Scribd
Upload
8 views1 page

MATERIALS

The document lists materials required for various electronic projects using an Arduino Uno Board, including components for linking LEDs, digital and analog inputs and outputs, a seven-segment display, servo motors, and a liquid crystal display. It specifies quantities and types of resistors, switches, and other components needed for each section. Additionally, it notes that project materials may vary based on individual designs.

Uploaded by

itsmebasic18
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views1 page

MATERIALS

The document lists materials required for various electronic projects using an Arduino Uno Board, including components for linking LEDs, digital and analog inputs and outputs, a seven-segment display, servo motors, and a liquid crystal display. It specifies quantities and types of resistors, switches, and other components needed for each section. Additionally, it notes that project materials may vary based on individual designs.

Uploaded by

itsmebasic18
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MATERIALS

General Materials
1 pc Arduino Uno Board
1 pc USB Standard A-B Cable
1 set Connecting Wires
1 set Desktop computer/Laptop computer
1 pc Bread Board
1. LINKING LED
10 pcs Red LED
10 pcs 1 KΩ Resistors
2. DIGITAL INPUT AND OUTPUT
3 pcs Red LED
3 pcs 10 KΩ Resistors
3 pcs 220 ohm Resistor
1 Pushbutton Switch/Tact Switch
3. ANALOG INPUT AND OUTPUT
1 pc Red LED
1 pc 10 KΩ Resistors
1 pc 10k ohm Potentiometer
1 pc 220 ohm Resistor
4. SERIAL MONITOR AND ANALOG INPUT
1 pc Red LED
1 pc LDR
1 pc 220 ohm Resistor
1 pc 10 kΩ
5. SEVEN-SEGMENT DISPLAY
1 pc Seven-Segment display
7 pcs 220 ohm Resistor
6. SERVO MOTORS
1 pc Servo Motor
7. Liquid Crystal Display
1 pc Soldering Iron (Borrow equipment room)
1 meter Soldering Lead (Borrow equipment room)
1 pc LCD
1 pc 10K ohms Pot
1 pc 220 ohms resistor
8. PROJECTS
Materials depend on your design

You might also like