BhuNaksha 3.

0 – FMB Mutation User Guide

BHUNAKSHA 3.0
(Mutation of FMBs Digitized using CollabLand)

https://bhunaksha.nic.in

User Manual

1
BhuNaksha 3.0 – FMB Mutation User Guide

1. Modify Map Overview

2. Table Data
2.1 Ladder Table
2.2 Station Table
2.3 Boundary Table
2.4 Extended Table
2.5 Adjacency Table
2.6 Control Table
2.7 Traverse Table
2.8 Bearing Table
3. Open Map
4. Page Setup
5. Save
6. Export
6.1 Image
6.2 PDF
6.3 Shape File
6.4 KML
7. Sub Division Point
7.1 Offset Point
7.2 Triangle Point
8. Sub Division Lines
8.1 Point to Point
8.2 Area and Side
9. Sub Divisioning
10. Merge Sub Divisions
11. Modify
11.1 Modify Point
11.2 Modify Text
11.3 Move Text
12. Delete
12.1 Point
12.2 Line
12.3 Sub Division
13. Tools
13.1 Distance
13.1.1 Point to Point
13.1.2 Point to Line
13.2 Area
13.3 Angle
13.4 Search
13.4.1 Point
13.4.2 Line

2
BhuNaksha 3.0 – FMB Mutation User Guide

13.4.3 Sub Division

14. Details
14.1 Note
14.2 Copy
14.3 Modify
14.4 Move
14.5 Rotate
14.6 Delete
15. View Menu
15.1 Undo
15.2 Redo
15.3 Zoom In
15.4 Zoom Out
15.5 AutoFit
15.6 Pan Mouse
15.7 Pin Map
15.8 Release Map
16. Scale
16.1 Variable Scale
16.2 Fixed Scale
16.3 User Scale
17. WorkFlow Menu
17.1 Forward
17.2 Verify
17.3 Approve
17.4 Reject

3
 BhuNaksha 3.0 – FMB Mutation User Guide

1. Modify Map Overview

This section will provide an overview of the FMB Mutation module which are used by
Draftsman/Surveyor for doing modifications in map. Each of the operations will be
described below:-

View Menu
1. Modify Map

Modify Map
Menu
Table Data

Canvas

Figure 1 Modify Map Page

Modify Map page Consists of four Panel as shown in figure.

2. Table Data

BhuNaksha provides the details of following Data Tables on selecting the map. The
respective tables are updated dynamically when new point is created in the map during
modification.

2.1 Ladder Table – It displays the basic 5-Column Ladder Data of Chain Survey. The table
will be updated automatically when new point is created.

2.2 Station Table - Holds Co-ordinate Data of Base Points in Total Station Survey and
Theodolite Survey. The Elevation of the points, if not entered, would be considered as 0.0
(zero) by default.

2.3 Boundary Table - Gives the list of points in the outer boundary and the sub-division
boundaries of the map. The outer boundary and sub-division boundary are updated
automatically whenever new point is created.

4
BhuNaksha 3.0 – FMB Mutation User Guide

2.4 Extended Table - Contains the information about the Sub

Sub-Division
Division or Cut Points that are
defined in the map, for all systems of Survey (Chain, Theodolite or Total Station). Therefore
this table can be used along with the Ladder Table and the Station Table.

2.5 Adjacency Table - Lists the adjacent plot numbers/names and the vertices they share
shar
with the parcel being digitized.

2.6 Control Table - Enlists the names of various control points in the map and their types.
The control points can be BiBi-Junction (BJ) points, Tri-Junction
Junction (TJ) points, or Khandam (KH)
points.

2.7 Traverse Table - Specifies the co

co-ordinates
ordinates and type of Traverse Points used for
mosaicing of maps.

2.8 Bearing Table - Provides the facility to log the Angle and Distance of Traverse Survey.
The Bearing of the first Station station also need to be specified, otherwise it would be
assumed as zero (0.0).

3. Open Map

When you clicked on Open Map m menu then Plot Details pop up window will appear on screen,
where we can select district, taluk, village
village, ward/block and survey no.. On Clicking ok button, the
corresponding map will be opened in canvas as show in figure 2.

Figure 2 Open Map

5
BhuNaksha 3.0 – FMB Mutation User Guide

4. Page Setup

The "Page Setup" options allows setting of parameters like paper size, orientation, and
margin. On successfully entering the required parameters, the canvas would be resized and
redisplayed.

