37

52
39
da
hu
a
20
24
-0
2-
14
 14
2-
-0
24
20
a
hu
OVERVIEW
In the past, complex wiring and difficult configuration leads

da
to low installation efficiency. Learning how to connect

devices with such condition takes too much time and

increases labor cost. Furthermore, messy cables also look

39
unpleasant and annoying. To address this issue, Dahua
52

integrated Plug & Play with PoC, PoE and other

technologies designed to enable the front and back end of

37

the equipment, making the installation more simple and

convenient.
TECHNOLOGY

14
2-
HDCVI System PoC Technology

-0
For analog system, HDCVI has always been known for its Plug & Play feature. It only needs one coaxial cable to connect both the camera

24
and XVR devices and display videos of the monitored scene. Users do not need to manually configure the network settings. The XVR can
automatically recognize the camera’s signal format for adaptive switching and displaying of video footages.

20
To further simplify the installation of HDCVI surveillance system, we released the HDCVI PoC (Power over Coax) system.
Key point：

a
Eliminates the need for separate camera power supplies and no additional wiring is required, enabling Plug & Play feature in the entire

hu
system.

da
Conventional System: PoC System:

Video
Video
39
Power
52

Extra wiring for power

37
TECHNOLOGY

14
2-
IP Plug & Play Technology

-0
Based on PoE system

24
Power over Ethernet (PoE) is a standard that allows Ethernet cables to transmit data and power simultaneously using a single network
cable. This enables system integrators and network installers to deploy powered devices in locations that lack electrical circuitry. In

20
addition, PoE eliminates the expense of installing additional electrical wiring.

Key Points:

a
• PoE NVR simplifies the system and saves electrical wiring and installation costs.

hu
• PoE NVR can initialize and add camera automatically, greatly saving initialization time.
• PoE NVR can add third-party camera automatically.

da
Conventional system
39 PoE system

Switch Data
Data Data & Power
52

Ethernet Cable
Ethernet Cable
PoE NVR
37

Non-PoE NVR
TECHNOLOGY

14
2-
IP Plug & Play Technology

-0
Based on the same LAN system

24
20
Plug & Play key point:
• When Plug and Play is enabled, the device automatically
adds cameras on the same LAN.

a
• For uninitialized cameras, the device automatically

hu
initializes them before adding them.
• When the camera and NVR IP address are in different

da
network segment, the NVR can modify the camera's IP
address to the NVR's network segment.
39
52
37
PRODUCTS AND SOLUTIONS

14
2-
HDCVI System

-0
Highlights: PoC XVR

24
• 4 signals over 1 cable (Video, Audio, Data, Power)

20
• Full channel AT and AF power supply
• Up to 500m long distance image transmission
• Input Detection / Short Circuit & Overcurrent Protection / Unplugging Protection

a
• SMD Plus / Perimeter Protection / Face Recognition / AI Coding

hu
HDCVI PoC Camera

da
Product Selection: 39
HAC-2241-PoC Series
HAC-1200-PoC Series
XVR5000-I3-P Series
HAC-2501-PoC Series
52

XVR5000-4KL-I3-P Series
HAC-1509-PoC Series
HAC-1500-PoC Series
37
PRODUCTS AND SOLUTIONS

14
2-
IP System

-0
Highlights:
Dahua PoE NVR Dahua Non-PoE NVR

24
• Power and network signals over 1 cable (PoE
models)

20
• Automatically initializes cameras, directly showing
the images without extra configuration PoE connection Switch

a
• Automatically search and add the IPC in Lan

hu
Network
• Loaded with abundant PoE features, including PoE

da
enhancement mode that enables a long distance
transmission of up to 200m, bridge mode that
Product Selection:
provides convenient connection option, and so on
39
(available on PoE models)
52

NVR IP Camera
37
 14
2-
-0
24
20
OVERVIEW
When upgrading traditional video intercom system, one of the challenges is the inability to reuse

a
existing wires. It incurs a huge amount of money to rewire everything.

hu
The Dahua’s 2-Wire Hybrid Video Intercom System solves this problem. It transmits both power

and signal through a 2-wire cable and connects to the network through Wi-Fi. You only need to

da
connect the new device to complete the installation of the video intercom system and realize the

long transmission distance.

39
It also combines the benefits of using traditional analog intercom products with Plug & Play, and

supports remote answering, unlocking, monitoring, etc. of the indoor monitor via a mobile app,
52

providing clear HD-quality videos.

37
BENEFITS

14
2-
Plug & Play

-0
The system can be used normally after connecting the devices and dialing the DIP switch. No additional configuration is required. It

24
solves the complex wiring problem of an analog system.

