Scribd
Upload
28 views2 pages

1.4.7-Packet-Tracer - Configure-Router-Interfaces

The document outlines a Packet Tracer exercise for configuring router interfaces with IPv4 and IPv6 addressing. It includes an addressing table for devices R1, R2, PC1, PC2, PC3, and PC4, along with objectives and instructions for verifying connectivity. Users are instructed to assign IP addresses and ensure successful communication between the devices.

Uploaded by

mearckfrancisvoughnlol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

1.4.7-Packet-Tracer - Configure-Router-Interfaces

The document outlines a Packet Tracer exercise for configuring router interfaces with IPv4 and IPv6 addressing. It includes an addressing table for devices R1, R2, PC1, PC2, PC3, and PC4, along with objectives and instructions for verifying connectivity. Users are instructed to assign IP addresses and ensure successful communication between the devices.

Uploaded by

mearckfrancisvoughnlol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Packet Tracer - Configure Router Interfaces

Addressing Table
Device Interface IP Address/Prefix Default Gateway

R1 G0/0 172.16.20.1 /25 N/A


G0/1 172.16.20.129 /25 N/A
S0/0/0 209.165.200.225 /30 N/A
PC1 NIC 172.16.20.10 /25 172.16.20.1
PC2 NIC 172.16.20.138 /25 172.16.20.129
R2 G0/0 2001:db8:c0de:12::1/64 N/A
G0/1 2001:db8:c0de:13::1/64 N/A
S0/0/1 2001:db8:c0de:11::1/64 N/A
fe80::2 N/A
PC3 NIC 2001:db8:c0de:12::a/64 fe80::2
PC4 NIC 2001:db8:c0de:13::a/64 fe80::2

Objectives
Part 1: Configure IPv4 Addressing and Verify Connectivity
Part 2: Configure IPv6 Addressing and Verify Connectivity

Background
Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device
and verify connectivity between the LANs.
Note: The user EXEC password is cisco. The privileged EXEC password is class.

Instructions

Part 1: Configure IPv4 Addressing and Verify Connectivity


Step 1: Assign IPv4 addresses to R1 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R1 LAN interfaces, PC1 and PC2. The serial
interface has already configured.

Step 2: Verify connectivity.


PC1 and PC2 should be able to ping each other and the Dual Stack Server.

© 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
Packet Tracer - Configure Router Interfaces

Part 2: Configure IPv6 Addressing and Verify Connectivity


Step 1: Assign IPv6 addresses to R2 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R2 LAN interfaces, PC3 and PC4. The serial
interface is already configured.

Step 2: Verify connectivity.


PC3 and PC4 should be able to ping each other and the Dual Stack Server.

© 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 2 www.netacad.com

You might also like