning of the ECO opera-
tion.

36°F

Page 17
 Pressing and keys simultaneously at this page toggles the controller between automatic and
manual mode. In manual mode, the dryer starts and stops manually by using and buttons.
Unlike the manual mode, automatic mode enables the controller start and stop automatically at
pre-programmed times on a daily basis

When running in automatic mode, current scheduling information messages are also activated in the
second line of the displays as show in below figure. “NOT SCHEDULED” message is displayed when no
schedule exists. “START IN XXX” shows the time to the next scheduled program in minutes and “STOP IN
XXX” message shows the time to the end of current running program in minutes.

36°F 36°F 36°F

If the dryer is stopped manually by using button, or activating Digital Input 2 (Remote Stop) or
deactivating Digital Input 13 (Remote Control), the normal operating screen is displayed as shown in
below figure. The number at the end of the last line indicates the remaining time in seconds from the
restart delay. If this number becomes zero and there is no anomaly, the dryer can be restarted.

36°F

The first line in the normal operation screen (NO NAME) is user configurable.
If the exchanger temperature sensor is broken, dew point temperature will be displayed as 1000ºC.

4.3.3. The Info Screens

Various data related to the dryer can be monitored by sequentially pressing button.
Pressing button, changes the display screen. While one screen is displayed, pressing button
reverts to the normal operation screen. The flow chart for monitoring the dryer data is given in Figure
2.13. In this figure, screen numbers are shown on the upper left of the screens.

Screen1 is the normal operation screen. While this screen is displayed, pressing button selects
Screen2. By successively pressing button, all the screens can be accessed. Screens may also be
selected by and buttons.

Page 18
In Screen2, Screen3 and Screen4, the sensor temperatures are displayed. If the measured temperatures
“LOW” or
are between their low and high limits, only the temperature value is displayed, otherwise
“HIGH” message is added in the end of the line. In case of sensor break, only “SENSOR
BREAK” message is displayed.

In screen 5 and 6 the states of the compressor motor, fan motor, the phase sequence, remote disable
and air pressure are displayed. Actually this data is derived from the digital inputs.

The message in the first line of Screen5 is determined by Digital Input 3 and Digital Input 4 (Compressor
Fault and Compressor Overload). in the below table shows the relation between digital inputs and the
message.

36°F

68 °F

36°F

41°F

125°F

68°F

90°F

Page 19
 Screen8 displays the last four events that caused the dryer to be stopped automatically. The possible
alternatives for the messages are given below.

INLET AIR TEMP.LO COMPRESSOR FAULT

INLET AIR TEMP.HI COMP.OVERLOAD
EXCH.TEMP.LO FAN MOTOR FAULT
EXCH.TEMP.HI FAN MOT.OVERLOAD
LO.PRES.L.TEMP.LO PHASE SEQ.ERROR
LO.PRES.L.TEMP.HI REMOTE DISABLE
HI.PRES.L.TEMP.LO PRESSURE HIGH
HI.PRES.L.TEMP.HI PRESSURE LOW
AMB.TEMP.LO CONDENSER FAULT
AMB.TEMP.HI

Screen9 displays the date and time.

Screen10 displays the states of the digital inputs and digital outputs. The letters ‘L’ and ‘H’ stands for ‘not
activated’ and ‘activated’ states respectively.

The data in the first line of Screen10 (D.INPUT1), from right to left corresponds to Digital Input 1 to 8.

The data in the second line of Screen10 (D.INPUT2), from right to left corresponds to Digital Input 9 to 16.

The data in the third line of Screen10 (D.OUTPUT), from right to left corresponds to Digital Output 1 to 8.

Secreen11 displays automatic mode scheduling of the day. Please see Section 2.3.3 for scheduling for
auto/manual selection.

4.3.4 Operation Principles

In order to start the dryer, the following conditions must be satisfied.

1. All the temperatures except the exchanger temperature and condenser outlet temperature must
be between their low and high limits. The low pressure line temperature can be ‘HIGH’.
2. Digital Input 3 (Compressor Fault) is not activated.
3. Digital Input 4 (Compressor Overload) is not activated.
4. Digital Input 5 (Fan Fault) is not activated.
5. Digital Input 6 (Fan Overload) is not activated.
6. Digital Input 7 (Phase Sequence Error) is not activated.
7. Digital Input 8 (Remote Disable) is not activated.
8. Digital Input 11 (High Pressure) is not activated.
9. Digital Input 12 (Low Pressure) is not activated.

If all the above conditions are satisfied, the dryer can be started.

Page 20
5. TECHNICAL SPECIFICATIONS

Model Capacity Connection Amount of Refrigerant Pressure

(scfm) Size Refrigerant gas drop
(pounds) (psig)
MK-US 10 10 1/2" NPT 0.6 R134a 1,5
MK-US 15 15 1/2" NPT 0.6 R134a 1,7
MK-US 25 25 1/2" NPT 0.7 R134a 2,8
MK-US 30 30 1/2" NPT 0.7 R134a 2,8
MK-US 35 35 3/4" NPT 1.1 R134a 1,2
MK-US 60 60 3/4" NPT 1.2 R134a 1,6
MK-US 75 75 3/4" NPT 1.3 R134a 2,3
MK-US 100 100 1 1/2" NPT 2.2 R134a 1,6
MK-US 125 125 1 1/2" NPT 2.2 R134a 2,2
MK-US 140 140 1 1/2" NPT 2.2 R134a 2,8
MK-US 175 175 2" NPT 5.5 R134a 1,6
MK-US 200 200 2" NPT 5.5 R134a 1,9
MK-US 250 250 2" NPT 9.9 R134a 1,8
MK-US 350 350 2" NPT 9.9 R134a 2,6
MK-US 425 425 2" NPT 9.9 R134a 2,9
MK-US 550 550 3" NPT 15.4 R134a 2,0
MK-US 700 700 3" NPT 15.4 R134a 2,5
MK-US 900 900 3" NPT 22 R134a 1,7
MK-US 1100 1100 3" NPT 22 R134a 2,2
MK-US 1350 1350 DN100 23.1 R134a 1,7
MK-US 1500 1500 DN100 23.1 R134a 1,9
MK-US 2000 2000 DN100 44 R134a 2,7
MK-US 2350 2350 DN100 44 R134a 2,8
MK-US 2750 2750 DN150 44 R134a 2,5
MK-US 3000 3000 DN150 50.7 R134a 2,5
MK-US 3600 3600 DN150 52.9 R134a 2,5
MK-US 4000 4000 DN200 57.3 R134a 2,5
MK-US 5000 5000 DN200 59.5 R134a 2,5

FOR ALL MODELS

Nominal Working Pressure 100 psig
Maximum Working Pressure 230 psig
Maximum Ambient Temperature 120°F
Minimum Ambient Temperature 39°F
Maximum Inlet Temperature 140°F

Page 21
Page 22
REFRIGERANT GAS FLOW LINE

COMPRESSED AIR FLOW LINE

DRAIN FLOW LINE

PILOT FLOW LINE

1
13
6.DIAGRAMS

AIR OUTLET MK-US 10 - MK-US 700

2
6.1 AIR FLOW DIAGRAMS

10 13
AIR INLET

M
11 12

M
4 14 16
S

3
15
S
S

Drain
16 Outlet
5 7 8

IMPORTANT NOTICE:

- High Pressure Switch (Part No:5) is not used from MK US 10 to MK US 30 .

- Hot Gas By Pass Valve (Part No:9) is not used from MK US 10 to MK US 75.
- Liquid Receiver (Part No:6) is not used from MK US 10 to MK US 140 .
- Liquid Separator (Part No:10) is used from MK US 350 to MK US 700 .
- Low Pressure Switch (Part No:11) is only MK US 550 and MK US 700 .
6.1 AIR FLOW DIAGRAMS
MK-US 10 - MK-US 700

16 CHECK VALVE
15 SOLENOID VALVE
14 MANUEL VALVE

13 FILTER
12 HEAT EXCHANGER
11 LOW PRESSURE SWITCH
10 LIQUID SEPARATOR

9 BY-PASS VALVE
8 EXPANSION VALVE
7 FILTER DRIER
6 LIQUID RECEIVER

5 HIGH PRESSURE SWITCH

4 FAN SWITCH

3 CONDENSER
2 FAN MOTOR

1 COMPRESSOR

POS. DESCRIPTION QTY

Page 23
Page 24
REFRIGERANT GAS FLOW LINE

COMPRESSED AIR FLOW LINE

DRAIN FLOW LINE

1
PILOT FLOW LINE

10

AIR OUTLET

16
11 13
2
AIR INLET

M
9
6.1 AIR FLOW DIAGRAMS
MK-US 900 - MK-US 5000

12

M
4
3

18

14
18
5 7 8 15

6
17 18
Drain
Outlet S
IMPORTANT NOTICE:

- Air Compressed Filters are only used MK US 900 and MK US 1100 .

6.1 AIR FLOW DIAGRAMS
MK-US 900 - MK-US 5000

18 MANUEL VALVE

17 SELONOID VALVE
16 OIL SEPARATOR

15 DRAIN COLLECTOR
14 MEMBRANE VALVE

13 AIR COLLECTOR

12 HEAT EXCHANGER
11 LOW PRESSURE SWITCH
10 LIQUID SEPARATOR

9 BY-PASS VALVE
8 EXPANSION VALVE
7 FILTER DRIER
6 LIQUID RECEIVER

5 HIGH PRESSURE SWITCH

4 FAN SWITCH

3 CONDENSER
2 FAN MOTOR

1 COMPRESSOR

POS. DESCRIPTION QTY

Page 25
 6.2

MK-US
ELECTRICAL DIAGRAMS
With Control & Power

“User must supply the protective earth conductor of the dryer. The conductor is to be connected to
the point on the conducting body of the dryer, specified by a sticker with the protective earth symbol
next to it. The size of the protective earth conductor should be minimum the size of the power
conductor, minimum 16 mm² for power conductor size between 16 and 35 mm², minimum half the
size of the conductor if it is larger than 35 mm².”

Page 26
 Voltage/Phase/ INSTALLED POWER TOTAL LRA Fuse
MODEL Nominal Current (Amp) MCA (A)
Hertz (kWatt) (A) (Amp)

MK-US 10 115/1P/60 0,38 3,07 4,20 18,45 6

MK-US 10 230/1P/60 0,39 1,62 2,41 10,28 6
MK-US 15 115/1P/60 0,39 3,16 4,20 18,45 6
MK-US 15 230/1P/60 0,16 1,68 2,41 10,28 4
MK-US 25 115/1P/60 0,44 3,74 5,08 22,45 6
MK-US 25 230/1P/60 0,44 1,94 2,66 11,28 4
MK-US 30 115/1P/60 0,46 3,89 5,08 22,45 6
MK-US 30 230/1P/60 0,16 2,01 2,66 11,28 4
MK-US 35 115/1P/60 0,45 3,92 5,20 25,45 6
MK-US 35 230/1P/60 0,43 1,96 2,66 11,28 4
MK-US 60 115/1P/60 0,68 6,46 8,55 33,05 10
MK-US 60 230/1P/60 0,64 3,17 4,30 20,45 6
MK-US 75 115/1P/60 0,77 7,52 10,43 42,65 10
MK-US 75 230/1P/60 0,79 4,25 4,18 21,55 6
MK-US 100 115/1P/60 0,94 9,89 12,80 48,05 15
MK-US 100 230/1P/60 0,95 4,63 6,43 20,95 8
MK-US 125 115/1P/60 1,17 12,85 17,18 64,05 20
MK-US 125 230/1P/60 1,19 6,3 8,93 33,55 10
MK-US 140 230/1P/60 1,42 6,27 9,05 32,78 10
MK-US 175 230/1P/60 1,51 6,66 9,05 32,78 10
MK-US 175 460/3P/60 1,39 2,39 3,57 17,74 4

MK-US 175 230/3P/60 2,05 6,43 8,05 30,30 10

MK-US 200 230/1P/60 1,96 8,6 13,63 56,8 15
MK-US 200 460/3P/60 2,03 4,2 6,06 24,1 6
MK-US 200 230/3P/60 2,63 9,2 11,18 47,3 15
MK-US 250 230/1P/60 0,23 5,9 11,63 47,75 15
MK-US 250 460/3P/60 0,84 3,8 6,06 23,74 6
MK-US 250 230/3P/60 0,84 8,6 11,18 46,65 15
MK-US 350 230/1P/60 2,27 6,01 9,10 51,21 10
MK-US 350 460/3P/60 1,01 5,82 6,88 27,50 8
MK-US 350 230/3P/60 2,74 8,8 11,75 49,00 15
MK-US 425 230/1P/60 2,71 13,75 17,98 79,35 20
MK-US 425 460/3P/60 3,40 6,38 7,63 27,50 8
MK-US 425 230/3P/60 3,16 10,55 13,75 49,00 15
MK-US 550 460/3P/60 3,58 7,3 11,88 53,00 15
MK-US 700 460/3P/60 3,94 8,8 14,25 66,00 15
MK-US 900 460/3P/60 5,28 10,4 16,03 102,40 20
MK-US 1100 460/3P/60 5,90 12,45 16,78 97,40 20
MK-US 1350 460/3P/60 7,10 13,45 20,93 117,30 25
MK-US 1500 460/3P/60 8,01 14,25 25,68 128,30 25
MK-US 2000 460/3P/60 10,82 18,6 32,70 154,70 35
MK-US 2350 460/3P/60 12,32 23,4 35,95 183,70 35
MK-US 2750 460/3P/60 15,37 24,3 42,33 229,70 45
MK-US 3000 460/3P/60 16,72 26,25 44,18 231,55 45
MK-US 3600 460/3P/60 19,99 34,35 57,45 306,55 60
MK-US 4000 460/3P/60 20,09 34,55 57,45 306,55 60
MK-US 5000 460/3P/60 26,24 49,5 68,85 370,10 70

Page 27
Page 28
SP EV3
~ EV3: Controller
SP: Power supply
AL: Alarm contacts
A20: Drain supply
DR: Drain valve relay
DR K01 K30 A40-1: Start capacitor
K01: Compressor start relay
K02: Compressor motor contactor
K30: Alarm relay
1 2 3 4 5 6 7 9 10 11 12 S10: Fan pressure switch
S16: Filter service contact (optional)
M01: Compressor motor
MK-US 10 to MK-US 30

M10: Fan motor

2 3 4 P: Compressor motor overload protector
12
PT: Temperature sensor (NTC)
4 4 HP indicates high pressure.
6.2 ELECTRICAL DIAGRAMS

PT
1 4 5 6 7 S16

AL
3 4
19 4
P S10
L N 1 4
10
A20 K01 HP
A40-1
A/S MAXIMUM SET: %15
C/C P/R

M FIELD INSTALLED
l ~ M
l ~
M10
ELECTRICAL M01
SPECIFICATIONS S01 MAIN PROTECTION AND DISCONNECTING
COMPRESSOR FAN MOTOR MEANS SHALL BE PROVIDED BY THE INSTALLER OF
UN 115V/1~/60Hz UN 115V/1~/60Hz RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER

MK-US-10 RLA 3A 0,221kW MK-US-10 RLA 0,35A 0,055kW SUPPLY LINE VOLTAGE RATING - 600 VAC
MK-US-15 RLA 3A 0,234kW MK-US-15 RLA 0,35A 0,055kW
MK-US-25 RLA 3,7A 0,285kW MK-US-25 RLA 0,35A 0,055kW ELECTRICAL SUPPLY LINE
SINGLE PHASE + PROTECTION EARTH
MK-US-30 RLA 3,7A 0,304kW MK-US-30 RLA 0,35A 0,055kW

COMPRESSOR FAN MOTOR CABLES SIZE

UN 230V/1~/60Hz UN 230V/1~/60Hz MK-US-10 3AWG14
MK-US-10 RLA 1,7A 0,231kW MK-US-10 RLA 0,18A 0,055kW MK-US-20 3AWG14
MK-US-15 RLA 1,7A 0,248kW MK-US-15 RLA 0,18A 0,055kW MK-US-30 3AWG14
MK-US-25 RLA 1,9A 0,288kW MK-US-25 RLA 0,18A 0,055kW MK-US-35 3AWG14
MK-US-30 RLA 1,9A 0,305kW MK-US-30 RLA 0,18A 0,055kW
 EV3
~ SP

EV3: Controller
SP: Power supply
DR K01 K30 AL: Alarm contacts
A20: Drain supply
DR: Drain valve relay
A40-1:Start capacitor
1 2 3 4 5 6 7 9 10 11 12 K01: Compressor start relay
K02: Compressor motor contactor
K30: Alarm relay
2 S10: Fan pressure switch
3 4 S11: High pressure switch
MK-US 35 to MK-US 125

4 4 11 12 S16: Filter service contact (optional)

M01: Compressor motor
S11 M10: Fan motor
6.2 ELECTRICAL DIAGRAMS

1 4 10 P: Compressor motor overload protector

S16 HP PT PT: Temperature sensor (NTC)
3 4 HP indicates high pressure
5 6 7
10
19 4 AL
P S10
L N 1 4 10
A20 K01 HP
A40-1
A/S
C/C P/R
MAXIMUM SET: %15
M
l~ M
FIELD INSTALLED
l ~
M10
M01
ELECTRICAL
SPECIFICATIONS

COMPRESSOR FAN MOTOR S01 MAIN PROTECTION AND DISCONNECTING MEANS

UN 115V/1~/60Hz UN 115V/1~/60Hz SHALL BE PROVIDED BY THE INSTALLER OF
MK-US-35 RLA 3,8A 0,290kW MK-US-35 RLA 0,35A 0,055kW RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER
MK-US-60 RLA 6A 0,466kW MK-US-60 RLA 0,95A 0,110kW SUPPLY LINE VOLTAGE RATING - 600 VAC
MK-US-75 RLA 7,5A 0,562kW MK-US-75 RLA 0,95A 0,110kW
MK-US-100 RLA 9,4A 0,725kW MK-US-100 RLA 0,95A 0,110kW ELECTRICAL SUPPLY LINE
MK-US-125 RLA 12,9A 0,964kW MK-US-125 RLA 0,95A 0,110kW SINGLE PHASE + PROTECTION EARTH

CABLES SIZE
COMPRESSOR FAN MOTOR
UN 230V/1~/60Hz UN 230V/1~/60Hz MK-US-35 3AWG14
MK-US-60 3AWG14
MK-US-35 RLA 1,9A 0,279kW MK-US-35 RLA 0,18A 0,055kW
MK-US-75 3AWG14
MK-US-60 RLA 3A 0,434kW MK-US-60 RLA 0,45A 0,110kW
MK-US-100 3AWG14
MK-US-75 RLA 2,9A 0,580kW MK-US-75 RLA 0,45A 0,110kW
MK-US-125 3AWG12
MK-US-100 RLA 4,7A 0,739kW MK-US-100 RLA 0,45A 0,110kW
MK-US-125 RLA 6,7A 0,984kW MK-US-125 RLA 0,45A 0,110kW

Page 29
Page 30
EV3
EV3: Controller
MK-US 140
SP: Power supply
~ SP
AL: Alarm contact
A20: Drain supply
DR: Drain valve relay
A31: Bleeder resistor
DR K01 K30 A40-1:Start capacitor
A40-2: Run capacitor
K01: Compressor start relay
1 3 6 7 9 10 11 12 K02: Compressor motor contactor
2 4 5 K30: Alarm relay
S10: Fan pressure switch
S11: High pressure switch
2 S16: Filter service contact (optional)
3 4
M01: Compressor motor
4 11 12 M10: Fan motor
4
6.2 ELECTRICAL DIAGRAMS

P: Compressor motor overload protector

S11 PT: Temperature sensor (NTC)
10 HP indicates high pressure
1 4
S16 HP PT TP indicates thermal protection

5 6 7
3 4 10
16 4
A31 S10
L N 1 4 AL
10
A20 A40-1 HP
P K01

A40-2
A/S
MAXIMUM SET: %15
C/C P/R

M M FIELD INSTALLED
l~ l~
M10 (TP)
M01 (TP)

S01 MAIN PROTECTION AND DISCONNECTING MEANS

ELECTRICAL SHALL BE PROVIDED BY THE INSTALLER OF RESIDUAL
SPECIFICATIONS CURRENT AUTOMATIC CIRCUIT BREAKER
COMPRESSOR FAN MOTOR
SUPPLY LINE VOLTAGE RATING - 600 VAC
UN 230V/1~/60Hz UN 230V/1~/60Hz
MK-US-140 RLA 6,4A 1,213kW MK-US-140 RLA 0,68A 0,095kW ELECTRICAL SUPPLY LINE
SINGLE PHASE + PROTECTION EARTH

CABLES SIZE
MK-US-140 3AWG14
 EV3
EV3: Controller
S01: Main switch
SP: Power supply
~ SP
AL: Alarm contact
A20: Drain supply
A30 : Compressor heater
DR: Drain valve relay
DR K01 K30 A31: Bleeder resistor
A40-1:Start capacitor
A40-2: Run capacitor
K01: Compressor start relay
1 2 3 4 5 6 7 9 10 11 12 K02: Compressor motor contactor
S01 K30: Alarm relay
S10: Fan pressure switch
2 S11: High pressure switch
3 4
S16: Filter service contact (optional)
6.2 ELECTRICAL DIAGRAMS

4 4 11 12 M01: Compressor motor

M10: Fan motor
S11 P: Compressor motor overload protector
MK-US 175 to MK-US 425 (1P)

10 PT: Temperature sensor (NTC)

1 4
S16 PT HP indicates high pressure
HP
TP indicates thermal protection
5 6 7
3 4 10
L N
A31 S10
1 4 AL
10
A20 A40-1 HP
P K01

A 30 A40-2
MAXIMUM SET: %15
A/S
C/C P/R

M M FIELD INSTALLED
l~ l ~
M10 (TP)
M01 (TP)

ELECTRICAL S01 MAIN PROTECTION AND DISCONNECTING MEANS

SPECIFICATIONS SHALL BE PROVIDED BY THE INSTALLER OF RESIDUAL
CURRENT AUTOMATIC CIRCUIT BREAKER
COMPRESSOR FAN MOTOR
UN 230V/1~/60Hz SUPPLY LINE VOLTAGE RATING - 600 VAC
UN 230V/1~/60Hz
MK-US-175 RLA 6,4A 1,289kW MK-US-175 RLA 0,68A 0,095kW ELECTRICAL SUPPLY LINE
MK-US-200 RLA 8,7A 1,280kW SINGLE PHASE + PROTECTION EARTH
MK-US-200 RLA 0,68A 0,095kW
MK-US-250 RLA 8,7A 1,270kW MK-US-250 RLA 2,25A 0,340kW CABLES SIZE
MK-US-350 RLA 6,2A 1,729kW MK-US-350 RLA 2,25A 0,340kW MK-US-175 3AWG14
MK-US-425 RLA 13,3A 2,300kW MK-US-425 RLA 2,25A 0,340kW MK-US-200 3AWG14
MK-US-250 3AWG14
MK-US-350 3AWG14
MK-US-425 3AWG14

Page 31
Page 32
S01
X1
R R R
L1 S S S
L2
L3 T T T
PE

F1 F2 F3 F4
1A 1A 0.5A 0.5A

P1 P10
R13
R11 R7 S7
S13 R S T
S11 Q1
T13 Q1
T11
R6 S6
Q10 A1 : Control circuit transformer
R10 S10
6.2 ELECTRICAL DIAGRAMS

Q1 S01 : Main switch

A30 : Compressor heater
R1
S1 A01 X1 : Mains supply connection terminal block
R3
T1 S3 B15 : Control circuit supply
T3 A 30
PSR : Phase sequence relay
F1, F2 : A01 Primary protection
M M
F3, F4 : A30 overload protection
3 (T.P.) 3 19 4 Q1 : Compressor contactor
PSR B15 Q10 : Fan motor contactor
M1: Compressor motor
M10: Fan motor
M1 M10 P1 : Overload protector of compressor
P10 : Overload protector of fan motor
MK-US 175 to MK-US 425 (3P) POWER 230 VOLT

ELECTRICAL
SPECIFICATIONS MAIN PROTECTION AND DISCONNECTING MEANS
SHALL BE PROVIDED BY THE INSTALLER OF
COMPRESSOR RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER
FAN MOTOR
UN 230V/3~/60Hz UN 230V/3~/60Hz SUPPLY LINE VOLTAGE RATING - 600 VAC
MK-US-175 RLA 4,6A 1,210kW MK-US-175 RLA 0,65A 0,125kW ELECTRICAL SUPPLY LINE
MK-US-200 RLA 7,1A 1,790kW MK-US-200 RLA 0,65A 0,125kW 3 PHASE + PROTECTION EARTH
MK-US-250 RLA 7,1A 1,780kW MK-US-250 RLA 1,5A 0,210kW
MK-US-350 RLA 6,2A 1,729kW CABLES SIZE
MK-US-350 RLA 1,5A 0,210kW
4AWG14
MK-US-425 RLA 7,8A 2,150kW MK-US-425 RLA 1,5A 0,210kW 4AWG14
4AWG14
4AWG14
4AWG14
 S01
X1
R R R
L1 S S S
L2
L3 T T T
PE

F1 F2 F3 F4
1A 1A 0.5A 0.5A

P1 P10
R11 R13 R7 S7
S13 R S T
S11 Q1
T13 Q1
T11
R6 S6
Q10 A1 : Control circuit transformer
R10 S10
Q1 S01 : Main switch
A30 : Compressor heater
R1
S1 A01 X1 : Mains supply connection terminal block
R3
6.2 ELECTRICAL DIAGRAMS

T1 S3 B15 : Control circuit supply

T3 A 30
PSR : Phase sequence relay
F1, F2 : A01 Primary protection
M M
F3, F4 : A30 overload protection
3 (T.P.) 3 19 4 Q1 : Compressor contactor
PSR B15 Q10 : Fan motor contactor
M1: Compressor motor
M10: Fan motor
M1 M10 P1 : Overload protector of compressor
P10 : Overload protector of fan motor

ELECTRICAL
MK-US 175 to MK-US 425 (3P) POWER 460 VOLT

SPECIFICATIONS
COMPRESSOR FAN MOTOR
UN 460V/3~/60Hz UN 460V/3~/60Hz MAIN PROTECTION AND DISCONNECTING MEANS
SHALL BE PROVIDED BY THE INSTALLER OF
MK-US-175 RLA 2,5A 1,168kW MK-US-175 RLA 0,34A 0,125kW RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER
MK-US-200 RLA 3,5A 1,190kW MK-US-200 RLA 0,34A 0,125kW
MK-US-250 RLA 3,5A 1,190kW MK-US-250 RLA 0,75A 0,210kW SUPPLY LINE VOLTAGE RATING - 600 VAC
MK-US-350 RLA 3,5A 1,799kW MK-US-350 RLA 0,75A 0,210kW
MK-US-425 RLA 4,1A 2,389kW MK-US-425 RLA 0,75A 0,210kW ELECTRICAL SUPPLY LINE
3 PHASE + PROTECTION EARTH

CABLES SIZE
4AWG14
4AWG14
4AWG14
4AWG14
4AWG14

Page 33
Page 34
EV3

~ SP EV3: Controller
SP: Power supply
AL: Alarm contacts
K01 DR K30 A20: Drain supply
DR: Drain valve relay
PSR: Phase sequence relay
F10: Control circuit fuse
1 2 3 4 5 7 8 9 10 11 12 Q1: Compressor contactor
Q10: Fan motor contactor
K01: Compressor relay
K30: Alarm relay
6.2 ELECTRICAL DIAGRAMS

2 2 2 S10: Fan pressure switch

12 S12: High pressure switch
8 8 11 S13: Low pressure switch
P10 S20: High temperature switch
22
S12 S16: Filter service contact (optional)
21 S31: Fan thermal protector (optional)
3 8
22 S16 HP PT P1: Compressor overload protector
P1 1 S10 4 5 P10: Fan overload protector
22
PT: Temperature sensor ( NTC)
21 AL 13 HP indicates high pressure
21 Q1 HP 8 S13 LP indicates low pressure
PSR 10 TH indicates thermal
17 3 8
18 LP
MK-US 175 to MK-US 425 (3P) CONTROL

A20 10
Q10
F10 8
14
S20

19 8 TH
L N
~24VAC
15
S31
FIELD INSTALLED
TH

10
 F10, F11 : Control circuit protection
46 S2: Limit Switch
F10 S5 : Remote control start button
4A S7 : Remote control stop button

42
S3 : Emergency Button

42
S16: Filter service contact
S3 P1 : Overload protector of compressor
P10 : Overload protector of fan motor 1
P11 : Overload protector of fan motor 2

43 43
BN
S31: Fan heat thermal 1
BU
S2 NOTE1
1 1 1 1 1 S32: Fan heat thermal 2
EMR4 : Phase protection relay
S8 : Remote control contact
S31
TH S8 S9 : Obstruction for manual on/off
S15 : Service contact
S32 11 14 14

1
EMR4 S10 : Fan pressure switch

1
TH Q10 Q11
14
S5 13 13 S13 S12 : High Pressure safety switch
P1 P10 13 P11 13
13 LP
S9 S13 : Low Pressure safety switch
S7 14 14 14 S16
S15 Q1 : Compressor motor contactor
6.2 ELECTRICAL DIAGRAMS

S12 Q10 : Fan motor contactor 1

HP
Q11 : Fan motor contactor 2
24 V AC A20 : Electronic timer-drain supply (Optional)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 K20: Drain supply test relay
A21:Drain test
A11 A13 A11 : Remote control running lamp (green)
A13 : Remote control stand-by lamp (red)
A41 : Remote control alarm contact
A41
1 PT1 : Inlet air temperature sensor (PT100)

3
PT2 : Heat exchanger temperature sensor (PT100)
MK-US 550 to MK-US 1500 CONTROL

PT3 : Low pressure line sensor (PT100)

4
Q1 TRXA TRXB GND +A02 -A02
F N PT4 : High pressure line sensor (PT100)

0
0
36 12 13 PT5 : Ambient temperature sensor (PT100)
PT6 : Condenser outlet temperature sensor (PT100)
P S10 NOTE2 44 45 B16 : Computer/Communication connection (RS 485)
B16 B17 : Dew point analog output (4-20mA/0-100 C)
B17
35 HP indicates high pressure
Q10 Q11 - + - + - + - + - + - + LP indicates low pressure
Q1 C 01 02 03 04 05 06
0 4
TH indicates thermal
A20
0
0 0 0
Type1 PT1 PT2 PT3 PT4 PT5 PT6

4
0 1
A20
K20
K20
FIELD INSTALLED
42 43
Broken line cables are dependent on customer wish
42 A21 43
3.1 3.2

0 NOTE1: S16 DOES NOT EXIST IN DK 180 AND DK 190

More than one beko drains are connected parallel to each other
NOTE2: DRAIN SYSTEM CAN BE TYPE1 OR TYPE2
Type2

Page 35
Page 36
X1
R R R R
L1 S S S S
L2
L3 T T T T
PE

F1 F2 F3
A1 : Control circuit transformer
F4
1A 1A 0.5A 0.5A A30 : Compressor heater
R13 P10 R14 P11 X1 : Mains supply connection terminal block
P1
R11 S13 S14 R7 S7 B15 : Control circuit supply
T13 T14 R S T EMR4 : Phase protection relay
S11 Q1
Q1 F1, F2 : A01 Primary protection
T11
Q10 Q11
R6 S6 F3, F4 : A30 overload protection
R10 S10 Q1 : Compressor contactor
Q1 Q10 : Fan contactor 1
Q11 : Fan contactor 2
R1 M1: Compressor motor
S1 A01
R3 R4 M10 : Fan motor1
T1 S3 S4
T3 T4 A 30
6.2 ELECTRICAL DIAGRAMS

M11 : Fan motor2

MK-US 550 to 1500 POWER

P1 : Overload protector of compressor

P10 : Overload protector of fan motor 1
M M M P11 : Overload protector of fan motor 2
3 (T.P.) 3 (T.P.) 3 46 0
EMR 4 B15

M1 M10 M11 MAXIMUM SET: %15

FIELD INSTALLED

MAIN PROTECTION AND DISCONNECTING MEANS SHALL BE PROVIDED BY

ELECTRICAL SPECIFICATIONS THE INSTALLER OF RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER

COMPRESSOR FAN MOTOR SUPPLY LINE VOLTAGE RATING - 600 VAC

UN 460V/3/60 UN 460V/3/60
ELECTRICAL SUPPLY LINE
MK-US-550 RLA 7,1A 2,44kW MK-US-550 RLA 1A 0,275kW (x2) 3 PHASE + PROTECTION EARTH
MK-US-700 RLA 9A 2,80kW MK--US-700 RLA 1A 0,275kW (x2)
MK-US-900 RLA 10,9A 3,99kW MKUS-900 RLA 0,7A 0,350kW (x2) CABLES SIZE
MK-US-1100 RLA 11,5A 4,61kW MK-US-1100 RLA 0,7A 0,350kW (x2) MK-US-550 4AWG12
MK-US-1350 RLA 14,1A 5,19kW MK-US-1350 RLA 1,15A 0,660kW (x2) MK-US-700 4AWG12
MK-US-1500 RLA 17,9A 6,12kW MK-US-1500 RLA 1,15A 0,660kW (x2) MK-US-900 4AWG10
MK-US-1100 4AWG10
MK-US-1350 4AWG10
MK-US-1500 4AWG10
 F10, F11 : Control circuit protection
46 S2: Limit Switch
F10 S5 : Remote control start button
4A S7 : Remote control stop button

42
S3 : Emergency Button

42
S16: Filter service contact
S3 P1 : Overload protector of compressor
P10 : Overload protector of fan motor 1
P11 : Overload protector of fan motor 2

43 43
BN
S31: Fan heat thermal 1
BU
S2 NOTE1
1 1 1 1 1 S32: Fan heat thermal 2
EMR4 : Phase protection relay
S8 : Remote control contact
S31
TH S8 S9 : Obstruction for manual on/off
S15 : Service contact
S32 11 14 14

1
EMR4 S10 : Fan pressure switch

1
TH Q10 Q11
14
S5 13 13 S13 S12 : High Pressure safety switch
P1 P10 13 P11 13
13 LP
S9 S13 : Low Pressure safety switch
6.2 ELECTRICAL DIAGRAMS

S7 14 14 14 S16
S15 V1: Bypass valve
S12 Q1 : Compressor motor contactor
HP
Q10 : Fan motor contactor 1
24 V AC Q11 : Fan motor contactor 2
MK-US 2000 to 2750 CONTROL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 A20 : Electronic timer-drain supply (Optional)

A25: Compressor heat thermal supply
A11 A13 K20: Drain supply test relay
A21:Drain test
V1
A11 : Remote control running lamp (green)
1 A41
A13 : Remote control stand-by lamp (red)

3
A41 : Remote control alarm contact
Q1 PT1 : Inlet air temperature sensor (PT100)

4
F N TRXA TRXB GND +A02 -A02
PT2 : Heat exchanger temperature sensor (PT100)
36

0
0
12 13 PT3 : Low pressure line sensor (PT100)
PT4 : High pressure line sensor (PT100)
P S10 NOTE2 44 45 PT5 : Ambient temperature sensor (PT100)
A25 B16
B17 PT6 : Condenser outlet temperature sensor (PT100)
NOTE1 35 B16 : Computer/Communication connection (RS 485)
Q10 Q11 - + - + - + - + - + - + B17 : Dew point analog output (4-20mA/0-100 C)
Q1 C 01 02 03 04 05 06
0 4
HP indicates high pressure
A20 LP indicates low pressure
0
0 0 0 TH indicates thermal
Type1 PT1 PT2 PT3 PT4 PT5 PT6

4
0 1
A20
K20
K20
FIELD INSTALLED
42 43
Broken line cables are dependent on customer wish
42 A21 43
3.1 3.2

0 NOTE1: A25 AND P2 EXIST JUST IN MKUS-2750

More than one beko drains are connected parallel to each other NOTE2: DRAIN SYSTEM CAN BE TYPE1 OR TYPE2
Type2

Page 37
Page 38
X1
R R R R
L1 S S
L2 S S
L3 T T T T
PE

F2 F3
A1 : Control circuit transformer
F1 F4
1A 1A 0.5A 0.5A A30 : Compressor heater
R13 P10 R14 P11 X1 : Mains supply connection terminal block
P1
R11 S13 S14 R7 S7 B15 : Control circuit supply
T13 T14 R S T EMR4 : Phase protection relay
S11 Q1
Q1 F1, F2 : A01 Primary protection
T11
Q10 Q11
R6 S6 F3, F4 : A30 overload protection
R10 S10 Q1 : Compressor contactor
Q1 Q10 : Fan contactor 1
Q11 : Fan contactor 2
R1
6.2 ELECTRICAL DIAGRAMS

M1: Compressor motor

S1 A01
R3 R4 M10 : Fan motor1
T1 S3 S4
MK-US 2000 to 2750 POWER

T3 T4 A 30 M11 : Fan motor2

P1 : Overload protector of compressor
P10 : Overload protector of fan motor 1
M M M P11 : Overload protector of fan motor 2
3 (T.P.) 3 (T.P.) 3 46 0
EMR 4 B15

M1 M10 M11 MAXIMUM SET: %15

FIELD INSTALLED

MAIN PROTECTION AND DISCONNECTING MEANS SHALL BE PROVIDED BY

THE INSTALLER OF RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER

SUPPLY LINE VOLTAGE RATING - 600 VAC

ELECTRICAL SPECIFICATIONS
ELECTRICAL SUPPLY LINE
3 PHASE + PROTECTION EARTH
COMPRESSOR FAN MOTOR
UN 460V/3/60 UN 460V/3/60 CABLES SIZE
MK-US-2000 4AWG7
MK-US-2000 RLA 22,4A 7,750kW MK-US-2000 RLA 1,85A 1,25kW (x2) MK-US-2350 4AWG5
MK-US-2350 RLA 25,0A 9,250kW MK-US-2350 RLA 1,85A 1,25kW (x2) MK-US-2750 4AWG5
MK-US-2750 RLA 30,1A 12,300kW MK-US-2750 RLA 1,85A 1,25kW (x2)
 F10, F11 : Control circuit protection
S2: Limit Switch
S5 : Remote control start button
46
S7 : Remote control stop button
S3 : Emergency Button
F10 P1 : Overload protector of compressor
4A P2: Compressor thermal protection

42
P10 : Overload protector of fan motor1

42
P11 : Overload protector of fan motor2
S3 P12 : Overload protector of fan motor3
S31: Fan heat thermal 1

43 43
S32: Fan heat thermal 2
BN

S2
S33: Fan heat thermal 3
BU
1 1 1 1 1 EMR4 : Phase protection relay
S31
S8 : Remote control contact
TH S9 : Obstruction for manual on/off
P2 S32
S8 S15 : Service contact
TH
S10 : Fan pressure switch
MK-US 3000 CONTROL

