Scribd
Upload
39 views2 pages

CDA Flow Controllers Cda722-01

The CDA flow controllers are designed to operate in any position and can handle pressures up to 350 bar, with flow ranges from 0.005 to 150 l/min. They are available in stainless steel or brass, and are suitable for applications such as cooling circuit monitoring and dry-run pump prevention. The controllers feature adjustable contacts and must be installed away from magnetic fields to ensure proper functionality.

Uploaded by

detextdhy.eng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

CDA Flow Controllers Cda722-01

The CDA flow controllers are designed to operate in any position and can handle pressures up to 350 bar, with flow ranges from 0.005 to 150 l/min. They are available in stainless steel or brass, and are suitable for applications such as cooling circuit monitoring and dry-run pump prevention. The controllers feature adjustable contacts and must be installed away from magnetic fields to ensure proper functionality.

Uploaded by

detextdhy.eng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Flow controllers, metallic

CDA
• Operates in all positions
• With 1 adjustable contact
• Versions: Stainless steel or brass
• Pressure: Up to 350 bar
• Ranges: between 0.005 ...150 l/min
APPLICATIONS

- Cooling circuit monitoring, high pressure washing piping, dry-run pump


prevention, etc....

DESCRIPTION

The CDA controls the flow, on a vertical or horizontal pipe, of a liquid free of
particles.

Operation
An orifice plate with a magnet is pushed by the fluid to monitor, in a cylindrical tube.
A compensating spring insures the equilibrium of plate and allows the mounting in
any position. A Reed contact is adjustable all along the scale, its status changes
with the passage of the magnet. With these equipments, the CDA operates
independently of the pressure, even in low flow rates.

CDA flow controllers must be installed away from any magnetic field. All
ferromagnetic parts, must be at a minimum distance of 10 cm.

TECHNICAL FEATURES

Temperature -20 ... +100 °C (On request: up to 160 °C)


Operating ranges l/min of water at 20 °C
Accuracy ±10 % Full range
Pressure drop Fitting 1": 0.02 ... 0.4 bar
Fitting ½": 0.02 ... 0.3 bar
Fitting ¼": 0.02 ... 0.2 bar
Contact Standard: N.O. whithout flow
Hysteresis ≈1.5 mm
722

722
Connector IP 65; DIN 43650; C shape

Brass model
Pressure limits 250 bar (Fittings 1")
300 bar (Fittings ½" and ¼")
Main parts Body: Nickel-plated brass; other wet parts: brass
Spring AISI 316 Ti (1.4571)
Seals NBR
Magnet Hard ferrite

Stainless steel model


Pressure limits 300 bar (Fittings 1'')
350 bar (Fittings ½" and ¼")
Main parts Body, other wet parts: AISI 316 Ti (1.4571)
Spring AISI 316 Ti (1.4571)
Seals FPM
Magnet Hard ferrite

Other configurations: On request

EC Conformity: The instrument meets the legal requirements of the current


European Directives

Flow controllers, metallic DEB


INTERNATIONAL
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel +33 (0)1 30 25 83 20 Web www.bamo.eu
CDA 722-01 /1
Fax +33 (0)1 34 10 16 05 E-mail [email protected] 02-03-2022 D-722.01-EN-AC

Non-contractual document: Subject to amendments due to improvements


CONTACTS FEATURES

The adjustment is continuous, sliding the switch along its guide and fixing it with the screws.

Standard SPST, N.O. whithout flow:


CDA, fittings 1'' and ½" Rated: 230 V / 3 A / 100 VA
CDA, fittings ¼" Rated: 140 V AC / 0.7 A / 20 VA
Rated: 200 V DC / 1 A / 20 VA

Change-over contact, SPDT (option):


CDA, fittings 1'' and ½" Rated: 250 V / 1.5 A / 50 VA (minimal load 3 VA)
CDA, fittings ¼" Rated: 150 V AC/DC / 1 A / 20 VA

ATEX agreements, Ex contacts (Option):


CDA, fittings 1" ATEX II 2 G Ex mb II T6 & ATEX II 2 D Ex tD A21 IP67 T80 °C
ATEX II 2 G Ex mb II T5 & ATEX II 2 D Ex tD A21 IP67 T100 °C
SPST, N.O. contact whithout flow: Rated 250 V / 2 A / 60 VA
SPDT, change-over contact: Rated 250 V / 1 A / 30 VA
CDA, fittings ½'' and ¼'': Ex II 2G Ex ib IIC & Ex II 2D Ex ib IIIC
Operating temperature: -5 °C ... +45 °C

CODE NUMBERS AND DIMENSIONS

Code Reference Flow range Fitting BSPF Dimensions [mm] Mass


Brass AISI 316 Ti [ l/min ] G T L1 D2 A4 [g]
722 100 722 200 CDA 01 0.005 ... 0.006
722 102 722 202 CDA 02 0.04 ... 0.13
¼'' 10 65 17 57 140
722 106 722 206 CDA 06 0.1 ... 0.6
722 108 722 208 CDA 3 0.5 ... 3
722 127 722 227 CDA 7 2...7
722 128 722 228 CDA 13 3...13 ½" 14 90 31.2 67 350
722 129 722 229 CDA 20 4...20
722 133 722 233 CDA 45 15...45
722 136 722 236 CDA 90 30...90 1" 17 152 40 99 1130
722 139 722 239 CDA 150 60...150
722

722

Models: CDA 01, 02, 06, 3, 45, 90, 150 Models: CDA 7, 13, 20

Flow controllers, metallic DEB


INTERNATIONAL
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel +33 (0)1 30 25 83 20 Web www.bamo.eu
CDA 722-01 /2
Fax +33 (0)1 34 10 16 05 E-mail [email protected] 02-03-2022 D-722.01-EN-AC

Non-contractual document: Subject to amendments due to improvements

You might also like