Scribd
Upload
28 views4 pages

Quiz 1 2024 W Solution - PDF Version 1

The document outlines calculations for the design strengths of various built-up tension members made from different steel sections, including C300 x 44.7 and W 16x67, using NSCP 2015 LRFD guidelines. It details the determination of live loads that can be carried based on yield and rupture stresses, as well as shear stresses of bolts. Additionally, it provides specific properties of the steel sections and the resulting calculations for maximum live loads in each case.

Uploaded by

Jack Aaron Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views4 pages

Quiz 1 2024 W Solution - PDF Version 1

The document outlines calculations for the design strengths of various built-up tension members made from different steel sections, including C300 x 44.7 and W 16x67, using NSCP 2015 LRFD guidelines. It details the determination of live loads that can be carried based on yield and rupture stresses, as well as shear stresses of bolts. Additionally, it provides specific properties of the steel sections and the resulting calculations for maximum live loads in each case.

Uploaded by

Jack Aaron Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SET A

1. . The built-up tension member is made of two C300 x 44.7 each,


and one 225mm x 16 mm thick plate connected together by one- 20 mm
diameter bolts in its flange as shown. . It has a span of 5 meters
of A441 steel. Using NSCP 2015 LRFD and use Ct=0.85 , determine the
live load the tension member could carry if the dead load is =500 KN.
Fy= 345 MPa. , Fu= 484 MPa ,
Properties:
C300 x 44.7
A = 5690 mm2 tf = 12 mm
d= 300 mm bf =80.5 mm
tw = 13 mm Ix = 67.43 x 106 mm4
𝑥̅ =17.1 mm Iy = 2.14 x 106 mm4
Solution:
Computing the design strengths.
Consider yield stress:
Ag = 5690 X 2 + (16) (225) = 14,980 mm2
Tu = 0.90 FyAg =0.90 (345MPa)(14,980) = 4,651.29 KN

Consider rupture stress:


Computing the net section:
An = 14,980 – 2(20+3) (16+12) = 13,692 mm2
Tu = 0.75 (484MPa)(0.85x13,692) =4,224.67 KN -----critical
4,224.67 = 1.2 (500) +1.6 L.L
LL.= 2,265.4 KN

2..) The W 16x67 A36 steel with a holes arranged as shown for the 20 mm diameter bolts, is used as tension member. b =40 mm ,
z= 72.5 mm, x= 70 mm, y= 90 mm,. . Determine the critical net area of the W-flange. Using NSCP 2015 ,determine the design
strength considering the rupture stress . use C t = 0.85
Properties of W16 x 67 A36 steel

A = 12,709 mm2 Ix= 397 x106 mm4


d= 415 Sx= 1.92 x106 mm3
tw=10 mm Iy= 49.53 x106 mm4
bf = 260 mm Sy= 0.38 x106 mm3
tf= 17 mm

702 702 34+10


An = 12,709 – 2(23)(17 x 2) -4(23)(10) + 3[4(90)](10) + +2[4(157.5)] [ ]
2
An = 10,975.56 mm2

Tu = 0.75(400)(0.85 x 10,975.56) = 2,798.77 KN

3. A single channel tension member, C6 x 8.2 is connected to a gusset plate of 12 mm thick with a 8 pcs.
20 mm diameter bolt as shown. A36 steel is used. A service deadload of 160 KN. Use NSCP 2015.
Provision
S1 = 30 mm S2= 60 mm S3= 45 mm , assume shear stress of bolt, F nv=450 MPa,
a..) What is design strength of the member considering the yield stress, the rupture stress and the shear stress
of the bolt/ ( assume U=0.78)
b) Considering the critical design strengths , What is the maximum live load that can be carried by the member.?
.