S33 11
14 14 14

1
TH EMR4 Q10 Q11 S12 : High Pressure safety switch
14
Q12
S5 13 13 13
P1
S13 S13 : Low Pressure safety switch
13 LP
S9
6.2 ELECTRICAL DIAGRAMS

S7 14
Q1 : Compressor motor contactor
13 S15
P10 P11 13 P12 13 Q10 : Fan motor1 contactor
S12
14 14 14 HP
Q11 : Fan motor2 contactor
24 VAC Q12 : Fan motor3 contactor
V1: Bypass valve
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
K20: Drain supply test relay
A21:Drain test
A11 A13 A25: Compressor heat thermal supply
V1
A20 : Electronic timer-drain supply (Optional)
A41
A11 : Remote control running lamp (green)
F N 1

3
A13 : Remote control stand-by lamp (red)
A41 : Remote control alarm contact

4
Q1 PT1 : Inlet air temperature sensor (PT100)
TRXA TRXB GND +A02 -A02
PT2 : Heat exchanger temperature sensor (PT100)
A25

0
36

0
12 13 PT3 : Low pressure line sensor (PT100)
PT4 : High pressure line sensor (PT100)
P S10 NOTE1 44 45 PT5 : Ambient temperature sensor (PT100)
B16
B17 PT6 : Condenser outlet temperature sensor (PT100)

35
B16 : Computer/Communication connection (RS 485)
Q11
- + - + - + - + - + - + B17 : Dew point analog output (4-20mA/0-100 C)
Q1 C 01 02 03 04 05 06
Q10 Q12 0 4 HP indicates high pressure
A20
0 LP indicates low pressure
0 0 0 TH indicates thermal
Type1 PT1 PT2 PT3 PT4 PT5 PT6

4
0 1
K20 A20
K20
42 43
42 A21 43
Broken line cables are dependent on customer wish
3.1 3.2

0 NOTE1: DRAIN SYSTEM CAN BE TYPE1 OR TYPE2

More than one beko drains are connected parallel to each other
Type2 FIELD INSTALLED

Page 39
Page 40
X1
R R R R R R
L1 S S S S S S
L2
L3 T T T T T T
PE

F1 F2 F3 F4 A1 : Control circuit transformer

1A 1A 0.5A 0.5A
R13 P10 R14 P11 R15 P12 A30 : Compressor heater
P1 X1 : Mains supply connection terminal block
R11 S13 S14 S15 R7 S7
T13 T14 T15 R S T B15 : Control circuit supply
S11 Q1 EMR4 : Phase protection relay
Q1
T11
Q10 Q11 Q12 F1, F2 : A01 Primary protection
MK-US 3000 POWER

R6 S6 F3, F4 : A30 overload protection

R10 S10
Q1 Q1 : Compressor Contactor
Q10 : Fan1 contactor
R1 Q11 : Fan2 contactor
S1 A01
6.2 ELECTRICAL DIAGRAMS

R3 R4 R5 Q12 : Fan3 contactor

T1 S3 S4 S5
T3 T4 T5 A 30 M1: Compressor motor
M10 : Fan motor1
M11 : Fan motor2
M M M M M12 : Fan motor3
3 (T.P.) 3 (T.P.) 3 (T.P.) 3 46 0 P1 : Overload protector of compressor
EMR 4 B15 P10 : Overload protector of fan motor1
P11 : Overload protector of fan motor2
P12 : Overload protector of fan motor3
M1 M10 M11 M12

MAXIMUM SET: %15

FIELD INSTALLED

MAIN PROTECTION AND DISCONNECTING MEANS SHALL BE PROVIDED BY

THE INSTALLER OF RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER
ELECTRICAL SPECIFICATIONS
SUPPLY LINE VOLTAGE RATING - 600 VAC
COMPRESSOR FAN MOTOR
UN 460V/3/60 UN 460V/3/60
ELECTRICAL SUPPLY LINE
3 PHASE + PROTECTION EARTH
MK-US-3000 RLA 30,1A 12,40kW MK-US-3000 RLA 1,85A 1,25kW (x3)
CABLES SIZE
MK-US-3000 4AWG5
 F10, F11 : Control circuit protection
S2: Limit Switch
S5 : Remote control start button
46 S7 : Remote control stop button
S3 : Emergency Button
F10
P1 : Overload protector of compressor
4A

42
P2 : Overload protector of compressor

42
P10 : Overload protector of fan motor
S3 P11 : Overload protector of fan motor
P12 : Overload protector of fan motor
S31: Fan heat thermal 1

43 43
BN S32: Fan heat thermal 2
S2
BU S33: Fan heat thermal 3
1 1 1 1 1 EMR4 : Phase protection relay
S8 : Remote control contact
S31 S8
S9 : Obstruction for manual on/off
TH S15 : Service contact
S32
11 14 14 14 S10 : Fan pressure switch
TH

1
S33 EMR4 Q10 Q11 Q12
14
S5 13 13 13 S13
S12 : High Pressure safety switch
6.2 ELECTRICAL DIAGRAMS

TH
LP S13 : Low Pressure safety switch
S7 Q1 : Compressor motor contactor
S9 S15
1 Q2 : Compressor motor contactor
S12
P1 13 P2 P10 13 P11 13 P12 13 HP
13
MK-US 3600 - 4000 CONTROL

Q10 : Fan motor contactor

14 14 14
24 V AC 14 14 Q11 : Fan motor contactor
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Q12 : Fan motor contactor
V1: Bypass valve
1 A20 : Electronic timer-drain supply (Optional)
A11 A13
K20: Drain supply test relay
A21:Drain test
V1 A41 A11 : Remote control running lamp (green)

3
4
1 A13 : Remote control stand-by lamp (red)
A41 : Remote control alarm contact
F N TRXA TRXB GND +A02 -A02 PT1 : Inlet air temperature sensor (PT100)
Q1

12 PT2 : Heat exchanger temperature sensor (PT100)

0
13

0
36 PT3 : Low pressure line sensor (PT100)
44 45 PT4 : High pressure line sensor (PT100)
P S10 NOTE1 B16
B17 PT5 : Ambient temperature sensor (PT100)
PT6 : Condenser outlet temperature sensor (PT100)
B16 : Computer/Communication connection (RS 485)

35

35
35
- + - + - + - + - + - +
Q1 Q2 C B17 : Dew point analog output (4-20mA/0-100 C)
01 02 03 04 05 06
Q10 Q11 Q12 0 4 HP indicates high pressure
A20
0 LP indicates low pressure
0 0 0
Type1 PT1 PT2 PT3 PT4 PT5 PT6 TH indicates thermal

4
K20
0 1
A20
K20 FIELD INSTALLED
42 43
42 A21 43 Broken line cables are dependent on customer wish
3.1 3.2

0
More than one beko drains are connected parallel to each other NOTE1: DRAIN SYSTEM CAN BE TYPE1 OR TYPE2
Type2

Page 41
Page 42
X1
R R R R R R
L1 S S S S S S
L2 T T
L3 T T T T
PE

F1 F2 F3 F4
1A 1A 1A 1A
R13 P10 R14 P11 R15 P12
P1 P2
S13 S14 S15
R11 R12 R7 S7
T13 T14 T15 R S R6
S11 S12
T
T11 T12 Q1 Q1
Q10 Q11 Q12
S6
Q1 Q2
S10 S10
R1 R2 R10 R10
S1 S2 A01
R3 R4 R5
T1 T2 S3 S4 S5
T3 T4 T5 A 30 A 31
6.2 ELECTRICAL DIAGRAMS
MK-US 3600 - 4000 POWER

M M M M M
3 3 (T.P.) 3 (T.P.) 3 (T.P.) 3 46 0
EMR 4 B15

A1 : Control Circuit transformer

M1 M2 M10 M11 M12 A30 : Compressor heater1
A31 : Compressor heater2
X1 : Mains supply connection terminal block
B15 : Control circuit supply
MAXIMUM SET: %15
EMR4 : Phase protection relay
F1, F2 : A01 Primary protection
FIELD INSTALLED F3, F4 : A30 overload protection
MAIN PROTECTION AND DISCONNECTING MEANS SHALL BE PROVIDED BY
THE INSTALLER OF RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER Q1 : Compressor Contactor
Q2 : Compressor Contactor
SUPPLY LINE VOLTAGE RATING - 600 VAC Q10 : Fan contactor
Q11 : Fan contactor
ELECTRICAL SPECIFICATIONS
M1: Compressor motor1
M2:Compressor motor 2
ELECTRICAL SUPPLY LINE
3 PHASE + PROTECTION EARTH M10 : Fan motor1
COMPRESSOR FAN MOTOR M11 : Fan motor2
UN 460V/3/60 UN 460V/3/60
CABLES SIZE M12 : Fan motor3
MK-US-3600 4AWG3 M13 : Fan motor4
MK-US-3600 RLA 22,4A 7,75kW (x2) MK-US-3600 RLA 1,85A 1,25kW (x3)
MK-US-4000 RLA 22,4A 7,80kW (x2) MK-US-4000 4AWG3 P1 : Overload protector of compressor1
MK-US-4000 RLA 1,85A 1,25kW (x3)
P2: Overload protector of compressor2
P10 : Overload protector of fan motor
P11 : Overload protector of fan motor
 46 F10, F11 : Control circuit protection
S2: Limit Switch
F10 S5 : Remote control start button
4A S7 : Remote control stop button

42
S3 : Emergency Button

42
P1 : Overload protector of compressor
S3
P2 : Overload protector of compressor
P10 : Overload protector of fan motor

43 43
BN
P11 : Overload protector of fan motor
S2 P12 : Overload protector of fan motor
BU

1 1
P13 : Overload protector of fan motor
1 1
P14 : Overload protector of fan motor
S31
P15 : Overload protector of fan motor
TH S31: Fan heat thermal 1
41
S32 S32: Fan heat thermal 2
TH EMR4

Q11
Q13
Q14

Q10
Q12
Q15
S02 S33: Fan heat thermal 3
P1 P2 42 S13
LP S04
S34: Fan heat thermal 4
S03 P10 P11
S05
P12 P15
MK-US 5000 CONTROL

P13 P14 S35: Fan heat thermal 5

S06
1 S33
S12 S36: Fan heat thermal 6
TH
HP
43 EMR4 : Phase protection relay
S34
6.2 ELECTRICAL DIAGRAMS

TH S8 : Remote control contact

1 44 S9 : Obstruction for manual on/off
S35
1
24 V AC TH S15 : Service contact
45 S10 : Fan pressure switch
S36
TH S12 : High Pressure safety switch
1
S13 : Low Pressure safety switch
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Q1 : Compressor motor contactor
Q2 : Compressor motor contactor
A10 A11 Q10 : Fan motor contactor
A41
Q11 : Fan motor contactor
1 V1
3 Q12 : Fan motor contactor
Q13 : Fan motor contactor
Q1 Q14 : Fan motor contactor
+AO2 -AO2 TRXA TRXB GND
F N Q15 : Fan motor contactor
36
12 13 V1: Bypass valve
S10 P
A20 : Electronic timer-drain supply (Optional)
1 NOTE1 K20: Drain supply test relay

35
0 A21:Drain test

35

35
Q12 Q13 Q1 Q2 B16 A11 : Remote control running lamp (green)
44 45 A13 : Remote control stand-by lamp (red)
Q10 Q11 Q14 Q15 A20 A41 : Remote control alarm contact
0 B17
PT1 : Inlet air temperature sensor (PT100)
Type1 PT2 : Heat exchanger temperature sensor (PT100)
PT3 : Low pressure line sensor (PT100)
- + - + - + - + - + - +
C PT4 : High pressure line sensor (PT100)
01 02 03 04 05 06 PT5 : Ambient temperature sensor (PT100)
PT6 : Condenser outlet temperature sensor (PT100)

4
0 1 B16 : Computer/Communication connection (RS 485)
K20 A20
K20 B17 : Dew point analog output (4-20mA/0-100 C)
42 43 PT1 PT2 PT3 PT4 PT5 PT6 HP indicates high pressure
42 A21 43 LP indicates low pressure
3.1 3.2
TH indicates thermal
0 Broken line cables are dependent on customer wish
More than one beko drains are connected parallel to each other
Type2 NOTE1: DRAIN SYSTEM CAN BE TYPE1 OR TYPE2

Page 43
Page 44
X1
R R R R R R R
L1 S S S S S S S
L2
L3 T T T T T T T
PE

F1 F2 F3 F4
1A 1A 1A 1A
R13 P10 R14 P11 R15 P12 R16 P13 R17 P14 R18 P15
P1 P2
R11 R12 S13 S14 S15 S16 S17 S18 R19 S19
T13 T14 T15 T16 T17 T18 R S T
S11 S12 Q1 Q1
T11 T12
Q10 Q11 Q12 Q13 Q14 Q15 R9
S9
Q1 Q2
S10 S10
MK-US 5000 POWER

R1 R2
S1 S2 A01 R10 R10
R3 R4 R5 R6 R7 R8
T1 T2 S3 S4 S5 S6 S7 S8 A 31
T3 T4 T5 T6 T7 T8 A 30

M M
6.2 ELECTRICAL DIAGRAMS

M M M M M M
3 3 (T.P.) 3 (T.P.) 3 (T.P.) 3 (T.P.) 3 (T.P.) 3 (T.P.) 3 46 0
EMR 4 B15

A1 : Control circuit transformer

M1 M2 M10 M11 M12 M13 M14 M15 A30 : Compressor heater1
A31 : Compressor heater2
X1 : Mains supply connection terminal block
B15 : Control circuit supply
MAXIMUM SET: %15 EMR4 : Phase protection relay
F1, F2 : A01 Primary protection
F3, F4 : A30 overload protection
FIELD INSTALLED Q1 : Compressor contactor
Q2 : Compressor contactor
Q10 : Fan contactor
Q11 : Fan contactor
Q12 : Fan contactor
Q13 : Fan contactor
Q14 : Fan contactor
Q15 : Fan contactor
M1: Compressor motor1
M2: Compressor motor2
M10 : Fan motor1
MAIN PROTECTION AND DISCONNECTING MEANS SHALL BE PROVIDED BY M11 : Fan motor2
THE INSTALLER OF RESIDUAL CURRENT AUTOMATIC CIRCUIT BREAKER M12 : Fan motor3
ELECTRICAL SPECIFICATIONS M13 : Fan motor4
SUPPLY LINE VOLTAGE RATING - 600 VAC M14 : Fan motor5
M15 : Fan motor6
COMPRESSOR FAN MOTOR P1 : Overload protector of compressor1
UN 460V/3/60 UN 460V/3/60 P2: Overload protector of compressor2
ELECTRICAL SUPPLY LINE
3 PHASE + PROTECTION EARTH P10 : Overload protector of fan motor
MK-US-5000 RLA 25A 9,25kW (x2) MK-US-5000 RLA 1,85A 1,25kW (x6)
P11 : Overload protector of fan motor
CABLES SIZE P12 : Overload protector of fan motor
MK-US-5000 4AWG2 P13 : Overload protector of fan motor
P14 : Overload protector of fan motor
P15 : Overload protector of fan motor
 8. MK-US

ID DIAGRAM DRAWINGS &

GENERAL ARRANGEMENTS

Page 45
Page 46
16,65" [423mm]
MK-US 10

15,48" [393mm]
2,56" [65mm] 6,04" [153,5mm] 2,83" [72mm]
TOP VIEW
DİGİTAL AIR INLET AIR OUTLET
CONTROLLER 1/2" NPT 1/2" NPT
CO ET
OL
IN TL
6.3 ID DIAGRAM DRAWINGS

G OU
AIR AIR
IN ING
LE
T OL 1,16" [29,4mm] CABLE
CO

2,46" [62,4mm]
CONNECTION

22,32" [566,8mm]
17,32" [440mm]
18,72" [475,5mm]

3,94" [100mm]
Drain
4,33" [110mm]
LEFT VIEW FRONT VIEW RIGHT VIEW BACK VIEW

2,03" [51,5mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

11,42" [290mm]
BOTTOM VIEW

2,03" [51,5mm]
0,51" [13mm] 15,63" [397mm] 0,51" [13mm]
 16,65" [423mm] MK-US 15

15,48" [393mm]
2,56" [65mm] 6,04" [153,5mm] 2,83" [72mm]
TOP VIEW
DİGİTAL AIR INLET AIR OUTLET
CONTROLLER 1/2" NPT 1/2" NPT
CO ET
OL TL
6.3 ID DIAGRAM DRAWINGS

IN OU
G
AIR AIR
IN G
LE IN
T OL 1,16" [29,4mm] CABLE
CO
2,46" [62,4mm]
CONNECTION

22,32" [566,8mm]
17,32" [440mm]
18,72" [475,5mm]

3,94" [100mm]

Drain
4,33" [110mm]
LEFT VIEW FRONT VIEW RIGHT VIEW BACK VIEW

2,03" [51,5mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

11,42" [290mm]
BOTTOM VIEW

2,03" [51,5mm]
0,51" [13mm] 15,63" [397mm] 0,51" [13mm]

Page 47
Page 48
16,65" [423mm] MK-US 25

15,48" [393mm]
2,56" [65mm] 6,04" [153,5mm] 2,83" [72mm]
TOP VIEW
DİGİTAL AIR INLET AIR OUTLET
CONTROLLER 1/2" NPT 1/2" NPT
CO ET
OL TL
6.3 ID DIAGRAM DRAWINGS

IN OU
G
AIR AIR
IN G
L IN
ET OL 1,16" [29,4mm] CABLE
CO
2,46" [62,4mm]
CONNECTION

22,32" [566,8mm]
17,32" [440mm]
18,72" [475,5mm]

3,94" [100mm]

Drain
4,33" [110mm]
LEFT VIEW FRONT VIEW RIGHT VIEW BACK VIEW

2,03" [51,5mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

11,42" [290mm]
BOTTOM VIEW

2,03" [51,5mm]
0,51" [13mm] 15,63" [397mm] 0,51" [13mm]
 16,65" [423mm]
MK-US 30

15,48" [393mm]
2,56" [65mm] 6,04" [153,5mm] 2,83" [72mm]
TOP VIEW
DİGİTAL AIR INLET AIR OUTLET
CONTROLLER 1/2" NPT 1/2" NPT
CO T
OL TLE
IN
6.3 ID DIAGRAM DRAWINGS

G OU
AIR AIR
IN ING
LE
T OL 1,16" [29,4mm] CABLE
CO
2,46" [62,4mm]
CONNECTION

22,32" [566,8mm]
17,32" [440mm]
18,72" [475,5mm]

3,94" [100mm]

Drain
4,33" [110mm]
LEFT VIEW FRONT VIEW RIGHT VIEW BACK VIEW

2,03" [51,5mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

11,42" [290mm]
BOTTOM VIEW

2,03" [51,5mm]
0,51" [13mm] 15,63" [397mm] 0,51" [13mm]

Page 49
Page 50
18,64" [473mm]

MK-US 35

17,85" [453mm]
3,17" [80,5mm] 5,11" [129,6mm] 3,23" [82mm]

TOP VIEW AIR INLET

3/4" NPT AIR OUTLET
DİGİTAL 3/4" NPT
CONTROLLER
CABLE
T
LE CONNECTION
CO OUT
OL
IN G AIR
GA
IR IN
IN OL
LE CO
T 1,16" [29,35mm]

3,05" [77,5mm]
6.3 ID DIAGRAM DRAWINGS

32,77" [831,8mm]
28,56" [725mm]

27,35" [694,1mm]

3,94" [100mm]

DRAIN
3,94" [100mm]
LEFT VIEW FRONT VIEW BACK VIEW

2,03" [51,5mm]
RIGHT VIEW
Ø0,551"(14mm)*4
MOUNTING HOLES

13,79" [350mm]
2,03" [51,5mm]
0,51" [13mm] 17,61" [447mm] 0,51" [13mm]

BOTTOM VIEW
 18,64" [473mm]

MK-US 60

17,85" [453mm]
3,17" [80,5mm] 5,11" [129,6mm] 3,23" [82mm]

TOP VIEW AIR INLET

3/4" NPT AIR OUTLET
DİGİTAL 3/4" NPT
CONTROLLER
CABLE
ET CONNECTION
TL
CO
OL OU
IN G AIR
GA
IR IN
IN OL
LE CO
T 1,16" [29,35mm]

3,05" [77,5mm]
6.3 ID DIAGRAM DRAWINGS

32,77" [831,8mm]
28,56" [725mm]

27,35" [694,1mm]

3,94" [100mm]

DRAIN
3,94" [100mm]
LEFT VIEW FRONT VIEW BACK VIEW

2,03" [51,5mm]
RIGHT VIEW
Ø0,551"(14mm)*4
MOUNTING HOLES

13,79" [350mm]
2,03" [51,5mm]
0,51" [13mm] 17,61" [447mm] 0,51" [13mm]

BOTTOM VIEW

Page 51
Page 52
18,64" [473mm]

MK-US 75

17,85" [453mm]
3,17" [80,5mm] 5,11" [129,6mm] 3,23" [82mm]

TOP VIEW AIR INLET

3/4" NPT AIR OUTLET
DİGİTAL 3/4" NPT
CONTROLLER
CABLE
L ET CONNECTION
T
CO OU
OL
IN IR
GA GA
IR LIN
IN COO
LET
1,16" [29,35mm]

3,05" [77,5mm]
6.3 ID DIAGRAM DRAWINGS

32,77" [831,8mm]
28,56" [725mm]

27,35" [694,1mm]

3,94" [100mm]
DRAIN
3,94" [100mm]
LEFT VIEW FRONT VIEW BACK VIEW

2,03" [51,5mm]
RIGHT VIEW
Ø0,551"(14mm)*4
MOUNTING HOLES

13,79" [350mm]
2,03" [51,5mm]
0,51" [13mm] 17,61" [447mm] 0,51" [13mm]

BOTTOM VIEW
 21,83" [554mm]

MK-US 100

19,86" [504mm]
4,12" [104,7mm] 6,64" [168,6mm] 3,96" [100,5mm]
TOP VIEW
AIR OUTLET
DİGİTAL AIR INLET 1 1/2" NPT
4,99" [126,8mm]

CONTROLLER 1 1/2" NPT

ET
CO TL
OL OU
IN IR
G GA
AIR IN
IN OL
LE CO
T
6.3 ID DIAGRAM DRAWINGS

1,16" [29,5mm]

3,74" [95mm]
CABLE
CONNECTION

34,40" [873,8mm]
27,60" [701mm]

3,94" [100mm]

DRAIN

LEFT VIEW FRONT VIEW RIGHT VIEW 5,91" [150mm]

BACK VIEW

1,97" [50mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

15,76" [400mm]
BOTTOM VIEW

1,97" [50mm]
0,42" [10,8mm] 20,82" [528,5mm] 0,42" [10,8mm]

Page 53
Page 54
21,83" [554mm]

MK-US 125

19,86" [504mm]
4,12" [104,7mm] 6,64" [168,6mm] 3,96" [100,5mm]
TOP VIEW
AIR OUTLET
DİGİTAL AIR INLET 1 1/2" NPT
4,99" [126,8mm]

CONTROLLER 1 1/2" NPT

T
CO T LE
OL OU
IN IR
GA GA
IR IN
IN OL
LE CO
T
1,16" [29,5mm]
6.3 ID DIAGRAM DRAWINGS

3,74" [95mm]
CABLE
CONNECTION

34,40" [873,8mm]
27,60" [701mm]

3,94" [100mm]

DRAIN

LEFT VIEW FRONT VIEW RIGHT VIEW 5,91" [150mm]

BACK VIEW

1,97" [50mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

15,76" [400mm]
BOTTOM VIEW

1,97" [50mm]
0,42" [10,8mm] 20,82" [528,5mm] 0,42" [10,8mm]
 21,83" [554mm]

MK-US 140

19,86" [504mm]
4,12" [104,7mm] 6,64" [168,6mm] 3,96" [100,5mm]
TOP VIEW
DİGİTAL AIR OUTLET
AIR INLET 1 1/2" NPT
4,99" [126,8mm]

CONTROLLER 1 1/2" NPT

T
CO T LE
OL OU
IN IR
GA GA
IR
IN LIN
LE COO
T
1,16" [29,5mm]
6.3 ID DIAGRAM DRAWINGS

3,74" [95mm]
CABLE
CONNECTION

34,40" [873,8mm]
27,60" [701mm]

3,94" [100mm]

DRAIN

LEFT VIEW FRONT VIEW RIGHT VIEW 5,91" [150mm]

BACK VIEW

1,97" [50mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

15,76" [400mm]
BOTTOM VIEW

1,97" [50mm]
0,42" [10,8mm] 20,82" [528,5mm] 0,42" [10,8mm]

Page 55
Page 56
28,68" [728mm]

MK-US 175 (1P)

37,35" [948mm]
CO T
OL
IN LE
IN
GA
IR AIR
OU ING
TL OL
ET CO

7,84" [199mm] 6,00" [152,3mm]

MAIN SWICH DİGİTAL
AIR INLET AIR OUTLET CONTROLLER
3" NPT 3" NPT
REFRIGERANT DISCHARGE
6.3 ID DIAGRAM DRAWINGS

PRESSURE

9,70" [246,2mm]
REFRIGERANT SUCTION
PRESSURE

3,27" [82,3mm]

45,60" [1157,3mm]
EXIT RECORD

31,82" [807,7mm]
DRAIN 1"

7,13" [181mm]
10,6" [269mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

10,6" [269mm] 16,15" [410mm]

1,54" [39mm] 25,59" [650mm] 1,54" [39mm]
 28,68" [728mm]

MK-US 175

37,35" [948mm]
CO T
OL
IN LE
IN
GA
IR IR
OU GA
TL O LIN
ET CO

7,84" [199mm] 6,00" [152,3mm]

MAIN SWICH DİGİTAL
AIR INLET AIR OUTLET CONTROLLER
3" NPT 3" NPT
REFRIGERANT DISCHARGE
6.3 ID DIAGRAM DRAWINGS

PRESSURE

CABLE
CONNECTION

9,70" [246,2mm]
REFRIGERANT SUCTION
PRESSURE

3,27" [82,3mm]

45,60" [1157,3mm]

31,82" [807,7mm]
DRAIN 1"

7,13" [181mm]
10,6" [269mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

10,6" [269mm] 16,15" [410mm]

1,54" [39mm] 25,59" [650mm] 1,54" [39mm]

Page 57
Page 58
28,68" [728mm]

37,35" [948mm]
MK-US 200 (1P)

CO T
OL E
IN INL
GA
IR AIR
OU I NG
TL OL
ET CO

7,84" [199mm] 6,00" [152,3mm]

MAIN SWICH DİGİTAL
AIR INLET AIR OUTLET CONTROLLER
3" NPT 3" NPT
REFRIGERANT DISCHARGE
6.3 ID DIAGRAM DRAWINGS

PRESSURE

9,70" [246,2mm]
REFRIGERANT SUCTION
PRESSURE

3,27" [82,3mm]

45,60" [1157,3mm]
EXIT RECORD

31,82" [807,7mm]
DRAIN 1"

7,13" [181mm]
10,6" [269mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

10,6" [269mm] 16,15" [410mm]

1,54" [39mm] 25,59" [650mm] 1,54" [39mm]
 28,68" [728mm]

MK-US 200

37,35" [948mm]
CO T
OLIN LE
IN
GA
IR IR
OU GA
T O LIN
LE
T CO

7,84" [199mm] 6,00" [152,3mm]

MAIN SWICH DİGİTAL
AIR INLET AIR OUTLET CONTROLLER
3" NPT 3" NPT
6.3 ID DIAGRAM DRAWINGS

REFRIGERANT DISCHARGE
PRESSURE

CABLE
CONNECTION

9,70" [246,2mm]
REFRIGERANT SUCTION
PRESSURE

3,27" [82,3mm]

45,60" [1157,3mm]

31,82" [807,7mm]
DRAIN 1"

7,13" [181mm]
10,6" [269mm]
Ø0,551"(14mm)*4
MOUNTING HOLES

10,6" [269mm] 16,15" [410mm]

1,54" [39mm] 25,59" [650mm] 1,54" [39mm]

Page 59
Page 60
28,66" [728mm]

MK-US 250

37,32" [948mm]
CO
OL
IN L ET
G IN
AIR A IR
OU
TL I NG TOP VIEW
ET OL
CO
7,83" [198,9mm] 6,01" [152,7mm]
AIR INLET
AIR OUTLET DİGİTAL
2" NPT MAIN SWICH
2" NPT CONTROLLER
REFRIGERANT DISCHARGE
PRESSURE
6.3 ID DIAGRAM DRAWINGS

CABLE
CONNECTION

9,70" [246,4mm]
REFRIGERANT SUCTION
PRESSURE

1,48" [37,6mm]

53,91" [1369,3mm]
CABLE

40,43" [1027mm]
CONNECTION

7,11" [180,5mm]
1,16" [83,8mm]

3,30" [83,8mm] DRAIN

1/2" NPT
FRONT VIEW RIGHT VIEW BACK VIEW
LEFT VIEW

6,77" [172mm]
Ø0,551"(14mm)*4

10,59" [269mm]
MOUNTING HOLES

16,14" [410mm]
10,59" [269mm]
1,54" [39mm] 25,59" [650mm] 1,54" [39mm]

BOTTOM VIEW
 28,66" [728mm]

MK-US 350

37,32" [948mm]
CO
OL T
IN LE
GA IN
IR A IR
OUT I NG TOP VIEW
LE
T OL
CO
7,83" [198,9mm] 6,01" [152,7mm]
AIR INLET
AIR OUTLET DİGİTAL
2" NPT MAIN SWICH
2" NPT CONTROLLER
REFRIGERANT DISCHARGE
PRESSURE
6.3 ID DIAGRAM DRAWINGS

CABLE
CONNECTION

9,70" [246,4mm]
REFRIGERANT SUCTION
PRESSURE

1,48" [37,6mm]

53,91" [1369,3mm]
CABLE

40,43" [1027mm]
CONNECTION

7,11" [180,5mm]
1,16" [83,8mm]

3,30" [83,8mm] DRAIN

1/2" NPT
FRONT VIEW RIGHT VIEW BACK VIEW
LEFT VIEW

6,77" [172mm]
Ø0,551"(14mm)*4

10,59" [269mm]
MOUNTING HOLES

16,14" [410mm]
10,59" [269mm]
1,54" [39mm] 25,59" [650mm] 1,54" [39mm]

BOTTOM VIEW

Page 61
Page 62
28,66" [728mm]

MK-US 425

37,32" [948mm]
CO
OL T
IN LE
GA IN
IR A IR
OU
T I NG TOP VIEW
LE
T OL
CO
7,83" [198,9mm] 6,01" [152,7mm]
AIR INLET
AIR OUTLET DİGİTAL
2" NPT MAIN SWICH
2" NPT CONTROLLER
REFRIGERANT DISCHARGE
PRESSURE
6.3 ID DIAGRAM DRAWINGS

CABLE
CONNECTION

9,70" [246,4mm]
REFRIGERANT SUCTION
PRESSURE

1,48" [37,6mm]

53,91" [1369,3mm]
CABLE

40,43" [1027mm]
CONNECTION

7,11" [180,5mm]
1,16" [83,8mm]

3,30" [83,8mm] DRAIN

1/2" NPT
FRONT VIEW RIGHT VIEW BACK VIEW
LEFT VIEW

6,77" [172mm]
Ø0,551"(14mm)*4

10,59" [269mm]
MOUNTING HOLES

16,14" [410mm]
10,59" [269mm]
1,54" [39mm] 25,59" [650mm] 1,54" [39mm]

BOTTOM VIEW
 CO
OL
IN
GA
IR
OU
TL
ET

31,44" [798mm] MK-US 550

CO T
OL LE
IN IN

37,32" [948mm]
GA IR
IR GA
OU IN
TL OL
ET CO

7,83" [198,9mm] 12,05" [305,6mm]

AIR OUTLET ESD
3" NPT CONTROLLER
AIR INLET
3" NPT REFRIGERANT DISCHARGE
PRESSURE
6.3 ID DIAGRAM DRAWINGS

CABLE
CONNECTION
REFRIGERANT SUCTION

10,34" [262,5mm]
PRESSURE

57,45" [1459,3mm]
3,27" [83mm]

40,09" [1018,1mm]
DRAIN 1"

10,59" [269mm]
Ø0,551"(14mm)*4

6,98" [177,3mm]
MOUNTING HOLES

16,14" [410mm]
10,60" [269mm]

1,54" [39mm] 28,35" [720mm] 1,54" [39mm]

Page 63
Page 64
CO
OL
IN
GA
IR
OU
TL
ET

31,44" [798mm]
MK-US 700

CO T
OL LE
IN IN

37,32" [948mm]
GA IR
IR GA
OU IN
TL OL
ET CO

7,83" [198,9mm] 12,05" [305,6mm]

AIR OUTLET ESD
3" NPT CONTROLLER
AIR INLET
3" NPT REFRIGERANT DISCHARGE
PRESSURE
6.3 ID DIAGRAM DRAWINGS

CABLE
CONNECTION
REFRIGERANT SUCTION

10,34" [262,5mm]
PRESSURE

57,45" [1459,3mm]
3,27" [83mm]

40,09" [1018,1mm]
DRAIN 1"

10,59" [269mm]
Ø0,551"(14mm)*4

6,98" [177,3mm]
MOUNTING HOLES

16,14" [410mm]
10,60" [269mm]

1,54" [39mm] 28,35" [720mm] 1,54" [39mm]

 CO
AIR OLIN
OU G
TL
ET

3,21"(81,5mm)
MK-US 900

COOLING
AIR INLET

19,68"(500mm) 19,68"(500mm)
3,21"(82mm) 24,21"(615mm) 3,21"(82mm)

TOP VIEW

3,21"(81mm)
45,79"(1163mm) 30,63"(778mm) 9,60"(244mm) 10,83"(275mm)
6.3 ID DIAGRAM DRAWINGS

REFRIGERANT DISCHARGE
PRESSURE REFRIGERANT SUCTION
PRESSURE
AIR INLET
3" NPT AIR OUTLET
3" NPT
ESD
CONTROLLER

EMERGENCY
BUTTON

6,42"(163mm)

67,81"(1722mm)
50,88"(1292mm)

47,18"(1199mm)

3,27"(83mm)

LEFT VIEW FRONT VIEW RIGHT VIEW DRAIN

1" NPT
BACK VIEW
1,54"(39mm) 27,56"(700mm) 1,54"(39mm)
6,99"(178mm)

12,26"(311mm)

12,28"(312mm)
15,04"(382mm)
17,80"(452mm)
M8x4
21,26"(540mm)

BOTTOM VIEW
12,26"(312mm)

Page 65
Page 66
CO
AIR OLIN
OU G
TL
ET

3,21"(81,5mm)
MK-US 1100

COOLING
AIR INLET

19,68"(500mm) 19,68"(500mm)
3,21"(82mm) 24,21"(615mm) 3,21"(82mm)

TOP VIEW

3,21"(81mm)
45,79"(1163mm) 30,63"(778mm) 9,60"(244mm) 10,83"(275mm)
6.3 ID DIAGRAM DRAWINGS

REFRIGERANT DISCHARGE
PRESSURE REFRIGERANT SUCTION
PRESSURE
AIR INLET
3" NPT AIR OUTLET
3" NPT
ESD
CONTROLLER

EMERGENCY
BUTTON

6,42"(163mm)

67,81"(1722mm)
50,88"(1292mm)

47,18"(1199mm)

3,27"(83mm)

LEFT VIEW FRONT VIEW RIGHT VIEW DRAIN

1" NPT
BACK VIEW
1,54"(39mm) 27,56"(700mm) 1,54"(39mm)
6,99"(178mm)

12,26"(311mm)

12,28"(312mm)
15,04"(382mm)
17,80"(452mm)
M8x4
21,26"(540mm)

BOTTOM VIEW
12,26"(312mm)
 CO
OU OLIN
TLE G A
T IR

2,14" (54,3mm)
25,36" (644,2mm)
MK-US 1350

COOLING
AIR INLET

25,36" (644,2mm)
3,29" (83,5mm) 26,77" (680mm) 3,29" (83,5mm)

TOP VIEW

2,14" (54,3mm)
55" (1397mm) 33,35" (847mm) 12,44" (316mm) 10,59" (269mm)
18,82" (478mm)
6.3 ID DIAGRAM DRAWINGS

REFRIGERANT SUCTION
PRESSURE

REFRIGERANT DISCHARGE AIR OUTLET

PRESSURE

ESD
CONTROLLER
4" FLANGE

EMERGENCY
10,75"(273mm)

BUTTON

AIR INLET
4,30" (109,2mm)
69,65" (1769mm)

6,70" (170,2mm)

DRAIN
1" NPT
40,08" (1018mm)

4,61" (177mm)

ELECTRICAL
LEFT VIEW CABINET
FRONT VIEW RIGHT VIEW 4,61" (117mm)

BACK VIEW

12,28" (311,9mm)
15,04" (381,9mm)
17,79" (451,9mm)
6,04" (153,5mm) 21,26" (540mm) 6,04" (153,5mm)

12,74" (323,5mm)
8
m)*
8m OLES
31"( H
Ø0, TING
UN
MO
29,53" (750mm)

BOTTOM VIEW
12,74" (323,5mm)

Page 67
Page 68
CO
O
OU LING
TLE
T AIR

2,14" (54,3mm)
2,14" (54,3mm)
MK-US 1500

25,36" (644,2mm)
25,36" (644,2mm)
COOLING
AIR INLET

25,36" (644,2mm)
25,36" (644,2mm)
3,29" (83,5mm) 26,77" (680mm) 3,29" (83,5mm) 3,29" (83,5mm) 26,77" (680mm) 3,29" (83,5mm)

TOP VIEW TOP VIEW

2,14" (54,3mm)
2,14" (54,3mm)
33,35" (847mm) 55" (1397mm) 12,44" (316mm) 10,59" (269mm)
33,35" (847mm) 12,44" (316mm) 10,59" (269mm)

18,82" (478mm)
18,82" (478mm)
6.3 ID DIAGRAM DRAWINGS

REFRIGERANT SUCTION REFRIGERANT SUCTION

PRESSURE PRESSURE

REFRIGERANT DISCHARGE AIR OUTLET REFRIGERANT DISCHARGE AIR OUTLET

PRESSURE PRESSURE

ESD ESD
CONTROLLER CONTROLLER
4" FLANGE 4" FLANGE

EMERGENCY EMERGENCY

10,75"(273mm)
10,75"(273mm)

BUTTON BUTTON

AIR INLET AIR INLET

4,30" (109,2mm)