Figure 3 Page Setup

5. Save

After doing map modifications, click on save menu to save the current tippan in the
database

6. Export

Export menu is intended for exporting Map from BhuNaksha into specified formats.
Currently the following formats are supported

6.1 Image File – In this case, the map displayed in the Canvas can be exported into an
Image file. Images can be exported in the JPG/JPEG, TIF/TIFF, PNG and BMP formats.

6.2 PDF File – In this case, the map displayed in the Canvas can be exported into a PDF file.

6
BhuNaksha 3.0 – FMB Mutation User Guide

6.3 Shape File - In this case, the map displayed in the Canvas can be exported into a Shape
file. On invoking this option, the
he map would be saved into six files with *.dbf *.fix *.prj *.qix
*.shp and *.shx extensions

6.4 KML File- In this case, the map displayed in the Canvas can be exported into a KML file.
On invoking this option,, tthe
he map would be saved in the given file in KML format.

7. Sub Division Point

This option allows users to create Points, primarily required for Sub
Sub-Division
Division of the Maps.
The following point creation methods are available

7.1 Offset Point

Using this option, the user can specify Sub Sub-Division

Division Points on Base Lines and
Boundary Lines of a Tippan. On invoking thi thiss option, the system will highlight the lines for
selection.. On selecting the line, a dialog box would appear with the following fields.

Length Unit Select

lect the unit in which the length is entered
Distance Enter the distance from the base point
Offset Enter the offset distance (0.0 for Point on Line)
Name Enter the name of the point
Total Length Select how the Total Length is to be displayed
Add Point in Select the Table in which the Point is to be added

While entering the data, the Point will be temporarily displayed on the Canvas. Pressing the
"OK" Button would create the SubSub-Division Point. Users can create Symbols
bols at the given
position by specifying the Symbol Code as the Point name. Users are advised to select the
lines at the same end (as far as possible) for better results
results.

Figure 4 Offset Point

7
BhuNaksha 3.0 – FMB Mutation User Guide

7.2 Triangle Point

Using this option, users can create points by specifying its distance from two existing
points. On invoking the option, the system would prompt for the first and the second points;
and the side in which the point shall be created. Once these points are specified, the system
would display a dialog through which the users can enter the point name and the distances
from the the selected points, and the unit in which the distances are entered. Pressing the
"OK" Button would create the Point.

8. Sub Division Lines

This option allows users to create sub-division Lines, primarily used as boundaries of sub-
divisions in the Maps. The following Line creation methods are available.

8.1 Point to Point

Using this option, the user can create sub-division lines by connecting existing
points. On invoking this option, the system will highlight the lines for selection. Then the
user can now select the points connecting the sub-division lines. The operation can be
terminated by clicking at a corner (the last corner) two times, or by pressing Enter.

8.2 Side and Area

Using this option, the user can create sub-division lines parallel to the sides of a sub-
division enclosing a user specified area. Once this option is invoked, the system will prompt
to Select the Sub-Division near the Side. On selecting the side of a sub-division, the system
would prompt for the area of sub-division, the unit in which the area is entered, and the
names of sub-division points. Once these inputs are provided the system would create the
sub-division line enclosing the specified area. The region covering the specified area would
be displayed in a shaded pattern and the user would be prompted to optionally modify the
displayed length of the new sub-division line.

9. Sub Divisioning

Using this option, the user can create a Sub-Division. On invoking this option, Click on the region
where the sub division has to be done. On clicking inside the closed boundary of the Sub-Division,
the system will prompt for the Sub-Division Name and the Displayed Area. Specifying the name and
the area, the Sub-Division will be created. If a Sub-Division exists at the clicked point, that will be
deleted.

10. Merge Sub Divisions

Using this option, the user can merge two Sub-Divisions into one Sub-Division. On invoking this
option, the user can "Select the two Sub-Divisions to Merge". Then the system will prompt for the
Sub-Division Name and the Displayed Area. Specifying the name and the area, the two selected Sub-
divisions will be merged and a new Sub-Division will be created.

8
BhuNaksha 3.0 – FMB Mutation User Guide

11. Modify

11.1 Modify Point

Using this option, the user can modify the parameters (like coordinates, base and
offset distances) of the Points in the Tippan. On selecting the Point, a dialog box would
appear, using which the user can enter the modified parameters of the Point.