Properties of C6x8.2
A = 1,542 mm2
d= 152.4 mm
tw= 5.08 mm
bf = 48.77 mm
tf = 8.71 mm
x = 25.07 mm

Solution:
Computing the design strengths.
Consider yield stress:

Tu = 0.90 FyAg =0.90 (248MPa)(1,542) = 344.17 KN

Consider rupture stress:


Computing the net section:
An = 1,542 – 2(20+3) (5,08) = 1,308.32 mm2
Tu = 0.75 (400MPa)(0.78x1,308.32) =306.14 KN → critical
𝑇 𝑇
𝜏= =𝜋
𝐴 ⅆ 2𝑁
4
𝑇
0.75(450)= 𝜋
(20)2(8)
4
T=804.23 KN
306.14 = 1.2 (160) +1.6 L.L
LL.= 71.34 KN

Name:___________________________________Course & Sec.__________________ SET B


2. . The built-up tension member is made of two C300 x 44.7 each,
and one 280mm x 12 mm thick plate connected together by one- 20 mm
diameter bolts in its flange as shown. . It has a span of 5 meters
of A36 steel. Using NSCP 2015 LRFD and use Ct=0.85 , determine the
live load the tension member could carry if the dead load is =500 KN.
Fy= 248 MPa. , Fu= 400 MPa ,
Properties:
C300 x 44.7
A = 5690 mm2 tf = 12 mm
d= 300 mm bf =80.5 mm
tw = 13 mm Ix = 67.43 x 106 mm4
𝑥̅ =17.1 mm Iy = 2.14 x 106 mm4
Solution:
Computing the design strengths.
Consider yield stress:
Ag = 5690 X 2 + (12) (280) = 14,740 mm2
Tu = 0.90 FyAg =0.90 (248MPa)(14,740) = 3,289.97 KN -----critical

Consider rupture stress:


Computing the net section:
An = 14,740 – 2(20+3) (12+12) = 13,632 mm2
Tu = 0.75 (400MPa)(0.85x13,636) =3,477.18 KN
3,289.97 = 1.2 (500) +1.6 L.L
LL.= 1,681.23 KN

2..) The W 16x67 A36 steel with a holes arranged as shown for the 20 mm diameter bolts, is used as tension member.
b =40 mm , z= 65 mm, x= 80 mm, y= 95 mm ,. .) Determine the critical net area of the W-flange. Using NSCP 2015 ,determine the
design strength considering the rupture stress . use C t = 0.85
Properties of W16 x 67 A441 steel

Fy= 345 MPa. , Fu= 484 MPa ,

A = 12,709 mm2 Ix= 397 x106 mm4


d= 415 Sx= 1.92 x106 mm3
tw=10 mm Iy= 49.53 x106 mm4
bf = 260 mm Sy= 0.38 x106 mm3
tf= 17 mm

802 702 34+10


An = 12,709 – 2(23)(17 x 2) -4(23)(10) + 3[ ](10) + +2[4(150)] [ 2 ]
4(95)
An = 11,199.60 mm2

Tu = 0.75(484)(0.85 x 11,199.6 = 3,455.64 KN

3. A single channel tension member, C6 x 8.2 is connected to a gusset plate of 12 mm thick with a 8 pcs.
20 mm diameter bolt as shown. A36 steel is used. A service deadload of 160 KN. Use NSCP 2015.
Provision
S1 = 40 mm S2= 70 mm S3= 50 mm , assume shear stress of bolt, F nv=457 MPa,
a..) What is design strength of the member considering the yield stress, the rupture stress and the shear stress
of the bolt/ ( assume U=0.70)
b) Considering the critical design strengths , What is the maximum live load that can be carried by the member.?
.

Properties of C6x8.2
A = 1,542 mm2
d= 152.4 mm
tw= 5.08 mm
bf = 48.77 mm
tf = 8.71 mm
x = 25.07 mm

Solution:
Computing the design strengths.
Consider yield stress:

Tu = 0.90 FyAg =0.90 (248MPa)(1,542) = 344.17 KN

Consider rupture stress:


Computing the net section:
An = 1,542 – 2(20+3) (5,08) = 1,308.32 mm2
Tu = 0.75 (400MPa)(0.70x1,308.32) =274.75 KN → critical
𝑇 𝑇
𝜏= =𝜋
𝐴 ⅆ 2𝑁
4
𝑇
0.75(450)= 𝜋
(20)2(8)
4
T=861.45 KN
274.75 = 1.2 (160) +1.6 L.L
LL.= 51.72 KN

You might also like