69,65" (1769mm)
69,65" (1769mm)

6,70" (170,2mm)

DRAIN DRAIN
1" NPT 1" NPT

40,08" (1018mm)
40,08" (1018mm)

4,61" (177mm)
4,61" (177mm)

FRONT VIEW LEFT VIEW

RIGHTELECTRICAL
VIEW
CABINET (117mm)
4,61"FRONT VIEW RIGHT VIEW 4,61" (117mm)

BACK VIEW BACK VIEW

12,28" (311,9mm)
15,04" (381,9mm)
17,79" (451,9mm)
6,04" (153,5mm) 21,26" (540mm) 6,04" (153,5mm) 6,04" (153,5mm) 21,26" (540mm) 6,04" (153,5mm)

12,74" (323,5mm)
12,74" (323,5mm)

8 8
m)* m)*
8m OLES 8m OLES
31"( H 31"( H
Ø0, TING Ø0, TING
UN UN
MO MO

29,53" (750mm)
29,53" (750mm)

BOTTOM VIEW BOTTOM VIEW

12,74" (323,5mm)
12,74" (323,5mm)
 CO
OU OLI
TL NG 34,44" (874,7mm)
ET AI
R

24,90" (632,5mm)
MK-US 2000

COOLING
AIR INLET

24,90" (632,5mm)
TOP VIEW
42,40" (1077mm) 57,76" (1467mm) 12,42" (315,5mm) 11,66" (296,1mm)

19,69" (500,0mm)
6.3 ID DIAGRAM DRAWINGS

REFRIGERANT SUCTION
PRESSURE
REFRIGERANT
DISCHARGE AIR OUTLET
PRESSURE

ESD
CONTROLLER
4" FLANGE

4,17" (105,9mm)
AIR INLET
ELECTRICAL

75,83" (1926)
CABINET

DRAIN
1" NPT
45,41"(1153,5mm) 10,73" (272,5mm)

7,96" (202,3mm) 5,01" (127,2mm)

LEFT VIEW FRONT VIEW
RIGHT VIEW BACK VIEW
38,03" (966mm)

23,12" (587,2mm)
20,36" (517,2mm)
17,61" (447,2mm)
11,35" (288,4mm)

53,39" (1356mm)
)
7mm
9"(1
0.66

BOTTOM VIEW

Page 69
Page 70
CO
OU OLI
TL NG 34,44" (874,7mm)
ET AI
R

24,90" (632,5mm)
MK-US 2350

COOLING
AIR INLET

24,90" (632,5mm)
TOP VIEW
42,40" (1077mm) 57,76" (1467mm) 12,42" (315,5mm) 11,66" (296,1mm)

19,69" (500,0mm)
6.3 ID DIAGRAM DRAWINGS

REFRIGERANT SUCTION
PRESSURE
REFRIGERANT
DISCHARGE AIR OUTLET
PRESSURE

ESD
CONTROLLER
4" FLANGE

4,17" (105,9mm)
AIR INLET
ELECTRICAL

75,83" (1926)
CABINET

DRAIN
1" NPT
45,41"(1153,5mm) 10,73" (272,5mm)

7,96" (202,3mm) 5,01" (127,2mm)

LEFT VIEW FRONT VIEW
RIGHT VIEW BACK VIEW
38,03" (966mm)

23,12" (587,2mm)
20,36" (517,2mm)
17,61" (447,2mm)
11,35" (288,4mm)

53,39" (1356mm)
)
7mm
9"(1
0.66

BOTTOM VIEW
 CO
OL
IN
G
AI
R
OU
TL
ET

35,43" (900mm)
COOLING AIR
MK-US 2750

INLET

7,25" (184,1mm)
35,43" (900mm)
34,44" (874,7mm)

TOP VIEW
41,81" (1062mm) 86,13" (2187,6mm) 12,44" (316mm) 11,48" (291,6mm)
19,62" (498,4mm)

REFRIGERANT SUCTION
6.3 ID DIAGRAM DRAWINGS

PRESSURE
REFRIGERANT
ESD DISCHARGE AIR OUTLET
PRESSURE
CONTROLLER
6" FLANGE

4,22" (170,2mm)
10,73" (272,5mm)

4,28" (108,8mm) AIR INLET

ELECTRICAL
CABINET

75,75" (1924mm)
75,75" (1924,0mm)

DRAIN
1" NPT
45,40" (1153,1mm)

23,11" (587,1mm)
20,36" (517,1mm)
17,60" (447,1mm)
12,30" (312,5mm)

37,40" (950,0mm) 27,56" (700,0mm)

5,12" (130mm)

LEFT VIEW FRONT VIEW RIGHT VIEW BACK VIEW

37,44" (951mm)

81,76" (2076,6mm)
m)
7m
9"(1
.66
Ø0

BOTTOM VIEW

Page 71
Page 72
CO
OL
IN
G
AI
R
OU
TL
ET

35,43" (900mm)
COOLING AIR
INLET
MK-US 3000

7,25" (184,1mm)
35,43" (900mm)
34,44" (874,7mm)

TOP VIEW
41,81" (1062mm) 86,13" (2187,6mm) 12,44" (316mm) 11,48" (291,6mm)
19,62" (498,4mm)

REFRIGERANT SUCTION
6.3 ID DIAGRAM DRAWINGS

PRESSURE
REFRIGERANT
ESD DISCHARGE AIR OUTLET
PRESSURE
CONTROLLER
6" FLANGE

4,22" (170,2mm)
10,73" (272,5mm)

4,28" (108,8mm) AIR INLET

ELECTRICAL
CABINET

75,75" (1924mm)
75,75" (1924,0mm)

DRAIN
1" NPT
45,40" (1153,1mm)

23,11" (587,1mm)
20,36" (517,1mm)
17,60" (447,1mm)
12,30" (312,5mm)

37,40" (950,0mm) 27,56" (700,0mm)

5,12" (130mm)

LEFT VIEW FRONT VIEW RIGHT VIEW BACK VIEW

37,44" (951mm)

81,76" (2076,6mm)
m)
7m
9"(1
.66
Ø0

BOTTOM VIEW
 CO
O LIN
G
AI
R
OU
TL
ET

5,55" 5,55"
(141.5mm) (141.1mm)
18,13"
23,62"(600mm) (460.5mm) 23,62"(600mm)
MK-US 3600

COOLING
AIR INLET

35,16"(893mm)
TOP VIEW
6.3 ID DIAGRAM DRAWINGS

47,24"(1200.2mm) 22,33"(567.1mm) 13,46"(341.8mm)

88,46"(2247.2mm)

6,64"
(168.7mm) REFRIGERANT SUCTION
PRESSURE

REFRIGERANT
DISCHARGE AIR OUTLET
PRESSURE

ESD
6" FLANGE
CONTROLLER
11,93"
(303.1mm) 23,13" (587.5mm)

7,33"
(186.3mm)
AIR INLET
ELECTRICAL

80,46"(2043.8mm)
80,46"(2043.8mm)

CABINET
5,07"
(128.8mm)
45,41"(1153.3mm)

22,72"
19,97"
17,21"

(577.2mm)
(507.2mm)
12,30"

(437.2mm)
DRAIN

(312.5mm)
1" NPT 37,40"(950mm)
FRONT VIEW RIGHT VIEW BACK VIEW LEFT VIEW
84,09"(2136mm)

Ø0.669"(17mm)

42,76"(1086mm)
BOTTOM VIEW

Page 73
Page 74
CO
OL
IN
G
AI
R
OU
TL
ET

5,55" 5,55"
(141.5mm) (141.1mm)
18,13"
23,62"(600mm) (460.5mm) 23,62"(600mm)
MK-US 4000

COOLING
AIR INLET

35,16"(893mm)
TOP VIEW
6.3 ID DIAGRAM DRAWINGS

47,24"(1200.2mm) 22,33"(567.1mm) 13,46"(341.8mm)

88,46"(2247.2mm)

6,64"
(168.7mm) REFRIGERANT SUCTION
PRESSURE

REFRIGERANT
DISCHARGE AIR OUTLET
PRESSURE

ESD
6" FLANGE
CONTROLLER
11,93"
(303.1mm) 23,13" (587.5mm)

7,33"
(186.3mm)
AIR INLET
ELECTRICAL

80,46"(2043.8mm)
80,46"(2043.8mm)

CABINET
5,07"
(128.8mm)
45,41"(1153.3mm)

22,72"
19,97"
17,21"

(577.2mm)
(507.2mm)
12,30"

(437.2mm)
DRAIN

(312.5mm)
1" NPT
37,40"(950mm)
FRONT VIEW RIGHT VIEW BACK VIEW LEFT VIEW
84,09"(2136mm)

Ø0.669"(17mm)

42,76"(1086mm)
BOTTOM VIEW
 52,90"(1343,6mm)
AIR
ING ET
C O OL OUTL

10,22" 23,62"
MK-US 5000

10,22" 20,65"
COOLING
AIR INLET

23,62"
(600mm) (259,5mm) (525mm) (259,5mm) (600mm)
TOP VIEW 47,38"(1204mm)

61,02"(1550mm) 100,39"(2550mm) 3,94"(100mm) 32,76"(832mm)

6.3 ID DIAGRAM DRAWINGS

REFRIGERANT SUCTION
PRESSURE

REFRIGERANT
ESD DISCHARGE AIR OUTLET
CONTROLLER PRESSURE

EMERGENCY
BUTTON 8" FLANGE
4,11"
(104,3mm)
AIR INLET
CABLE CONNECTION

82,68"(2100mm)
7,94"(202mm)
58,32"(1481mm)
45,41"(1153mm)

25,87"
23,11"
20,36"

(657,1mm)
17,60"

(587,1mm)
(517,1mm)
(447,1mm)
31,50"(800mm) DRAIN
37,40"(950mm)
1" NPT 28,33"(720mm)
LEFT VIEW FRONT VIEW RIGHT VIEW
BACK VIEW

95,91"(2436mm)
m)
9"(17m
Ø0.66

56,54"(1436mm)

BOTTOM VIEW

Page 75
 7.GENERAL ARRANGEMENTS

Model Filter Quantity Element Type Length Width Height Weight

and Type (inch) (inch) (inch) (lbs)

MK-US 10 1*GKO45M X + 1*GKO45M Y MKO 45 KIT 15,47 16,65 22,32 70,40

MK-US 15 1*GKO45M X + 1*GKO45M Y MKO 45 KIT 15,47 16,65 22,32 70,40
MK-US 25 1*GKO45M X + 1*GKO45M Y MKO 45 KIT 15,47 16,65 22,32 70,40
MK-US 30 1*GKO70M X + 1*GKO70M Y MKO 70 KIT 15,47 16,65 22,32 77,00
MK-US 35 1*GKO150M X + 1*GKO150M Y MKO 150 KIT 17,83 18,62 32,76 112,20
MK-US 60 1*GKO150M X + 1*GKO150M Y MKO 150 KIT 17,83 18,62 32,76 116,60
MK-US 75 1*GKO150M X + 1*GKO150M Y MKO 150 KIT 17,83 18,62 32,76 121,00
MK-US 100 1*GKO500M X + 1*GKO500M Y MKO 500 KIT 19,84 21,81 34,41 171,60
MK-US 125 1*GKO500M X + 1*GKO500M Y MKO 500 KIT 19,84 21,81 34,41 182,60
MK-US 140 1*GKO500M X + 1*GKO500M Y MKO 500 KIT 19,84 21,81 34,41 189,20
MK-US 175 1*GKO851M X + 1*GKO851M Y MKO 851 KIT 25,51 26,69 45,55 352,00
MK-US 200 1*GKO1210M X + 1*GKO1210M Y MKO 1210 KIT 25,51 26,69 45,55 363,00
MK-US 250 1*GKO1210M X + 1*GKO1210M Y MKO 1210 KIT 37,32 28,66 53,94 484,00
MK-US 350 1*GKO1210M X + 1*GKO1210M Y MKO 1210 KIT 37,32 28,66 53,94 484,00
MK-US 425 1*GKO1210M X + 1*GKO1210M Y MKO 1210 KIT 37,32 28,66 53,94 506,00
MK-US 550 1*GKO1820M X + 1*GKO1820M Y MKO 1820 KIT 37,32 31,42 57,48 594,00
MK-US 700 1*GKO1820M X + 1*GKO1820M Y MKO 1820 KIT 37,32 31,42 57,48 627,00
MK-US 900 1*GKO2700M X + 1*GKO2700M Y MKO 2700 KIT 45,79 30,63 67,91 862,40
MK-US 1100 1*GKO2700M X + 1*GKO2700M Y MKO 2700 KIT 45,79 30,63 67,91 902,00
MK-US 1350 Not Included Not Included 55,00 33,35 69,69 1.082,40
MK-US 1500 Not Included Not Included 55,00 33,35 69,69 1.144,00
MK-US 2000 Not Included Not Included 57,76 42,40 75,98 1.531,20
MK-US 2350 Not Included Not Included 57,76 42,40 75,98 1.579,60
MK-US 2750 Not Included Not Included 86,14 41,81 75,79 1.980,00
MK-US 3000 Not Included Not Included 86,14 41,81 75,79 2.035,00
MK-US 3600 Not Included Not Included 88,46 35,31 77,76 2.145,00
MK-US 4000 Not Included Not Included 88,46 35,31 77,76 2.420,00
MK-US 5000 Not Included Not Included 100,39 61,02 82,68 3.080,00

ALL Superheat of Evaporating Fan Security Security Drain Refrigerant Water flow
MODELS thermostatic pressure pressure high low timer temperature valve
expansion switch pressure pressure switch (if water
valve switch switch condenser)

41.0 °F -50.0 °F 29.7 psi 130.5 - 174 psi 162,5 psi 23.2 psi 5 min. -5sec. 113 °F 159.5 psi

Page 76
 8. MK-US
EXPLODED DIAGRAMS &
SPARE PART LISTS

Page 77
Page 78
58 50

49
59 40
38
32 39
61 29 33

34
60
55 42
54
MK-US 10

56 10
36
61
57
11 28 31
35
8.1 - ED & Spare Part List

62 15 35
63 18

41 37
44
45 16
19 20
30
12
6
18
17
52 15 26
13 14
25

44
43
24
23
53 27
63 21
1 22
45

46
48

50
8
47 2
9
3 7
4 5
51 6
 63 MK60E-RTA2 ROTOLOCK ADAPTOR2 2

MK130E-DPI-115
CONTROLLER
62 MK130E-PWC POWER CABLE 1

MK130E-DPI
MK130E-DPI
DIGITAL
48 61 MK90E-RVT3,5 RIVET Ø3,5 25
60 MK90E-CSP CABLE STRAP 3
59 M-FAS-6000 CABINET FASTENER 8
M-CSC-0015-220-1-50 58 MK30E-CAT 1

M-CSC-0015-115-1-60
CABINET TOP
MK20E-CSC-230-1-60
START CAPASITOR

57 2
COMPRESSOR

MK30E-CSG CABINET STRIPPING

56 M-CHN-6000 CABINET HANDLE (NEW) 2
25

55 MK30E-CBR CABINET RIGHT 1

54 MK30E-CLT CABINET LEFT 1
53 MK260E-RNT8 RIVET NUT M8 4
OVERLOAD PROTECTOR

52 MK260E-CG11
MK20E-COP-230-1-60
M-COP-0015-115-1-60

1
M-COP-0015-220-1-50

CABLE GLAND PG11

COMPRESSOR

51 MK30E-COP CONTROLLER PANEL 1

50 MK90E-BLT412 18
24

BOLT M4x12
49 M-STU-6000 CABINET STUD AND NUT 8
48 SEE.REF TABLE DIGITAL CONTROLLER 1
47 MK260E-PCP PLASTIC CONTROL PANEL 1
MK20E-CSR-230-1-60
M-CSR-0015-115-1-60
M-CSR-0015-220-1-50

46 M-FNS-0200 FAN ON/OFF SWITCH 1

START RELAY
COMPRESSOR

45 M-DRI-0200 DRYER-DEHYDRATOR 1
23

44 M-BYV-0100 EXPANSION VALVE 1

43 MK260E-STC SETTING THE CONNECTION 1
42 MK60E-BLT48 BOLT M4x8 8
41 MK35E-FTT-T TEE FITTING 1
MK20E-CMP-230-1-60
M-CMP-0015-115-1-60
M-CMP-0015-220-1-50

40 MK30E-CAI CABINET INSIDE 1

COMPRESSOR

39 MK30E-CRT CABINET REAR TOP 1

21

38 MK30E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1

37 MK30E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1
36 MK90E-GFD GASKET FOR DRAIN 1
35 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 1
SOLENOID VALVE

34 MK30E-EXS HEAT EXCHANGER SUPPORT STEEL 1

M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115

33 MK30E-ORG ORING 4
19

32 MK30E-CNK-NPT CONNECTION CIT 2

31 MK30E-CPG COUPLING CLAMP 4
30 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
M-FMT-0075-220/230-1-50/60

29 MK30E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

28 MK30E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
M-FMT-0075-115-1-60

27 MK30E-NT6 NUT M6 4
FAN MOTOR

26 MK30E-WSR18 WASHER 18x7x1mm 4

MK40E-FMT
5

25 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

24 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
23 SEE.REF TABLE COMPRESSOR START RELAY 1
22 MK40E-CEC COMPRESSOR ELECTRICAL BOX COVER 1
AIR COOLED
AIR COOLED
AIR COOLED
COOLING

21 SEE.REF TABLE COMPRESSOR 1

20 MK260E-SVC SOLENOID VALVE COIL 1
19 SEE.REF TABLE SOLENOID VALVE 1
18 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
POWER RATINGS

17 MK170E-NIP1/4 1 / 4" NIPPLE 2

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

16 MK170E-T1/4 1 / 4" T CONNECTOR 1

15 MK170E-CHV CHECH VALVE 2
14 MK150E-RDC REDUCTION 3/8" - 1/4" 1
13 M-DBV-0200 DRAIN BALL VALVE 1
DRYER PART NUMBER

1/2" RECORD
8.1 - ED & Spare Part List

12 MK260E-RCD 1
11 MK30E-IHE INSULATION OF HEAT EXCHANGER 1
MKUS-10
MKUS-10
MKUS-10

10 MK30E-EXC HEAT EXCHANGER 1

9 MK110E-WHR20 WASHER 20x4,3x1,5 1
8 MK110E-BLT414 BOLT M4x14mm 1
MK-US 10

7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30mm 8
CAPACITY

10 SCFM
10 SCFM
10 SCFM

5 SEE.REF TABLE FAN MOTOR 1

4 M-GRL-0075 FAN GRİLL 1
3 M-FAN-0075 FAN GLADE 1
2 MK30E-CON CONDANSER 1
1 MK30E-CAB CABINET BASE 1
MK-10 US
MK-10 US
MK-10 US
DECAL

DWG ITEM PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST

Page 79
Page 80
58 50

49
59 40
38
32 39
61 29 33

34
60
55 42
54
MK-US 15
56 10
36
61
57
11 28 31
35
8.1 - ED & Spare Part List

62 15 35
63 18

41 37
44
45 16
19 20
30
12
6
18
17
52 15 26
13 14
25

44
43
24
23
53 27
63 21
1 22
45

46
48

50
8
47 2
9
3 7
4 5
51 6
 63 MK60E-RTA2 ROTOLOCK ADAPTOR2 2

MK130E-DPI-115
CONTROLLER
62 MK130E-PWC POWER CABLE 1

MK130E-DPI
MK130E-DPI
DIGITAL
61 MK90E-RVT3,5 RIVET Ø3,5
48
25
60 MK90E-CSP CABLE STRAP 3
59 M-FAS-6000 CABINET FASTENER 8
58 MK30E-CAT CABINET TOP 1
MK20E-CSC-230-1-60
M-CSC-0015-115-1-60
M-CSC-0015-220-1-50
START CAPASITOR

57 MK30E-CSG CABINET STRIPPING 2

COMPRESSOR

56 M-CHN-6000 CABINET HANDLE (NEW) 2

25

55 MK30E-CBR CABINET RIGHT 1

54 MK30E-CLT CABINET LEFT 1
53 MK260E-RNT8 RIVET NUT M8 4
OVERLOAD PROTECTOR

52 MK260E-CG11 CABLE GLAND PG11 1

MK20E-COP-230-1-60
M-COP-0015-115-1-60
M-COP-0015-220-1-50
COMPRESSOR

51 MK30E-COP CONTROLLER PANEL 1

50 MK90E-BLT412 BOLT M4x12 18
24

49 M-STU-6000 CABINET STUD AND NUT 8

48 SEE.REF TABLE DIGITAL CONTROLLER 1
47 MK260E-PCP PLASTIC CONTROL PANEL 1
MK20E-CSR-230-1-60
M-CSR-0015-115-1-60
M-CSR-0015-220-1-50

46 M-FNS-0200 FAN ON/OFF SWITCH 1

START RELAY
COMPRESSOR

45 M-DRI-0200 DRYER-DEHYDRATOR 1
23

44 M-BYV-0100 EXPANSION VALVE 1

43 MK260E-STC SETTING THE CONNECTION 1
42 MK60E-BLT48 BOLT M4x8 8
41 MK35E-FTT-T TEE FITTING 1
MK20E-CMP-230-1-60
M-CMP-0015-115-1-60
M-CMP-0015-220-1-50

40 MK30E-CAI CABINET INSIDE 1

COMPRESSOR

39 MK30E-CRT CABINET REAR TOP 1

21

38 MK30E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1

37 MK30E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1
36 MK90E-GFD GASKET FOR DRAIN 1
35 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 1
SOLENOID VALVE

34 MK30E-EXS
M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115

HEAT EXCHANGER SUPPORT STEEL 1

19

33 MK30E-ORG ORING 4
32 MK30E-CNK-NPT CONNECTION CIT 2
31 MK30E-CPG COUPLING CLAMP 4
30 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
M-FMT-0075-220/230-1-50/60

29 MK30E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

28 MK30E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
M-FMT-0075-115-1-60

27 MK30E-NT6 NUT M6 4
FAN MOTOR

26 4
MK40E-FMT

MK30E-WSR18 WASHER 18x7x1mm

5

25 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

24 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
23 SEE.REF TABLE COMPRESSOR START RELAY 1
22 MK40E-CEC COMPRESSOR ELECTRICAL BOX COVER 1
AIR COOLED
AIR COOLED
AIR COOLED
COOLING

21 SEE.REF TABLE COMPRESSOR 1

20 MK260E-SVC SOLENOID VALVE COIL 1
19 SEE.REF TABLE SOLENOID VALVE 1
18 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
POWER RATINGS

17 MK170E-NIP1/4 1 / 4" NIPPLE 2

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

16 MK170E-T1/4 1 / 4" T CONNECTOR 1

15 MK170E-CHV CHECH VALVE 2
14 MK150E-RDC REDUCTION 3/8" - 1/4" 1
13 M-DBV-0200 DRAIN BALL VALVE 1
DRYER PART NUMBER
8.1 - ED & Spare Part List

12 MK260E-RCD 1/2" RECORD 1

11 MK30E-IHE INSULATION OF HEAT EXCHANGER 1
MKUS-15
MKUS-15
MKUS-15

10 MK30E-EXC HEAT EXCHANGER 1

9 MK110E-WHR20 WASHER 20x4,3x1,5 1
8 MK110E-BLT414 BOLT M4x14mm 1
MK-US 15

7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30mm 8
CAPACITY

15 SCFM
15 SCFM
15 SCFM

5 SEE.REF TABLE FAN MOTOR 1

4 M-GRL-0075 FAN GRİLL 1
3 M-FAN-0075 FAN GLADE 1
2 MK30E-CON CONDANSER 1
MK-20 US
MK-20 US
MK-20 US

1 MK30E-CAB CABINET BASE 1

DECAL

DWG ITEM PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST

Page 81
Page 82
58 50

49
59 40
38
32 39
61 29 33

34
60
55 42
54
56
MK-US 25

10
36
61
57
11 28 31
35
8.1 - ED & Spare Part List

62 15 35
63 18

41 37
44
45 16
19 20
30
12
6
18
17
52 15 26
13 14
25

44
43
24
23
53 27
63 21
1 22
45

46
48

50
8
47 2
9
3 7
4 5
51 6
 63 MK60E-RTA2 ROTOLOCK ADAPTOR2 2

MK130E-DPI-115
CONTROLLER
62 MK130E-PWC POWER CABLE 1

MK130E-DPI
MK130E-DPI
DIGITAL
48 61 MK90E-RVT3,5 RIVET Ø3,5 25
60 MK90E-CSP CABLE STRAP 3
59 M-FAS-6000 CABINET FASTENER 8

M-CSC-0035-115-1-60
M-CSC-0035-220-1-50
M-CSC-0035-230-1-60
58 MK30E-CAT CABINET TOP 1
START CAPASITOR
COMPRESSOR

57 MK30E-CSG CABINET STRIPPING 2

25

56 M-CHN-6000 CABINET HANDLE (NEW) 2

55 MK30E-CBR CABINET RIGHT 1
54 MK30E-CLT CABINET LEFT 1
53 MK260E-RNT8 RIVET NUT M8 4
M-COP-0035-220/230-1-50/60
M-COP-0035-220/230-1-50/60

52 MK260E-CG11 CABLE GLAND PG11 1

OVERLOAD PROTECTOR

M-COP-0035-115-1-60

51 MK30E-COP CONTROLLER PANEL 1

COMPRESSOR

50 MK90E-BLT412 BOLT M4x12 18

24

49 M-STU-6000 CABINET STUD AND NUT 8

48 SEE.REF TABLE DIGITAL CONTROLLER 1
47 MK260E-PCP PLASTIC CONTROL PANEL 1
46 M-FNS-0200 FAN ON/OFF SWITCH 1
M-CSR-0035-230-1-60
M-CSR-0035-115-1-60
M-CSR-0035-220-1-50

45 M-DRI-0200 DRYER-DEHYDRATOR 1
START RELAY
COMPRESSOR

44 M-BYV-0100 EXPANSION VALVE 1

23

43 MK260E-STC SETTING THE CONNECTION 1

42 MK60E-BLT48 BOLT M4x8 8
41 MK35E-FTT-T TEE FITTING 1
40 MK30E-CAI CABINET INSIDE 1
M-CMP-0035-220-1-50
M-CMP-0035-230-1-60
M-CMP-0035-115-1-60

39 MK30E-CRT CABINET REAR TOP 1

COMPRESSOR

38 MK30E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1

21

37 MK30E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1

36 MK90E-GFD GASKET FOR DRAIN 1
35 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 1
SOLENOID VALVE

34 MK30E-EXS HEAT EXCHANGER SUPPORT STEEL 1

M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115

33 MK30E-ORG ORING 4
19

32 MK30E-CNK-NPT CONNECTION CIT 2

31 MK30E-CPG COUPLING CLAMP 4
30 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
M-FMT-0075-220/230-1-50/60

29 MK30E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

28 MK30E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
M-FMT-0075-115-1-60

27 MK30E-NT6 NUT M6 4
FAN MOTOR

26 MK30E-WSR18 WASHER 18x7x1mm 4

MK40E-FMT
5

25 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

24 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
23 SEE.REF TABLE COMPRESSOR START RELAY 1
22 MK40E-CEC COMPRESSOR ELECTRICAL BOX COVER 1
AIR COOLED
AIR COOLED
AIR COOLED
COOLING

21 SEE.REF TABLE COMPRESSOR 1

20 MK260E-SVC SOLENOID VALVE COIL 1
19 SEE.REF TABLE SOLENOID VALVE 1
18 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
POWER RATINGS

17 MK170E-NIP1/4 1 / 4" NIPPLE 2

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

16 MK170E-T1/4 1 / 4" T CONNECTOR 1

15 MK170E-CHV CHECH VALVE 2
14 MK150E-RDC REDUCTION 3/8" - 1/4" 1
13 M-DBV-0200 DRAIN BALL VALVE 1
8.1 - ED & Spare Part List

DRYER PART NUMBER

12 MK260E-RCD 1/2" RECORD 1

11 MK30E-IHE INSULATION OF HEAT EXCHANGER 1
MKUS-25
MKUS-25
MKUS-25

10 MK30E-EXC HEAT EXCHANGER 1

9 MK110E-WHR20 WASHER 20x4,3x1,5 1
8 MK110E-BLT414 BOLT M4x14mm 1
MK-US 25

7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30mm 8
CAPACITY

25 SCFM
25 SCFM
25 SCFM

5 SEE.REF TABLE FAN MOTOR 1

4 M-GRL-0075 FAN GRİLL 1
3 M-FAN-0075 FAN GLADE 1
2 MK30E-CON CONDANSER 1
MK-30 US
MK-30 US
MK-30 US

1 MK30E-CAB CABINET BASE 1

DECAL

DWG ITEM PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST
Page 83
Page 84
58 50

49
59 40
38
32 39
61 29 33

34
60
55 42
54
MK-US 30

56 10
36
61
57
11 28 31
35
8.1 - ED & Spare Part List

62 15 35
63 18

41 37
44
45 16
19 20
30
12
18 6
17
52 15 26
13 14
25

44
43
24
23
53 27
63 21
1 22
45

46
48

50
8
47 2
9
3 7
4 5
51 6
 63 MK60E-RTA2 ROTOLOCK ADAPTOR2 2

MK130E-DPI-115
CONTROLLER
62 MK130E-PWC POWER CABLE 1

MK130E-DPI
MK130E-DPI
DIGITAL
48 61 MK90E-RVT3,5 RIVET Ø3,5 25
60 MK90E-CSP CABLE STRAP 3
59 M-FAS-6000 CABINET FASTENER 8
M-CSC-0035-220-1-50

M-CSC-0035-115-1-60
M-CSC-0035-230-1-60
58 MK30E-CAT CABINET TOP 1
START CAPASITOR
COMPRESSOR

57 MK30E-CSG CABINET STRIPPING 2

25

56 M-CHN-6000 CABINET HANDLE (NEW) 2

55 MK30E-CBR CABINET RIGHT 1
54 MK30E-CLT CABINET LEFT 1
53 MK260E-RNT8 RIVET NUT M8 4
M-COP-0035-220/230-1-50/60
M-COP-0035-220/230-1-50/60

52 MK260E-CG11 CABLE GLAND PG11 1

OVERLOAD PROTECTOR

51 MK30E-COP CONTROLLER PANEL 1

M-COP-0035-115-1-60
COMPRESSOR

50 MK90E-BLT412 BOLT M4x12 18

24

49 M-STU-6000 CABINET STUD AND NUT 8

48 SEE.REF TABLE DIGITAL CONTROLLER 1
47 MK260E-PCP PLASTIC CONTROL PANEL 1
46 M-FNS-0200 FAN ON/OFF SWITCH 1
M-CSR-0035-220-1-50

M-CSR-0035-115-1-60
M-CSR-0035-230-1-60

45 M-DRI-0200 DRYER-DEHYDRATOR 1
START RELAY
COMPRESSOR

44 M-BYV-0100 EXPANSION VALVE 1

23

43 MK260E-STC SETTING THE CONNECTION 1

42 MK60E-BLT48 BOLT M4x8 8
41 MK35E-FTT-T TEE FITTING 1
40 MK30E-CAI CABINET INSIDE 1
M-CMP-0035-220-1-50
M-CMP-0035-230-1-60
M-CMP-0035-115-1-60

39 MK30E-CRT CABINET REAR TOP 1

COMPRESSOR

38 MK35E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1

21

37 MK35E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1

36 MK90E-GFD GASKET FOR DRAIN 1
35 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 1
34 MK30E-EXS HEAT EXCHANGER SUPPORT STEEL 1
SOLENOID VALVE

M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115

33 MK30E-ORG ORING 4
32 MK30E-CNK-NPT CONNECTION CIT 2
19

31 MK30E-CPG COUPLING CLAMP 4

30 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
29 MK35E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
M-FMT-0075-220/230-1-50/60

28 MK35E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1

27 MK30E-NT6 NUT M6 4
M-FMT-0075-115-1-60

26 MK30E-WSR18 WASHER 18x7x1mm 4

FAN MOTOR

25 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

MK40E-FMT
5

24 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1

23 SEE.REF TABLE COMPRESSOR START RELAY 1
22 MK40E-CEC COMPRESSOR ELECTRICAL BOX COVER 1
21 SEE.REF TABLE COMPRESSOR 1
AIR COOLED
AIR COOLED
AIR COOLED
COOLING

20 MK260E-SVC SOLENOID VALVE COIL 1

19 SEE.REF TABLE SOLENOID VALVE 1
18 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
17 MK170E-NIP1/4 1 / 4" NIPPLE 2
16 MK170E-T1/4 1 / 4" T CONNECTOR 1
POWER RATINGS

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

15 MK170E-CHV CHECH VALVE 2

14 MK150E-RDC REDUCTION 3/8" - 1/4" 1
13 M-DBV-0200 DRAIN BALL VALVE 1
8.1 - ED & Spare Part List

12 MK260E-RCD 1/2" RECORD 1

11 MK30E-IHE INSULATION OF HEAT EXCHANGER 1
DRYER PART NUMBER

10 MK30E-EXC HEAT EXCHANGER 1

MKUS-30
MKUS-30
MKUS-30

9 MK110E-WHR20 WASHER 20x4,3x1,5 1

8 MK110E-BLT414 BOLT M4x14mm 1
MK-US 30

7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30mm 8
5 SEE.REF TABLE FAN MOTOR 1
CAPACITY

4 M-GRL-0075 FAN GRİLL 1

30 SCFM
30 SCFM
30 SCFM

3 M-FAN-0075 FAN GLADE 1

2 MK30E-CON CONDANSER 1
1 MK30E-CAB CABINET BASE 1
DWG ITEM
MK-35 US
MK-35 US
MK-35 US

PART NO. DESCRIPTION REV QTY

DECAL

SIZE NO.
PART LIST

Page 85
 39

Page 86
59 42 40

56
51
10 38

33
57
60
41
54
37
31 36
35
MK-US 35

53
58

44
55
32

46 50
8.1 - ED & Spare Part List

40 43

24 67
25
62
20
A A
30 21 66
45 67
29
64
28
43
27 63
18
26
19
65
23
61
22

13 16 11
17

14

15

1 12
3
4

52 10
48 2 5

8
9

7
49
47 6
 67 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3

MK130E-DPI-115
CONTROLLER
66 MK260E-SVC SOLENOID VALVE COIL 1

MK130E-DPI
MK130E-DPI
DIGITAL
49 65 MK170E-NIP1/4 1 / 4" NIPPLE 2
64 MK170E-T1/4 1 / 4" T CONNECTOR 1
63 MK150E-RDC REDUCTION 3/8" - 1/4" 1
62 MK130E-PWC POWER CABLE 1
SOLENOID VALVE

M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115
61 MK260E-CG11 CABLE GLAND PG11 1
BOLT M6x15
21

60 MK90E-BLT615 1
59 MK60E-CAT CABINET TOP 4
58 MK60E-CBR CABINET RIGHT 1
57 MK90E-CSP CABLE STRAP 1
M-CSR-0050-115-1-60
M-COP-0050-220/230-1-50/60 M-CSR-0050-220-1-50
M-COP-0050-220/230-1-50/60 M-CSR-0050-230-1-60

56 M-FAS-6000 CABINET FASTENER 8

55 CABINET STRIPPING
COMPRESSOR

MK60E-CSG 2
START RELAY

54 M-CHN-6000 CABINET HANDLE (NEW) 4

15

53 MK60E-CLT CABINET LEFT 4

52 MK260E-RNT8 RIVET NUT M8 1
51 MK60E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1
50 MK60E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1
49 SEE.REF TABLE DIGITAL CONTROLLER 1
OVERLOAD PROTECTOR

M-COP-0050-115-1-60

48 MK260E-PCP PLASTIC CONTROL PANEL 1

COMPRESSOR

47 MK60E-COP CONTROLLER PANEL 1

46
14

MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

45 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
44 MK90E-GFD GASKET FOR DRAIN 1
43 MK170E-CHV CHECH VALVE 2
M-CMP-0050-115-1-60 M-CSC-0050-115-1-60
M-CMP-0050-230-1-60 M-CSC-0050-230-1-60
M-CMP-0050-220-1-50 M-CSC-0050-220-1-50

42 M-STU-6000 CABINET STUD AND NUT 8

START CAPASITOR
COMPRESSOR

41 MK60E-BLT48 BOLT M4x8 2

40 MK90E-BLT412 BOLT M4x12 8
13

39 MK60E-CRT CABINET REAR TOP 1

38 MK60E-CAI CABINET INSIDE 1
37 MK60E-CNK2-NPT CONNECTION CIT2 2
36 MK60E-ORG ORİNG 5
35 MK60E-CPG COUPLING CLAMP 5
COMPRESSOR

34 N/A N/A -
11

33 MK60E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1

32 MK60E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
31 MK60E-CNK1 CONNECTION CIT1 1
30 M-HPS-0200 HIGH PRESSURE SWITCH 1
M-FMT-0075-220/230-1-50/60

29 MK90E-TDP ADAPTOR T 1
28 M-FNS-0200 FAN ON/OFF SWITCH 1
M-FMT-0075-115-1-60

27 MK90E-CPT1 CUPPER T1 1
26 M-DRI-0200 DRYER-DEHYDRATOR 1
FAN MOTOR

MK40E-FMT

25 M-BYV-0100 EXPANSION VALVE 1

5

24 MK70E-RTA3 ROTOLOCK ADAPTOR3 1

23 MK260E-ELW2 ELBOW 2 1
22 M-DBV-0200 DRAIN BALL VALVE 1
AIR COOLED
AIR COOLED
AIR COOLED

21 SEE.REF TABLE SOLENOID VALVE 1

COOLING

20 MK60E-RTA2 ROTOLOCK ADAPTOR2 1

19 MK60E-IHE INSULATION OF HEAT EXCHANGER 1
18 MK60E-EXC HEAT EXCHANGER 1
17 MK260E-WHR22 WASHER Ø22xØ8,5x2,5 4
POWER RATINGS

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

16 MK150E-BLT840 BOLT M8x40 4

15 SEE.REF TABLE COMPRESSOR START RELAY 1
14 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
8.1 - ED & Spare Part List