11.2 Modify Text

Using this option, the user can modify the Texts in the Tippan (like Displayed Length
of Lines, Displayed Area of Sub-Divisions). On invoking the option, the System will highlight
the texts in map. On selecting the Text, a dialog box would appear, using which the user can
enter the modified text. Facility exists to remove the Length of the Lines and to display them
within brackets. Users can rotate the Area and Name of the Sub-Divisions also using this
option.

11.3 Move Text

Using this option, the user can move the Texts in the Tippan. On invoking the option,
the System will prompt for selection of Text to Move. The user can select any text and drag it
to the desired position.

12. Delete

12.1 Point
This option help users to delete independent (un-used) Points in the map. On
selecting the Point, it would be deleted (without any further confirmation).

12.2 Line
This option help users to delete independent (un-used) Lines in the map. On
selecting the Line, it would be deleted (without any further confirmation).

12.3 Sub Division

This option help users to delete a Sub-Division in the map. When the option is the
name of the Sub-Division to be deleted. On specifying the Sub-Division name, it would be
highlighted and the map would be moved such that the specified Sub-Division would be
positioned at the centre of the Canvas. The Sub-Division would be deleted once the user
confirms the system prompt to this effect.invoked, the system would display a dialog box
using which the users can specify

13. Tools

13.1 Distance
13.1.1 Point to Point
Using this option, the user can measure the distance between two existing
points in the Tippan. When this option is invoked, the system will prompt for
selection of first point and second point. When the second Point is also selected, the
system would display the distance between the two selected Points.

9
BhuNaksha 3.0 – FMB Mutation User Guide

13.1.2 Point to Line

Using this option, the user can measure the perpendicular (offset) distance
from an existing point to a Line in the Tippan. When this option is invoked, the
system will prompt for selection of point and the line. When the Line is also
selected, the system would display the offset distance from the selected Point to the
Line.

13.2 Area
This option allows the user to compute the area enclosed within a polygon. On
invoking this option, the user can now select the points falling on the vertices of the
polygon. A random point anywhere in the canvas can be selected by pressing the right
mouse button. The selection will automatically terminate when a closed boundary is
specified or the 'C' key is pressed. On successful selection of the polygon points, the
enclosed area would be displayed

13.3 Angle
This option allows the user to measure the angle between two lines. On invoking
this option, the system will prompt for the lines. On selecting two lines, the angle from the
first line to the second line in clockwise direction (in Degrees and Minutes) would be
displayed.

13.4 Search
13.4.1 Point
This option help users to locate a Point in the map. When the option is
invoked, the system would display a dialog box using which the users can specify the
name of the Point. On specifying the Point name, a temporary Marker would be
displayed on the given Point and the map would be moved such that the specified
Point would be positioned at the centre of the Canvas.

13.4.2 Text
This option allow users to locate a Text in the map. When the option is
invoked, the system would display a dialog box using which the users can specify the
Text to be searched. Users may suffix and/or prefix an Asterisk/Star ( * ) symbol to
denote the behaviour of search as given below:

EnterTo Search for

abc The EXACT Text "abc"
abc* Texts STARTING WITH "abc"
*abc Texts ENDING WITH "abc"
*abc* Texts CONTAINING "abc"

Provision also exists to conduct the search in the whole map or limit it to Point/Sub-
Division Names, Linear/Area Measurements, and Notes. On specifying the inputs, a
Table of Search Results would be displayed in a tabular form along with a Display
Selector ( [ ] ). On clicking the Display Selctor, a temporary Marker would be

10
BhuNaksha 3.0 – FMB Mutation User Guide

displayed over that Text and the map would be panned such that the specified Point
would be positioned at the centre of the Canvas.

13.4.3 Sub Division

This option help users to locate a Sub-Division in the map. When the option
is invoked, the system would display a dialog box using which the users can select
the name of the Sub-Division. On selecting the Sub-Division name, it would be
highlighted and the map would be moved such that the specified Sub-Division would
be positioned at the centre of the Canvas.

14. Details

This menu provides a host of features like creation and modification of details like Notes.

