Single Phase Electronic

Electricity Meter
The emlite single phase
meter provides a
compact solution for
many metering
applications. Fully
approved in accordance
with the Measuring
Instruments Directive
(MID), this highly
accurate meter may be
used for utility billing or
micro-generation
metering.

Features -
 Fully MID approved
 Measures Import and Export Active Energy
 Easy-to-read LCD Display
 Optical port for configuration or meter reading
 Pulsed Output version available

The ECA2 single phase meter is one of the worlds most compact metering
devices allowing the unit to be used in metering installations where space is at a
premium.

The meter provides measurement of active (kWh) energy in both import and
export directions with registers shown on the large easy to read LCD display.
The display features 8×3.5mm characters and can be configured to auto cycle
any of the available registers or remain static with only a single register
viewable.

The meter features an optical port conforming to IEC 629056-21 allowing meter
readings to be collected electronically using a standard probe and software tool.
The port also allows configuration of the meter.

The electronic meter is highly reliable and capable of withstanding high voltage
events and overcurrent without failure. The meter is resistant to tamper with
reverse energy fraud detection and sealing for life.

High quality solid brass cable terminals are used allowing 100 Amp operation.

To enable the connection of energy management systems, an electronic pulsed

emlite Ltd, 10 Reynolds Business Park, Stevern Way, Peterborough PE1 5EL
www.em-lite.co.uk
tel: +44 (0)1733 890060 email: [email protected]
 Technical Data
Single Rate Electronic
Electricity Meter Electrical Voltage Nominal voltage 220V—240V

Maximum 276V

Voltage withstand 415V (maximum 6 hours)

Frequency Nominal frequency 50Hz

Frequency variation ± 5%

Current Basic current (Iref) 5, 10, 15 and 20A

Maximum (Imax) 100A (140% overcurrent)

Metrology Accuracy Active energy Class B (1%), to EN

The meter meets the essential requirements of the Measuring Instruments Directive
(MID) 2004/22/EC

Environmental Temperature Range -40°C to +70°C

Ingress protection IP52, to BS EN 60529

Meters are intended for installation in a in a class E2 electromagnetic environment and

Physical Terminal arrangement BS 7856

Main Terminal size 8.2 mm diameter

Terminal Construction Solid brass

Dimensions 91H×125W×40D

emlite Ltd, 10 Reynolds Business Park, Stevern Way, Peterborough PE1 5EL
www.em-lite.co.uk
tel: +44 (0)1733 890060 email: [email protected]