13 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

12 MK40E-CEC COMPRESSOR ELECTRICAL BOX COVER 1
11 SEE.REF TABLE COMPRESSOR 1
DRYER PART NUMBER

10 MK90E-RVT3,5 RIVET Ø3,5 9

9 MK110E-WHR20 WASHER Ø20xØ4,3x1,5 1
MKUS-35
MKUS-35
MKUS-35
MK-US 35

8 MK110E-BLT414 BOLT M4x14mm 1

7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30 4
5 SEE.REF TABLE FAN MOTOR 1
4 M-GRL-0075 FAN GRİLL 1
CAPACITY

35 SCFM
35 SCFM
35 SCFM

3 M-FAN-0075 FAN BLADE 1

2 MK40E-CON CONDANSER 1
1 MK60E-CAB CABINET BASE 1
MK-40 US
MK-40 US
MK-40 US

DWG ITEM
DECAL

PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST

Page 87
 39

Page 88
59 42 40

56
51
10 38

33
57
60
41
54
37
31 36
35
53
58
MK-US 60

44
55
32

46 50
8.1 - ED & Spare Part List

40 43

24 67
25
62
20
A A
30 21 66
45 67
29
64
28
43
27 63
18
26
19
65
23
61
22

13 16 11
17

14

15

12
52 3
4

48 10

2 5

8 9
49
47 7

6
 67 3

MK130E-DPI-115
MK150E-FIT6 1 / 4" - 6mm FITTINGS

CONTROLLER
66 MK260E-SVC SOLENOID VALVE COIL 1

MK130E-DPI
MK130E-DPI
DIGITAL
49
65 MK170E-NIP1/4 1 / 4" NIPPLE 2
64 MK170E-T1/4 1 / 4" T CONNECTOR 1
63 MK150E-RDC REDUCTION 3/8" - 1/4" 1
SOLENOID VALVE 62 MK130E-PWC POWER CABLE 1

M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115
61 MK260E-CG11 CABLE GLAND PG11 1
21

60 MK90E-BLT615 BOLT M6x15 1

59 MK60E-CAT CABINET TOP 4
58 MK60E-CBR CABINET RIGHT 1
57 MK90E-CSP CABLE STRAP 1
M-COP-0035-115-1-60-H M-CSR-0035-115-1-60
MK50E-CSR-220-1-50
MK50E-CSR-230-1-60

56 M-FAS-6000 CABINET FASTENER 8

COMPRESSOR
START RELAY

55 MK60E-CSG CABINET STRIPPING 2

54 M-CHN-6000 CABINET HANDLE (NEW) 4
15

53 MK60E-CLT CABINET LEFT 4

52 MK260E-RNT8 RIVET NUT M8 1
51 MK60E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1
OVERLOAD PROTECTOR

MK50E-COP-220-1-50
MK50E-COP-230-1-60

50 MK60E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1

COMPRESSOR

49 SEE.REF TABLE DIGITAL CONTROLLER 1

48 MK260E-PCP PLASTIC CONTROL PANEL 1
14

47 MK60E-COP CONTROLLER PANEL 1

46 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
45 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
44
M-CMP-0035-115-1-60-H M-CSC-0035-115-1-60

MK90E-GFD
MK50E-CSC-220-1-50

1
MK50E-CSC-230-1-60
START CAPASITOR

GASKET FOR DRAIN

COMPRESSOR

43 MK170E-CHV CHECH VALVE 1

13

42 M-STU-6000 CABINET STUD AND NUT 8

41 MK60E-BLT48 BOLT M4x8 2
40 MK90E-BLT412 BOLT M4x12 8
39 MK60E-CRT CABINET REAR TOP 1
38 MK60E-CAI CABINET INSIDE 1
MK50E-CMP-220-1-50
MK50E-CMP-230-1-60

37 MK60E-CNK2-NPT CONNECTION CIT2 2

36 MK60E-ORG ORİNG 5
COMPRESSOR

35 MK60E-CPG COUPLING CLAMP 5

11

34 N/A N/A -
33 MK60E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
32 MK60E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
M-FMT-0150-115-1-60

31 MK60E-CNK1 CONNECTION CIT1 1

30 M-HPS-0200 HIGH PRESSURE SWITCH 1
FAN MOTOR

29 MK90E-TDP 1
MK110E-FMT

ADAPTOR T
M-FMT-0200

28 M-FNS-0200 FAN ON/OFF SWITCH 1

5

27 MK90E-CPT1 CUPPER T1 1
26 M-DRI-0200 DRYER-DEHYDRATOR 1
25 M-BYV-0100 EXPANSION VALVE 1
AIR COOLED
AIR COOLED
AIR COOLED

24 MK70E-RTA3 ROTOLOCK ADAPTOR3 1

COOLING

23 MK260E-ELW2 ELBOW 2 1
22 M-DBV-0200 DRAIN BALL VALVE 1
21 SEE.REF TABLE SOLENOID VALVE 1
20 MK60E-RTA2 ROTOLOCK ADAPTOR2 1
19 MK60E-IHE INSULATION OF HEAT EXCHANGER 1
POWER RATINGS

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

18 MK60E-EXC HEAT EXCHANGER 1

17 MK260E-WHR22 WASHER Ø22xØ8,5x2,5 4
16 MK150E-BLT840 BOLT M8x40 4
15 SEE.REF TABLE COMPRESSOR START RELAY 1
14 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
DRYER PART NUMBER
8.1 - ED & Spare Part List

13 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

12 MK50E-CEC COMPRESSOR ELECTRICAL BOX COVER 1
MKUS-60
MKUS-60
MKUS-60

11 SEE.REF TABLE COMPRESSOR 1

10 MK90E-RVT3,5 RIVET Ø3,5 9
9 MK110E-WHR20 WASHER Ø20xØ4,3x1,5 1
MK-US 60

8 MK110E-BLT414 BOLT M4x14mm 1

7 MK110E-NT4 NUT M4 4
CAPACITY

60 SCFM
60 SCFM
60 SCFM

6 MK260E-BLT630 BOLT M6x30 4

5 SEE.REF TABLE FAN MOTOR 1
4 M-GRL-0150 FAN GRİLL 1
3 M-FAN-0150 FAN BLADE 1
2 MK60E-CON CONDANSER 1
MK-50 US
MK-50 US
MK-50 US
DECAL

1 MK60E-CAB CABINET BASE 1

DWG ITEM PART NO. DESCRIPTION REV QTY
SIZE NO.
PART LIST

Page 89
 39

Page 90
59 42
40
56
51
10
38

57 33
60

54 41
37
31 36
53 35
58
MK-US 75

44
55
32

46 50
40
8.1 - ED & Spare Part List

43

24 67
62 25

20
A A
30 21 66
45 67
29
64
28
43
27 63
18
26
19
65
61 23
22

13 16 11
17

14

15

12
52 3
4

10
48
2 5

8 9

49
7
47
6
 67 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3

MK130E-DPI -115
66

CONTROLLER
MK260E-SVC SOLENOID VALVE COİL 1

MK130E-DPI
MK130E-DPI
DIGITAL
65 MK170E-NIP1/4 1 / 4" NIPPLE 2

49
64 MK170E-T1/4 1 / 4" T CONNECTOR 1
63 MK150E-RDC REDUCTION 3/8" - 1/4" 1
62 MK130E-PWC POWER CABLE 1
61
SOLENOID VALVE
MK260E-CG11 CABLE GLAND PG11 1
M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115
60 MK90E-BLT615 BOLT M6x15 1
59 MK60E-CAT CABINET TOP 4
21

58 MK60E-CBR CABINET RIGHT 1

57 MK90E-CSP CABLE STRAP 1
56 M-FAS-6000 CABINET FASTENER 8
M-CSR-0075-220-1-50
M-CSR-0075-230-1-60
M-CSR-0075-115-1-60

55 MK60E-CSG CABINET STRIPPING 2

54
COMPRESSOR

4
START RELAY

M-CHN-6000 CABINET HANDLE (NEW)

53 MK60E-CLT CABINET LEFT 4
15

52 MK260E-RNT8 RIVET NUT M8 1

51 MK60E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1
50 MK60E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1
OVERLOAD PROTECTOR

49 SEE.REF TABLE DIGITAL CONTROLLER 1

M-COP-0075-220-1-50
M-COP-0075-230-1-60
M-COP-0075-115-1-60
COMPRESSOR

48 MK260E-PCP PLASTIC CONTROL PANEL 1

47 MK60E-COP CONTROLLER PANEL 1
14

46 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

45 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
44 MK90E-GFD GASKET FOR DRAIN 1
43 MK170E-CHV CHECK VALVE 2
M-CSC-0075-220-1-50
M-CSC-0075-230-1-60
M-CSC-0075-115-1-60
START CAPASITOR

42 M-STU-6000 CABINET STUD AND NUT 8

COMPRESSOR

41 MK60E-BLT48 BOLT M4x8 2

13

40 MK90E-BLT412 BOLT M4x12 8

39 MK60E-CRT CABINET REAR TOP 1
38 MK60E-CAI CABINET INSIDE 1
37 MK60E-CNK2-NPT CONNECTION CIT2 2
M-CMP-0075-220-1-50
M-CMP-0075-230-1-60
M-CMP-0075-115-1-60

36 MK60E-ORG ORİNG 5
35 MK60E-CPG COUPLING CLAMP 5
COMPRESSOR

34 N/A N/A -
11

33 MK60E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1

32 MK60E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
31 MK60E-CNK1 CONNECTION CIT1 1
30 M-HPS-0200 HIGH PRESSURE SWITCH 1
M-FMT-0150-115-1-60

29 MK90E-TDP ADAPTOR T 1
28 M-FNS-0200 FAN ON/OFF SWITCH 1
FAN MOTOR

MK110E-FMT
M-FMT-0200

27 MK90E-CPT1 CUPPER T1 1
26 M-DRI-0200 1
5

DRYER-DEHYDRATOR
25 M-BYV-0100 EXPANSION VALVE 1
24 MK70E-RTA3 ROTOLOCK ADAPTOR3 1
23 MK260E-ELW2 ELBOW 2 1
AIR COOLED
AIR COOLED
AIR COOLED

22 M-DBV-0200 DRAIN BALL VALVE 1

COOLING

21 SEE.REF TABLE SOLENOID VALVE 1

20 MK60E-RTA2 ROTOLOCK ADAPTOR2 1
19 MK60E-IHE INSULATION OF HEAT EXCHANGER 1
18 MK60E-EXC HEAT EXCHANGER 1
POWER RATINGS

17 MK260E-WHR22 WASHER Ø22xØ8,5x2,5 4

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

16 MK150E-BLT840 BOLT M8x40 4

15 SEE.REF TABLE COMPRESSOR START RELAY 1
14 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
8.1 - ED & Spare Part List

13 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

12 MK60E-CEC COMPRESSOR ELECTRICAL BOX COVER 1
DRYER PART NUMBER

11 SEE.REF TABLE COMPRESSOR 1

10 MK90E-RVT3,5 RIVET Ø3,5 9
MKUS-75
MKUS-75
MKUS-75

9 MK110E-WHR20 WASHER Ø20xØ4,3x1,5 1

MK-US 75

8 MK110E-BLT414 BOLT M4x14mm 1

7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30 4
5 SEE.REF TABLE FAN MOTOR 1
CAPACITY

4 M-GRL-0150 1
75 SCFM
75 SCFM
75 SCFM

FAN GRİLL
3 M-FAN-0150 FAN BLADE 1
2 MK60E-CON CONDANSER 1
1 MK60E-CAB CABINET BASE 1
MK-60 US
MK-60 US
MK-60 US

DWG ITEM
DECAL

PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST

Page 91
Page 92
50
69

27 46 10
48
64
66
67 44

70
65 42
61
51
41
62 49 47

28

68 29 A
MK-US 100

63 54 A
43 45
30
8.1 - ED & Spare Part List

52
34 53
71
39 20
40
73
74
38 31
25 74 13 14
59 11
35 20
37 58
36 18 15
72
33 19
32 16

17

8
9

3
12
1 4
2
23

60
24
5
10

56
21

6
57 26
22
10
55
 74 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3

MK130E-DPI-115
73 MK260E-SVC SOLENOID VALVE COIL 1

CONTROLLER
72 MK170E-NIP1/4 2

MK130E-DPI
1 / 4" NIPPLE

MK130E-DPI
DIGITAL
71 MK130E-PWC POWER CABLE 1

57
70 MK260E-CG11 CABLE GLAND PG11 1
69 MK90E-CAT CABINET TOP 1
68 MK90E-BLT615 BOLT M6x15 4

SOLENOID VALVE

M-SLV-0325-230
M-SLV-0325-230
M-SLV-0150-115
67 MK90E-CLT CABINET LEFT 1
66 MK90E-RVT3,5 RIVET Ø3,5 6
31

65 MK90E-CSP CABLE STRAP 6

64 M-FAS-6000 CABINET FASTENER 8
63 MK90E-CSG CABINET STRIPPING 2
62 M-CHN-6000 CABINET HANDLE (NEW) 4
M-CSR-0100-220-1-50

M-CSR-0100-115-1-60
M-CSC-0100-230-1-60 M-CSR-0100-230-1-60

61 MK90E-CBR CABINET RIGHT 1

START RELAY
COMPRESSOR

60 MK260E-RNT8 RIVET NUT M8 4

24

59 MK170E-T1/4 1 / 4" T CONNECTOR 1

58 MK150E-RDC REDUCTION 3/8" - 1/4" 1
57 SEE.REF TABLE DIGITAL CONTROLLER 1
56 MK260E-PCP PLASTIC CONTROL PANEL 1
START CAPASITOR
M-CSC-0100-220-1-50

M-CSC-0100-115-1-60

55 MK90E-COP CONTROLLER PANEL 1

COMPRESSOR

54 MK90E-GFD GASKET FOR DRAIN 1

22

53 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

52 N/A N/A -
51 MK90E-BLT610 BOLT M6x10 8
50 MK90E-CRT CABINET REAR TOP 1
49 CABINET INSIDE 1
OVERLOAD PROTECTOR

MK90E-CAI
M-COP-0100-220-1-50
M-COP-0100-230-1-60
M-COP-0100-115-1-60

48 MK90E-CNK2-NPT CONNECTION CIT2 2

COMPRESSOR

47 MK90E-CPG COUPLING CLAMP 5

46
13

MK90E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1

45 MK90E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1
44 MK90E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
43 MK90E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
M-CEB-0100-115-1-60
M-CEB-0100-230-1-60
M-CEB-0100-220-1-50

42 MK90E-ORG ORİNG 5
ELECTRICAL BOX
COMPRESSOR

41 MK90E-CNK1 CONNECTION CIT1 1

40 M-FNS-0200 FAN ON/OFF SWITCH 1
12

39 M-HPS-0200 HIGH PRESSURE SWITCH 1

38 MK90E-TDP ADAPTOR T 1
37 MK90E-CPT2 CUPPER T2 1
36 M-DRI-0200 DRYER-DEHYDRATOR 1
M-CMP-0100-220-1-50
M-CMP-0100-230-1-60
M-CMP-0100-115-1-60

35 MK70E-EXV EXPANSION VALVE 1

COMPRESSOR

34 MK70E-RTA3 ROTOLOCK ADAPTOR3 1

33 MK260E-ELW2 ELBOW 2 1
11

32 M-DBV-0200 DRAIN BALL VALVE 1

31 SEE.REF TABLE SOLENOID VALVE 1
30 MK110E-RTA2 ROTOLOCK ADAPTOR2 1
M-FMT-0150-115-1-60

29 MK90E-IHE INSULATION OF HEAT EXCHANGER 1

28 MK90E-EXC HEAT EXCHANGER 1
FAN MOTOR

MK110E-FMT

27 M-STU-6000 CABINET STUD AND NUT 8

M-FMT-0200

26 MK90E-RVT4 RIVET Ø4 2
5

25 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1

24 SEE.REF TABLE COMPRESSOR START RELAY 1
23 MK110E-TRM THERMINAL BLOCK 1
AIR COOLED
AIR COOLED
AIR COOLED

22 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

COOLING

21 MK90E-ELBS ELECTRICAL BOX LOWER SUPPORT PLATE 1

20 MK170E-CHV CHECH VALVE 2
19 MK260E-WHR22 WASHER Ø22xØ8,5x2,5 4
18 MK150E-BLT840 BOLT M8x40 4
17 MK90E-CPT1 CUPPER T1 2
POWER RATINGS

220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

16 M-BYV-0100 BY-PASS VALVE 1

15 MK130E-RTA1 ROTOLOCK ADAPTOR1 1
8.1 - ED & Spare Part List

14 MK260E-STC SETTING THE CONNECTION 1

13 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
12 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1
DRYER PART NUMBER

11 SEE.REF TABLE COMPRESSOR 1

MK-US 100

10 MK90E-BLT412 BOLT M4x12 30

MKUS-100
MKUS-100
MKUS-100

9 MK110E-WHR20 WASHER Ø20xØ4,3x1,5 1

8 MK110E-BLT414 BOLT M4x14mm 1
7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30 4
5 SEE.REF TABLE FAN MOTOR 1
CAPACITY

100 SCFM
100 SCFM
100 SCFM

4 M-GRL-0150 FAN GRİLL 1

3 M-FAN-0150 FAN BLADE 1
2 MK70E-CON CONDANSER 1
1 MK90E-CAB CABINET BASE 1
MK-70 US
MK-70 US
MK-70 US
DECAL

DWG ITEM PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST

Page 93
 50

Page 94
69
46 10
27 48

64
44
66
67
70 42
65 51
61 41
49 47
62
28
29 A
68
MK-US 125

A
63 54 43 45
30

34
8.1 - ED & Spare Part List

53
52
71 39 20
40
73
74
38 31
25 74
59
13 14
35 20
58 11
37
36
72
33 18 15
32 19
16

17

8
9

3
1
2 4
12
23
60
5
56 24 10

21 7
57
6
55
26
22
10
 74 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3

MK130E-DPI-115
73 MK260E-SVC SOLENOID VALVE COIL 1

CONTROLLER
72

MK130E-DPI
MK170E-NIP1/4 2

MK130E-DPI
1 / 4" NIPPLE

DIGITAL
57
71 MK130E-PWC POWER CABLE 1
70 MK260E-CG11 CABLE GLAND PG11 1
69 MK90E-CAT CABINET TOP 1
68 MK90E-BLT615 BOLT M6x15 4

SOLENOID VALVE
67 MK90E-CLT 1

M-SLV-0325-230
M-CSR-0150-230-1-60 M-SLV-0325-230
M-CSR-0150-115-1-60 M-SLV-0150-115
CABINET LEFT
66 MK90E-RVT3,5 RIVET Ø3,5 6
31

65 MK90E-CSP CABLE STRAP 6

64 M-FAS-6000 CABINET FASTENER 8
63 MK90E-CSG CABINET STRIPPING 2
M-CSR-0150-220-1-50

62 M-CHN-6000 CABINET HANDLE (NEW) 4

61
START RELAY

MK90E-CBR CABINET RIGHT 1

COMPRESSOR

60 MK260E-RNT8 RIVET NUT M8 4

24

59 MK170E-T1/4 1 / 4" T CONNECTOR 1

58 MK150E-RDC REDUCTION 3/8" - 1/4" 1
57 SEE.REF TABLE DIGITAL CONTROLLER 1
START CAPASITOR
M-CSC-0250-220-1-50
M-CSC-0250-230-1-60
M-CSC-0150-115-1-60

56 MK260E-PCP PLASTIC CONTROL PANEL 1

COMPRESSOR

55 MK90E-COP CONTROLLER PANEL 1

22

54 MK90E-GFD GASKET FOR DRAIN 1

53 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
52 N/A N/A -
51 MK90E-BLT610 BOLT M6x10 8
OVERLOAD PROTECTOR

50 MK90E-CRT CABINET REAR TOP 1

M-COP-0150-220-1-50
M-COP-0150-230-1-60
M-COP-0150-115-1-60

49 CABINET INSIDE 1
COMPRESSOR

MK90E-CAI
48 MK90E-CNK2-NPT CONNECTION CIT2 2
13

47 MK90E-CPG COUPLING CLAMP 5

46 MK90E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1
45 MK90E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1
44 MK90E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
M-CEB-0150-220-1-50

M-CEB-0150-115-1-60
M-CEB-0150-230-1-60
ELECTRICAL BOX

43
COMPRESSOR

MK90E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

42 MK90E-ORG ORİNG 5
12

41 MK90E-CNK1 CONNECTION CIT1 1

40 M-FNS-0200 FAN ON/OFF SWITCH 1
39 M-HPS-0200 HIGH PRESSURE SWITCH 1
38 MK90E-TDP ADAPTOR T 1
M-CMP-0150-220-1-50
M-CMP-0150-230-1-60
M-CMP-0150-115-1-60

37 MK90E-CPT2 CUPPER T2 1
COMPRESSOR

36 M-DRI-0200 DRYER-DEHYDRATOR 1
35 M-EXV-0200 EXPANSION VALVE 1
11

34 N/A N/A -
33 MK260E-ELW2 ELBOW 2 1
32 M-DBV-0200 DRAIN BALL VALVE 1
M-FMT-0150-115-1-60

31 SEE.REF TABLE SOLENOID VALVE 1

30 MK110E-RTA2 ROTOLOCK ADAPTOR2 2
FAN MOTOR

MK110E-FMT
M-FMT-0200

29 MK90E-IHE INSULATION OF HEAT EXCHANGER 1

5

28 MK90E-EXC HEAT EXCHANGER 1

27 M-STU-6000 CABINET STUD AND NUT 8
26 MK90E-RVT4 RIVET Ø4 2
MK110E-FAN-T

25 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1

FAN BLADE

M-FAN-0200

M-FAN-0200

24 SEE.REF TABLE COMPRESSOR START RELAY 1

3

23 MK110E-TRM THERMINAL BLOCK 1

22 SEE.REF TABLE COMPRESSOR START CAPACITOR 1
21 MK90E-ELBS ELECTRICAL BOX LOWER SUPPORT PLATE 1
AIR COOLED
AIR COOLED
AIR COOLED
COOLING

20 MK170E-CHV CHECH VALVE 2

19 MK260E-WHR22 WASHER Ø22xØ8,5x2,5 4
18 MK150E-BLT840 BOLT M8x40 4
17 MK90E-CPT1 CUPPER T1 2
16 M-BYV-0400 1
POWER RATINGS

BY-PASS VALVE
220V/1Ph/50Hz
230V/1Ph/60Hz
115V/1Ph/60Hz

15 MK130E-RTA1 ROTOLOCK ADAPTOR1 1

8.1 - ED & Spare Part List

14 MK260E-STC SETTING THE CONNECTION 1

13 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
12 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1
11 SEE.REF TABLE COMPRESSOR 1
DRYER PART NUMBER
MK-US 125

10 MK90E-BLT412 BOLT M4x12 30

9 MK110E-WHR20 WASHER Ø20xØ4,3x1,5 1
MKUS-125
MKUS-125
MKUS-125

8 MK110E-BLT414 BOLT M4x14mm 1

7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30 4
5 SEE.REF TABLE FAN MOTOR 1
4 M-GRL-0200 FAN GRİLL 1
CAPACITY

125 SCFM
125 SCFM
125 SCFM

3 SEE.REF TABLE FAN BLADE 1

2 MK90E-CON CONDANSER 1
1 MK90E-CAB CABINET BASE 1
MK-80 US
MK-80 US
MK-80 US

DWG ITEM
DECAL

PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST

Page 95
 50

Page 96
69
46 10

27 48

64
44
66
67
42
70
65 51
61 41
49 47
62
28
29 A
MK-US 140

68
A

63 43 45
54
30
8.1 - ED & Spare Part List

34 53
52
71 39 20
40
73
74
38 31
52 74
59
35 20 13 14
37 58 11
36
72
33 18 15
32 19
16
25

17

12
23

8
9
24

3
1
2 4
21

60
5
10
56 26
22
10

57 6

55
 75 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1

M-CSR-0200-220-1-50
M-CSR-0200-230-1-60
74 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3

START RELAY
COMPRESSOR
73 MK260E-SVC SOLENOID VALVE COIL 1
72 MK170E-NIP1/4 1 / 4" NIPPLE 2

24
71 MK130E-PWC POWER CABLE 1
70 MK260E-CG11 CABLE GLAND PG11 1
69 MK90E-CAT CABINET TOP 1
68 MK90E-BLT615 BOLT M6x15 4

START CAPASITOR
M-CSC-0200-220-1-50
M-CSC-0200-230-1-60
COMPRESSOR 67 MK90E-CLT CABINET LEFT 1
66 MK90E-RVT3,5 RIVET Ø3,5 6
22

65 MK90E-CSP CABLE STRAP 6

64 M-FAS-6000 CABINET FASTENER 8
63 MK90E-CSG CABINET STRIPPING 2
62 M-CHN-6000 CABINET HANDLE (NEW) 4
61 MK90E-CBR CABINET RIGHT 1
OVERLOAD PROTECTOR

M-COP-0200-220-1-50
M-COP-0200-230-1-60

60 MK260E-RNT8 RIVET NUT M8 4

59 MK170E-T1/4 1 / 4" T CONNECTOR 1
COMPRESSOR

58 MK150E-RDC REDUCTION 3/8" - 1/4" 1

57 MK130E-DPI 1
13

DIGITAL CONTROLLER
56 MK260E-PCP PLASTIC CONTROL PANEL 1
55 MK90E-COP CONTROLLER PANEL 1
54 MK90E-GFD GASKET FOR DRAIN 1
53 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
M-CMP-0200-220-1-50 M-CEB-0200-220-1-50
M-CMP-0200-230-1-60 M-CEB-0200-230-1-60

52
ELECTRICAL BOX

MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1

COMPRESSOR

51 MK90E-BLT610 BOLT M6x10 8

50 MK90E-CRT CABINET REAR TOP 1
12

49 MK90E-CAI CABINET INSIDE 1

48 MK90E-CNK2-NPT CONNECTION CIT2 2
47 MK90E-CPG COUPLING CLAMP 5
46 MK90E-FIE-Y COMPRESSED AIR FILTER ELEMENT (Y) 1
45 MK90E-FIE-X COMPRESSED AIR FILTER ELEMENT (X) 1
COMPRESSOR

44 MK90E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1

43 MK90E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
42
11

MK90E-ORG ORİNG 5
41 MK90E-CNK1 CONNECTION CIT1 1
40 M-FNS-0200 FAN ON/OFF SWITCH 1
39 M-HPS-0200 HIGH PRESSURE SWITCH 1
38 MK90E-TDP ADAPTOR T 1
FAN MOTOR

MK110E-FMT
M-FMT-0200

37 MK90E-CPT2 CUPPER T2 1
36 M-DRI-0200 DRYER-DEHYDRATOR 1
5

35 M-EXV-0200 EXPANSION VALVE 1

34 MK100E-RTA3 ROTOLOCK ADAPTOR3 1
33 MK260E-ELW2 ELBOW 2 1
MK110E-FAN-T

32 1
FAN BLADE

M-DBV-0200 DRAIN BALL VALVE

M-FAN-0200

31 M-SLV-0325-230 SOLENOID VALVE 1

3

30 MK110E-RTA2 ROTOLOCK ADAPTOR2 1

29 MK90E-IHE INSULATION OF HEAT EXCHANGER 1
28 MK90E-EXC HEAT EXCHANGER 1
27 M-STU-6000 CABINET STUD AND NUT 8
AIR COOLED
AIR COOLED

26 MK90E-RVT4 RIVET Ø4 2
COOLING

25 M-RUN-0200 RUN CAPACITOR 1

24 SEE.REF TABLE COMPRESSOR START RELAY 1
23 MK110E-TRM THERMINAL BLOCK 1
22 SEE.REF TABLE COMPRESSOR START CAPACITOR 1
21 MK90E-ELBS ELECTRICAL BOX LOWER SUPPORT PLATE 1
20 MK170E-CHV CHECH VALVE 2
POWER RATINGS

220V/1Ph/50Hz
230V/1Ph/60Hz

19 MK260E-WHR22 WASHER Ø22xØ8,5x2,5 4

18 MK150E-BLT840 BOLT M8x40 4
17 MK90E-CPT1 CUPPER T1 2
16 M-BYV-0400 BY-PASS VALVE 1
8.1 - ED & Spare Part List

15 MK130E-RTA1 ROTOLOCK ADAPTOR1 1

14 MK260E-STC SETTING THE CONNECTION 1
DRYER PART NUMBER

13 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1

12 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1
11
MK-US 140

SEE.REF TABLE 1
MKUS-140
MKUS-140

COMPRESSOR
10 MK90E-BLT412 BOLT M4x12 30
9 MK110E-WHR20 WASHER Ø20xØ4,3x1,5 1
8 MK110E-BLT414 BOLT M4x14mm 1
7 MK110E-NT4 NUT M4 4
6 MK260E-BLT630 BOLT M6x30 4
CAPACITY

140 SCFM
140 SCFM

5 SEE.REF TABLE FAN MOTOR 1

4 M-GRL-0200 FAN GRİLL 1
3 SEE.REF TABLE FAN BLADE 1
2 MK90E-CON CONDANSER 1
1 MK90E-CAB CABINET BASE 1
MK-90 US
MK-90 US
DECAL

DWG ITEM PART NO. DESCRIPTION REV QTY

SIZE NO.
PART LIST

Page 97
Page 98
83

57
95
53

87
59
90 28
60 30
94
88
64 31 34
36
89
93 52 41
86 51 29 9
92
85 39 33
8.1 - ED & Spare Part List

17
MK-US 175 (1P)

35

32
47 56
45 19
46 41

22 18
100 26 40
100
17

6 17 15 27
21 15
97 91 5
20 11 9
98
96 7
12 14
10
5
23 25
24 48
55
44
102 43
101 49

50
58
6
5
84

99 37

54 6
42 5
2 3
1 38

82 4
 102 MK260E-HPG HIGH PRESSURE GAUGE 1
101 MK260E-LPG LOW PRESSURE GAUGE 1

RUN CAPACITOR
100 MK190E-RMS REMOVABLE SHIELD 4

M-RUN-0200
M-RUN-0200
99 MK260E-CG11 CABLE GLAND PG11 1
98 MK260E-BLT826 BOLT M8x25 24

58
97 M-NUT-6000 CAGE NUTS M6 24
96 M-FAS-6000 CABINET FASTENER 14
95 MK110E-CAT-US CABINET TOP 1
94 MK110E-CRT-US CABINET REAR TOP 1
93 MK110E-CRB-US CABINET REAR BOTTOM 1

M-CSR-0200-220-1-50
M-CSR-0200-230-1-60
92 MK110E-CBL-US CABINET BOTTOM LEFT 1
91

START RELAY
MK110E-CAI CABINET INSIDE 1

COMPRESSOR
90 MK110E-CUL-US CABINET UPPER LEFT 1
89
42
M-CHN-6000 CABINET HANDLE 6
88 MK110E-CNP CONTROLLER PANEL 1
87 MK110E-CUR-US CABINET UPPER RIGHT 1
86 MK110E-CFB-US CABINET FRONT BOTTOM 1
85 MK110E-CLR-US CABINET LOWER RIGHT 1
84 MK110E-CAL3 CABINET LEG3 1
M-CSC-0200-220-1-50
M-CSC-0200-230-1-60
83 2
START CAPACITOR

MK110E-CAL2 CABINET LEG2

82 MK110E-CAL1-US CABINET LEG1 1
COMPRESSOR

81 N/A N/A -
38

80 N/A N/A -
79 N/A N/A -
78 N/A N/A -
77 N/A N/A -
76 N/A N/A -
75 N/A N/A -
74 N/A N/A -
M-CEB-0200-220-1-50
M-CEB-0200-230-1-60
ELECTRICAL BOX
COMPRESSOR

73 N/A N/A -
72 N/A N/A -
71 MK130E-ELP ELECTRICAL PANEL
37

1
70 N/A N/A -
69 N/A N/A -
68 N/A N/A -
67 N/A N/A -
66 N/A N/A -
65 N/A N/A -
SOLENOID VALVE

64 MK130E-MSW MAIN SWITCH 1

M-SLV-0325-230
M-SLV-0325-230

63 N/A N/A -
62 N/A N/A -
26

61 N/A N/A -
60 MK130E-DPI DIGITAL CONTROLLER 1
59 MK130E-PCP PLASTIC CONTROL PANEL 1
58 SEE.REF TABLE RUN CAPACITOR 1
57 MK100E-FIE-Y COMPRESSED AIR FILTER (Y) 1
56 MK100E-FIE-X COMPRESSED AIR FILTER (X) 1
55 M-HPS-0200 HIGH PRESSURE SWICH 1
M-CMP-0200-220-1-50
M-CMP-0200-230-1-60

54 MK110E-TRM THERMINAL BLOCK 1

COMPRESSOR

53 MK170E-BLT815 BOLT M8x15 8

52 M-SPR-0400 SEPERATOR 1
51 MK150E-NT10 NUT M10 1
7

50 MK110E-RCV LIQUID RECEIVER 1

49 MK260E-TDP T ADAPTOR 1
48 M-FNS-0200 FAN ON/OFF SWITCH 1
47 MK120E-FDC FILTER DRIER CLAMP 1
46 M-DRI-0400 DRYER-DEHYDRATOR 1
45 M-EXV-0250 EXPANSION VALVE 1
MK110E-FMT
FAN MOTOR

M-FMT-0325

44 MK130E-DRS-NPT DRAIN SLEEVE 1

43 MK260E-FTT2 FITTING 2 1
3

42 SEE.REF TABLE COMPRESSOR START RELAY 1

41 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
40 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
39 MK170E-ORG ORING 4
MK120E-CON
MK110E-CON

38 SEE.REF TABLE COMPRESSOR START CAPACITOR 1

CONDENSER

37 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1

MK110E-CNK3-US CONNECTION CIT3
2

36 2
35 MK100E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
34 MK100E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
33 MK170E-CPG2 COUPLING CLAMP2 4
32 MK110E-CNK2 CONNECTION CIT2 1
AIR COOLED
AIR COOLED

31 N/A N/A -
COOLING

30 MK110E-CNK1 CONNECTION CIT1 1

29 MK170E-ELW2 ELBOW2 2
28 MK260E-CPG1 COUPLING CLAMP1 3
27 MK260E-SVC SOLENOID VALVE COIL 1
26 SEE.REF TABLE SOLENOID VALVE 1
POWER RATINGS

25 MK260E-DRN DRAIN NUT 1

220V/1Ph/50Hz
230V/1Ph/60Hz

24 M-DBV-0200 DRAIN BALL VALVE 1

23 MK260E-ELW1 ELBOW1 1
22 M-BYV-0400 BY-PASS VALVE 1
21 MK260E-CPT1 CUPPER T1 1
MK-US 175 (1P)
8.1 - ED & Spare Part List

20 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

19 MK260E-RTA2 ROTOLOCK ADAPTOR2 1
18 MK110E-EXC HEAT EXCHANGER 1
DRYER PART NUMBER

17 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3

16 N/A N/A -
15 MK170E-T1/4 1 / 4" T CONNECTOR 2
MKUS-175
MKUS-175

14 MK170E-NIP1/4 1 / 4" NIPPLE 3

13 N/A N/A -
12 MK260E-BLT850 BOLT M8x50 4
11 MK150E-STC SETTING THE CONNECTION 1
10 MK260E-RTA1 ROTOLOCK ADAPTOR1 2
09 MK170E-CHV CHECH VALVE 2
08 N/A N/A -
CAPACITY

07 SEE.REF TABLE COMPRESSOR 1

175 SCFM

175 SCFM

06 MK260E-BLT825 BOLT M8x25 10

05 MK260E-WHR22 WASHER Ø22x8,2x2,4 14
04 MK260E-BLT630 BOLT M6x30 4
03 SEE.REF TABLE FAN MOTOR 1
02 SEE.REF TABLE CONDANSER 1
MK-100 US
MK-100 US

01 MK110E-CAB-US CABINET BASE 1

DECAL

DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 99
 82

Page 100
57
95
53
84

90 87 28
30
94
88
31 34
89 36
93 52 41
MK-US 175

86 51 29 9
92
85 17 39 33
35
8.1 - ED & Spare Part List

32
47 56
45 19
46 41

22 18
100 26 40
100
17

6 17 15 27
21 15
97 91 5
20 11 9
98
96 7
12 14
10
5
23 25
24
44
102 49 43
59
101 64

65
67
50
6
83 60
5

68
66

1
69 70
55
48
81
6 78 72
5
2 3 77 73
76 74
75
4
 102 MK260E-HPG HIGH PRESSURE GAUGE 1
101 MK260E-LPG LOW PRESSURE GAUGE 1
100 MK190E-RMS REMOVABLE SHIELD 4

TRANSFORMER
99 N/A N/A -

MK260E-TRF
M-TRF-1600

M-TRF-1600
98 MK260E-BLT826 BOLT M8x25 24

78
97 M-NUT-6000 CAGE NUTS M6 24
96 M-FAS-6000 CABINET FASTENER 14
95 MK110E-CAT-US CABINET TOP 1
94 MK110E-CRT-US CABINET REAR TOP 1
93 MK110E-CRB-US CABINET REAR BOTTOM 1

CONTACTOR

M-FCN-1200
M-FCN-1200
M-FCN-1200
92 MK110E-CBL-US CABINET BOTTOM LEFT 1

FAN
91 MK110E-CAI CABINET INSIDE

75
1
90 MK110E-CUL-US-T CABINET UPPER LEFT 1
89 M-CHN-6000 CABINET HANDLE 6
88 MK110E-CNP-US CONTROLLER PANEL 1
87 MK110E-CUR-US CABINET UPPER RIGHT 1

M-CNT-0250-230
COMPRESSOR 86 MK110E-CFB-US CABINET FRONT BOTTOM 1
CONTACTOR 85 MK110E-CLR-US CABINET LOWER RIGHT 1

M-CNT-MP
M-CNT-MP
84 MK110E-CAL4-US CABINET LEG4 1
74

83 MK110E-CAL3-US CABINET LEG3 1

82 MK110E-CAL2 CABINET LEG2 1
81 MK110E-CAL1-US CABINET LEG1 1
80 N/A N/A -
OVERLOAD PROTACTOR

79 N/A N/A -
78 SEE.REF TABLE TRANSFORMER 1
COMPRESSOR

77 M-PPR-6000 PHASE PROTECTION RELAY 1

76 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
73

75 SEE.REF TABLE FAN CONTACTOR 1

M-COP-0700
M-COP-0325
M-COP-0325

74 SEE.REF TABLE COMPRESSOR CONTACTOR 1

73 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
72 SEE.REF TABLE FAN OVERLOAD PROTECTOR 1
71 MK130E-ELP ELECTRICAL PANEL 1
70 MK260E-LPS LOW PRESSURE SWICH 1
OVERLOAD PROTACTOR

69 MK260E-HNG HINGE 2
68 MK260E-DLK DOOR LOCK 2
M-FOP-0700-230-3-60

67 MK260E-CG16 CABLE GLAND PG16 8

66 MK260E-SCF SWITCH CONNECTION FITTING 3
FAN
72

65 MK130E-ELB-US ELECTRICAL BOX 1

M-FOP-0700
M-FOP-0700

64 MK130E-MSW MAIN SWITCH 1

63 N/A N/A -
62 N/A N/A -
61 N/A N/A -
60 MK130E-DPI-24 DIGITAL CONTROLLER 1
59 MK130E-PCP PLASTIC CONTROL PANEL 1
SOLENOID VALVE