20
a
hu
da
39
52

DC48V
37
BENEFITS

14
2-
Transmission Distance

-0
It has longer transmission distance (up to 200m from door station to indoor monitor) compared to other brand’s 2-wire hybrid systems,

24
enabling quick response in case of an event.

20
a
hu
Up to 100m Up to 200m
Indoor Outdoor
Monitor Station

da
Signal + Power Signal + Power

Indoor Monitor Outdoor Station

39
52

Other Brand’s 2-Wire Hybrid Systems Dahua’s 2-Wire Hybrid Systems

37
BENEFITS

14
2-
Wi-Fi Connection

-0
24
• Wi-Fi connection is enabled for the indoor monitor.
• Wi-Fi connection enables remote intercom, monitoring,

20
and door release through the DMSS mobile app.

a
hu
HD Video

da
• Compared to an ordinary analog system that does not
provide HD-quality footages, Dahua’s 2-Wire Hybrid
39
Video Intercom System is equipped with a 2MP camera
52

that captures clear images for better communication.

37

Ordinary Analog System Dahua’s 2-Wire Hybrid System

PRODUCTS AND SOLUTIONS

14
2-
Solution

-0
Highlights:

24
• Supports integration of HDCVI cameras and wired alarm detectors, as well as management of all devices through VTH.
• Supports DMSS mobile app, realizing remote intercom, monitoring and door release via mobile phone.

20
a
hu
da
39
52
37
PRODUCTS AND SOLUTIONS

14
2-
Products

-0
VTH VTO

24
20
VTH5113H-W VTH5123H-W VTO2023S
VTO2003F
2-Wire Wi-Fi 2-Wire Wi-Fi 2-Wire Hybrid
2-Wire Hybrid
Hybrid Indoor Hybrid Indoor Door Station
Villa Door Station
Monitor Monitor

a
hu
KIT

da
39
KTX03 KTX02 KTX01
Video Intercom Video Intercom Video Intercom
52

KIT KIT KIT

37
 14
2-
-0
24
20
OVERVIEW

a
hu
The Dahua HTTP Push highlights a streamlined, efficient, and
secure approach to data transmission from front-end,
back-end, software products, to third-party platforms. With

da
HTTP Push, transmission of alarm events, data reports, and
images becomes quick and effective.
39
This transmission method simplifies the process for third-party clients, eliminating
52

common development and configuration challenges. Also, easy configuration at

the device side saves time and manpower costs.
37

Overall, applying Dahua HTTP Push not only simplifies processes but also
ensures a higher level of security and reliability in data transmission.
BENEFITS

14
2-
No Need for Frequent Development and Configuration by Third-party Customers

-0
Third parties involved simply need to support HTTP services and adeptly parse the related protocols.This entails parsing

24
of transmitted data types in JSON and image formats in JPG.

20
a
hu
da
Sample Setup, Less Labor Cost, Seamless Integration
No Specific Less Wasted Time for Third-party
Requirements Customers
39
52
37
BENEFITS

14
2-
Easy Transmission of Various Information to Third-party Customers

-0
Diverse forms of information can be efficiently transmitted to third parties, marking a notable advancement in

24
convenience and efficiency. This streamlined transmission process enhances the overall effectiveness of data sharing

20
and ensures a seamless and efficient flow of information to external entities.

a
Front-end

hu
•IPC and PTZ support multiple types of auto-uploading content, including events, reports and images.
•ITC supports transmission of data including event picture and vehicle metadata.

da
Back-end
39
• NVR and XVR support event types such as motion detection, device-related error events, and intelligent
events.
52

Software Platform
37

• DSS only supports command-based HTTP commands (GET, POST, PUT, and DELETE methods).
BENEFITS

14
2-
Ensures Safety

-0
The Dahua HTTP Push prioritizes the security of information transmission by utilizing the HTTPS protocol to

24
ensure encryption during transmission.

20
What can HTTP Push provide to • IPC, PTZ, ITC, NVR, XVR, and DSS all

a
support HTTPS. HTTPS protocol is an
achieve advanced level of security?

hu
advanced level of HTTP protocol. It ensures
better and safer encrypted transmission.

• In addition, uploading of IPC reports offer

da
more options. Email and SFTP are also
available for report transmission.

• Authentication is enabled for front-end

39
devices, IPC, PTZ and ITC. It also supports
using a username and password to better
protect transmission security.
52
37
BENEFITS

14
2-
Easy Configuration on Dahua Devices

-0
The device-side configuration process is very simple and fast.

