Scribd
Upload
24 views4 pages

Week 2: Assignment 2: (Https://swayam - Gov.in)

The document outlines the content and assignments for Week 2 of the 'Introduction to Abrasive Machining and Finishing Processes' course, focusing on sustainable grinding processes. It includes quiz questions related to cutting fluids, their emissions, and their effects on health and the environment. The assignment submission deadline has passed, and the document provides feedback on incorrect answers to the quiz questions.

Uploaded by

khaxxx216
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views4 pages

Week 2: Assignment 2: (Https://swayam - Gov.in)

The document outlines the content and assignments for Week 2 of the 'Introduction to Abrasive Machining and Finishing Processes' course, focusing on sustainable grinding processes. It includes quiz questions related to cutting fluids, their emissions, and their effects on health and the environment. The assignment submission deadline has passed, and the document provides feedback on incorrect answers to the quiz questions.

Uploaded by

khaxxx216
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

3/22/25, 5:51 PM Introduction to Abrasive Machining and Finishing Processes - - Unit 5 - Week 2: Sustainable Grinding Process

(https://swayam.gov.in) (https://swayam.gov.in/nc_details/NPTEL)

[email protected]

NPTEL (https://swayam.gov.in/explorer?ncCode=NPTEL) » Introduction to Abrasive Machining and Finishing

Processes (course)


Click to register
for Certification
exam
Week 2 : Assignment 2
(https://examform.nptel.ac.in/2025_01/exam_form/dashboard)
The due date for submitting this assignment has passed.

If already Due on 2025-02-05, 23:59 IST.


As per our records you have not submitted this assignment.
registered, click
to check your 1) Which of the following cutting fluid emissions causes Folliculitis and Dermatitis? 1 point
payment status
Nitrides
Endotoxins
Chlorinated paraffins
Course
Cobalt
outline
No, the answer is incorrect.
Score: 0
About
Accepted Answers:
NPTEL ()
Chlorinated paraffins

How does an
2) Which of the following is a common emission form that found in mineral oils 1 point
NPTEL
online
Benzene
course
work? () Benzo(a) pyrene
Toluene
Week 1: Hydro carbons
Introduction
No, the answer is incorrect.
to Score: 0
Conventiona
Accepted Answers:
l Abrasive Benzo(a) pyrene
Processes ()

3) Nitrosamines (emissions) are formed as a result of reaction between 1 point


Week 2:
Sustainable Hydrocarbons and halogens

https://onlinecourses.nptel.ac.in/noc25_me40/unit?unit=23&assessment=118 1/4
3/22/25, 5:51 PM Introduction to Abrasive Machining and Finishing Processes - - Unit 5 - Week 2: Sustainable Grinding Process

Grinding Amides and hydrocarbons


Process ()
Alkanolamines and nitrites
Lec. 1 : Alkanolamines and amides
Grinding
No, the answer is incorrect.
Fluids and its
Score: 0
Emissions
Accepted Answers:
(unit?
Alkanolamines and nitrites
unit=23&lesso
n=24) 4) ________found in low mineral oil (semi – synthetic) or hydrocarbon free (synthetic) 1 point
oils and used for rust prevention but has negative effect as emission
Lec. 2 :
Sustainable
Grinding NaNO
Process:
Biodegradatio NaNO2

n of Grinding
Fluids (unit? KNO

unit=23&lesso
MgNO
n=25)
No, the answer is incorrect.
Lec 3 : Score: 0
Sustainable
Accepted Answers:
Grinding NaNO2
Process: MQL
in Grinding
5) What is the use of dual cutting fluid application in grinding 1 point
Process (unit?
(i) Improved surface finish
unit=23&lesso
n=26)
(ii) Reduced grinding zone temperatures
(iii) Synchronized lubrication
Week 2
Feedback form (i), (ii) and (iii)
: Introduction
(ii) and (iii)
to Abrasive
Machining and (i) and (ii)
Finishing (i) and (iii)
Processes
No, the answer is incorrect.
(unit?
Score: 0
unit=23&lesso
Accepted Answers:
n=27)
(i), (ii) and (iii)
Quiz: Week 2
: Assignment 6) Which of the following solid lubricant(s) is/are commonly used in grind wheel 1 point
2 fabrication
(assessment?
name=118)
MoS2

Week 3:
Honing, CaF2

Lapping and
WS2
Super
Finishing. ()
MoS2 , CaF2 , and WS2

Week 4 : No, the answer is incorrect.


Score: 0
Conventiona
Accepted Answers:
l Abrasive
MoS2 , CaF2 , and WS2
Process and

https://onlinecourses.nptel.ac.in/noc25_me40/unit?unit=23&assessment=118 2/4
3/22/25, 5:51 PM Introduction to Abrasive Machining and Finishing Processes - - Unit 5 - Week 2: Sustainable Grinding Process

Surface 7) The sample need to be treated is called as 1 point


Integrity in
Abrasive Influent
Process () Effluent
Exfluent
Week 5 :
Affluent
Advanced
Abrasive No, the answer is incorrect.
Machining Score: 0
Processes () Accepted Answers:
Influent
Week 6 :
Hybrid 8) What is the usual flow rate of cutting fluid used in MQL 1 point
Abrasive
Machining 1 to 10 ml/hr
Processes () 5 to 30 ml/hr
5 to 500 ml/hr
Week 7 :
500 to 2000 ml/hr
Advanced
Abrasive No, the answer is incorrect.
Score: 0
Finishing
Accepted Answers:
Processes-1
5 to 500 ml/hr
()

9) Which of the following fact made researchers to suggest that, angular nozzle 1 point
Week 8 :
Advanced positions are better than horizontal or vertical during machining operation with cutting fluids
Abrasive
Better flow regime will setup
Finishing
Processes-2 To overcome the influence of surrounding air boundaries
() Less power consumption to the nozzle compressor
Angular position is easy to setup
Download
No, the answer is incorrect.
Videos ()
Score: 0
Accepted Answers:
Text To overcome the influence of surrounding air boundaries
Transcripts
()
10) The wetting ability of the grinding fluids on the surface is evaluated by its 1 point

Lecture Wetting angle


Notes ()
Diffusion coefficient

Books () Fourier number


Thermal conductivity

No, the answer is incorrect.


Score: 0
Accepted Answers:
Wetting angle

https://onlinecourses.nptel.ac.in/noc25_me40/unit?unit=23&assessment=118 3/4
3/22/25, 5:51 PM Introduction to Abrasive Machining and Finishing Processes - - Unit 5 - Week 2: Sustainable Grinding Process

https://onlinecourses.nptel.ac.in/noc25_me40/unit?unit=23&assessment=118 4/4

You might also like