58 N/A N/A -
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24

57 MK100E-FIE-Y COMPRESSED AIR FILTER (Y) 1

56 MK100E-FIE-X COMPRESSED AIR FILTER (X) 1
26

55 M-HPS-0200 HIGH PRESSURE SWICH 1

54 N/A N/A -
53 MK170E-BLT815 BOLT M8x15 8
52 M-SPR-0400 SEPERATOR 1
51 MK150E-NT10 NUT M10 1
50 MK110E-RCV LIQUID RECEIVER 1
49 MK260E-TDP
M-CMP-0200-230-1-60

T ADAPTOR 1
48 M-FNS-0200 FAN ON/OFF SWITCH 1
COMPRESSOR

47 MK120E-FDC FILTER DRIER CLAMP 1

MK100E-CMP-T
MK100E-CMP-T

46 M-DRI-0400 DRYER-DEHYDRATOR 1
7

45 M-EXV-0250 EXPANSION VALVE 1

44 MK130E-DRS-NPT DRAIN SLEEVE 1
43 MK260E-FTT2 FITTING 2 1
42 N/A N/A -
41 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
40 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60

39 MK170E-ORG ORING 4
38 N/A N/A -
37 N/A N/A -
36 MK110E-CNK3-US CONNECTION CIT3 2
FAN MOTOR

35 MK100E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

34 MK100E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
3

33 MK170E-CPG2 COUPLING CLAMP2 4

32 MK110E-CNK2 CONNECTION CIT2 1
31 N/A N/A -
30 MK110E-CNK1 CONNECTION CIT1 1
29 MK170E-ELW2 ELBOW2 2
AIR COOLED
AIR COOLED
AIR COOLED

28 MK260E-CPG1 COUPLING CLAMP1 3

COOLING

27 MK260E-SVC SOLENOID VALVE COIL 1

26 SEE.REF TABLE SOLENOID VALVE 1
25 MK260E-DRN DRAIN NUT 1
24 M-DBV-0200 DRAIN BALL VALVE 1
23 MK260E-ELW1 ELBOW1 1
POWER RATINGS

230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz

22 M-BYV-0400 BY-PASS VALVE 1

21 MK260E-CPT1 CUPPER T1 1
8.1 - ED & Spare Part List

20 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

19 MK260E-RTA2 ROTOLOCK ADAPTOR2 1
18 MK110E-EXC HEAT EXCHANGER 1
17 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
16 N/A N/A -
DRYER PART NUMBER

15 MK170E-T1/4 1 / 4" T CONNECTOR 2

MK-US 175

14 MK170E-NIP1/4 1 / 4" NIPPLE 3

13 N/A N/A -
MKUS-175
MKUS-175
MKUS-175

12 MK260E-BLT850 BOLT M8x50 4

11 MK150E-STC SETTING THE CONNECTION 1
10 MK260E-RTA1 ROTOLOCK ADAPTOR1 2
09 MK170E-CHV CHECH VALVE 2
08 N/A N/A -
07 SEE.REF TABLE COMPRESSOR 1
06 MK260E-BLT825 BOLT M8x25 10
CAPACITY

MK-100 US 175 SCFM

MK-100 US 175 SCFM
MK-100 US 175 SCFM

05 MK260E-WHR22 WASHER Ø22x8,2x2,4 14

04 MK260E-BLT630 BOLT M6x30 4
03 SEE.REF TABLE FAN MOTOR 1
02 MK120E-CON CONDANSER 1
01 MK110E-CAB-US CABINET BASE 1
DECAL

DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 101
Page 102
83

57
95
53

87
59
90 28
60 30
94
88
64 31 34
36
89
93 52 41
86 51 29 9
92
85 17 39 33
8.1 - ED & Spare Part List
MK-US 200 (1P)

35

32
47 56
45 19
46 41

22 18
100 26 40
100
17

6 17 15 27
21 15
97 91 5
20 11 9
98
96 7
12 14
10
5
23 25
24 48
55
44
102 43
101 49

50
58
6
5
84

99 37

54 6
42 5
2 3
1 38

82 4
 102 MK260E-HPG HIGH PRESSURE GAUGE 1
101 MK260E-LPG LOW PRESSURE GAUGE 1

RUN CAPACITOR
100 MK190E-RMS REMOVABLE SHIELD 4

MK110E-RUN
M-RUN-0250
99 MK260E-CG11 CABLE GLAND PG11 1
98 MK260E-BLT826 BOLT M8x25 24

58
97 M-NUT-6000 CAGE NUTS M6 24
96 M-FAS-6000 CABINET FASTENER 14
95 MK110E-CAT-US CABINET TOP 1
94 MK110E-CRT-US CABINET REAR TOP 1
93 MK110E-CRB-US CABINET REAR BOTTOM 1

M-CSR-0250-230-1-60
92 MK110E-CBL-US CABINET BOTTOM LEFT 1

START RELAY
COMPRESSOR 91 MK110E-CAI CABINET INSIDE 1
90 MK110E-CUL-US CABINET UPPER LEFT 1
MK110E-CSR 89
42

M-CHN-6000 CABINET HANDLE 6

88 MK110E-CNP CONTROLLER PANEL 1
87 MK110E-CUR-US CABINET UPPER RIGHT 1
86 MK110E-CFB-US CABINET FRONT BOTTOM 1
85 MK110E-CLR-US CABINET LOWER RIGHT 1
84 MK110E-CAL3 CABINET LEG3 1
M-CSC-0250-230-1-60
START CAPACITOR

83 MK110E-CAL2 CABINET LEG2 2

82 MK110E-CAL1-US CABINET LEG1 1
COMPRESSOR

81 N/A N/A -
MK110E-CSC
38

80 N/A N/A -
79 N/A N/A -
78 N/A N/A -
77 N/A N/A -
76 N/A N/A -
75 N/A N/A -
74 N/A -
M-CEB-0250-230-1-60

N/A
ELECTRICAL BOX
COMPRESSOR

73 N/A N/A -
72 N/A N/A -
37

71
MK110E-CEB

MK130E-ELP ELECTRICAL PANEL 1

70 N/A N/A -
69 N/A N/A -
68 N/A N/A -
67 N/A N/A -
66 N/A N/A -
65 N/A N/A -
SOLENOID VALVE

64 MK130E-MSW MAIN SWITCH 1

M-SLV-0325-230
M-SLV-0325-230

63 N/A N/A -
62 N/A N/A -
26

61 N/A N/A -
60 MK130E-DPI DIGITAL CONTROLLER 1
59 MK130E-PCP PLASTIC CONTROL PANEL 1
58 SEE.REF TABLE RUN CAPACITOR 1
57 MK130E-FIE-Y COMPRESSED AIR FILTER (Y) 1
56 MK130E-FIE-X COMPRESSED AIR FILTER (X) 1
55 M-HPS-0200 HIGH PRESSURE SWICH 1
M-CMP-0250-230-1-60

54 MK110E-TRM THERMINAL BLOCK 1

COMPRESSOR

53 MK170E-BLT815 BOLT M8x15 8

52 M-SPR-0400 SEPERATOR 1
MK110E-CMP

51 MK150E-NT10 NUT M10 1

7

50 MK110E-RCV LIQUID RECEIVER 1

49 MK260E-TDP T ADAPTOR 1
48 M-FNS-0200 FAN ON/OFF SWITCH 1
47 MK120E-FDC FILTER DRIER CLAMP 1
46 M-DRI-0400 DRYER-DEHYDRATOR 1
45 M-EXV-0250 EXPANSION VALVE 1
MK110E-FMT
FAN MOTOR

M-FMT-0325

44 MK130E-DRS-NPT DRAIN SLEEVE 1

43 MK260E-FTT2 FITTING 2 1
3

42 SEE.REF TABLE COMPRESSOR START RELAY 1

41 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
40 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
39 MK170E-ORG ORING 4
38 SEE.REF TABLE COMPRESSOR START CAPACITOR 1
CONDENSER

MK120E-CON
MK110E-CON

37 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1

36 MK110E-CNK3-US CONNECTION CIT3 2
2

35 MK130E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

34 MK130E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
33 MK170E-CPG2 COUPLING CLAMP2 4
32 MK110E-CNK2 CONNECTION CIT2 1
31 N/A N/A -
AIR COOLED
AIR COOLED
COOLING

30 MK110E-CNK1 CONNECTION CIT1 1

29 MK170E-ELW2 ELBOW2 2
28 MK260E-CPG1 COUPLING CLAMP1 3
27 MK260E-SVC SOLENOID VALVE COIL 1
26 SEE.REF TABLE SOLENOID VALVE 1
25 MK260E-DRN DRAIN NUT 1
POWER RATINGS

220V/1Ph/50Hz
230V/1Ph/60Hz

24 M-DBV-0200 DRAIN BALL VALVE 1

23 MK260E-ELW1 ELBOW1 1
22 M-BYV-0400 BY-PASS VALVE 1
MK-US 200 (1P)

21 MK260E-CPT1 CUPPER T1 1
8.1 - ED & Spare Part List

20 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

19 MK260E-RTA2 ROTOLOCK ADAPTOR2 1
18 MK110E-EXC HEAT EXCHANGER 1
17 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
DRYER PART NUMBER

16 N/A N/A -
15 MK170E-T1/4 1 / 4" T CONNECTOR 2
MKUS-200
MKUS-200

14 MK170E-NIP1/4 1 / 4" NIPPLE 3

13 N/A N/A -
12 MK260E-BLT850 BOLT M8x50 4
11 MK150E-STC SETTING THE CONNECTION 1
10 MK260E-RTA1 ROTOLOCK ADAPTOR1 2
09 MK170E-CHV CHECH VALVE 2
08 N/A N/A -
07 SEE.REF TABLE COMPRESSOR 1
CAPACITY

06 MK260E-BLT825 BOLT M8x25 10

200 SCFM

200 SCFM

05 MK260E-WHR22 WASHER Ø22x8,2x2,4 14

04 MK260E-BLT630 BOLT M6x30 4
03 SEE.REF TABLE FAN MOTOR 1
02 SEE.REF TABLE CONDANSER 1
MK-110 US
MK-110 US

01 MK110E-CAB-US CABINET BASE 1

DECAL

DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 103
 82

Page 104
57
95
53
84

90 87 28
30
94
88
31 34
89 36
93 52 41
86 51
MK-US 200

29 9
92
85 17 39 33
35
8.1 - ED & Spare Part List

32
47 56
45 19
46 41

22 18
100 26 40
100
17

6 17 15 27
21 15
97 91 5
20 11 9
98
96 7
12 14
10
5
23 25
24
44
102 49 43
59
101 64

65
67
50
6
83 60
5

68
66

1
69 70
55
48
81
6 78 72
5
2 3 77 73
76 74
75
4
 102 MK260E-HPG HIGH PRESSURE GAUGE 1

M-TRF-6000-575-3-60
101 MK260E-LPG LOW PRESSURE GAUGE 1
100 MK190E-RMS REMOVABLE SHIELD 4

TRANSFORMER
99 N/A N/A -

MK260E-TRF
98 MK260E-BLT826 BOLT M8x25 24

M-TRF-1600

M-TRF-1600
78
97 M-NUT-6000 CAGE NUTS M6 24
96 M-FAS-6000 CABINET FASTENER 14
95 MK110E-CAT-US CABINET TOP 1
94 MK110E-CRT-US CABINET REAR TOP 1
93 MK110E-CRB-US CABINET REAR BOTTOM 1

CONTACTOR

M-FCN-1200
M-FCN-1200
M-FCN-1200
M-FCN-1200
92 MK110E-CBL-US CABINET BOTTOM LEFT 1
FAN
91 MK110E-CAI CABINET INSIDE 1
75

90 MK110E-CUL-US-T CABINET UPPER LEFT 1

89 M-CHN-6000 CABINET HANDLE 6
88 MK110E-CNP-US CONTROLLER PANEL 1
87 MK110E-CUR-US CABINET UPPER RIGHT 1
M-CNT-0250-230

86 MK110E-CFB-US CABINET FRONT BOTTOM 1

COMPRESSOR
CONTACTOR

85 MK110E-CLR-US CABINET LOWER RIGHT 1

M-CNT-MP
M-CNT-MP
M-CNT-MP
84 MK110E-CAL4-US CABINET LEG4 1
74

83 MK110E-CAL3-US CABINET LEG3 1

82 MK110E-CAL2 CABINET LEG2 1
81 MK110E-CAL1-US CABINET LEG1 1
80 N/A N/A -
OVERLOAD PROTACTOR

79 N/A N/A -
78 SEE.REF TABLE TRANSFORMER 1
77 M-PPR-6000
COMPRESSOR

PHASE PROTECTION RELAY 1

76 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
73

75 SEE.REF TABLE FAN CONTACTOR 1

M-COP-0700
M-COP-0325
M-COP-0325
M-COP-0325

74 SEE.REF TABLE COMPRESSOR CONTACTOR 1

73 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
72 SEE.REF TABLE FAN OVERLOAD PROTECTOR 1
71 MK130E-ELP ELECTRICAL PANEL 1
70 MK260E-LPS LOW PRESSURE SWICH 1
69 MK260E-HNG HINGE 2
OVERLOAD PROTACTOR

68 MK260E-DLK DOOR LOCK 2

67 MK260E-CG16 CABLE GLAND PG16 8
M-FOP-0700-230-3-60

66 MK260E-SCF SWITCH CONNECTION FITTING 3

FAN

65 MK130E-ELB-US ELECTRICAL BOX 1

72

64 MK130E-MSW MAIN SWITCH 1

M-FOP-0700
M-FOP-0700
M-FOP-0700

63 N/A N/A -
62 N/A N/A -
61 N/A N/A -
60 MK130E-DPI-24 DIGITAL CONTROLLER 1
59 MK130E-PCP PLASTIC CONTROL PANEL 1
58 N/A N/A -
SOLENOID VALVE

MK130E-FIE-Y COMPRESSED AIR FILTER (Y)

MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24

57 1
56 MK130E-FIE-X COMPRESSED AIR FILTER (X) 1
55 M-HPS-0200 HIGH PRESSURE SWICH 1
26

54 N/A N/A -
53 MK170E-BLT815 BOLT M8x15 8
52 M-SPR-0400 SEPERATOR 1
51 MK150E-NT10 NUT M10 1
50 MK110E-RCV LIQUID RECEIVER 1
49 MK260E-TDP T ADAPTOR 1
M-CMP-0250-460-3-60
M-CMP-0250-460-3-60
M-CMP-0250-575-3-60
M-CMP-0250-230-3-60

48 M-FNS-0200 FAN ON/OFF SWITCH 1

COMPRESSOR

47 MK120E-FDC FILTER DRIER CLAMP 1

46 M-DRI-0400 DRYER-DEHYDRATOR 1
45 M-EXV-0250 EXPANSION VALVE 1
7

44 MK130E-DRS-NPT DRAIN SLEEVE 1

43 MK260E-FTT2 FITTING 2 1
42 N/A N/A -
41 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
40 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60

39 MK170E-ORG ORING 4
38 N/A N/A -
N/A -
M-FMT-0700-575-3-60

37 N/A
36 MK110E-CNK3-US CONNECTION CIT3 2
FAN MOTOR

35 MK130E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

34 MK130E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
3

33 MK170E-CPG2 COUPLING CLAMP2 4

32 MK110E-CNK2 CONNECTION CIT2 1
31 N/A N/A -
30 MK110E-CNK1 CONNECTION CIT1 1
29 MK170E-ELW2 ELBOW2 2
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED

28 MK260E-CPG1 COUPLING CLAMP1 3

COOLING

27 MK260E-SVC SOLENOID VALVE COIL 1

26 SEE.REF TABLE SOLENOID VALVE 1
25 MK260E-DRN DRAIN NUT 1
24 M-DBV-0200 DRAIN BALL VALVE 1
23 MK260E-ELW1 ELBOW1 1
POWER RATINGS

22 M-BYV-0400 BY-PASS VALVE 1

230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

21 MK260E-CPT1 CUPPER T1 1
8.1 - ED & Spare Part List

20 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

19 MK260E-RTA2 ROTOLOCK ADAPTOR2 1
18 MK110E-EXC HEAT EXCHANGER 1
17 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
16 N/A N/A -
DRYER PART NUMBER
MK-US 200

15 MK170E-T1/4 1 / 4" T CONNECTOR 2

14 MK170E-NIP1/4 1 / 4" NIPPLE 3
13 N/A N/A -
MKUS-200
MKUS-200
MKUS-200
MKUS-200

12 MK260E-BLT850 BOLT M8x50 4

11 MK150E-STC SETTING THE CONNECTION 1
10 MK260E-RTA1 ROTOLOCK ADAPTOR1 2
09 MK170E-CHV CHECH VALVE 2
08 N/A N/A -
07 SEE.REF TABLE COMPRESSOR 1
06 MK260E-BLT825 BOLT M8x25 10
CAPACITY

MK-110 US 200 SCFM

MK-110 US 200 SCFM
MK-110 US 200 SCFM
MK-110 US 200 SCFM

05 MK260E-WHR22 WASHER Ø22x8,2x2,4 14

04 MK260E-BLT630 BOLT M6x30 4
03 SEE.REF TABLE FAN MOTOR 1
02 MK120E-CON CONDANSER 1
01 MK110E-CAB-US CABINET BASE 1
DECAL

DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 105
 83

Page 106
57
95
53

90 87 28
30
94
88
31 34
89 36
93 52 41
86 51 29 9
92
MK-US 250

85 17 39 33
35

32
8.1 - ED & Spare Part List

47 56
45 19
46 41

22 18
100 26 40
100
17

6 17 15 27
21 15
97 91 5
20 11 9
98
96 7
12 14
10
5
23 25
24 49
44
102 43
101

59 50
58 64
6
65
67 5
84

99 37
60

54

42
1 38 68
66

82 69 70
55
48

78 72
6
5 77 73
2 3
76 74
75

4
 102 MK260E-HPG HIGH PRESSURE GAUGE 1
101

M-TRF-6000-575-3-60
MK260E-LPG LOW PRESSURE GAUGE 1
100 MK190E-RMS REMOVABLE SHIELD 4

TRANSFORMER
99 MK260E-CG11

MK260E-TRF
CABLE GLAND PG11 1

M-TRF-1600

M-TRF-1600
N/A
N/A
78
98 MK260E-BLT826 BOLT M8x25 24
97 M-NUT-6000 CAGE NUTS M6 24
96 M-FAS-6000 CABINET FASTENER 14
95 MK130E-CAT-US

CONTACTOR
CABINET TOP 1

M-FCN-1200
M-FCN-1200
M-FCN-1200
M-FCN-1200
FAN
94 MK130E-CRT-US CABINET REAR TOP 1

N/A
N/A
75
93 MK130E-CRB-US CABINET REAR BOTTOM 1
92 MK130E-CBL-US CABINET BOTTOM LEFT 1
91 MK130E-CAI CABINET INSIDE 1

M-CNT-0250-230
COMPRESSOR
90 1
CONTACTOR
MK130E-CUL-US CABINET UPPER LEFT

M-CNT-MP
M-CNT-MP
M-CNT-MP
89 M-CHN-6000 CABINET HANDLE 6
N/A
N/A
74

88 MK130E-CNP-US CONTROLLER PANEL 1

87 MK130E-CUR-US CABINET UPPER RIGHT 1
86 MK130E-CFB-US CABINET FRONT BOTTOM 1
OVERLOAD PROTACTOR

85 MK130E-CLR-US CABINET LOWER RIGHT 1

COMPRESSOR

84 MK130E-CAL3-US CABINET LEG3 1

83 MK130E-CAL2-US CABINET LEG2 2
N/A
N/A
73

M-COP-0700
M-COP-0325
M-COP-0325
M-COP-0325
82 MK130E-CAL1-US CABINET LEG1 1
81 N/A N/A -
80 N/A N/A -
79 N/A N/A -
OVERLOAD PROTACTOR

78 SEE.REF TABLE TRANSFORMER 1

M-FOP-0700-230-3-60

77 M-PPR-6000 PHASE PROTECTION RELAY 1

76 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
FAN
72

N/A
N/A

75 SEE.REF TABLE FAN CONTACTOR 1

M-FOP-0700
M-FOP-0700
M-FOP-0700

74 SEE.REF TABLE COMPRESSOR CONTACTOR 1

73 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
72 SEE.REF TABLE FAN OVERLOAD PROTECTOR 1
71 MK130E-ELP ELECTRICAL PANEL
CONTROLLER

1
MK130E-DPI-24
MK130E-DPI-24
MK130E-DPI-24
MK130E-DPI-24
DIGITAL

70 MK260E-LPS LOW PRESSURE SWICH

MK130E-DPI
MK130E-DPI

1
60

69 MK260E-HNG HINGE 2
68 MK260E-DLK DOOR LOCK 2
67 MK260E-CG16 CABLE GLAND PG16 8
66 MK260E-SCF SWITCH CONNECTION FITTING 3
RUN CAPACITOR

MK115E-RUN
MK115E-RUN

65 MK130E-ELB-US ELECTRICAL BOX 1

MK130E-MSW MAIN SWITCH
58

64 1
N/A
N/A
N/A

N/A

63 N/A N/A -
62 N/A N/A -
61 N/A N/A -
MK115E-CSC-220-1-50 MK115E-CSR-220-1-50
MK115E-CEB-220-1-60 MK115E-CSC-220-1-60 MK115E-CSR-220-1-60

60 SEE.REF TABLE DIGITAL CONTROLLER 1

START RELAY
COMPRESSOR

59 MK130E-PCP PLASTIC CONTROL PANEL 1

N/A
N/A
N/A

N/A
42

58 SEE.REF TABLE RUN CAPACITOR 1

57 MK130E-FIE-Y COMPRESSED AIR FILTER (Y) 1
56 MK130E-FIE-X COMPRESSED AIR FILTER (X) 1
55 M-HPS-0200 HIGH PRESSURE SWICH 1
START CAPACITOR

54 MK110E-TRM THERMINAL BLOCK 1

COMPRESSOR

53 MK170E-BLT815 BOLT M8x15 8

38

52 M-SPR-0400 SEPERATOR
N/A
N/A
N/A

N/A

1
51 MK150E-NT10 NUT M10 1
50 MK130E-RCV LIQUID RECEIVER 1
49 MK260E-TDP T ADAPTOR 1
ELECTRICAL BOX

48 M-FNS-0200 FAN ON/OFF SWITCH 1

COMPRESSOR

47 MK150E-FDC FILTER DRIER CLAMP 1

37

46 M-DRI-0400
N/A
N/A
N/A
N/A

DRYER-DEHYDRATOR 1
45 M-EXV-0250 EXPANSION VALVE 1
44 MK130E-DRS-NPT DRAIN SLEEVE 1
43 MK260E-FTT2 FITTING 2 1
42 SEE.REF TABLE COMPRESSOR START RELAY 1
SOLENOID VALVE

M-SLV-0325-230
M-SLV-0325-230
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24

41 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

40 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
26

39 MK170E-ORG ORING 4
38 SEE.REF TABLE COMPRESSOR START CAPACITOR 1
37 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1
36 MK130E-CNK3-US CONNECTION CIT3 2
MK115E-CMP-220-1-50
MK115E-CMP-220-1-60

MK115E-CMP-460-3-60
MK115E-CMP-460-3-60
M-CMP-0250-230-3-60

M-CMP-0250-575-3-60

35 MK130E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

COMPRESSOR

34 MK130E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1

33 MK170E-CPG2 COUPLING CLAMP2 4
7

32 MK130E-CNK2 CONNECTION CIT2 1

31 MK260E-BLV BALL VALVE 1
30 MK130E-CNK1 CONNECTION CIT1 1
29 MK170E-ELW2 ELBOW2 2
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60

28 MK260E-CPG1 COUPLING CLAMP1 3

M-FMT-0700-575-3-60

27 MK260E-SVC SOLENOID VALVE COIL 1

26 SEE.REF TABLE SOLENOID VALVE 1
FAN MOTOR

25 MK260E-DRN DRAIN NUT 1

M-FMT-0325
M-FMT-0325
3

24 M-DBV-0200 DRAIN BALL VALVE 1

23 MK260E-ELW1 ELBOW1 1
22 M-BYV-0400 BY-PASS VALVE 1
21 MK260E-CPT1 CUPPER T1 1
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
8.1 - ED & Spare Part List

COOLING

20 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

19 MK260E-RTA2 ROTOLOCK ADAPTOR2 1
18 MK170E-EXC HEAT EXCHANGER 1
17 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
16 N/A N/A -
POWER RATINGS

15 MK170E-T1/4 1 / 4" T CONNECTOR 2

MK-US 250

220V/1Ph/50Hz
230V/1Ph/60Hz
230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

14 MK170E-NIP1/4 1 / 4" NIPPLE 3

13 N/A N/A -
12 MK260E-BLT850 BOLT M8x50 4
11 MK150E-STC SETTING THE CONNECTION 1
10 MK260E-RTA1 ROTOLOCK ADAPTOR1 2
DRYER PART NUMBER

09 MK170E-CHV CHECH VALVE 2

08 N/A N/A -
MKUS-250
MKUS-250
MKUS-250
MKUS-250
MKUS-250
MKUS-250

07 SEE.REF TABLE COMPRESSOR 1

06 MK260E-BLT825 BOLT M8x25 10
05 MK260E-WHR22 WASHER Ø22x8,2x2,4 14
04 MK260E-BLT630 BOLT M6x30 4
03 SEE.REF TABLE FAN MOTOR
CAPACITY

1
MK-115 US 250 SCFM
250 SCFM
MK-115 US 250 SCFM
MK-115 US 250 SCFM
MK-115 US 250 SCFM
MK-115 US 250 SCFM

02 MK120E-CON CONDANSER 1
01 MK130E-CAB-US CABINET BASE 1
DWG ITEM
MK-115US

PART NO REV QTY

DECAL

SPARE PART CODE

SIZE NO.
PART LIST

Page 107
 83

Page 108
57
95
53

90 87 28
30
94
88
31 34
89 36
93 52 41
86 51 29 9
92
MK-US 350

85 17 39 33
35

32
8.1 - ED & Spare Part List

47 56
45 19
46 41

22 18
100 26 40
100
17

6 17 15 27
21 15
97 91 5
20 11 9
98
96 7
12 14
10
5
23 25
24 49
44
102 43
101

59 50
58 64
6
65
67 5
84

99 37
60

54

42
1 38 68
66

82 69 70
55
48

78 72
6
5 77 73
2 3
76 74
75

4
 102 MK260E-HPG HIGH PRESSURE GAUGE 1

M-TRF-6000-575-3-60
101 MK260E-LPG LOW PRESSURE GAUGE 1
100 MK190E-RMS REMOVABLE SHIELD 4

TRANSFORMER

MK260E-TRF
99 MK260E-CG11 CABLE GLAND PG11 1

M-TRF-1600

M-TRF-1600
N/A
N/A
78
98 MK260E-BLT826 BOLT M8x25 24
97 M-NUT-6000 CAGE NUTS M6 24
96 M-FAS-6000 CABINET FASTENER 14

CONTACTOR
95 MK130E-CAT-US CABINET TOP 1

M-FCN-1200
M-FCN-1200
M-FCN-1200
M-FCN-1200
FAN
94 MK130E-CRT-US CABINET REAR TOP 1

N/A
N/A
75
93 MK130E-CRB-US CABINET REAR BOTTOM 1
92 MK130E-CBL-US CABINET BOTTOM LEFT 1
91 MK130E-CAI CABINET INSIDE 1

M-CNT-0250-230
COMPRESSOR
90
CONTACTOR
MK130E-CUL-US CABINET UPPER LEFT 1

M-CNT-MP
M-CNT-MP
M-CNT-MP
89 M-CHN-6000 CABINET HANDLE 6
N/A
N/A
74

88 MK130E-CNP-US CONTROLLER PANEL 1

87 MK130E-CUR-US CABINET UPPER RIGHT 1
86 MK130E-CFB-US CABINET FRONT BOTTOM 1
OVERLOAD PROTACTOR

85 MK130E-CLR-US CABINET LOWER RIGHT 1

COMPRESSOR

84 MK130E-CAL3-US CABINET LEG3 1

83 MK130E-CAL2-US CABINET LEG2 2
N/A
N/A
73

M-COP-0700
M-COP-0325
M-COP-0325
M-COP-0325
82 MK130E-CAL1-US CABINET LEG1 1
81 N/A N/A -
80 N/A N/A -
79 N/A N/A -
OVERLOAD PROTACTOR

78 SEE.REF TABLE TRANSFORMER 1

M-FOP-0700-230-3-60

77 M-PPR-6000 PHASE PROTECTION RELAY 1

76 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
FAN
72

N/A
N/A

75 SEE.REF TABLE FAN CONTACTOR 1

M-FOP-0700
M-FOP-0700
M-FOP-0700

74 SEE.REF TABLE COMPRESSOR CONTACTOR 1

73 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
72 SEE.REF TABLE FAN OVERLOAD PROTECTOR 1
71 MK130E-ELP ELECTRICAL PANEL 1
CONTROLLER

MK130E-DPI-24
MK130E-DPI-24
MK130E-DPI-24
MK130E-DPI-24
DIGITAL

70 MK260E-LPS LOW PRESSURE SWICH

MK130E-DPI
MK130E-DPI

1
60

69 MK260E-HNG HINGE 2
68 MK260E-DLK DOOR LOCK 2
67 MK260E-CG16 CABLE GLAND PG16 8
66 MK260E-SCF SWITCH CONNECTION FITTING 3
RUN CAPACITOR

65 MK130E-ELB-US ELECTRICAL BOX 1

M-RUN-0250
M-RUN-0250

64 MK130E-MSW MAIN SWITCH 1

58

N/A
N/A
N/A
N/A

63 N/A N/A -
62 N/A N/A -
61 N/A N/A -
M-CSR-0250-220-1-50
M-CSR-0250-230-1-60

60 SEE.REF TABLE DIGITAL CONTROLLER 1

START RELAY
COMPRESSOR

59 MK130E-PCP PLASTIC CONTROL PANEL 1

N/A
N/A
N/A
N/A

58 SEE.REF TABLE 1
42

RUN CAPACITOR
57 MK130E-FIE-Y COMPRESSED AIR FILTER (Y) 1
56 MK130E-FIE-X COMPRESSED AIR FILTER (X) 1
55 M-HPS-0200 HIGH PRESSURE SWICH 1
M-CSC-0250-220-1-50
M-CSC-0250-230-1-60
START CAPACITOR

54 MK110E-TRM THERMINAL BLOCK 1

COMPRESSOR

53 MK170E-BLT815 BOLT M8x15 8

38

52 M-SPR-0400 SEPERATOR 1
N/A
N/A
N/A
N/A

51 MK150E-NT10 NUT M10 1

50 MK130E-RCV LIQUID RECEIVER 1
49 MK260E-TDP T ADAPTOR 1
48
M-CEB-0250-220-1-50
M-CEB-0250-230-1-60

M-FNS-0200
ELECTRICAL BOX

FAN ON/OFF SWITCH 1

COMPRESSOR

47 MK150E-FDC FILTER DRIER CLAMP 1

37

46 M-DRI-0400 DRYER-DEHYDRATOR 1
N/A
N/A
N/A
N/A

45 M-EXV-0250 EXPANSION VALVE 1

44 MK130E-DRS-NPT DRAIN SLEEVE 1
43 MK260E-FTT2 FITTING 2 1
42 SEE.REF TABLE COMPRESSOR START RELAY 1
SOLENOID VALVE

M-SLV-0325-230
M-SLV-0325-230
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24

41 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

40 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
26

39 MK170E-ORG ORING 4
38 SEE.REF TABLE COMPRESSOR START CAPACITOR 1
37 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1
36 MK130E-CNK3-US CONNECTION CIT3 2
M-CMP-0250-220-1-50
M-CMP-0250-230-1-60
M-CMP-0250-230-3-60
M-CMP-0250-460-3-60
M-CMP-0250-460-3-60
M-CMP-0250-575-3-60

35 MK130E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

COMPRESSOR

34 MK130E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1

33 MK170E-CPG2 COUPLING CLAMP2 4
7

32 MK130E-CNK2 CONNECTION CIT2 1

31 MK260E-BLV BALL VALVE 1
30 MK130E-CNK1 CONNECTION CIT1 1
29 MK170E-ELW2 ELBOW2 2
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60

28 MK260E-CPG1 COUPLING CLAMP1 3

27 MK260E-SVC SOLENOID VALVE COIL 1
M-FMT-0700-575-3-60

26 SEE.REF TABLE SOLENOID VALVE 1

FAN MOTOR

25 MK260E-DRN DRAIN NUT 1

M-FMT-0325
M-FMT-0325
3

24 M-DBV-0200 DRAIN BALL VALVE 1

23 MK260E-ELW1 ELBOW1 1
22 M-BYV-0400 BY-PASS VALVE 1
21 MK260E-CPT1 CUPPER T1 1
8.1 - ED & Spare Part List

AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED

20 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

COOLING

19 MK260E-RTA2 ROTOLOCK ADAPTOR2 1

18 MK170E-EXC HEAT EXCHANGER 1
17 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
16 N/A N/A -
POWER RATINGS

15 MK170E-T1/4 1 / 4" T CONNECTOR 2

MK-US 350

220V/1Ph/50Hz
230V/1Ph/60Hz
230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

14 MK170E-NIP1/4 1 / 4" NIPPLE 3

13 N/A N/A -
12 MK260E-BLT850 BOLT M8x50 4
11 MK150E-STC SETTING THE CONNECTION 1
10 MK260E-RTA1 ROTOLOCK ADAPTOR1 2
DRYER PART NUMBER

09 MK170E-CHV CHECH VALVE 2

08 N/A N/A -
MKUS-350
MKUS-350
MKUS-350
MKUS-350
MKUS-350
MKUS-350

07 SEE.REF TABLE COMPRESSOR 1

06 MK260E-BLT825 BOLT M8x25 10
05 MK260E-WHR22 WASHER Ø22x8,2x2,4 14
04 MK260E-BLT630 BOLT M6x30 4
03 SEE.REF TABLE FAN MOTOR 1
CAPACITY

MK-120 US 350 SCFM

MK-120 US 350 SCFM
MK-120 US 350 SCFM
MK-120 US 350 SCFM
MK-120 US 350 SCFM
MK-120 US 350 SCFM

02 MK120E-CON CONDANSER 1
01 MK130E-CAB-US CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
DECAL

SIZE NO.
PART LIST

Page 109
Page 110
83

57
95
53

90 87 28
30
94
88
31 34
89 36
93 52 41
86 51 29 9
MK-US 425

92
85 17 39 33
35

32
8.1 - ED & Spare Part List

47 56
45 19
46 41

22 18
100 26 40
100
17

6 17 15 27
21 15
97 91 5
20 11 9
98
96 7
12 14
10
5
23 25
24 49
44
102 43
101

59 50
58 64
6
65
67 5
84

99 37
60

54

42
1 38 68
66

82 69 70
55
48

78 72
6
5 77 73
2 3
76 74
75

4
 102 MK260E-HPG HIGH PRESSURE GAUGE 1
101

M-TRF-6000-575-3-60
MK260E-LPG LOW PRESSURE GAUGE 1
100 MK190E-RMS REMOVABLE SHIELD 4

TRANSFORMER

MK260E-TRF
99 MK260E-CG11 CABLE GLAND PG11 1

M-TRF-1600

M-TRF-1600
N/A
N/A
78
98 MK260E-BLT826 BOLT M8x25 24
97 M-NUT-6000 CAGE NUTS M6 24
96 M-FAS-6000 CABINET FASTENER 14

CONTACTOR
95 MK130E-CAT-US CABINET TOP 1

M-FCN-1200
M-FCN-1200
M-FCN-1200
M-FCN-1200
FAN
94 MK130E-CRT-US CABINET REAR TOP 1

N/A
N/A
75
93 MK130E-CRB-US CABINET REAR BOTTOM 1
92 MK130E-CBL-US CABINET BOTTOM LEFT 1
91 MK130E-CAI CABINET INSIDE 1

M-CNT-0250-230
COMPRESSOR
90
CONTACTOR
MK130E-CUL-US CABINET UPPER LEFT 1

M-CNT-MP
M-CNT-MP
M-CNT-MP
89 M-CHN-6000 CABINET HANDLE 6
N/A
N/A
74

88 MK130E-CNP-US CONTROLLER PANEL 1

87 MK130E-CUR-US CABINET UPPER RIGHT 1
86 MK130E-CFB-US CABINET FRONT BOTTOM 1
OVERLOAD PROTACTOR

85 MK130E-CLR-US CABINET LOWER RIGHT 1

COMPRESSOR

84 MK130E-CAL3-US CABINET LEG3 1

83 MK130E-CAL2-US CABINET LEG2 2
N/A
N/A
73

M-COP-0325
M-COP-0325
M-COP-0325
M-COP-0700

82 MK130E-CAL1-US CABINET LEG1 1

81 N/A N/A -
80 N/A N/A -
79 N/A N/A -
OVERLOAD PROTACTOR

78 SEE.REF TABLE TRANSFORMER 1

77 M-PPR-6000
M-FOP-0700-230-3-60

PHASE PROTECTION RELAY 1

76 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
FAN
72

N/A
N/A

75 SEE.REF TABLE FAN CONTACTOR 1

M-FOP-0700
M-FOP-0700
M-FOP-0700

74 SEE.REF TABLE COMPRESSOR CONTACTOR 1

73 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
72 SEE.REF TABLE FAN OVERLOAD PROTECTOR 1
71 MK130E-ELP ELECTRICAL PANEL 1
MK130E-DPI-24
MK130E-DPI-24
MK130E-DPI-24
MK130E-DPI-24
CONTROLLER
MK130E-DPI
MK130E-DPI

70 MK260E-LPS LOW PRESSURE SWICH 1

DIGITAL
60

69 MK260E-HNG HINGE 2
68 MK260E-DLK DOOR LOCK 2
67 MK260E-CG16 CABLE GLAND PG16 8
66 MK260E-SCF SWITCH CONNECTION FITTING 3
RUN CAPACITOR