24
20
IPC & PTZ ITC

Must configure the third-party

server IP, port, and paths on ITC uses the third-party

a
the device side. Three customer's customized url

hu
uploading methods: events, addresses. No fixed IP
images, and reports. address is required.

da
NVR & XVR DSS
39
The back-end configuration DSS commands can be input
52

is straightforward for NVR according to the specific

and XVR. It only needs to requirements of the third-party
configure the HTTP in the customer.
37

alarm center and choose the

types from events or images.
PRODUCTS

14
2-
Detailed Data Supported for Transmission

-0
ITC IPC, PTZ NVR, XVR

24
20
Event Format Events Event Types
Event picture + vehicle metadata (plate number, 1. Normal Alarm Events: no SD card, insufficient SD 1. Motion detection, alarm input, video tampering, video
vehicle type, color, speed, front face keying, etc.) card capacity, SD card error, power over-voltage, loss and other common events.
+ illegal information (only for illegal events). power under-voltage, and security warning. 2. Device-type events, such as no hard drive, hard
2. Intelligent Alarm Events: dynamic detection video drive error, low storage capacity, etc.

a
tampering, scene change, sudden change in sound
Event Type intensity, audio abnormality, etc.
3. Intelligent events include but are not limited to

hu
1. Checkpoint Event: ANPR SMD, Face Detection, Face Comparison, Perimeter
2. Illegal Event: 31 event types such as running Protection, Video Metadata, and intelligent events from
the red lights, disobeying the direction arrow, the front-end camera.
illegal lane changing, driving against traffic, Picture

da
illegal parking, speeding, illegal intrusion, Supports event types such as motion detection, scene Event Contents
not yielding to pedestrians, calling while change, and intelligent events (JPG format). 1. Event Information: includes the channel triggered by
driving, the event, time, specific event code, and related
and unfasten seat belt. Reports attributes.
Supports intelligent functions with reports, such as 2. Picture: the picture of the triggered event, including
39
Data format people counting, traffic statistics, video metadata, heat big and small images (JPG format).
JSON format map, and ANPR (JSON format).
XVR
52

*The picture/report types in push notifications are the same

Image type: with the picture playback or supported AI function of certain
Common events are the same as NVR. Intelligent events
JPG (included in JSON) devices. only include SMD, Face Detection, Face Recognition,
37

and Perimeter Protection.

PRODUCTS

14
Product Image Product Series

2-
-0
WizMind Panoramic Series WizMind 7 Series WizMind 4 Series
IPC
WizMind 5 Series WizSense 3 Series

24
WizMind 8 Series

20
Most models of SD1A Series, SD22 Series, SD29 Series, SD3E Series, SD3C Series, SD4A Series, SD60
PTZ Series, SD49 Series with DB in the product name
*Other series will be supported soon.

NVR

a
NVR4-4KS2/L, NVR4-4KS3, NVR4-EI, NVR5-EI, NVR5-XI, NVR6-XI

hu
Cooper-I Series (except 1B16H-I), XVR4000-I Series (except 4232AN-I)
XVR *Other series will be supported soon.

da
DSS DSS V8.0.4 and above
39
52

ITC352
ITC ITC952
37

ITC1652

• For more Dahua HTTP API information, please visit https://depp.dahuasecurity.com/integration/guide.

 14
2-
-0
24
OVERVIEW

20
When the central platform or backend storage

device is unable to directly manage the frontend

a
hu
device via IP or fixed domain name, the Dahua

Auto Registration Technology effortlessly solves

da
this connectivity challenge.

Dahua's Auto Registration is a protocol that

seamlessly connects devices in a dynamic IP

39
environment with the central platform or backend

storage devices with fixed IP or domain name.

52

By enabling the corresponding listening ports on

37

the platform or backend storage devices, the

devices can proactively access the central

platform and successfully establish a

PRODUCTS AND SOLUTIONS

14
2-
For SMB Scenario

-0
NVR

24
10.58.1.10
Internet

20
Gateway Gateway

Fixed IP Auto Registration Dynamic IP

10.58.1.0 192.168.1.0

a
hu
For Large-scale Scenario

da
DSS Server
10.50.1.2
39
Internet
52

Gateway Gateway

DSS Client Fixed IP Auto Registration Dynamic IP

37

10.50.1.0 192.168.1.0
PRODUCTS AND SOLUTIONS

14
2-
-0
Product IPC PTZ ITC XVR NVR IVSS EVS DSS

24
20
Image

a
hu
Auto-Register All series All series All series All series All series All series All series No
as Client End

da
NVR 5-EI Series
39
NVR 5-XI Series
Registered as NVR 6-XI Series
No No No No All series All series All series
Service End
52

NVR 4-4KS3 Series

NVR 4-EI Series
NVR 4-4KS2/L Series
37
 14
2-
-0
24
20
a
[ ENABLING A SMARTER SOCIETY AND BETTER LIVING ]

hu
da
39
52
37