Scribd
Upload
9 views3 pages

Timed Assignment

The document outlines the assignment details for the course 'Automotive Control Systems' at Birla Institute of Technology & Science, Pilani, for the academic year 2024-25. Students are required to design a PID controller for a DC motor, simulate its response using MATLAB/Simulink, and submit their work by October 28, 2024. Key deliverables include a block diagram, PID tuning parameters, response plots, and a detailed analysis.

Uploaded by

ANIRUDH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views3 pages

Timed Assignment

The document outlines the assignment details for the course 'Automotive Control Systems' at Birla Institute of Technology & Science, Pilani, for the academic year 2024-25. Students are required to design a PID controller for a DC motor, simulate its response using MATLAB/Simulink, and submit their work by October 28, 2024. Key deliverables include a block diagram, PID tuning parameters, response plots, and a detailed analysis.

Uploaded by

ANIRUDH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Birla Institute of Technology & Science, Pilani

Work Integrated Learning Programmes Division


AY 2024-25 S1

EC-1: Timed Assignment

Course No. : AEL/AE ZG510


Course Title : Automotive Control Systems
Weightage : 10 points (200 Marks for Course)
Submission deadline : 28 OCT 2024, 6:00 PM IST
Date assigned : 14 OCT 2024
No. of pages in this document: 3
Instructions (Please read carefully):
I. This assignment is worth 10 points.
II. Upload your submission through the Taxila system as per the deadline noted above. The system will not
accept submissions past the deadline. Submissions left in DRAFT mode will not be evaluated.
III. Your submission MUST be a SINGLE FILE in pdf format (not exceeding 10 MB) – the system will
accept only a single file towards your submission.
IV. Submissions outside the Taxila system (such e-mails, WhatsApp etc.) will be neither acknowledged nor
considered for evaluation.
V. Before you upload, ensure that (1) you are submitting the right document, (2) the document is a clear scan
(if scanned), and legible if handwritten, and (4) your name & BITS ID are indicated.
VI. If you face system difficulties with your submission, contact the student help desk for support.

Page 1 of 3
Question:

Report submission

1. Design a PID controller to control the speed of a DC motor and simulate its response using
MATLAB/Simulink.

System Model:

The dynamics of a simple DC motor can be represented by the following transfer function:

Given Parameters:

 Moment of inertia J=0.01 kg⋅m^2


 Damping coefficient b=0.1 N⋅m⋅s
 Motor torque constant KT=0.01 Nm/A
 Back EMF constant Ke=0.01 V⋅s/rad
 Armature resistance R=1 Ω
 Armature inductance L=0.5 H

Step 1: Substitute these values into the transfer function formula:

Step 2: Simplify the expression: [3]

Steps for the Assignment:


1. Model the DC Motor:
Use the transfer function provided to model the motor in Simulink or MATLAB. [2]
2. Design a PID Controller:
Implement a PID controller to control the speed of the motor. The control objective is to achieve the
desired speed while minimizing overshoot, rise time, and steady-state error. [2]
3. Tune the PID Parameters:
Adjust the proportional (P), integral (I), and derivative (D) gains to improve system performance.
Use trial and error or a tuning method like Manual or Automatic. [2]
4. Simulate the System Response:
Simulate the closed-loop response of the motor speed to a step input. Compare the system’s
behaviour with and without the PID controller, explain in your own words. [1]

Page 2 of 3
Deliverables:

o Block diagram of the motor and controller in Simulink.


o PID tuning parameters and justification for chosen values.
o Plots of system response (speed vs. time) with and without the PID controller.
o Analysis of the results

NOTE 1: Each and every output screen shot is necessary for the model which you are going to create.

NOTE 2: where ever we said to explain, explanation should be Min 6 lines.

NOTE 3: The evaluation will be based up the answer key.

-§§§§§§§§§§§-

Page 3 of 3

You might also like