65 MK130E-ELB-US ELECTRICAL BOX 1

M-RUN-0325
M-RUN-0325

64 MK130E-MSW MAIN SWITCH

58

1
N/A
N/A
N/A
N/A

63 N/A N/A -
62 N/A N/A -
61 N/A N/A -
M-CSR-0325-220-1-50
M-CSR-0325-230-1-60

60 SEE.REF TABLE DIGITAL CONTROLLER 1

START RELAY
COMPRESSOR

59 MK130E-PCP PLASTIC CONTROL PANEL 1

N/A
N/A
N/A
N/A

58 SEE.REF TABLE
42

RUN CAPACITOR 1
57 MK130E-FIE-Y COMPRESSED AIR FILTER (Y) 1
56 MK130E-FIE-X COMPRESSED AIR FILTER (X) 1
55 M-HPS-0200 HIGH PRESSURE SWICH 1
M-CSC-0325-220-1-50
M-CSC-0325-230-1-60
START CAPACITOR

54 MK110E-TRM THERMINAL BLOCK 1

COMPRESSOR

53 MK170E-BLT815 BOLT M8x15 8

38

52 M-SPR-0400 SEPERATOR 1
N/A
N/A
N/A
N/A

51 MK150E-NT10 NUT M10 1

50 MK130E-RCV LIQUID RECEIVER 1
49 MK260E-TDP T ADAPTOR 1
48
M-CEB-0325-220-1-50
M-CEB-0325-230-1-60

M-FNS-0200 FAN ON/OFF SWITCH

ELECTRICAL BOX

1
COMPRESSOR

47 MK150E-FDC FILTER DRIER CLAMP 1

37

46 M-DRI-0400 DRYER-DEHYDRATOR 1
N/A
N/A
N/A
N/A

45 M-EXV-0500 EXPANSION VALVE 1

44 MK130E-DRS-NPT DRAIN SLEEVE 1
43 MK260E-FTT2 FITTING 2 1
42 SEE.REF TABLE COMPRESSOR START RELAY 1
SOLENOID VALVE

M-SLV-0325-230
M-SLV-0325-230
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24
MK150E-SLV-24

41 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

40 MK170E-EWF 90* 1 / 4" - 6mm ELBOW 1
26

39 MK170E-ORG ORING 4
38 SEE.REF TABLE COMPRESSOR START CAPACITOR 1
37 SEE.REF TABLE COMPRESSOR ELECTRICAL BOX 1
36 MK130E-CNK3-US CONNECTION CIT3 2
M-CMP-0325-220-1-50
M-CMP-0325-230-1-60
M-CMP-0325-230-3-60
M-CMP-0325-460-3-60
M-CMP-0325-460-3-60
M-CMP-0325-575-3-60

35 MK130E-ELK-X COMPRESSED AIR FILTER KIT (X) 1

COMPRESSOR

34 MK130E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1

33 MK170E-CPG2 COUPLING CLAMP2 4
7

32 MK130E-CNK2 CONNECTION CIT2 1

31 MK260E-BLV BALL VALVE 1
30 MK130E-CNK1 CONNECTION CIT1 1
29 MK170E-ELW2 ELBOW2 2
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60

28 MK260E-CPG1 COUPLING CLAMP1 3

27 MK260E-SVC SOLENOID VALVE COIL 1
M-FMT-0700-575-3-60

26 SEE.REF TABLE SOLENOID VALVE 1

FAN MOTOR

25 MK260E-DRN DRAIN NUT 1

M-FMT-0325
M-FMT-0325
3

24 M-DBV-0200 DRAIN BALL VALVE 1

23 MK260E-ELW1 ELBOW1 1
22 M-BYV-0400 BY-PASS VALVE 1
21 MK260E-CPT1 CUPPER T1 1
8.1 - ED & Spare Part List

AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED

20 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

COOLING

19 MK260E-RTA2 ROTOLOCK ADAPTOR2 1

18 MK170E-EXC HEAT EXCHANGER 1
17 MK150E-FIT6 1 / 4" - 6mm FITTINGS 3
16 N/A N/A -
15 MK170E-T1/4 1 / 4" T CONNECTOR 2
POWER RATINGS
MK-US 425

220V/1Ph/50Hz
230V/1Ph/60Hz
230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

14 MK170E-NIP1/4 1 / 4" NIPPLE 3

13 N/A N/A -
12 MK260E-BLT850 BOLT M8x50 4
11 MK260E-STC SETTING THE CONNECTION 1
10 MK260E-RTA1 ROTOLOCK ADAPTOR1 2
DRYER PART NUMBER

09 MK170E-CHV CHECH VALVE 2

08 N/A N/A -
MKUS-425
MKUS-425
MKUS-425
MKUS-425
MKUS-425
MKUS-425

07 SEE.REF TABLE COMPRESSOR 1

06 MK260E-BLT825 BOLT M8x25 10
05 MK260E-WHR22 WASHER Ø22x8,2x2,4 14
04 MK260E-BLT630 BOLT M6x30 4
03 SEE.REF TABLE FAN MOTOR 1
CAPACITY

425 SCFM
425 SCFM
425 SCFM
425 SCFM
425 SCFM
425 SCFM

02 MK130E-CON CONDANSER 1
01 MK130E-CAB-US CABINET BASE 1
DWG ITEM
MK-130 US
MK-130 US
MK-130 US
MK-130 US
MK-130 US
MK-130 US

PART NO SPARE PART CODE REV QTY

DECAL

SIZE NO.
PART LIST

Page 111
 75 84

Page 112
85
86
92

87
4

89
79
81

41 42
90 83
43

78
82 39
MK-US 550

77 40
80

45
47
33
8.1 - ED & Spare Part List

68
52
67
51
88 76 88
32 38
50
48
46 31 44

49
60 30 34
61
53
62

59 9
24 68

44
54 23 91
58
57 93 55 26
56 5 71
25 44 66
72 6
73 27
37
20 67
21
5 65

28 36
74 29
22
63 35
64

69 18
44

17

16

6 15
14 70
5
12 10
2
19 13
7
3 20
11
5
5
8
1
4
 92 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
92 MK150E-FIE-Y COMPRESSED AIR FILTER (Y) 1

M-TRF-6000-575-3-60
91 MK150E-FIE-X COMPRESSED AIR FILTER (X) 1

TRANSFORMER
90 MK260E-HPG HIGH PRESSURE GAUGE 1
89 MK260E-LPG LOW PRESSURE GAUGE 1

MK260E-TRF
M-TRF-1600

M-TRF-1600
59
88 MK190E-RMS REMOVABL"E SHIELD 4
87 M-NUT-6000 CAGE NUT 26
86 M-FAS-6000 CABINET FASTENER 14
85 M-STU-6000 CABINET STUD AND NUT 14
84 MK150E-CAT CABINET TOP 1

CONTACTOR
M-FCN-1200
M-FCN-1200
M-FCN-1200
M-FCN-1200
83 M-CHN-6000 CABINET HANDLE 1
FAN 82 MK150E-CRB CABINET REAR BOTTOM 1
56
81 MK150E-CRT CABINET REAR TOP 1
80 MK150E-CLR CABINET LOWER RIGHT 1
79 MK150E-CUR CABINET UPPER RIGHT 1
78 MK150E-CFB CABINET FRONT BOTTOM 1
COMPRESSOR
CONTACTOR

77 MK150E-CBL CABINET BOTTOM LEFT 1

M-CNT-1200
M-CNT-1200
M-CNT-1200
M-CNT-1600

76 MK150E-CAL3 CABINET LEG3 1

55

75 MK150E-CAL2 CABINET LEG2 2

74 MK150E-CAL1 CABINET LEG1 1
73 MK150E-CAI CABINET INSIDE 1
72 MK150E-CUL-US CABINET UPPER LEFT 1
OVERLOAD PROTACTOR

71 MK170E-EWF ELBOW FITTINGS 2

70 MK150E-RTA2 ROTOLOCK ADAPTOR2 1
COMPRESSOR

69 MK150E-DRS-NPT DRAIN SLEEVE 1

M-COP-0700-575

68 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

54

MK150E-COP
MK150E-COP

67 MK170E-CHV CHECK VALVE 2

M-COP-1600

66 MK150E-SLV-24 SOLENOID VALVE 1

65 MK260E-SVC SOLENOID VALVE COIL 1
64 M-DBV-6000 DRAIN BALL VALVE 1
63 MK260E-ELW2 ELBOW2 1
62 M-FNS-0200 FAN ON/OFF SWITCH 1
OVERLOAD PROTACTOR

61 M-HPS-0200 HIGH PRESSURE SWITCH 1

60 MK260E-LPS LOW PRESSURE SWICH 1
M-FOP-0700-230-3-60

59 SEE.REF TABLE TRANSFORMER 1

58 M-PPR-6000 PHASE PROTECTION RELAY 1
FAN
9

57 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4

M-FOP-0700
M-FOP-0700
M-FOP-0700

56 SEE.REF TABLE FAN CONTACTOR 2

55 SEE.REF TABLE COMPRESSOR CONTACTOR 1
54 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
53 MK150E-ELP ELECTRICAL PANEL 1
52 MK260E-ES2 ESD3 CONTROLLER 1
MK140E-CMP-230-3-60

51 MK260E-MSW MAIN SWITCH 1

M-CMP-0500-575-3-60

50 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1

COMPRESSOR

49 MK260E-HNG HINGE 2
MK140E-CMP
MK140E-CMP

48 MK260E-DLK DOOR LOCK 2

47
7

M-CCP-6000 CONDUIT FOR CONTROL PANEL 8

46 MK260E-SCF SWITCH CONNECTION FITTING 3
45 MK150E-ELB-US ELECTRICAL BOX 1
44 MK150E-FIT6 1 / 4" - 6mm FITTINGS 4
43 MK260E-BLV BALL VALVE 1
42 MK170E-BLT815 BOLT M8x15 8
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60

41 MK170E-CNK2-NPT CONNECTION CIT2 2

40 MK170E-CPG2 COUPLING CLAMP 2 4
M-FMT-0700-575-3-60

39 MK260E-CPG1 COUPLING CLAMP 1 6

38 MK170E-ORG ORING 1
FAN MOTOR

37 MK170E-T1/4 1 / 4" T CONNECTOR 1

2
3

36 MK170E-NIP1/4 1 / 4" NIPPLE

35 MK260E-DRN DRAIN NUT 1
34 MK150E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
33 MK150E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
32 MK150E-CPP COUPLING PIPE 2
31 MK170E-ELW1 ELBOW1 2
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED

30 MK150E-CNK1 CONNECTION CIT1 2

COOLING

29 M-CLP-1200 CLAMP 1
28 M-DRI-0400 DRYER-DEHYDRATOR 1
27 M-EXV-1000 EXPANSION VALVE 1
26 MK150E-SSD SENSOR ADAPTOR 1
25 MK260E-RTA3 ROTOLOCK ADAPTOR3 1
24 M-RTA-5000-1 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 1
POWER RATINGS

23 MK260E-EXC HEAT EXCHANGER 1

230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

22 MK150E-NT10 NUT M10 1

21 M-SPR-0850 SEPARATOR 1
20 MK260E-BLT830 BOLT M8x30 6
19 MK150E-RCV LIQUID RECEIVER 1
8.1 - ED & Spare Part List

18 MK260E-CPT2 CUPPER T2 1
17 M-BYV-1200 BY-PASS VALVE 1
16 MK260E-CPT1 CUPPER T1 2
DRYER PART NUMBER

15 MK260E-STC SETTING THE CONNECTION 1

14 MK260E-CTC2 CAPPILARY TUBE CONNECTION2 2
MK-US 550

13 MK260E-CTC1 CAPPILARY TUBE CONNECTION1 1

MKUS-550
MKUS-550
MKUS-550
MKUS-550

12 M-TSC-6000 T CONNECTION FOR SWITCH CAPILLARY 1

11 MK260E-BLT850 BOLT M8x50 4
10 MK160E-RTA1 ROTOLOCK ADAPTOR1 1
09 SEE.REF TABLE FAN OVERLOAD PROTECTOR 2
08 MK150E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
07 SEE.REF TABLE COMPRESSOR 1
MK150E-BLT825 BOLT M8x25 13
CAPACITY

06
MK-140 US 550 SCFM
MK-140 US 550 SCFM
MK-140 US 550 SCFM
MK-140 US 550 SCFM

05 MK260E-WHR22 WASHER 22x8,2x2,4 23

04 MK260E-BLT630 BOLT M6x30 30
03 SEE.REF TABLE FAN MOTOR 2
02 MK140E-CON CONDANSER 1
01 MK150E-CAB CABINET BASE 1
DECAL

DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 113
 75 84

Page 114
85
86
92

87
4

89
79
81

41 42
90 83
43

78
82 39
MK-US 700

77 40
80

45
47
33
8.1 - ED & Spare Part List

68
52
67
51
88 76 88
32 38
50
48
46 31 44

49
60 30 34
61
53
62

59 9
24 68

44
54 23 91
58
57 93 55 26
56 5 71
25 44 66
72 6
73 27
37
20 67
21
5 65

28 36
74 29
22
63 35
64

69 18
44

17

16

6 15
14 70
5
12 10
2
19 13
7
3 20
11
5
5
8
1
4
 92 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
92 MK150E-FIE-Y COMPRESSED AIR FILTER (Y) 1

M-TRF-6000-575-3-60
91 MK150E-FIE-X COMPRESSED AIR FILTER (X) 1

TRANSFORMER
90 MK260E-HPG HIGH PRESSURE GAUGE 1
89 MK260E-LPG LOW PRESSURE GAUGE 1

MK260E-TRF
M-TRF-1600

M-TRF-1600
59
88 MK190E-RMS REMOVABLE SHIELD 4
87 M-NUT-6000 CAGE NUT 26
86 M-FAS-6000 CABINET FASTENER 14
85 M-STU-6000 CABINET STUD AND NUT 14
84 MK150E-CAT CABINET TOP 1

CONTACTOR
83

M-FCN-1200
M-FCN-1200
M-FCN-1200
M-FCN-1200
M-CHN-6000 CABINET HANDLE 1
FAN 82 MK150E-CRB CABINET REAR BOTTOM 1
56

81 MK150E-CRT CABINET REAR TOP 1

80 MK150E-CLR CABINET LOWER RIGHT 1
79 MK150E-CUR CABINET UPPER RIGHT 1
78 MK150E-CFB CABINET FRONT BOTTOM 1
COMPRESSOR
CONTACTOR

77 MK150E-CBL CABINET BOTTOM LEFT 1

M-CNT-1200
M-CNT-1200
M-CNT-1200
M-CNT-1600

76 MK150E-CAL3 CABINET LEG3 1

55

75 MK150E-CAL2 CABINET LEG2 2

74 MK150E-CAL1 CABINET LEG1 1
73 MK150E-CAI CABINET INSIDE 1
72 MK150E-CUL-US CABINET UPPER LEFT 1
OVERLOAD PROTACTOR

71 MK170E-EWF ELBOW FITTINGS 2

70 MK150E-RTA2 ROTOLOCK ADAPTOR2 1
COMPRESSOR

69 MK150E-DRS-NPT DRAIN SLEEVE 1

M-COP-0700-575

68 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2

54

MK150E-COP
MK150E-COP

67 MK170E-CHV CHECK VALVE 2

M-COP-1600

66 MK150E-SLV-24 SOLENOID VALVE 1

65 MK260E-SVC SOLENOID VALVE COIL 1
64 M-DBV-6000 DRAIN BALL VALVE 1
63 MK260E-ELW2 ELBOW2 1
62 M-FNS-0200 FAN ON/OFF SWITCH 1
OVERLOAD PROTACTOR

61 M-HPS-0200 HIGH PRESSURE SWITCH 1

60 MK260E-LPS LOW PRESSURE SWICH 1
M-FOP-0700-230-3-60

59 SEE.REF TABLE TRANSFORMER 1

58 M-PPR-6000 PHASE PROTECTION RELAY 1
FAN

M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4

9

57
M-FOP-0700
M-FOP-0700
M-FOP-0700

56 SEE.REF TABLE FAN CONTACTOR 2

55 SEE.REF TABLE COMPRESSOR CONTACTOR 1
54 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTOR 1
53 MK150E-ELP ELECTRICAL PANEL 1
52 MK260E-DCC-24 ADVANCED DIGITAL CONTROLLER 1
51 MK260E-MSW MAIN SWITCH 1
M-CMP-0500-230-3-60
M-CMP-0500-460-3-60
M-CMP-0500-460-3-60
M-CMP-0500-575-3-60

50 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1

COMPRESSOR

49 MK260E-HNG HINGE 2
48 MK260E-DLK DOOR LOCK 2
47 M-CCP-6000 CONDUIT FOR CONTROL PANEL 8
7

46 MK260E-SCF SWITCH CONNECTION FITTING 3

45 MK150E-ELB-US ELECTRICAL BOX 1
44 MK150E-FIT6 1 / 4" - 6mm FITTINGS 4
43 MK260E-BLV BALL VALVE 1
42 MK170E-BLT815 BOLT M8x15 8
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60
M-FMT-0700-400/460-3-50/60

41 MK170E-CNK2-NPT CONNECTION CIT2 2

40 MK170E-CPG2 COUPLING CLAMP 2 4
M-FMT-0700-575-3-60

39 MK260E-CPG1 COUPLING CLAMP 1 6

38 MK170E-ORG ORING 1
FAN MOTOR

37 MK170E-T1/4 1 / 4" T CONNECTOR 1

36 MK170E-NIP1/4 1 / 4" NIPPLE 2
3

35 MK260E-DRN DRAIN NUT 1

34 MK150E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
33 MK150E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
32 MK150E-CPP COUPLING PIPE 2
31 MK170E-ELW1 ELBOW1 2
30 MK150E-CNK1 CONNECTION CIT1 2
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
COOLING

29 M-CLP-1200 CLAMP 1
28 M-DRI-0400 DRYER-DEHYDRATOR 1
27 M-EXV-1000 EXPANSION VALVE 1
26 MK150E-SSD SENSOR ADAPTOR 1
25 MK260E-RTA3 ROTOLOCK ADAPTOR3 1
24 M-RTA-5000-1 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 1
23 MK260E-EXC HEAT EXCHANGER 1
POWER RATINGS

MK150E-NT10
230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

22 NUT M10 1
21 M-SPR-0850 SEPARATOR 1
20 MK260E-BLT830 BOLT M8x30 6
19 MK150E-RCV LIQUID RECEIVER 1
8.1 - ED & Spare Part List

18 MK260E-CPT2 CUPPER T2 1
17 M-BYV-1200 BY-PASS VALVE 1
16 MK260E-CPT1 CUPPER T1 2
15 MK260E-STC SETTING THE CONNECTION 1
DRYER PART NUMBER

14 MK260E-CTC2 CAPPILARY TUBE CONNECTION2 2

MK-US 700

13 MK260E-CTC1 CAPPILARY TUBE CONNECTION1 1

12 M-TSC-6000 T CONNECTION FOR SWITCH CAPILLARY 1
MKUS-700
MKUS-700
MKUS-700
MKUS-700

11 MK260E-BLT850 BOLT M8x50 4

10 MK160E-RTA1 ROTOLOCK ADAPTOR1 1
09 SEE.REF TABLE FAN OVERLOAD PROTECTOR 2
08 MK150E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
07 SEE.REF TABLE COMPRESSOR 1
06 MK150E-BLT825 BOLT M8x25 13
CAPACITY

05 MK260E-WHR22 WASHER 22x8,2x2,4 23

MK-150 US 700 SCFM
MK-150 US 700 SCFM
MK-150 US 700 SCFM
MK-150 US 700 SCFM

04 MK260E-BLT630 BOLT M6x30 30

03 SEE.REF TABLE FAN MOTOR 2
02 MK150E-CON CONDANSER 1
01 MK150E-CAB CABINET BASE 1
DECAL

DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 115
Page 116
3 4

70
72
97 98
7
8

93 63 13

93
5 10
94 88 16
100 17
101 15
14
92 2 12
MK-US 900

96
91

11
90

6 31
49 24
8.1 - ED & Spare Part List

18
25
50 26
44 57
7 45
44
19 69
8
23 57
56
28 56
99 47 46 9
95 99 29 48
30 32
89

86 35
34 56
29 19
37 20
43 30 27 26
26
30 27
87
37 62 58
55 51
64 21
38 60
39 36
26
42 52
54
35 53
31 22
34 30
29 59
35

30 34
84
61
83 43
65
85
30
33
71
80

73 81
74
82
75 40
1 76
77 41
63
86 78
67
66
79
68
 101 MK260E-HPG HIGH PRESSURE GAUGE 1
100 MK260E-LPG LOW PRESSURE GAUGE 1

M-TRF-6000-575-3-60
99 MK190E-RMS REMOVABLE SHIELD 4
98 MK170E-CAT CABINET TOP 1

TRANSFORMER
97 M-FAS-6000 CABINET FASTENER 14

MK260E-TRF
M-TRF-1600

M-TRF-1600
96 MK170E-CSB2 CABINET SIDE BOTTOM2 1

77
95 MK170E-CFB CABINET FRONT BOTTOM 1
94 MK170E-CFT CABINET FRONT TOP 1
93 MK170E-CST CABINET SIDE TOP 2
92 MK170E-CSB1 CABINET SIDE BOTTOM1 1
91 M-CHN-6000 CABINET HANDLE 6

COMPRESSOR
90 MK170E-CRB CABINET REAR BOTTOM

CONTACTOR
1

M-CNT-1600
M-CNT-1200
M-CNT-1200
M-CNT-1200
89 MK170E-CAI CABINET INSIDE 1
76
88 MK170E-CRT-US CABINET REAR TOP 1
87 MK170E-CAL2 CABINET LEG2 1
86 MK170E-CAL1 CABINET LEG1 3
85 MK260E-MSW MAIN SWITCH 1
84 MK260E-DCC-24 ADVANCED DIGITAL CONTROLLER 1
OVERLOAD PROTACTOR CONTACTOR

M-FCN-1200
M-FCN-1200
M-FCN-1200
83 PLASTIC CONTROL PANEL 1
M-CNT-MP

MK260E-PCP-ESD3
FAN

82 M-FNS-0200 FAN ON/OFF SWITCH 1

75

81 M-HPS-0200 HIGH PRESSURE SWITCH 1

80 MK260E-LPS LOW PRESSURE SWITCH 1
79 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
78 M-PPR-6000 PHASE PROTECTION RELAY 1
77 SEE.REF TABLE TRANSFORMER 1
76 SEE.REF TABLE COMPRESSOR CONTACTOR 1
75 SEE.REF TABLE FAN CONTACTOR 2
74 SEE.REF TABLE FAN OVERLOAD PROTECTION 1
FAN
74

M-FOP-1200
M-FOP-1200
M-FOP-1200
M-FOP-6000

73 M-PWC-1200 POWER CONNECTOR 3

72 M-STU-6000 CABINET STUD AND NUT 14
71 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
70 MK170E-FIE-Y COMPRESSED AIR FILTER (Y) 1
69 MK170E-FIE-X COMPRESSED AIR FILTER (X) 1
68 MK170E-ELP ELECTRICAL PANEL 1
67 MK260E-HNG HINGE 3
OVERLOAD PROTACTOR

66 MK260E-DLK DOOR LOCK 3

65 MK260E-SCF SWITCH CONNECTION FITTING 3
COMPRESSOR

64 MK210E-ASF ASTROFLEX 1
63 M-CCP-6000 CONDUIT FOR CONTROL PANEL 10
33

62 M-MMM-6000 MEMBRANE 1
M-COP-1600
M-COP-1600
M-COP-1200
M-COP-1600

61 MK170E-ELB-US ELECTRICAL BOX 1

60 MK260E-SVC SOLENOID VALVE COIL 1
59 M-OSO-1600 OIL SEPARATOR ORING 1
58 M-MMV-6000 MEMBRAN VALVE 1
57 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
56 MK260E-FTT FITTINGS 4
MK160E-CMP-230-3-60

MK160E-CMP-575-3-60

55 MK260E-MBC2 MANIFOLD BLIND CAP2 1

54 MK260E-MBC1 MANIFOLD BLIND CAP1 1
COMPRESSOR

53 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1

52 MK190E-DRM DRAIN MANIFOLD 1
MK160E-CMP
MK160E-CMP
28

51 MK260E-DRS-NPT DRAIN SLEEVE 1

50 M-RTA-5000-2 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
49 MK260E-CPT CUPPER T 2
48 M-CLP-1200 CLAMP 1
47 M-DRI-0700 DRYER-DEHYDRATOR 1
46 M-EXV-1200 EXPANSION VALVE 1
M-FMT-1200-400/460-3-50/60
M-FMT-1200-400/460-3-50/60
M-FMT-1200-400/460-3-50/60

45 MK190E-DST DISTRIBUTOR 1
44 MK260E-RTA4 ROTOLOCK ADAPTOR4 2
43 MK260E-RSV ROTOLOCK SERVICE VALVE 3
M-FMT-1200-575-3-60

42 M-OSP-1600 OIL SEPARATOR 1

41 MK170E-NUT10 NUT M10 1
FAN MOTOR

40 MK160E-SPR SEPERATOR 1
M-BYV-1200 BY-PASS VALVE 1
3

39
38 MK170E-RSM REINFORCEMENT SHEET METAL 1
37 MK260E-RTA2 ROTOLOCK ADAPTOR2 2
36 MK170E-RCV LIQUID RECEIVER 1
35 MK260E-BLT850 BOLT M8x50 10
34 MK260E-WHR22 WASHER 22x8,2x2,4 10
33 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTION 1
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED

32 MK160E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1

COOLING

31 M-RTA-5000-1 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 3

30 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 15
29 MK260E-RTA1 ROTOLOCK ADAPTOR1 3
28 SEE.REF TABLE COMPRESSOR 1
27 M-DBV-6000 DRAIN VALVE 2
26 MK260E-EWF ELBOW FITTINGS 6
25 MK260E-TCN T CONNECTION 1
POWER RATINGS

230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

24 MK260E-BLV BALL VALVE 1

23 MK170E-ELW ELBOW 2
22 M-OSE-1600 OIL SEPARATOR ELEMENT 1
21 M-SLV-6000-24 SOLENOID VALVE 1
20 MK170E-NIP1/4 1 / 4" NIPPLE 3
8.1 - ED & Spare Part List

19 MK170E-CHV CHECH VALVE 2

18 MK170E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
17 MK170E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
DRYER PART NUMBER

16 MK170E-BLT815 BOLT M8x15 8

15 MK170E-CNK2-NPT CONNECTION KIT 2 2
MK-US 900

ORING
MKUS-900
MKUS-900
MKUS-900
MKUS-900

14 MK170E-ORG 4
13 MK170E-CPG2 COUPLING CLAMP 2 4
12 MK170E-CNK1 CONNECTION KIT 1 2
11 MK170E-CLL COLLECTOR 2
10 MK260E-CPG1 COUPLING CLAMP 1 8
09 MK170E-EXC HEAT EXCHANGER 2
08 MK260E-BLT630 BOLT M6x30 48
07 M-NUT-6000 CAGE NUT M6 48
CAPACITY

06 MK170E-CRP CONDENSER REINFORCEMENT PLATE 1

MK-160 US 900 SCFM
MK-160 US 900 SCFM
MK-160 US 900 SCFM
MK-160 US 900 SCFM

05 MK170E-FPRT FAN PROTECTOR 1

04 MK260E-BLT630 BOLT M6x30 8
03 SEE.REF TABLE FAN MOTOR 2
02 MK170E-CON CONDENSER 1
01 MK170E-CAB CABINET BASE 1
DECAL

DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 117
Page 118
3 4

70
72
97 98
7
8

93 63 13

93
5 10
94 88 16
100 17
101 15
14
92 2 12
96
91
MK-US 1100

11
90

6 31
24
8.1 - ED & Spare Part List

49
18
25
50 26
44 57
7 45
44
19 69
8
23 57
56
28 56
99 47 46 9
95 99 29 48
30 32
89

86 35
34 56
29 19
37 20
43 30 27 26
26
30 27
87
37 62 58
55 51
64 21
38 60
39 36
26
42 52
54
35 53
31 22
34 30
29 59
35

30 34
84
61
83 43
65
85
30
33
71
80

73 81
74
82
75 40
1 76
77 41
63
86 78
67
66
79
68
 101 MK260E-HPG HIGH PRESSURE GAUGE 1
100 MK260E-LPG LOW PRESSURE GAUGE 1

M-TRF-6000-575-3-60
99 MK190E-RMS REMOVABLE SHIELD 4

TRANSFORMER
98 MK170E-CAT CABINET TOP 1
97 M-FAS-6000 CABINET FASTENER 14

MK260E-TRF
M-TRF-1600

M-TRF-1600
77
96 MK170E-CSB2 CABINET SIDE BOTTOM2 1
95 MK170E-CFB CABINET FRONT BOTTOM 1
94 MK170E-CFT CABINET FRONT TOP 1
93 MK170E-CST CABINET SIDE TOP 2
92 MK170E-CSB1 CABINET SIDE BOTTOM1 1
91 M-CHN-6000 CABINET HANDLE 6

COMPRESSOR
CONTACTOR
90 MK170E-CRB CABINET REAR BOTTOM 1

M-CNT-1200
M-CNT-1200
M-CNT-1200
M-CNT-1600
89 MK170E-CAI CABINET INSIDE 1
76 88 MK170E-CRT-US CABINET REAR TOP 1
87 MK170E-CAL2 CABINET LEG2 1
86 MK170E-CAL1 CABINET LEG1 3
85 MK260E-MSW MAIN SWITCH 1
CONTACTOR
84 MK260E-DCC-24 ADVANCED DIGITAL CONTROLLER 1

M-FCN-1200
M-FCN-1200
M-FCN-1200
M-CNT-MP
83 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
FAN
75

82 M-FNS-0200 FAN ON/OFF SWITCH 1

81 M-HPS-0200 HIGH PRESSURE SWITCH 1
80 MK260E-LPS LOW PRESSURE SWITCH 1
79 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
PHASE PROTECTION RELAY
OVERLOAD PROTACTOR

78 M-PPR-6000 1
77 SEE.REF TABLE TRANSFORMER 1
76 SEE.REF TABLE COMPRESSOR CONTACTOR 1
75 SEE.REF TABLE FAN CONTACTOR 2
74 SEE.REF TABLE FAN OVERLOAD PROTECTION 1
FAN
74

M-FOP-6000
M-FOP-1200
M-FOP-1200
M-FOP-1200

73 M-PWC-1200 POWER CONNECTOR 3

72 M-STU-6000 CABINET STUD AND NUT 14
71 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
70 MK170E-FIE-Y COMPRESSED AIR FILTER (Y) 1
69 MK170E-FIE-X COMPRESSED AIR FILTER (X) 1
68 MK170E-ELP ELECTRICAL PANEL 1
OVERLOAD PROTACTOR

67 MK260E-HNG HINGE 3
66 MK260E-DLK DOOR LOCK 3
65 MK260E-SCF SWITCH CONNECTION FITTING 3
COMPRESSOR

64 MK210E-ASF ASTROFLEX 1
63 M-CCP-6000 CONDUIT FOR CONTROL PANEL 10
33

M-MMM-6000
M-COP-1600
M-COP-1600
M-COP-1200

62 MEMBRANE
M-COP-1600

1
61 MK170E-ELB-US ELECTRICAL BOX 1
60 MK260E-SVC SOLENOID VALVE COIL 1
59 M-OSO-1600 OIL SEPARATOR ORING 1
58 M-MMV-6000 MEMBRAN VALVE 1
57 MK260E-RDC REDUCTION 1 / 2" - 1 / 4" 2
56 MK260E-FTT FITTINGS 4
M-CMP-1000-460-3-60
M-CMP-1000-460-3-60
M-CMP-1000-575-3-60
M-CMP-1000-230-3-60

55 MK260E-MBC2 MANIFOLD BLIND CAP2 1

COMPRESSOR

54 MK260E-MBC1 MANIFOLD BLIND CAP1 1

53 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1
52 MK190E-DRM DRAIN MANIFOLD 1
28

51 MK260E-DRS-NPT DRAIN SLEEVE 1

50 M-RTA-5000-2 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
49 MK260E-CPT CUPPER T 2
48 M-CLP-1200 CLAMP 1
47 M-DRI-0700 DRYER-DEHYDRATOR 1
46 M-EXV-1200 EXPANSION VALVE 1
M-FMT-1200-400/460-3-50/60
M-FMT-1200-400/460-3-50/60
M-FMT-1200-400/460-3-50/60

45 MK190E-DST DISTRIBUTOR 1
44 MK260E-RTA4 ROTOLOCK ADAPTOR4 2
43 MK260E-RSV ROTOLOCK SERVICE VALVE 3
M-FMT-1200-575-3-60

42 M-OSP-1600 OIL SEPARATOR 1

41 MK170E-NUT10 NUT M10 1
FAN MOTOR

40 MK160E-SPR SEPERATOR 1
3

39 M-BYV-1200 BY-PASS VALVE 1

38 MK170E-RSM REINFORCEMENT SHEET METAL 1
37 MK260E-RTA2 ROTOLOCK ADAPTOR2 2
36 MK170E-RCV LIQUID RECEIVER 1
35 MK260E-BLT850 BOLT M8x50 10
34 MK260E-WHR22 WASHER 22x8,2x2,4 10
33 SEE.REF TABLE COMPRESSOR OVERLOAD PROTECTION 1
AIR COOLED
AIR COOLED
AIR COOLED
AIR COOLED
COOLING

32 MK160E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1

31 M-RTA-5000-1 ROTOLOCK VALVE ADAPTOR FOR HEAT EXCHANGER 3
30 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 15
29 MK260E-RTA1 ROTOLOCK ADAPTOR1 3
28 SEE.REF TABLE COMPRESSOR 1
27 M-DBV-6000 DRAIN VALVE 2
26 MK260E-EWF ELBOW FITTINGS 6
T CONNECTION
POWER RATINGS

25 MK260E-TCN 1
230V/3Ph/60Hz
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

24 MK260E-BLV BALL VALVE 1

23 MK170E-ELW ELBOW 2
22 M-OSE-1600 OIL SEPARATOR ELEMENT 1
21 M-SLV-6000-24 SOLENOID VALVE 1
8.1 - ED & Spare Part List

20 MK170E-NIP1/4 1 / 4" NIPPLE 3

19 MK170E-CHV CHECH VALVE 2
18 MK170E-ELK-X COMPRESSED AIR FILTER KIT (X) 1
17 MK170E-ELK-Y COMPRESSED AIR FILTER KIT (Y) 1
DRYER PART NUMBER
MK-US 1100

16 MK170E-BLT815 BOLT M8x15 8

15 MK170E-CNK2-NPT CONNECTION KIT 2 2
MKUS-1100
MKUS-1100
MKUS-1100
MKUS-1100

14 MK170E-ORG ORİNG 4
13 MK170E-CPG2 COUPLING CLAMP 2 4
12 MK170E-CNK1 CONNECTION KIT 1 2
11 MK170E-CLL COLLECTOR 2
10 MK260E-CPG1 COUPLING CLAMP 1 8
09 MK170E-EXC HEAT EXCHANGER 2
08 MK260E-BLT630 BOLT M6x30 48
07 M-NUT-6000 CAGE NUT M6 48
CAPACITY

MK170E-CRP 1
MK-170 US 1100 SCFM
MK-170 US 1100 SCFM
MK-170 US 1100 SCFM
MK-170 US 1100 SCFM

06 CONDENSER REINFORCEMENT PLATE

05 MK170E-FPRT FAN PROTECTOR 1
04 MK260E-BLT630 BOLT M6x30 8
03 SEE.REF TABLE FAN MOTOR 2
02 MK170E-CON CONDENSER 1
01 MK170E-CAB CABINET BASE 1
DECAL

DWG ITEM
NO. PART NO SPARE PART CODE REV QTY
SIZE
PART LIST

Page 119
 4 6

Page 120
98
20

99

9
10

90
11

92
7
89
101
95

102 94 19

2
MK-US 1350

17
91
8.1 - ED & Spare Part List

93
15

21
22

14

9
8
97 10
88
83 51 38
100
96
12
35 25
39 52
36 26
50

84 16
38
18
49

13
48
29
47
23 55
61
30 60 65
59 73
45
29
46 28 53
27 62
72 58
33 63 57 54
86 29 56
32 34
85 75 66

87
31

74 69

77 76 70

42 71
78

40 79
1
80
11
81
23 23 24 68
83 41 37 67
82
64

44
43
 102 MK260E-HPG HIGH PRESSURE GAUGE 1
101 MK260E-LPG LOW PRESSURE GAUGE 1

M-TRF-6000-575-3-60
100 MK190E-RMS REMOVABLE SHIELD 4
99 M-FAS-6000 CABINET FASTENER 14
98 MK190E-CAT CABINET TOP 1

TRANSFORMER
97 MK190E-CPS CABINET POST SECONDARY SIDE 2

MK260E-TRF
96 MK190E-CRS CABINET REAR SIDE BOTTOM 1

M-TRF-1600
95 M-CHN-6000 CABINET HANDLE (NEW) 10

80
94 MK190E-CSB2-US CABINET SIDE BOTTOM2 1
93 MK190E-CSB1 CABINET REAR BOTTOM1 1
92 MK190E-CRT-US CABINET REAR TOP 1
91 MK190E-CSB CABINET SIDE BOTTOM 2
90 MK190E-CST CABINET SIDE TOP 4
89 MK190E-CFT CABINET FRONT TOP 1
88 MK190E-CFB CABINET FRONT BOTTOM 1
87 MK260E-MSW MAIN SWITCH 1
86 MK260E-DCC-24 ADVANCED DIGITAL CONTROLLER 1

M-CMP-1200-460-3-60
M-CMP-1200-460-3-60
M-CMP-1200-575-3-60
85 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
84 MK190E-CAL2 CABINET LEG2 1
COMPRESSOR

83 MK190E-CAL1 CABINET LEG1 3

82 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
81 M-PPR-6000 PHASE PROTECTION RELAY 1
29

80 SEE.REF TABLE TRANSFORMER 1

79 M-CNT-1600 COMPRESSOR CONTACTOR 1
78 M-CNT-MP FAN CONTACTOR 1
77 M-PWC-2400 POWER CONNECTOR 3
76 M-COP-1600 COMPRESSOR OVERLOAD PROTECTION 1
75 MK210E-RTA1 ROTOLOCK ADAPTOR1 1
74 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
73 MK260E-SVC SOLENOID VALVE COIL 1
72 M-MMM-6000 MEMBRANE 1
71 M-FNS-0200 FAN ON/OFF SWITCH 1
70 M-HPS-0200 HIGH PRESSURE SWITCH 1
69 MK260E-LPS LOW PRESSURE SWICH 1
68 MK260E-HNG HINGE 3
67 MK260E-DLK DOOR LOCK 3
M-FMT-1600-460-3-60
M-FMT-1600-460-3-60
M-FMT-1600-575-3-60