14.1 Note
Using this option, the user can create Notes in the Maps. On invoking the option, a
dialog box would appear consisting of the following fields.
Note - Enter the Text for the Note
Font - Choose the Font of the Note
Color - Choose the Color of the Note
Size - Enter the Size of the Note
Angle - Enter the Rotation Angle of the Note
Underline - Select the box if the Text is to be underlined
Bold - Select the box if the Text is to be in Bold
Italic - Select the box if the Text is to be in Italics

On properly entering the fields and pressing "OK" button, the System will prompt:
"Specify Position for Note". On specifying the position, the note will be created. Users can
modify the above parameters using the same dialog box which would re-appear when the
Right Mouse Button is pressed (before specifying the position of Note).

14.2 Copy
Using this option, the user can copy the Details in the Tippan. On invoking the
option, the System will highlight the Detail to Copy. The user can now pick the detail and
copy it any number of times by specifying the location. Press Esc or Enter key to terminate
copying and to pick a new detail for copy.

14.3 Modify
Using this option, the user can modify the Details in the Tippan. On invoking the
option, the System will highlight the Detail to Modify. On selecting the Detail, a dialog box
would appear, using which the user can enter the modified parameters.

14.4 Move
Using this option, the user can move the Details in the Tippan. On invoking the
option, the System will highlight the Detail to Move. The user can select any Detail and drag
it to the desired position.

11
BhuNaksha 3.0 – FMB Mutation User Guide

14.5 Rotate
Using this option, the user can Rotate the Details (except aligned Symbols) in the
Tippan. On invoking the option, the System will highlight the Detail to Rotate. On selecting
the detail, a dialog box would appear using which the user can specify the angle of rotation.
If the given angle is Positive then the Detail will be rotated in Anti-clockwise direction and if
it is Negative then the Detail will be rotated in clock-wise direction.

14.6 Delete
Using this option, the user can delete the Details in the Tippan. On invoking the
option, the System will highlight the Detail to Delete. The user can select any Detail and it
will be deleted.

15. View Menu

15.1 Undo
The "Undo" option undoes the last operation performed

15.2 Redo
The "Redo" option redoes the last operation undone.

15.3 Zoom In
This option changes the zoom scale to double of the existing value, if the scale
chosen is "Variable".

15.4 Zoom Out

This option changes the zoom scale to half of the existing value, if the scale chosen is
"Variable".

15.5 AutoFit
The "Auto Fit" option automatically fits the Tippan according to the space available
in the canvas. Auto Fit will function properly only if 'Variable' scale is used. In case of a fixed
scale, this option only centers the canvas.

15.6 Pan Mouse

On selecting this menu, the user can Press the Mouse and drag to Pan the Tippan
according to the requirement.

15.7 Pin Map

This option Pins the map to the drawing canvas so that any further Panning and
Zooming is arrested.

15.8 Release Map

This option Releases the map from the drawing canvas so that further Panning and
Zooming is possible.

12
BhuNaksha 3.0 – FMB Mutation User Guide

16. Scale

This option allows the user to change the scale of the map for editing.

16.1 Variable Scale

This option changes the zoom scale mode to "Variable".

16.2 Fixed Scale

These are the fixed scales like 500,1000, 2000 which are set during the digitization
process.

16.3 User Scale

This option changes the zoom scale to a value specified by the user. On invoking this
option, the system would display a dialog box using which the user can specifiy the scale
value.

17. WorkFlow

Figure 5 WorkFlow Page

This option allows the user to change the scale of the map for editing.

13
BhuNaksha 3.0 – FMB Mutation User Guide

17.1 Forward
This option is meant for the user who is responsible for modifying the FMB during
Internal workflow. When the modification is completed the FMB will be forward for further
processing by the higher authority. When a map is forwarded, it cannot be accessed by
anyone else other than the higher authority, untill the workflow process is concluded.

17.2 Verify
This option is meant for the user who is responsible for modifying the FMB during
Internal workflow. When the modification is completed the FMB will be forward for further
processing by the higher authority. When a map is forwarded, it cannot be accessed by
anyone else other than the higher authority, untill the workflow process is concluded.

17.3 Approve
This option will be enabled for the user who is having the role of the Approving
authority. Once this option is selected the modified FMB will be treated as the current FMB
and the old FMB will not be available for further transaction. Care has to be taken before
approving the modified FMB as it completes the transaction process.

17.4 Reject
This option will be enabled only for the verifying and the approving authority. When
the concerned authority is not satisified with the modifications and/or transactions carried
out by the next lower level officer(s) this option will be used to terminate the initiated
transaction.

14