66 MK260E-SCF SWITCH CONNECTION FITTING 3

65 MK260E-DRS-NPT DRAIN SLEEVE 1
MK190E-ELP ELECTRICAL PANEL 1
FAN MOTOR

64
63 MK190E-ELB-US ELECTRICAL BOX 1
62 MK260E-T12 T 1/2" 1
4

61 MK260E-FTS FLAT FITTINGS 1

60 MK260E-T14 T 1/4" 1
59 M-DBV-6000 DRAIN BALL VALVE 3
58 M-MMV-6000 MEMBRAN VALVE 1
57 M-SLV-6000-24 SOLENOID VALVE 1
56 MK260E-EWF2 ELBOW FITTINGS2 1
55 MK260E-MBC1 MANIFOLD BLIND CAP1 3
54 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1
53 MK260E-DRM DRAIN MANIFOLD 1
52 MK260E-PPC PLASTIC PIPE CLAMP 1
AIR COOLED
AIR COOLED
AIR COOLED

51 MK190E-PCS PIPING CONNECTION SHEET 1

COOLING

50 M-BYV-1200 BY-PASS VALVE 1

49 MK190E-DST DISTRIBUTOR 1
48 MK260E-DSTK DISTRIBUTOR CLAMP 1
47 M-EXV-1200 EXPANSION VALVE 1
46 M-CLP-1200 CLAMP 1
45 MK190E-DRI DRYER-DEHYDRATOR 1
44 M-CPF-6000 1/4 CUPPER PIPE FITTING 2
43 MK260E-RSV ROTOLOCK SERVICE VALVE 2
42 MK210E-ASF ASTROFLEX 1
41 MK190E-SGL2 SIGHT GLASS2 1
40 M-OSP-1600 OIL SEPARATOR 1
POWER RATINGS

39 MK260E-CTC1 CAPPILARY TUBE CONNECTION1 8

400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

38 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 3

37 M-OSO-1600 OIL SEPARATOR ORING 1
36 MK190E-RCV LIQUID RECEIVER 1
35 MK190E-SPR SEPERATOR 1
34 MK190E-SGL1 SIGHT GLASS1 1
33 MK260E-BLT850 BOLT M8x50 10
32 MK260E-WHR22 WASHER 22x8,2x2,4 10
31 M-FOP-1600 FAN OVERLOAD PROTECTOR 2
30 MK190E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
29 SEE.REF TABLE COMPRESSOR 1
28 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 3
DRYER PART NUMBER

27 MK260E-EWF1 ELBOW FITTINGS1 4

26 MK260E-RTA4 ROTOLOCK ADAPTOR4 2
25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
24 M-OSE-1600 OIL SEPARATOR ELEMENT 1
MKUS-1350
MKUS-1350
MKUS-1350

23 MK160E-RTA2 ROTOLOCK ADAPTOR2 2

22 MK210E-CPG4 COUPLING CLAMP 4 2
21 MK260E-BLA BALL VALVE G 1/4" 1
8.1 - ED & Spare Part List

20 M-STU-6000 CABINET STUD AND NUT 14

19 MK210E-CPG3 COUPLING CLAMP 3 4
18 M-SCF-6000 SENSOR CONNECTION FITTING 1
17 MK210E-FLG-US FLANGE 2
MK-US 1350

16 MK190E-CLLB COLLECTOR BOTTOM 1

15 MK190E-CLLT COLLECTOR TOP 1
14 MK260E-CPG1 COUPLING CLAMP 1 4
13 MK260E-EXC HEAT EXCHANGER 2
12 MK150E-RTA2 ROTOLOCK ADAPTOR2 2
CAPACITY

M-CCP-6000 CONDUIT FOR CONTROL PANEL 8

MK-180 US 1350 SCFM
MK-180 US 1350 SCFM
MK-180 US 1350 SCFM

11
10 MK260E-BLT630 BOLT M6x30 58
09 M-NUT-6000 CAGE NUT M6 58
08 MK190E-CRP CONDENSER REINFORCEMENT PLATE 1
07 MK190E-FPRT FAN PROTECTOR 1
06 MK260E-BLT630 BOLT M8x30 8
05 N/A N/A -
04 SEE.REF TABLE FAN MOTOR 2
03 N/A N/A -
DECAL

02 MK190E-CON CONDANSER 1
01 MK190E-CAB CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 121
Page 122
4 6

98
20

99

9
10

90
11

92
7
89
101
95

102 94 19
MK-US 1500

17
91
8.1 - ED & Spare Part List

93
15

21
22

14

9
8
97 10
88
83 51 38
100
96
12
35 25
39 52
36 26
50

84 16
38
18
49

13
48
29
47
23 55
61
30 60 65
59 73
45
29
46 28 53
27 62
72 58
33 63 57 54
86 29 56
32 34
85 75 66

87
31

74 69

77 76 70

42 71
78

40 79
1
80
11
24 81
23 23 68
83 41 37 67
82
64

44
43
 102 MK260E-HPG HIGH PRESSURE GAUGE 1
101 MK260E-LPG LOW PRESSURE GAUGE 1

M-TRF-6000-575-3-60
100 MK190E-RMS REMOVABLE SHIELD 4
99 M-FAS-6000 CABINET FASTENER 14

TRANSFORMER
98 MK190E-CAT CABINET TOP 1
97 MK190E-CPS CABINET POST SECONDARY SIDE 2

MK260E-TRF
96 MK190E-CRS CABINET REAR SIDE BOTTOM 1

M-TRF-1600
80
95 M-CHN-6000 CABINET HANDLE (NEW) 10
94 MK190E-CSB2-US CABINET SIDE BOTTOM2 1
93 MK190E-CSB1 CABINET REAR BOTTOM1 1
92 MK190E-CRT-US CABINET REAR TOP 1
91 MK190E-CSB CABINET SIDE BOTTOM 2
90 MK190E-CST CABINET SIDE TOP 4
89 MK190E-CFT CABINET FRONT TOP 1
88 MK190E-CFB CABINET FRONT BOTTOM 1
87 MK260E-MSW MAIN SWITCH 1
M-CMP-1600-460-3-60 86 MK260E-DCC-24 ADVANCED DIGITAL CONTROLLER 1

M-CMP-1600-460-3-60
M-CMP-1600-575-3-60
85 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
COMPRESSOR

84 MK190E-CAL2 CABINET LEG2 1

83 MK190E-CAL1 CABINET LEG1 3
82 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
81 M-PPR-6000 PHASE PROTECTION RELAY 1
29

80 SEE.REF TABLE TRANSFORMER 1

79 M-CNT-1600 COMPRESSOR CONTACTOR 1
78 M-CNT-MP FAN CONTACTOR 1
77 M-PWC-2400 POWER CONNECTOR 3
76 M-COP-1600 COMPRESSOR OVERLOAD PROTECTION 1
75 MK210E-RTA1 ROTOLOCK ADAPTOR1 1
74 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
73 MK260E-SVC SOLENOID VALVE COIL 1
72 M-MMM-6000 MEMBRANE 1
71 M-FNS-0200 FAN ON/OFF SWITCH 1
70 M-HPS-0200 HIGH PRESSURE SWITCH 1
69 MK260E-LPS LOW PRESSURE SWICH 1
68 MK260E-HNG HINGE 3
DOOR LOCK
M-FMT-1600-460-3-60
M-FMT-1600-460-3-60
M-FMT-1600-575-3-60

67 MK260E-DLK 3
66 MK260E-SCF SWITCH CONNECTION FITTING 3
65 MK260E-DRS-NPT DRAIN SLEEVE 1
FAN MOTOR

64 MK190E-ELP ELECTRICAL PANEL 1

63 MK190E-ELB-US ELECTRICAL BOX 1
62 MK260E-T12 T 1/2" 1
4

61 MK260E-FTS FLAT FİTTİNGS 1

60 MK260E-T14 T 1/4" 1
59 M-DBV-6000 DRAIN BALL VALVE 3
58 M-MMV-6000 MEMBRAN VALVE 1
57 M-SLV-6000-24 SOLENOID VALVE 1
56 MK260E-EWF2 ELBOW FITTINGS2 1
55 MK260E-MBC1 MANIFOLD BLIND CAP1 3
54 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1
53 MK260E-DRM DRAIN MANIFOLD 1
52 MK260E-PPC PLASTIC PIPE CLAMP 1
AIR COOLED
AIR COOLED
AIR COOLED

51 MK190E-PCS PIPING CONNECTION SHEET 1

COOLING

50 M-BYV-1200 BY-PASS VALVE 1

49 MK190E-DST DISTRIBUTOR 1
48 MK260E-DSTK DISTRIBUTOR CLAMP 1
47 M-EXV-1200 EXPANSION VALVE 1
46 M-CLP-1200 CLAMP 1
45 MK190E-DRI DRYER-DEHYDRATOR 1
44 M-CPF-6000 1/4 CUPPER PIPE FITTING 2
43 MK260E-RSV ROTOLOCK SERVICE VALVE 2
42 MK210E-ASF ASTROFLEX 1
41 MK190E-SGL2 SIGHT GLASS2 1
40 M-OSP-1600 OIL SEPARATOR 1
POWER RATINGS

39 MK260E-CTC1 CAPPILARY TUBE CONNECTION1 8

400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

38 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 3

37 M-OSO-1600 OIL SEPARATOR ORING 1
36 MK190E-RCV LIQUID RECEIVER 1
35 MK190E-SPR SEPERATOR 1
34 MK190E-SGL1 SIGHT GLASS1 1
33 MK260E-BLT850 BOLT M8x50 10
32 MK260E-WHR22 WASHER 22x8,2x2,4 10
31 M-FOP-1600 FAN OVERLOAD PROTECTOR 2
30 MK190E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
29 SEE.REF TABLE COMPRESSOR 1
28 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 3
DRYER PART NUMBER

27 MK260E-EWF1 ELBOW FITTINGS1 4

26 MK260E-RTA4 ROTOLOCK ADAPTOR4 2
25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
24 M-OSE-1600 OIL SEPARATOR ELEMENT 1
MKUS-1500
MKUS-1500
MKUS-1500

23 MK160E-RTA2 ROTOLOCK ADAPTOR2 2

22 MK210E-CPG4 COUPLING CLAMP 4 2
21 MK260E-BLA BALL VALVE G 1/4" 1
8.1 - ED & Spare Part List

20 M-STU-6000 CABINET STUD AND NUT 14

19 MK210E-CPG3 COUPLING CLAMP 3 4
18 M-SCF-6000 SENSOR CONNECTION FITTING 1
17 MK210E-FLG-US FLANGE 2
MK-US 1500

16 MK190E-CLLB COLLECTOR BOTTOM 1

15 MK190E-CLLT COLLECTOR TOP 1
14 MK260E-CPG1 COUPLING CLAMP 1 4
13 MK260E-EXC HEAT EXCHANGER 2
12 MK150E-RTA2 ROTOLOCK ADAPTOR2 2
CAPACITY

MK-190 US 1500 SCFM

MK-190 US 1500 SCFM
MK-190 US 1500 SCFM

11 M-CCP-6000 CONDUIT FOR CONTROL PANEL 8

10 MK260E-BLT630 BOLT M6x30 58
09 M-NUT-6000 CAGE NUT M6 58
08 MK190E-CRP CONDENSER REINFORCEMENT PLATE 1
07 MK190E-FPRT FAN PROTECTOR 1
06 MK260E-BLT630 BOLT M8x30 8
05 N/A N/A -
04 SEE.REF TABLE FAN MOTOR 2
03 N/A N/A -
DECAL

02 MK190E-CON CONDANSER 1
01 MK190E-CAB CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 123
 4 6

Page 124
93
68
94
11

9 7
85
10

84 87
60 43
57
95 2
91
43

96

19
MK-US 2000

86 90
17
8
83 34
59
8.1 - ED & Spare Part List

88 43
9 60
57
10 43

15
92
35 21
89 14
23

24
78
39 25
38
29 26
37
30 41 16
42 40
43
33 54
13
55
32 97 37
22
78 56

28
36 27

34 44
81
80
82 58
61 27 53
51 28
69 31
50 47
64
49 52
65
72 71 45
1 66 48
73 46
20
74
79 3 75
11
76 63
37 23 5
77 62
12

18
 97 MK260E-RTA3 ROTOLOCK ADAPTOR3 1
96 MK260E-HPG HIGH PRESSURE GAUGE 1
95 MK260E-LPG LOW PRESSURE GAUGE 1

M-TRF-6000-575-3-60
94 M-FAS-6000 CABINET FASTENER 14
93 MK190E-CAT CABINET TOP 1

TRANSFORMER
92 MK210E-CPS CABINET POST SECONDARY SIDE 2
91 M-CHN-6000 CABINET HANDLE 10

MK260E-TRF
90 MK210E-CRS CABINET REAR SIDE BOTTOM 2

M-TRF-1600
80
89 MK210E-CSB2-US CABINET SIDE BOTTOM2 1
88 MK210E-CSB1 CABINET REAR BOTTOM1 1
87 MK210E-CRT-US CABINET REAR TOP 1
86 MK210E-CSB CABINET SIDE BOTTOM 1
85 MK210E-CST CABINET SIDE TOP 4
84 MK210E-CFT CABINET FRONT TOP 1
83 MK210E-CFB CABINET FRONT BOTTOM 1
82 MK260E-MSW MAIN SWITCH 1
81 MK260E-DCC-24 ADVANCED DIGITAL CONTROLLER 1
M-CMP-2000-460-3-60
M-CMP-2000-460-3-60
M-CMP-2000-575-3-60
80 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
COMPRESSOR

79 MK210E-CAL2 CABINET LEG2 1

78 MK210E-CAL1 CABINET LEG1 3
77 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
76 M-PPR-6000 PHASE PROTECTION RELAY 1
29

75 SEE.REF TABLE TRANSFORMER 1

74 M-CNT-2400 COMPRESSOR CONTACTOR 1
73 M-CNT-MP FAN CONTACTOR 2
72 M-PWC-2400 POWER CONNECTOR 3
71 M-COP-3000 COMPRESSOR OVERLOAD PROTECTION 1
70 N/A N/A -
69 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
68 M-STU-6000 CABINET STUD AND NUT 14
67 N/A N/A -
66 M-FNS-0200 FAN ON/OFF SWITCH 1
65 M-HPS-0200 HIGH PRESSURE SWITCH 1
64 MK260E-LPS LOW PRESSURE SWICH 1
M-FMT-6000-460-3-60
M-FMT-6000-460-3-60
M-FMT-6000-575-3-60

63 MK260E-HNG HINGE 3
62 MK260E-DLK DOOR LOCK 3
61 MK260E-SCF SWITCH CONNECTION FITTING 3
FAN MOTOR

60 MK260E-GBV-1/4 BALL VALVE 1/4 1

59 MK210E-BSLV BY BASS SOLENOID VALVE 1
58 MK210E-ELB-US ELECTRICAL BOX 1
4

57 M-BYV-1600 BY PASS VALVE 1

56 M-CPF-6000-O 1/4 90* ORIFICE CUPPER PIPE FITTING 1
55 MK260E-FTS FLAT FITTINGS 1
54 M-SCF-6000 SENSOR CONNECTION FITTING 1
53 MK260E-MAS MANSON 1/2" 2
52 MK260E-DRS-NPT DRAIN SLEEVE 1
51 MK260E-T14 ELBOW FITTINGS T 1/4" 1
50 M-MMM-6000 MEMBRANE 2
49 M-MMV-6000 MEMBRAN VALVE 2
AIR COOLED
AIR COOLED
AIR COOLED

48 MK260E-MBC2 MANIFOLD BLIND CAP2 1

COOLING

47 MK260E-MBC1 MANIFOLD BLIND CAP1 3

46 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1
45 MK260E-DRM DRAIN MANIFOLD 1
44 M-SLV-6000-24 SOLENOID VALVE 1
43 MK260E-GBV BALL VALVE 5
42 MK260E-DSTK DISTRIBUTOR CLAMP 1
41 MK210E-DST DISTRIBUTOR 1
40 M-EXV-2400 EXPANSION VALVE 1
39 MK210E-DRI DRYER-DEHYDRATOR 1
38 M-CLP-1200 CLAMP 1
POWER RATINGS

37 MK160E-RTA2 ROTOLOCK ADAPTOR2 4

400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

36 MK210E-RCV LIQUID RECEIVER 1

35 MK210E-SPR SEPERATOR 1
34 MK260E-SVC SOLENOID VALVE COIL 2
33 MK260E-BLT850 BOLT M8x50 10
32 MK260E-WHR22 WASHER 22x8,2x2,4 10
31 M-COP-0325 FAN OVERLOAD PROTECTOR 2
30 MK210E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
29 SEE.REF TABLE COMPRESSOR 1
28 M-DBV-6000 DRAIN BALL VALVE 5
27 MK260E-EWF1 ELBOW FITTINGS1 10
26 MK260E-RTA4 ROTOLOCK ADAPTOR4 3
DRYER PART NUMBER

25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2

24 M-RTA-5000-T-2 ROTALOCK VALVE "T"ADAPTOR FOR HEAT EXCHANGER 1
23 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 4
22 MK210E-CPG4 COUPLING CLAMP 4 2
MKUS-2000
MKUS-2000
MKUS-2000

21 MK260E-BLV BALL VALVE 1

20 MK210E-ASF ASTROFLEX 1
19 MK210E-CPG3 COUPLING CLAMP 3 6
8.1 - ED & Spare Part List

18 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 3

17 MK210E-CPG2-UL COUPLING CLAMP 2 2
16 MK210E-CLLB COLLECTOR BOTTOM 1
MK-US 2000

15 MK210E-CLLT COLLECTOR TOP 1

14 MK260E-CPG1 COUPLING CLAMP 1 6
13 MK260E-EXC HEAT EXCHANGER 3
12 M-OSO-2400 OIL SEPARATOR ORING 1
11 M-CCP-6000 CONDUIT FOR CONTROL PANEL 5
CAPACITY

MK-200 US 2000 SCFM

MK-200 US 2000 SCFM
MK-200 US 2000 SCFM

10 MK260E-BLT630 BOLT M6x30 58

09 M-NUT-6000 CAGE NUT M6 58
08 MK210E-CRP CONDENSER REINFORCEMENT PLATE 1
07 MK210E-FPRT FAN PROTECTOR 1
06 MK260E-BLT830 BOLT M8x30 8
05 M-OSE-2400 OIL SEPARATOR ELEMENT 1
04 SEE.REF TABLE FAN MOTOR 2
03 M-OSP-2400 OIL SEPARATOR 1
DECAL

02 MK210E-CON CONDANSER 1
01 MK210E-CAB CABINET BASE 1
DWG ITEM
NO. PART NO SPARE PART CODE REV QTY
SIZE
PART LIST

Page 125
Page 126
4 6

93
68
94
11

9 7
85
10

84 87
60 43
57
95 2
91
43

96
MK-US 2350

19
86 90
17
8
83 34
59
8.1 - ED & Spare Part List

88 43
9 60
57
10 43

15
92
35 21
89 14
23

24
78
39 25
38
29 26
37
30 41 16
42 40
43
33 54
13
55
32 97 37
22
78 56

28
36 27

34 44
81
80
82 58
61 27 53
51 28
69 31
50 47
64
49 52
65
72 71 45
1 66 48
73 46
20
74
79 3 75
11
76 63
37 23 5
77 62
12

18
 97 MK260E-RTA3 ROTOLOCK ADAPTOR3 1
96 MK260E-HPG HIGH PRESSURE GAUGE 1

M-TRF-6000-575-3-60
95 MK260E-LPG LOW PRESSURE GAUGE 1
94 M-FAS-6000 CABINET FASTENER 14

TRANSFORMER
93 MK190E-CAT CABINET TOP 1
92 MK210E-CPS CABINET POST SECONDARY SIDE 2

MK260E-TRF
91 M-CHN-6000 CABINET HANDLE 10

M-TRF-1600
80
90 MK210E-CRS CABINET REAR SIDE BOTTOM 2
89 MK210E-CSB2-US CABINET SIDE BOTTOM2 1
88 MK210E-CSB1 CABINET REAR BOTTOM1 1
87 MK210E-CRT-US CABINET REAR TOP 1
86 MK210E-CSB CABINET SIDE BOTTOM 1
85 MK210E-CST CABINET SIDE TOP 4
84 MK210E-CFT CABINET FRONT TOP 1
83 MK210E-CFB CABINET FRONT BOTTOM 1
M-CMP-2400-460-3-60 82 MK260E-MSW MAIN SWITCH 1

M-CMP-2400-460-3-60
M-CMP-2400-575-3-60
81 MK260E-DCC-24 ADVANCED DIGITAL CONTROLLER 1
80 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
COMPRESSOR

79 MK210E-CAL2 CABINET LEG2 1

78 MK210E-CAL1 CABINET LEG1 3
77 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
29

76 M-PPR-6000 PHASE PROTECTION RELAY 1

75 SEE.REF TABLE TRANSFORMER 1
74 M-CNT-2400 COMPRESSOR CONTACTOR 1
73 M-CNT-MP FAN CONTACTOR 2
72 M-PWC-2400 POWER CONNECTOR 3
71 M-COP-3000 COMPRESSOR OVERLOAD PROTECTION 1
70 N/A N/A -
69 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
68 M-STU-6000 CABINET STUD AND NUT 14
67 N/A N/A -
66 M-FNS-0200 FAN ON/OFF SWITCH 1
65 M-HPS-0200 HIGH PRESSURE SWITCH 1
64 MK260E-LPS LOW PRESSURE SWICH 1
M-FMT-6000-460-3-60
M-FMT-6000-460-3-60
M-FMT-6000-575-3-60

63 MK260E-HNG HINGE 3
62 MK260E-DLK DOOR LOCK 3
61 MK260E-SCF SWITCH CONNECTION FITTING 3
FAN MOTOR

60 MK260E-GBV-1/4 BALL VALVE 1/4 1

59 MK210E-BSLV BY BASS SOLENOID VALVE 1
4

58 MK210E-ELB-US ELECTRICAL BOX 1

57 M-BYV-1600 BY PASS VALVE 1
56 M-CPF-6000-O 1/4 90* ORIFICE CUPPER PIPE FITTING 1
55 MK260E-FTS FLAT FITTINGS 1
54 M-SCF-6000 SENSOR CONNECTION FITTING 1
53 MK260E-MAS MANSON 1/2" 2
52 MK260E-DRS-NPT DRAIN SLEEVE 1
51 MK260E-T14 ELBOW FITTINGS T 1/4" 1
50 M-MMM-6000 MEMBRANE 2
AIR COOLED
AIR COOLED
AIR COOLED

49 M-MMV-6000 MEMBRAN VALVE 2

48
COOLING

MK260E-MBC2 MANIFOLD BLIND CAP2 1

47 MK260E-MBC1 MANIFOLD BLIND CAP1 3
46 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1
45 MK260E-DRM DRAIN MANIFOLD 1
44 M-SLV-6000-24 SOLENOID VALVE 1
43 MK260E-GBV BALL VALVE 5
42 MK260E-DSTK DISTRIBUTOR CLAMP 1
41 MK210E-DST DISTRIBUTOR 1
40 M-EXV-2400 EXPANSION VALVE 1
39 MK210E-DRI DRYER-DEHYDRATOR 1
38 M-CLP-1200 CLAMP 1
POWER RATINGS

37 MK160E-RTA2 ROTOLOCK ADAPTOR2 4

400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

36 MK210E-RCV LIQUID RECEIVER 1

35 MK210E-SPR SEPERATOR 1
34 MK260E-SVC SOLENOID VALVE COIL 2
33 MK260E-BLT850 BOLT M8x50 10
32 MK260E-WHR22 WASHER 22x8,2x2,4 10
31 M-COP-0325 FAN OVERLOAD PROTECTOR 2
30 MK210E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
29 SEE.REF TABLE COMPRESSOR 1
28 M-DBV-6000 DRAIN BALL VALVE 5
27 MK260E-EWF1 ELBOW FITTINGS1 10
26 MK260E-RTA4 ROTOLOCK ADAPTOR4 3
DRYER PART NUMBER

25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2

24 M-RTA-5000-T-2 ROTALOCK VALVE "T"ADAPTOR FOR HEAT EXCHANGER 1
23 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 4
22 MK210E-CPG4 COUPLING CLAMP 4 2
MKUS-2350
MKUS-2350
MKUS-2350

21 MK260E-BLV BALL VALVE 1

20 MK210E-ASF ASTROFLEX 1
8.1 - ED & Spare Part List

19 MK210E-CPG3 COUPLING CLAMP 3 6

18 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 3
17 MK210E-CPG2-UL COUPLING CLAMP 2 2
16 MK210E-CLLB COLLECTOR BOTTOM 1
MK-US 2350

15 MK210E-CLLT COLLECTOR TOP 1

14 MK260E-CPG1 COUPLING CLAMP 1 6
13 MK260E-EXC HEAT EXCHANGER 3
12 M-OSO-2400 OIL SEPARATOR ORING 1
11 M-CCP-6000 CONDUIT FOR CONTROL PANEL 5
CAPACITY

MK-210 US 2350 SCFM

MK-210 US 2350 SCFM
MK-210 US 2350 SCFM

10 MK260E-BLT630 BOLT M6x30 58

09 M-NUT-6000 CAGE NUT M6 58
08 MK210E-CRP CONDENSER REINFORCEMENT PLATE 1
07 MK210E-FPRT FAN PROTECTOR 1
06 MK260E-BLT830 BOLT M8x30 8
05 M-OSE-2400 OIL SEPARATOR ELEMENT 1
04 SEE.REF TABLE FAN MOTOR 2
03 M-OSP-2400 OIL SEPARATOR 1
DECAL

02 MK210E-CON CONDANSER 1
01 MK210E-CAB CABINET BASE 1
DWG ITEM
NO. PART NO SPARE PART CODE REV QTY
SIZE
PART LIST

Page 127
 4 6
82
99

Page 128
100

9
10
91

11 7
93
97
90
92

101

102 96 2

18
89
MK-US 2750

94 20
8
98
8.1 - ED & Spare Part List

33
3

24 5 61
95
9 60
45
10
60
17 19 104 14
30
105 21
40 15
12
27

23
25
44 28 43
42 26

42
84 31
16
41 58

47 13

48 59

34 46

35 22

55
32
83
38
84
33
49
37
73 81
71 12

62
103 87 64
87
36 11
86 72
67 32
88 56
75 55
74 68
57 52
69
76 39 29
77
54 50
78
1 53 51
79 66

80 65
85
 105 M-OSO-5000 OIL SEPARATOR ORING 1
104 M-OSE-5000 OIL SEPARATOR ELEMENT 1

M-TRF-6000-575-3-60
103 MK230E-ASF ASTROFLEX 1
102 MK260E-HPG HIGH PRESSURE GAUGE 1
101 MK260E-LPG LOW PRESSURE GAUGE 1

TRANSFORMER
100 M-FAS-6000 CABINET FASTENER 28
99 MK220E-CAT1 CABINET TOP1 2

MK260E-TRF
M-TRF-1600
98 MK230E-CPS CABINET POST SECONDARY SIDE 4

78
97 M-CHN-6000 CABINET HANDLE 14
96 MK230E-CRS CABINET REAR SIDE BOTTOM 3
95 MK230E-CSB2-US CABINET SIDE BOTTOM2 1
94 MK230E-CSB1 CABINET REAR BOTTOM1 1
93 MK230E-CRT-US CABINET REAR TOP 1
92 MK230E-CRS CABINET REAR SIDE BOTTOM 2
91 MK230E-CST CABINET SIDE TOP 6
90 MK230E-CFT CABINET FRONT TOP 1
89 MK230E-CFB CABINET FRONT BOTTOM 1

M-CMP-3000-460-3-60
M-CMP-3000-460-3-60
M-CMP-3000-575-3-60
88 MK260E-MSW MAIN SWITCH 1
87 MK260E-ESD3 ESD3 CONTROLLER 1
COMPRESSOR

86 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1

85 MK230E-CAL2 CABINET LEG2 1
84 MK230E-CAL1 CABINET LEG1 3
83 MK260E-CCP2 CUPPER CLAMP2 2
34

82 M-STU-6000 CABINET STUD AND NUT 28

81 MK260E-RSV ROTOLOCK SERVICE VALVE 1
80 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
79 M-PPR-6000 PHASE PROTECTION RELAY 1
78 SEE.REF TABLE TRANSFORMER 1
77 M-CNT-3000 COMPRESSOR CONTACTOR 1
76 M-CNT-MP FAN CONTACTOR 2
75 M-PWC-3800 POWER CONNECTOR 4
74 M-COP-3000 COMPRESSOR OVERLOAD PROTECTOR 1
73 MK230E-RTA6 ROTOLOCK VALVE6 1
72 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
71 M-CPF-6000-O 1/4 90* ORIFICE CUPPER PIPE FITTING 1
70 N/A N/A -
M-FMT-6000-460-3-60
M-FMT-6000-460-3-60
M-FMT-6000-575-3-60

69 M-FNS-0200 FAN ON/OFF SWITCH 1

68 M-HPS-0200 HIGH PRESSURE SWITCH 1
67 MK260E-LPS LOW PRESSURE SWICH 1
66 MK260E-HNG HINGE 3
FAN MOTOR

65 MK260E-DLK DOOR LOCK 3

64 MK260E-SCF SWITCH CONNECTION FITTING 3
4

63 N/A N/A -
62 MK250E-ELB-US ELECTRICAL BOX 1
61 M-BYV-6000 BY PASS VALVE 1
60 MK260E-GBV BALL VALVE 3
59 MK260E-FTS FLAT FITTINGS 4
58 M-SCF-6000 SENSOR CONNECTION FITTING 1
57 MK260E-MAS MANSON 1/2" 5
56 MK260E-T14 ELBOW FITTINGS T 1/4" 2
55 M-DBV-6000 DRAIN BALL VALVE 7
54 M-MMV-6000 MEMBRAN VALVE 3
AIR COOLED
AIR COOLED
AIR COOLED

53 MK260E-MBC2 MANIFOLD BLIND CAP2 1

COOLING

52 MK260E-MBC1 MANIFOLD BLIND CAP1 3

51 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1
50 MK230E-DRM DRAIN MANIFOLD 1
49 M-SLV-6000-24 SOLENOID VALVE 1
48 MK260E-DSTK DISTRIBUTOR CLAMP 1
47 MK230E-DST DISTRIBUTOR 1
46 M-EXV-3000 EXPANSION VALVE 1
45 M-OSP-5000 OIL SEPERATOR 1
44 M-DRI-6000 DRYER-DEHYDRATOR 1
43 M-DIS-6000 DRIER SEAL 1
42 MK160E-RTA2 ROTOLOCK ADAPTOR2 2
POWER RATINGS

41 MK250E-RCV LIQUID RECEIVER 1

40 MK230E-SPR SEPERATOR 1
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

39 M-MMM-6000 MEMBRANE 3
38 MK260E-BLT850 BOLT M8x50 12
37 MK260E-WHR22 WASHER 22x8,2x2,4 12
36 M-COP-0325 FAN OVERLOAD PROTECTOR 2
35 MK230E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
34 SEE.REF TABLE COMPRESSOR 1
33 MK260E-SVC SOLENOID VALVE COIL 2
32 MK260E-EWF1 ELBOW FITTINGS1 8
31 MK260E-CCP1 CUPPER CLAMP1 1
30 MK260E-SVT SETTING VALVE T 1
29 MK260E-DRS-NPT DRAIN SLEEVE 1
28 M-DIE-6000 DRIER ELEMENT 1
DRYER PART NUMBER

27 MK260E-RTA4 ROTOLOCK ADAPTOR4 2

26 MK260E-RTA3 ROTOLOCK ADAPTOR3 4
25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
MK250E-ASF ASTROFLEX 1
MKUS-2750
MKUS-2750
MKUS-2750

24
23 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 4
22 MK250E-CPG4 COUPLING CLAMP 4 2
21 MK260E-BLV BALL VALVE 1
8.1 - ED & Spare Part List

20 MK240E-CPG3-UL COUPLING CLAMP 3 2

19 MK250E-RTA5 ROTALOCK VALVE ADAPTOR 1
18 MK250E-CPG2 COUPLING CLAMP 2 8
17 MK260E-RTA3 ROTOLOCK ADAPTOR3 2
MK-US 2750

16 MK230E-CLLB COLLECTOR BOTTOM 1

15 MK230E-CLLT COLLECTOR TOP 1
14 MK260E-CPG1 COUPLING CLAMP 1 8
13 MK260E-EXC HEAT EXCHANGER 4
12 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 3
CAPACITY

MK-220 US 2750 SCFM

MK-220 US 2750 SCFM
MK-220 US 2750 SCFM

11 M-CCP-6000 CONDUIT FOR CONTROL PANEL 12

10 MK260E-BLT630 BOLT M6x30 60
09 M-NUT-6000 CAGE NUT M6 60
08 MK220E-CRP CONDENSER REINFORCEMENT PLATE 1
07 MK220E-FPRT FAN PROTECTOR 1
06 MK260E-BLT830 BOLT M8x30 8
05 MK260E-GBV-1/4 BALL VALVE 1/4 1
04 SEE.REF TABLE FAN MOTOR 2
03 MK260E-BSLV BY BASS SOLENOID VALVE 1
DECAL

02 MK220E-CON CONDANSER 1
01 MK230E-CAB CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 129
 4 6
82
100 99

Page 130
9
10
91

11 7
93
97
90
92

101

102 96 2
18

89
MK-US 3000

20

94
8
98
8.1 - ED & Spare Part List

33
3

24 5 61
95
9 60
45
10
60 14
17 19 104
30
105 15
21
40
12
27

23
25
28 43
44
42 26

42
84 31 58
16
41

47 13

48 59

34 46

35 22

55
32
83
38
84
33
49
37
73 81
71 12

62
103 87 64
87
36 11
86 72
67 32
88 56
75 55
74 68
57 52
69
76 39 29
77
54 50
78
1 53 51
79 66

80 65
85
 105 M-OSO-5000 OIL SEPARATOR ORING 1
104 M-OSE-5000 OIL SEPARATOR ELEMENT 1

M-TRF-6000-575-3-60
103 MK230E-ASF ASTROFLEX 1
102 MK260E-HPG HIGH PRESSURE GAUGE 1
101 MK260E-LPG LOW PRESSURE GAUGE 1

TRANSFORMER
100 M-FAS-6000 CABINET FASTENER 28
99 MK220E-CAT1 CABINET TOP1 2

MK260E-TRF
98

M-TRF-1600
MK230E-CPS CABINET POST SECONDARY SIDE 4

78
97 M-CHN-6000 CABINET HANDLE 14
96 MK230E-CRS CABINET REAR SIDE BOTTOM 3
95 MK230E-CSB2-US CABINET SIDE BOTTOM2 1
94 MK230E-CSB1 CABINET REAR BOTTOM1 1
93 MK230E-CRT-US CABINET REAR TOP 1
92 MK230E-CRS CABINET REAR SIDE BOTTOM 2
91 MK230E-CST CABINET SIDE TOP 6
90 MK230E-CFT CABINET FRONT TOP 1
89 MK230E-CFB CABINET FRONT BOTTOM 1

M-CMP-3000-460-3-60
M-CMP-3000-460-3-60
M-CMP-3000-575-3-60
88 MK260E-MSW MAIN SWITCH 1
87 MK260E-ESD3 ESD3 CONTROLLER 1
COMPRESSOR

86 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1

85 MK230E-CAL2 CABINET LEG2 1
84 MK230E-CAL1 CABINET LEG1 3
83 MK260E-CCP2 CUPPER CLAMP2 2
34

82 M-STU-6000 CABINET STUD AND NUT 28

81 MK260E-RSV ROTOLOCK SERVICE VALVE 1
80 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
79 M-PPR-6000 PHASE PROTECTION RELAY 1
78 SEE.REF TABLE TRANSFORMER 1
77 M-CNT-3000 COMPRESSOR CONTACTOR 1
76 M-CNT-MP FAN CONTACTOR 2
75 M-PWC-3800 POWER CONNECTOR 4
74 M-COP-3000 COMPRESSOR OVERLOAD PROTECTOR 1
73 MK230E-RTA6 ROTOLOCK VALVE6 1
72 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
71 M-CPF-6000-O 1/4 90* ORIFICE CUPPER PIPE FITTING 1
70 N/A N/A -
M-FMT-6000-460-3-60
M-FMT-6000-460-3-60
M-FMT-6000-575-3-60

69 M-FNS-0200 FAN ON/OFF SWITCH 1

68 M-HPS-0200 HIGH PRESSURE SWITCH 1
67 MK260E-LPS LOW PRESSURE SWICH 1
66 MK260E-HNG HINGE 3
FAN MOTOR

65 MK260E-DLK DOOR LOCK 3

64 MK260E-SCF SWITCH CONNECTION FITTING 3
4

63 N/A N/A -
62 MK250E-ELB-US ELECTRICAL BOX 1
61 M-BYV-6000 BY PASS VALVE 1
60 MK260E-GBV BALL VALVE 3
59 MK260E-FTS FLAT FITTINGS 4
58 M-SCF-6000 SENSOR CONNECTION FITTING 1
57 MK260E-MAS MANSON 1/2" 5
56 MK260E-T14 ELBOW FITTINGS T 1/4" 2
55 M-DBV-6000 DRAIN BALL VALVE 10
54 M-MMV-6000 MEMBRAN VALVE 3
AIR COOLED
AIR COOLED
AIR COOLED

53 MK260E-MBC2 MANIFOLD BLIND CAP2 1

COOLING

52 MK260E-MBC1 MANIFOLD BLIND CAP1 3

51 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 1
50 MK230E-DRM DRAIN MANIFOLD 1
49 M-SLV-6000-24 SOLENOID VALVE 1
48 MK260E-DSTK DISTRIBUTOR CLAMP 1
47 MK230E-DST DISTRIBUTOR 1
46 M-EXV-3000 EXPANSION VALVE 1
45 M-OSP-5000 OIL SEPERATOR 1
44 M-DRI-6000 DRYER-DEHYDRATOR 1
43 M-DIS-6000 DRIER SEAL 1
42 MK160E-RTA2 ROTOLOCK ADAPTOR2 2
MK250E-RCV
POWER RATINGS

41 LIQUID RECEIVER 1
40 MK230E-SPR SEPERATOR 1
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

39 M-MMM-6000 MEMBRANE 3
38 MK260E-BLT850 BOLT M8x50 12
37 MK260E-WHR22 WASHER 22x8,2x2,4 12
36 M-COP-0325 FAN OVERLOAD PROTECTOR 2
35 MK230E-CEC COMPRESSOR ELECTRICAL BOX - COVER 1
34 SEE.REF TABLE COMPRESSOR 1
33 MK260E-SVC SOLENOID VALVE COIL 2
32 MK260E-EWF1 ELBOW FITTINGS1 10
31 MK260E-CCP1 CUPPER CLAMP1 1
30 MK260E-SVT SETTING VALVE T 1
29 MK260E-DRS-NPT DRAIN SLEEVE 1
28 M-DIE-6000 DRIER ELEMENT 1
DRYER PART NUMBER

27 MK260E-RTA4 ROTOLOCK ADAPTOR4 2

26 MK260E-RTA3 ROTOLOCK ADAPTOR3 4
25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
24 MK250E-ASF ASTROFLEX 1
MKUS-3000
MKUS-3000
MKUS-3000

23 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 4

22 MK250E-CPG4 COUPLING CLAMP 4 2
21 MK260E-BLV BALL VALVE 1
8.1 - ED & Spare Part List

20 MK240E-CPG3-UL COUPLING CLAMP 3 2

19 MK250E-RTA5 ROTALOCK VALVE ADAPTOR 1
18 MK250E-CPG2 COUPLING CLAMP 2 10
MK260E-RTA3
MK-US 3000

17 ROTOLOCK ADAPTOR3 2
16 MK230E-CLLB COLLECTOR BOTTOM 1
15 MK230E-CLLT COLLECTOR TOP 1
14 MK260E-CPG1 COUPLING CLAMP 1 10
13 MK260E-EXC HEAT EXCHANGER 5
12 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 3
CAPACITY

MK-230 US 3000 SCFM

MK-230 US 3000 SCFM
MK-230 US 3000 SCFM

11 M-CCP-6000 CONDUIT FOR CONTROL PANEL 12

10 MK260E-BLT630 BOLT M6x30 60
09 M-NUT-6000 CAGE NUT M6 60
08 MK220E-CRP CONDENSER REINFORCEMENT PLATE 1
07 MK220E-FPRT FAN PROTECTOR 1
06 MK260E-BLT830 BOLT M8x30 8
05 MK260E-GBV-1/4 BALL VALVE 1/4 1
04 SEE.REF TABLE FAN MOTOR 2
03 MK260E-BSLV BY BASS SOLENOID VALVE 1
DECAL

02 MK220E-CON CONDANSER 1
01 MK230E-CAB CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 131
 4 6

Page 132
94
61
96

95

9
10
7
86 11

92
88
85
2
87 91
97 18

98

84 20
MK-US 3600

8
89
8.1 - ED & Spare Part List

24
51
93 43 58
53 15
9
44 57
10 14
42
90
57
21
30 40 38 39
35
31
36
100

103
99
34
101

33 69 102
12 27 16 55
79 104

13
23
25 56
26

22

41 29
35 28
35

17 19 3
5 37
79
12

24
45
82 59 28
82 62 52 29
81 54 48
70 71
83
60 11
32
65 50 46
72
73 66 49 47
67
74
1
75
76
71
77 64

78 63
80
 104 MK260E-CLP COMPRESSOR LOWER PLATE 1
103 MK260E-CKV CHECK VALVE 2

M-TRF-6000-575-3-60
102 MK260E-RTA7-T ROTOLOCK ADAPTOR7-T 1
101 MK260E-RTA7 ROTOLOCK ADAPTOR7 1
100 MK250E-ASF ASTROFLEX 1

TRANSFORMER
99 MK260E-ASF ASTROFLEX 1
98 MK260E-HPG HIGH PRESSURE GAUGE 1

MK260E-TRF
M-TRF-1600
97 MK260E-LPG LOW PRESSURE GAUGE 1

76
96 M-FAS-6000 CABINET FASTENER 28
95 MK260E-CAT2 CABINET TOP2 1
94 MK250E-CAT1 CABINET TOP1 2
93 MK250E-CPS CABINET POST SECONDARY SIDE 2
92 M-CHN-6000 CABINET HANDLE 12
91 MK250E-CRS CABINET REAR SIDE BOTTOM 2
90 MK250E-CSB2-US CABINET SIDE BOTTOM2 1
89 MK250E-CSB1 CABINET REAR BOTTOM1 1
88 MK250E-CRT-US CABINET REAR TOP 1
M-CMP-2000-460-3-60
M-CMP-2000-460-3-60
M-CMP-2000-575-3-60
87 MK250E-CRS CABINET REAR SIDE BOTTOM 1
86 MK250E-CST CABINET SIDE TOP 4
COMPRESSOR

85 MK250E-CFT CABINET FRONT TOP 1

84 MK250E-CFB CABINET FRONT BOTTOM 1
83 MK260E-MSW MAIN SWITCH 1
82
30

MK260E-ESD3 ESD3 CONTROLLER 1

81 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
80 MK250E-CAL2 CABINET LEG2 1
79 MK250E-CAL1 CABINET LEG1 3
78 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
77 M-PPR-6000 PHASE PROTECTION RELAY 1
76 SEE.REF TABLE TRANSFORMER 1
75 M-CNT-2400 COMPRESSOR CONTACTOR 2
74 M-CNT-MP FAN CONTACTOR 3
73 M-PWC-3800 POWER CONNECTOR 4
72 M-COP-2400 COMPRESSOR OVERLOAD PROTECTION 2
71 M-CCP-6000 CONDUIT FOR CONTROL PANEL 10
70 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
69 MK260E-RTA3 ROTOLOCK ADAPTOR3 2
M-FMT-6000-460-3-60
M-FMT-6000-460-3-60
M-FMT-6000-575-3-60

68 N/A N/A -
67 M-FNS-0200 FAN ON/OFF SWITCH 1
66 M-HPS-0200 HIGH PRESSURE SWITCH 1
FAN MOTOR

65 MK260E-LPS LOW PRESSURE SWICH 1

64 MK260E-HNG HINGE 3
63 MK260E-DLK DOOR LOCK 3
4

62 MK260E-SCF SWITCH CONNECTION FITTING 3

61 M-STU-6000 CABINET STUD AND NUT 28
60 M-MMM-6000 MEMBRANE 4
59 MK250E-ELB-US ELECTRICAL BOX 1
58 M-BYV-6000 BY PASS VALVE 1
57 MK260E-GBV BALL VALVE 3
56 MK260E-FTS FLAT FITTINGS 1
55 M-SCF-6000 SENSOR CONNECTION FITTING 1
54 MK260E-MAS MANSON 1/2" 6
AIR COOLED
AIR COOLED
AIR COOLED

53 MK260E-GBV-1/4 BALL VALVE 1/4 1

52 MK260E-T14
COOLING

ELBOW FITTINGS T 1/4" 3

51 MK260E-BSLV BY BASS SOLENOID VALVE 1
50 M-MMV-6000 MEMBRAN VALVE 4
49 MK260E-MBC2 MANIFOLD BLIND CAP2 1
48 MK260E-MBC1 MANIFOLD BLIND CAP1 5
47 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 2
46 MK250E-DRM DRAIN MANIFOLD 2
45 M-SLV-6000-24 SOLENOID VALVE 1
44 MK260E-DSTK DISTRIBUTOR CLAMP 1
43 MK240E-DST DISTRIBUTOR 1
42 M-EXV-5000 EXPANSION VALVE 1
POWER RATINGS

41 M-OSP-5000 OIL SEPERATOR 1

DRYER-DEHYDRATOR 1
400V/3Ph/50Hz
460V/3Ph/60Hz

40
575V/3Ph/60Hz

M-DRI-6000
39 M-DIS-6000 DRIER SEAL 1
38 M-DIE-6000 DRIER ELEMENT 1
37 MK250E-RCV LIQUID RECEIVER 1
36 MK250E-SPR SEPERATOR 1
35 MK160E-RTA2 ROTOLOCK ADAPTOR2 4
34 MK260E-BLT850 BOLT M8x50 14
33 MK260E-WHR22 WASHER 22x8,2x2,4 14
32 M-FOP-6000 FAN OVERLOAD PROTECTOR 3
31 MK210E-CEC COMPRESSOR ELECTRICAL BOX - COVER 2
30 SEE.REF TABLE COMPRESSOR 2
29 M-DBV-6000 DRAIN BALL VALVE 10
DRYER PART NUMBER

28 MK260E-EWF1 ELBOW FITTINGS1 12

27 M-RTA-5000-T-2 ROTALOCK VALVE "T"ADAPTOR FOR HEAT EXCHANGER 3
26 MK260E-RTA4 ROTOLOCK ADAPTOR4 5
25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
MKUS-3600
MKUS-3600
MKUS-3600

24 MK260E-SVC SOLENOID VALVE COIL 2

23 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 5
22 MK250E-CPG4 COUPLING CLAMP 4 2
21 MK260E-BLV BALL VALVE 1
MK240E-CPG3-UL COUPLING CLAMP 3 2
8.1 - ED & Spare Part List

20
19 MK250E-RTA5 ROTALOCK VALVE ADAPTOR 1
18 MK250E-CPG2 COUPLING CLAMP 2 10
17 MK260E-RTA3 ROTOLOCK ADAPTOR3 1
MK-US 3600

16 MK240E-CLLB COLLECTOR BOTTOM 1

15 MK240E-CLLT COLLECTOR TOP 1
14 MK260E-CPG1 COUPLING CLAMP 1 10
13 MK260E-EXC HEAT EXCHANGER 5
CAPACITY

12 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 6

MK-240 US 3600 SCFM
MK-240 US 3600 SCFM
MK-240 US 3600 SCFM

11 MK260E-DRS-NPT DRAIN SLEEVE 1

10 MK260E-BLT630 BOLT M6x30 58
09 M-NUT-6000 CAGE NUT M6 58
08 MK250E-CRP CONDENSER REINFORCEMENT PLATE 2
07 MK260E-FPRT FAN PROTECTOR 1
06 MK260E-BLT830 BOLT M8x30 12
05 M-OSO-5000 OIL SEPARATOR ORING 1
04 SEE.REF TABLE FAN MOTOR 3
DECAL

03 M-OSE-5000 OIL SEPARATOR ELEMENT 1

02 MK250E-CON CONDANSER 1
01 MK250E-CAB CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 133
 4 6

Page 134
94
61
96

95

9
10
7
86 11

92
88
85
2
87 91
97

98

84
MK-US 4000

18

8
89 20
8.1 - ED & Spare Part List

24
51
93 43 58
53
9
44 57
42 10
90 35
35
57
30 40 38 39
35 15
31 37
36 14
100

103
99
34 21
101
105
33 69 102 27
12
79 104

23
25
16 55
26

41
13

3 56
17 19
5
79
12 22

29
28 24
45

82 59
82 62
81 28
70 71
83 52 29
32 54 48
65
72 60 11
73 66
46
67
74
50 47
1
75
76 49
71
77 64

78 63
80
 105 MK250E-RDN REDUCTION 2
104 MK260E-CLP COMPRESSOR LOWER PLATE 1

M-TRF-6000-575-3-60
103 MK260E-CKV CHECK VALVE 2
102 MK260E-RTA7-T ROTOLOCK ADAPTOR7-T 1
101

TRANSFORMER
MK260E-RTA7 ROTOLOCK ADAPTOR7 1
100 MK250E-ASF ASTROFLEX 1
99

MK260E-TRF
MK260E-ASF ASTROFLEX 1

M-TRF-1600
98 MK260E-HPG HIGH PRESSURE GAUGE 1

76
97 MK260E-LPG LOW PRESSURE GAUGE 1
96 M-FAS-6000 CABINET FASTENER 28
95 MK260E-CAT2 CABINET TOP2 1
94 MK250E-CAT1 CABINET TOP1 2
93 MK250E-CPS CABINET POST SECONDARY SIDE 2
92 M-CHN-6000 CABINET HANDLE 12
91 MK250E-CRS CABINET REAR SIDE BOTTOM 2
90 MK250E-CSB2-US CABINET SIDE BOTTOM2 1
89 MK250E-CSB1 CABINET REAR BOTTOM1 1

M-CMP-2000-460-3-60
M-CMP-2000-460-3-60
M-CMP-2000-575-3-60
88 MK250E-CRT-US CABINET REAR TOP 1
87 MK250E-CRS CABINET REAR SIDE BOTTOM 1
COMPRESSOR

86 MK250E-CST CABINET SIDE TOP 4

85 MK250E-CFT CABINET FRONT TOP 1
84 MK250E-CFB CABINET FRONT BOTTOM 1
83 MK260E-MSW MAIN SWITCH 1
30

82 MK260E-ESD3 ESD3 CONTROLLER 1

81 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
80 MK250E-CAL2 CABINET LEG2 1
79 MK250E-CAL1 CABINET LEG1 3
78 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
77 M-PPR-6000 PHASE PROTECTION RELAY 1
76 SEE.REF TABLE TRANSFORMER 1
75 M-CNT-2400 COMPRESSOR CONTACTOR 2
74 M-CNT-MP FAN CONTACTOR 3
73 M-PWC-3800 POWER CONNECTOR 4
72 M-COP-2400 COMPRESSOR OVERLOAD PROTECTION 2
71 M-CCP-6000 CONDUIT FOR CONTROL PANEL 10
70 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
M-FMT-6000-460-3-60
M-FMT-6000-460-3-60
M-FMT-6000-575-3-60

69 MK260E-RTA3 ROTOLOCK ADAPTOR3 2

68 N/A N/A -
67 M-FNS-0200 FAN ON/OFF SWITCH 1
HIGH PRESSURE SWITCH
FAN MOTOR

66 M-HPS-0200 1
65 MK260E-LPS LOW PRESSURE SWICH 1
64 MK260E-HNG HINGE 3
4

63 MK260E-DLK DOOR LOCK 3

62 MK260E-SCF SWITCH CONNECTION FITTING 3
61 M-STU-6000 CABINET STUD AND NUT 28
60 M-MMM-6000 MEMBRANE 5
59 MK250E-ELB-US ELECTRICAL BOX 1
58 M-BYV-6000 BY PASS VALVE 1
57 MK260E-GBV BALL VALVE 3
56 MK260E-FTS FLAT FITTINGS 1
55 M-SCF-6000 SENSOR CONNECTION FITTING 1
54 MK260E-MAS MANSON 1/2" 8
AIR COOLED
AIR COOLED
AIR COOLED

53 MK260E-GBV-1/4 BALL VALVE 1/4 1

COOLING

52 MK260E-T14 ELBOW FITTINGS T 1/4" 4

51 MK260E-BSLV BY BASS SOLENOID VALVE 1
50 M-MMV-6000 MEMBRAN VALVE 5
49 MK260E-MBC2 MANIFOLD BLIND CAP2 1
48 MK260E-MBC1 MANIFOLD BLIND CAP1 5
47 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 2
46 MK250E-DRM DRAIN MANIFOLD 2
45 M-SLV-6000-24 SOLENOID VALVE 1
44 MK260E-DSTK DISTRIBUTOR CLAMP 1
43 MK240E-DST DISTRIBUTOR 1
42 M-EXV-5000 EXPANSION VALVE 1
POWER RATINGS

41 M-OSP-5000 OIL SEPERATOR 1

400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

40 M-DRI-6000 DRYER-DEHYDRATOR 1
39 M-DIS-6000 DRIER SEAL 1
38 M-DIE-6000 DRIER ELEMENT 1
37 MK250E-RCV LIQUID RECEIVER 1
36 MK250E-SPR SEPERATOR 1
35 MK160E-RTA2 ROTOLOCK ADAPTOR2 4
34 MK260E-BLT850 BOLT M8x50 14
33 MK260E-WHR22 WASHER 22x8,2x2,4 14
32 M-FOP-6000 FAN OVERLOAD PROTECTOR 3
31 MK210E-CEC COMPRESSOR ELECTRICAL BOX - COVER 2
30 SEE.REF TABLE COMPRESSOR 2
29 M-DBV-6000 DRAIN BALL VALVE 12
DRYER PART NUMBER

28 MK260E-EWF1 ELBOW FITTINGS1 13

27 M-RTA-5000-T-2 ROTALOCK VALVE "T"ADAPTOR FOR HEAT EXCHANGER 3
26 MK260E-RTA4 ROTOLOCK ADAPTOR4 5
25 M-RTA-5000-2 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 2
MKUS-4000
MKUS-4000
MKUS-4000

24 MK260E-SVC SOLENOID VALVE COIL 2

23 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 5
22 MK250E-CPG4 COUPLING CLAMP 4 2
8.1 - ED & Spare Part List

21 MK260E-BLV BALL VALVE 1

20 MK260E-CPG3-UL COUPLING CLAMP 3 2
19 MK250E-RTA5 ROTALOCK VALVE ADAPTOR 1
18 MK250E-CPG2 COUPLING CLAMP 2 12
MK-US 4000

17 MK260E-RTA3 ROTOLOCK ADAPTOR3 1

16 MK250E-CLLB COLLECTOR BOTTOM 1
15 MK250E-CLLT COLLECTOR TOP 1
14 MK260E-CPG1 COUPLING CLAMP 1 12
13 MK260E-EXC HEAT EXCHANGER 6
12 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 6
CAPACITY

MK-250 US 4000 SCFM

MK-250 US 4000 SCFM
MK-250 US 4000 SCFM

11 MK260E-DRS-NPT DRAIN SLEEVE 1

10 MK260E-BLT630 BOLT M6x30 58
09 M-NUT-6000 CAGE NUT M6 58
08 MK250E-CRP CONDENSER REINFORCEMENT PLATE 2
07 MK260E-FPRT FAN PROTECTOR 1
06 MK260E-BLT830 BOLT M8x30 12
05 M-OSO-5000 OIL SEPARATOR ORING 1
04 SEE.REF TABLE FAN MOTOR 3
03 M-OSE-5000 OIL SEPARATOR ELEMENT 1
DECAL

02 MK250E-CON CONDANSER 1
01 MK250E-CAB CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 135
 3 4

Page 136
99
102
101
100

8
96
89

94
91
87 106 5

88 98
90 107

95
MK-US 5000

86
2

93
8.1 - ED & Spare Part List

59
42
40 41

92
97 6

38
9
103
31 104
11
33 71 60
10
59
26 7
43
8
55 59
25
36 17 105
62
37
63
35 17 34 28
19 18
19 20
81 32

103
47

24

45
27
46

44 15
22
14

11 11

21

23

39
84

83 57
85 16

12
81

84 61
13
64
58
1
72
67 29
73 54 30
68 56
74 30
82 75 50
69 29
53 108
76
12 48
77
52
78 49
51
66
79
65
80
 108 MK260E-DRS-NPT DRAIN SLEEVE 1
107 MK260E-HPG HIGH PRESSURE GAUGE 1

M-TRF-6000-575-3-60
106 MK260E-LPG LOW PRESSURE GAUGE 1
105 MK250E-RTA5 ROTALOCK VALVE ADAPTOR 1
104 MK260E-BSLV BY BASS SOLENOID VALVE 1

TRANSFORMER
103 MK260E-SVC SOLENOID VALVE COIL 2
102 M-STU-6000 CABINET STUD AND NUT 34

MK260E-TRF
M-TRF-1600
101 M-FAS-6000 CABINET FASTENER 34

76 100
99
MK260E-CAT2-US
MK260E-CAT1-US
CABINET TOP2
CABINET TOP1
1
2
98 MK260E-CRS2-US CABINET REAR SIDE BOTTOM2 3
97 MK260E-CBR-US CABINET BACK BOTTOM RIGHT 1
96 MK260E-CNR CABINET BACK TOP RIGHT 1
95 MK260E-CBB-US CABINET LEFT BOTTOM BACK 1
94 MK260E-CLB-US CABINET LEFT TOP BACK 1
93 MK260E-CPS-US CABINET POST SECONDARY SIDE 6
92 MK260E-CSB2-US CABINET SIDE BOTTOM2 1
91
M-CMP-2400-460-3-60
M-CMP-2400-460-3-60
M-CMP-2400-575-3-60
M-CHN-6000 CABINET HANDLE 15
90 MK260E-CRS1-US CABINET REAR SIDE BOTTOM1 2
COMPRESSOR

89 MK260E-CST-US CABINET SIDE TOP 6

88 MK260E-CGT-US CABINET FRONT RIGHT TOP 1
87 MK260E-CLT-US CABINET FRONT LEFT TOP 1
86 MK260E-CFB-US CABINET FRONT BOTTOM 1
31

85 MK260E-MSW MAIN SWITCH 1

84 MK260E-ESD3 ESD3 CONTROLLER 1
83 MK260E-PCP-ESD3 PLASTIC CONTROL PANEL 1
82 MK260E-CAL2-US CABINET LEG2 1
81 MK260E-CAL1-US CABINET LEG1 3
80 M-FHH-6000 HIGH VOLTAGE FUSE HOLDER 4
79 M-PPR-6000 PHASE PROTECTION RELAY 1
78 SEE.REF TABLE TRANSFORMER 1
77 M-CNT-2400 COMPRESSOR CONTACTOR 2
76 M-CNT-MP FAN CONTACTOR 3
75 M-PWC-3800 POWER CONNECTOR 4
74 M-COP-2400 COMPRESSOR OVERLOAD PROTECTOR 2
73 M-FOP-6000 FAN OVERLOAD PROTECTOR 3
72 M-FHL-6000 LOW VOLTAGE FUSE HOLDER 1
M-FMT-6000-460-3-60
M-FMT-6000-460-3-60
M-FMT-6000-575-3-60

71 MK260E-GBV-1/4 BALL VALVE 1/4 1

70 N/A N/A -
69 M-FNS-0200 FAN ON/OFF SWITCH 1
68 M-HPS-0200 1
FAN MOTOR

HIGH PRESSURE SWITCH

67 MK260E-LPS LOW PRESSURE SWICH 1
66 MK260E-HNG HINGE 3
3

65 MK260E-DLK DOOR LOCK 3

64 MK260E-SCF SWITCH CONNECTION FITTING 3
63 M-OSO-5000 OIL SEPARATOR ORING 1
62 M-OSE-5000 OIL SEPARATOR ELEMENT 1
61 MK260E-ELB-US ELECTRICAL BOX 1
60 M-BYV-6000 BY PASS VALVE 1
59 MK260E-GBV BALL VALVE 3
58 MK260E-FTS FLAT FITTINGS 1
57 M-SCF-6000 SENSOR HOLDER 1
56 MK260E-MAS MANSON 1/2" 6
AIR COOLED
AIR COOLED
AIR COOLED

55 MK260E-CKV CHECK VALVE 2

54 MK260E-T14 ELBOW FITTINGS T 1/4" 4
COOLING

53 M-MMM-6000 MEMBRANE 5
52 M-MMV-6000 MEMBRAN VALVE 5
51 MK260E-MBC2 MANIFOLD BLIND CAP2 1
50 MK260E-MBC1 MANIFOLD BLIND CAP1 5
49 MK260E-MRS MANIFOLD REINFORCEMENT SHEET METAL 2
48 MK260E-DRM DRAIN MANIFOLD 2
47 M-SLV-6000-24 SOLENOID VALVE 1
46 MK260E-DSTK DISTRIBUTOR CLAMP 1
45 MK260E-DST DISTRIBUTOR 1
44 MK260E-EXV EXPANSION VALVE 1
43 M-OSP-5000 OIL SEPARATOR 1
POWER RATINGS

42 M-DRI-6000 DRYER-DEHYDRATOR 1
400V/3Ph/50Hz
460V/3Ph/60Hz
575V/3Ph/60Hz

41 M-DIS-6000 DRIER SEAL 1

40 M-DIE-6000 DRIER ELEMENT 1
39 MK260E-RCV LIQUID RECEIVER 2
38 MK260E-SPR SEPERATOR 1
37 MK260E-RTA7 ROTOLOCK ADAPTOR7 1
36 MK260E-BLT850 BOLT M8x50 16
35 MK260E-WHR22 WASHER 22x8,2x2,4 16
34 MK260E-RTA7-T ROTOLOCK ADAPTOR7-T 1
33 MK210E-CEC COMPRESSOR ELECTRICAL BOX - COVER 2
32 MK260E-CLP COMPRESSOR LOWER PLATE 1
31 SEE.REF TABLE COMPRESSOR 2
30 M-DBV-6000 DRAIN BALL VALVE 14
DRYER PART NUMBER

29 MK260E-EWF1 ELBOW FITTINGS1 15

28 MK260E-RTA5-T ROTOLOCK ADAPTOR5-T 5
27 MK260E-RTA4 ROTOLOCK ADAPTOR4 7
26 MK250E-ASF ASTROFLEX 1
25 MK260E-ASF ASTROFLEX 1
MKUS-5000
MKUS-5000
MKUS-5000

24 M-RTA-5000-1 ROTALOCK VALVE ADAPTOR FOR HEAT EXCHANGER 9

23 MK260E-CPC COUPLING COVER 2
22 MK260E-CPG4 COUPLING CLAMP 4 2
8.1 - ED & Spare Part List

21 MK260E-BLV BALL VALVE 1

20 MK260E-CPG3-UL COUPLING CLAMP 3 2
19 M-CPF-6000-90 1/4 90* ORIFICE CUPPER PIPE FITTING 6
MK-US 5000

18 MK260E-CPG2 COUPLING CLAMP 2 14

17 MK260E-RTA3 ROTOLOCK ADAPTOR3 3
16 MK260E-CLLB COLLECTOR BOTTOM 1
15 MK260E-CLLT COLLECTOR TOP 1
14 MK260E-CPG1 COUPLING CLAMP 1 14
13 MK260E-EXC HEAT EXCHANGER 7
CAPACITY

MK-260 US 5000 SCFM

MK-260 US 5000 SCFM
MK-260 US 5000 SCFM

12 M-CCP-6000 CONDUIT FOR CONTROL PANEL 8

11 MK160E-RTA2 ROTOLOCK ADAPTOR2 6
10 MK260E-CPS CONDENSER LOWER PLATE SUPPORT 2
09 MK260E-CSA CONDENSER SUPPORT ADDITIONAL 2
08 MK260E-BLT630 BOLT M6x30 70
07 M-NUT-6000 CAGE NUT M6 70
06 MK260E-CRP CONDENSER REINFORCEMENT PLATE 2
05 MK260E-FPRT FAN PROTECTOR 1
04 MK260E-BLT830 BOLT M8x30 24
03 SEE.REF TABLE FAN MOTOR 6
DECAL

02 MK260E-CON CONDANSER 1
01 MK260E-CAB CABINET BASE 1
DWG ITEM
PART NO SPARE PART CODE REV QTY
SIZE NO.
PART LIST

Page 137
 9. COMPONENTS LOCATION

All main components located into dryer identified with labels as listed here under.
CAUTION: Due to manufacture design, some components out of the list are not installed into the dryer.

Electrical components:
Accessories :
A01: Control circuit transformer
A02: Power circuit transformer
A10: ON warning light
A11: OFF warning light
A20: Drain solenoid valve
A30: Cranckase heater
A31: Electrical resistor
A40: Electrical capacity
EV3 Digital Controller (Digi-Pro)
A50-3: Energy saving device 3 (ESD3)

Relays :
K01: Compressor motor relay
K10: Fan motor relay
K20: Drain timer or Bekomat (optional)
K30: Temperature Controller

Switches :
S01: Main switch
S02: Start push button
S03: Stop push button
S10: Fan pressure control
S11: High-low pressure security control
S12: High pressure security control
S13: Low pressure security control
S20: Refrigerant temperature control
S21: Air temperature control

Motors :
M01: Refrigerant compressor motor
M10: Fan motor

Thermal protections :
P01: Refrigerant compressor thermal overload
P10: Fan motor thermal overload

Fuses protections :
See complete identification into electrical sketch included in dryer

F--: Transformer protection

F--: Fan protection
F--: Compressor relay protection
F--: Transformer protection
F--: Drain protection
F--: Fan relay protection

Refrigerant components:
G01: Liquid receiver
G02: Refrigerant drier
G03: Expansion valve
G04: Liquid separator
G05: Hot gas bypass valve
G06: Refrigerant solenoid valve
G10: Water cooled condenser
G11: Water control valve
G20: Refrigerant evaporating pressure gauge
G21: Refrigerant evaporating temperature gauge

Compressed air components :

H01: Air inlet prefilter
H11: Drain filter
H12: Pneumatic drain valve

Terminal boxes:
B01: Main terminal box
B11: Refrigeranbt unit termal box
B12: Free of potential terminal box

Page 138
Problem Possible Cause Repair Comments

Dryer is The connection has Invert two phases 3-phase dryers are equipped with a phase controller
switched on, inverted phases to avoid the fans from turning in the opposite
indicator light direction.
is lit but the
refrigerant Refrigeration unit is not Check refrigeration comp- Several factors can cause compressor failure.
compressor functioning ressor A qualified refrigeration technician needs to check
does not turn on. all the electrical and refrigerant circuit and controls.
The refrigerant highpressure The refrigerant safety high The dryer is protected against excessively high
protection has tripped pressure switch has tripped. refrigerant pressure. If the condenser efficiency has
reduced, the switch will trip. Manually reset the
In case of water cooled con-
switch.
densers, check the water
control valve
Excessive ambient tempe- Be sure that dryer is working A high ambient temperature may cause the
rature in temperatures lower than refrigerant system to operate at higher than normal
the pressures. Results will be higher than normal
design conditions. evaporator temperature.
Designed conditions and lmportant: adequate air circulation around the dryer,
correction factors are desc- and proper ventilation in the equipment room should
ribed guarantee a low enough ambient temperature.
in this manual.
Dryer is Excessive temperature on Allow time to compressor to Compressor is protected against overly high
switched on, crankcase of compressor. cool down. Reason may be a temperatures of the crankcase by a thermal switch.
but the refrigerant possible incorrect adjustment
compressor of hot gas bypass valve or
does not turn on. shortage of refrigerant
Excessive compressed Be sure that dryer is working The dryer is designed for working in calculated
air inlet temperature. in temperatures lower than conditions (see description in this manual).
design conditions. If conditions are exceeded, the dryer will be
overflowed, dew point will go up and protecting
devices can switch off.
Clogged condenser fins or Clear fins or water condenser The clogged fins in the condenser will restrict the
clogged water condenser. of all obstructions. air passage and reduce the refrigeration capacity,
Possible high crankcase causing high temperature in the evaporator.
temperature Same will occur if water condenser is clogged with
Possible loss of phase mud or dirt. Air condenser and water condenser
Possible low voltage causing should be periodically checked and cleaned.
overload trip Possible failed Protect water circuit by an adapted filter.
compressor
Too much compressed air Check actual flow This dryer is designed for a maximum air flow at
flow. through the dryer. design conditions. If too much air is pumped
into the dryer, water removal capacity may not be
sufficient, resulting in liquid carryover down stream.
Check the rated output the air compressor.
Faulty electrical wiring Inspect the circuit The compressor-on light should be wired into the
refrigerant compressor circuit. See wiring diagrams
in this manual.
One electrical protection Reset the protection or The dryer is protected against high amp draw by
has tripped. replace the blown fuse. fuse and/or overload relay that can trip in case of
need. Reset or replace fuse once, but do not persist
if it trips again, request assistance from a qualified
refrigeration contractor.
Dryer is switched Fan has to run if refrigerant Check that compressed air Fan operates automatically to keep refrigerant
on but fan is not high flows through the dryer. pressure below the maximum value. The fan can
running. pressure reaches upper set Check stop if pressure is under the recommended setting.
point. that fan blades are free to
move.
Check the fan pressure
switch.

When compressor Compressor is slugging Be sure the pre-heating Refrigerant may move between receivers when
starts, it vibrates liquid refrigerant period refrigerant compressor is stopped and not heated,
a lot and makes at start up. of at least 2 hours is especially if stopped for a long time.
mechanical noise. respected This migration may cause liquid shock (slugging) in
valves specially on large dryers containing more
refrigerant

Page 139
 Problem Possible Cause Repair Comments

Water in system Compressed Air Inlet and Check inlet and outlet This dryer is designed for air flow in one direction only. Inlet and
outlet connections are connections. outlet directions are identified on the dryer.
reversed.
Drain system is clogged Restore a free flow of Drain system is timed solenoid valve, pneumatically assisted which
or inoperative. water condensate. Check has to be adjusted in accordance with values listed in this
water evacuation. manual. The Solenoid valve includes a strainer that has to be
periodically checked and cleaned. Membranes of pneumatically
assisted drain have to be checked or replaced every 6 months.
Bypass system is open Check the valves Important: Bypass piping should be installed around the
dryer so the dryer can be isolated for service without
shutting down the air supply. During dryer operation, valves
must be set so all air goes into the system. Check tightness of the
bypass system.

Free moisture remains in pipe Blow out the system Before the dryer is first started all free moisture should be
lines. blown out of the system.
Excessive air flow Check actual flow This dryer is designed for a maximum air flow. If too much air is
through the dryer. pumped into the dryer, water removal capacity may not be
sufficient, resultingin liquid Carry over downstream. Check the
rated flow of the air compressor .
Excessive free moisture Check the separator and In some system there may be an accumulation of free moisture in
drain system and the line ahead of the dryer. If this moisture is pumped into the
compressor after cooler dryer intermittently, the water removal capacity may not be
ahead of the dryer. sufficient. A water separator should be installed in the line
before the dryer.
Excessive compressed Be sure that dryer is wor- The dryer is designed to work for calculated design conditions.
air inlet temperature. king lower than design Should the conditions be exceeded, the dryer will be overflowed,
conditions dew point will go up and protecting devices can switch off.
Clogged condenser fins Clear fins of all obstru- The clogged fins in the condenser will restrict air passage and
ctions reduce refrigerant capacity causing water downstream. Fins
should be periodically checked and cleaned.
Shortage of refrigerant Fix the leak and add a Loss of refrigerant will cause improper functioning. A qualified,
charge of refrigerant. refrigeration specialist should perform the necessary repairs, or
factory should be contacted if the unit is in warranty.
Refrigeration system is Check to be certain To check if the compressor is running, check compressor-on light.
not functioning refrigerant lt is possible for the fan to be operating but not the compressor.
compressor is running Compressor not running can be caused by several taeters.
A qualified refrigeration technician should check all refrigerant and
electrical controls
Excessive pressure dew point Readjust refrigerant The refrigerant pressure adjustment should be done by a qu-
evaporating pressure alified refrigeration engineer. This is a very sensitiye device and
incorrect settings may create other failures.
High Excessive compressed Check actual pressure and This dryer is designed for a maximum air flow. If too much air
pressure air flow or too law air inlet flow through the dryer. is pumped into the dryer, water removal capacity may not be
drop pressure. sufficient, resulting in liquid carry-over downstream.
Check the rated flow of the air compressor.
Freeze up Check that compressor Frosting of the Iines is an indication that controls are set too low.
room The following should be done by an experienced
ambient, refrigeration technician.
Fan switch could have
Controls may be adjusted in the fields by means of the hot gas
failed in closed position
bypass valve. This is to be done by a qualified refrigerant tech-
keeping fan on.
nician.
The unit will not Clogged heat exchanger Clean heat exchanger Dryer are supposed to be used with compressed air free of any
run or cycles off with areverse air flow. aggressive contaminants. Some contamination may require extra
and on. maintenance of the heat exchanger.

Line disconnect switch is Close the start or If the dryer is not operating, check the disconnect switch or circuit
open. disconnect switch. breaker to be certain it is on.
Fuse or breaker is open Replace fuse or reset The fuse to the power line should be checked and replaced if nee-
breaker. ded. Never replace a burnt fuse with an oversized fuse.
Faulty refrigerant Determine the cause and Failure of compressor to run may be caused by several
compressor or controls. make factors. A qualified refrigeration specialist should check all
correction electrical and refrigeration controls, or factory should be
contacted if unit is in warranty.
Excessive compressed air Design conditions and The dryer is designed for working into calculated design
inlet temperature. correction conditions. Should the conditions be exceeded, the dryer will be
factors are described in overflowed, dew point will go up and protecting devices may trip.
this manual.
Be sure that dryer is
working
in ambient temperatures
below design conditions.

Page 140
Problem Possible Cause Repair Comments

The unit will not Excessive ambient Designed conditions and cor- A high ambient temperature may cause the refrigerant
run or cycles off temperature rection factors are described system to operate at higher than normal pressures.
and on. in dryer . Be sure that dryer is Results will be a higher than normal evaporator
working lower than design temperature. Important: there should be adequate air
conditions. circulation around the dryer, and proper ventilation in
the equipment room should guarantee a low enough
ambient temperature.
Clogged condenser fins Clear fins of all obstructions. The clogged fins in the condenser will restrict the air
passage and reduce the refrigeration capacity,
causing high temperature in the evaporator.
Fins should be periodically checked and cleaned.
Shortage of refrigerant Fix the leak and add a charge Loss of refrigerant will cause improper functioning.
of refrigerant. Dryers are equipped with a temperature switch which
maintains the amount of refrigerant to maintain
proper cooling of the compressor.
A shortage of refrigerant may cause suction line to
become very hot, causing the temperature switch
to trip. A qualified refrigeration specialist should
perform the necessary repairs.
Error sign occurs The dew point is too low Check refrigerant gas and make If there is not enough refrigerant gas or if the working
on digital temperature or too high sure that the working conditions temperature and inlet temperatures are very high,
control device are within the correct range. the dew point will increase.
Drain Failure Back pressure or Back First of all replace the Max drain hose length after the dryer
reduction of drain port. drain / drains. Open drain to must not exceed 10 meters.
atmosphere (no back pressure)
Max drain hose height from the dryer
- if hose / pipe is used to carry
must not exceed 3 meters.
the drain somewhere else;
keep or enlarge the diameter. The drain port size should not be reduced.

There should not be any fitting that may cause

pressure drop such as valves, elbow, tees, etc.
on the drain connection.
Drain should be at atmospheric pressure at all times.
Any back pressure will result in failure
and malfunction.

Refrigerated Dryer (MK-US)

WARRANTY POLICY

When used under the conditions recommended by the manufacturer Mikropor, MK-US Dryer is warranted
to be free from defects in material and workmanship for a period of twenty-four (24) months from date
of receipt, not to exceed thirty (30) months from the factory ship date, provided Mikropor is furnished the
customer’s name, address, and date of shipment information.

The heat exchanger will be warranted for two (2) years. This warranty is limited to the replacement of the
heat exchangers, F.O.B. Factory, and subject to the same restrictions as outlined below concerning
misuse, abuse or accident. The standard equipment external float drain and optional automatic drain carry
a 90-day warranty. This warranty will apply to equipment installed, operated and maintained in
accordance with the procedures and recommendations as outlined in the owner’s manual published by
Mikropor during the life of this warranty, Mikropor will repair or replace (at Mikropor option) any defective
part or assembly free of charge F.O.B. its warehouse if such defect occurred in normal service and was not
due to apparent misuse, abuse or accident. This Warranty is not transferable. Any warranty service
performed in the field must be authorized by Mikropor Unauthorized service voids the warranty and
any resulting charges will not be paid by Mikropor. Mikropor makes no other warranties or guarantees,
expressed or implied. The merchantability of the components is expressly excluded. The manufacturer
assumes no liability for indirect or consequential damages.

Page 141