management System

INTRODUCTION
College event Management Management System is being developed to
fulfill all the needs and requirements at management level. It is integrated with the
all management daily operations including activities, feedback, event. It is a web
based system that facilitates the running of college event, events or activities,
feedback of each event and displaying the achievements of management. The user
will login in the system with login id and password. Users are individuals who
interact with the system. All user interaction is performed through the user's web
browser. Users are provided with an online registration form before event user
should fill online form and submit details these details are compared with details in
database and if they match then user is provided with username and password
using this information user can login and event. If conditions are not correct entry
will be cancelled. It contains two level of user’s administrator level and voter level
where each level has different functionality. Management System software
manages complete management working system. It will have all the basic modules
and also it makes have all the basic modules and also it makes working fully
computerized which is very fast and efficient. College event Management
Management System is a software application which maintains records of the
students, Candidates, Users. This software is planned for event purpose which
saves lot of time and money, the event creation to take feedback from students for
any event happen in the management. It is a complete online project, for a firm to
run it successfully. It is compulsory to take feedback from clients. The front-end
will be HTML pages. Java code will be used for validation and processing of user
input and database it will act as a middle layer. Third layer of database will be
interacted with these layers, which would be MYSQL database. The web server
would be Apache Tomcat.
Abstract

College event Management Management System is essential for an

institution or to a college or to a university, which utilizes computer, also which
reduces manpower. Main objective of this study is an important step towards
streamlining this effort is to develop a framework and identify necessary properties
that a secure and trusted online management working system must satisfy to reduce
discovery redundancy. Such a framework will allow us to evaluate as well as
compare the merits of existing and future candidate in management. System should
support multi-user environment. System should be fully automated. System should
provide concrete security features like creating users and assigning privileges to
users of the system. System should be capable to keep track of all the detailed
descriptions of the client and the whole details of services offered by the client.

Literature Survey:
[1] Developing an Information Management Strategy for Monash University
Author: A. Treloar
Abstract: This paper discusses the development of an information management
strategy for Monash University, focusing on aligning information management
practices with the institution's strategic goals. The study emphasizes the
importance of creating a coherent strategy to manage information effectively,
enhancing decision-making processes and operational efficiency within the
university context.

[2] Level of Entrepreneurial Intention of the Management Undergraduates in

the University of Jaffna, Sri Lanka: Scholars and Undergraduates Perspective
Authors: S. Achchuthan & B. Nimalathasan
Abstract: This research explores the entrepreneurial intentions of management
undergraduates at the University of Jaffna, Sri Lanka, from both scholars' and
undergraduates' perspectives. It examines factors influencing entrepreneurial
intention and provides insights into how educational and personal factors
contribute to the development of entrepreneurial attitudes among students.

[3] Management Information Systems

Authors: S. Haag, M. Cummings, & J. Dawkins
Abstract: The paper provides an overview of management information systems
(MIS), focusing on their role in business operations and decision-making. It covers
the various components of MIS, including hardware, software, data management,
and networking, and explores their impact on organizational effectiveness and
efficiency.

[4] Management Information Systems

Author: T. Lucey
Abstract: This book offers a comprehensive introduction to management
information systems (MIS), detailing the principles and applications of MIS in
business settings. It discusses the development, implementation, and management
of information systems, and highlights their importance in supporting business
operations and strategic decision-making.

[5] Essentials of Management Information Systems

Authors: K. C. Laudon & J. P. Laudon
Abstract: This textbook provides a foundational understanding of management
information systems (MIS), covering essential concepts and practices. It addresses
the role of MIS in organizations, including system development, data management,
and the strategic use of information technology to achieve business objectives.

Existing System
 Although there are many education based managements, there are less
computerized management systems to manage such managements in Sri Lanka
especially in northern part. Considering the fact that there are around fifty
managements in Sri Lankan universities and University Grant Commission is the
main organization which has the right to co-ordinate the functions in these
managements. At present, most of the managements organizing and managing
activities have been done manually. According to the situation of current analysis
managements faces difficulties when they managing the routine works that has
been done by them.

Disadvantage

● Data security and reliability Time consumption during their process.

● High cost activities.
● Data Validations.
● Difficult to produce analytical reports
● Hard to fill data entry forms.
● No user friendliness.
● It takes too much time to get the details of any of the student and
employee, book etc. Need a lot of paper work (registers).
● Entry mistake are another problem for the system and have drawback of
accuracy of result obtained.

Proposed System
The main objective is to develop a project which is an important step
towards streamlining this effort is to develop a framework and identify necessary
properties that a secure and trusted online management working system must
satisfy to reduce discovery redundancy. Such a framework will allow us to
evaluate as well as compare the merits of existing and future candidate in
management. System should support multi-user environment. System should be
fully automated. System should provide concrete security features like admin
creating users (students) and assigning privileges to them. System should be
capable to keep track of all the detailed descriptions of the activities and the whole
details of services offered by the admin. College management system can help to
get all or a particular student attendance information. Also it can help to maintain
the fees and accounting reports of college in proper way. This system also helps to
generate mark sheets of current year.

Advantage
● The benefits of college management system for the employee are they can
create any kind of certificate easily using this system.
● They can easily retrieve all information related to student and employee.
Admin has all the Collective records of students of all the branches.
● Admin can check all the records of employees of all managements anytime.
● This system gives easy approach to find the detail information for any
student/employee.
● Using this college management system it is very easy to handle all
functionality of college.
● This system is beneficial for both students and employees as they can get all
previous or current information when they need.
 ● This system is also helpful to maintain the student’s record like admission
record, fees record, exam result records.

HARDWARE AND SOFTWARE SPECIFICATION:

Software Requirement:

1. Language - Java (JDK 1.7)

2. OS - Windows 7- 32bit
3. MySql Server
4. Android ADK

Hardware Requirement:

1. 1 GB RAM
2. 80 GB Hard Disk
3. Above 2GHz Processor
 4. Android Mobile With GPRS

DATA FLOW DIAGRAM

Level 0:
Level 1:
Level 2:
 UML Diagram
Use Case Diagram:
Class Diagram:
Sequence Diagram:
Activity Diagram:
Java (programming language)

History

The JAVA language was created by James Gosling in June 1991 for use in a
set top box project. The language was initially called Oak, after an oak tree that
stood outside Gosling's office - and also went by the name Green - and ended up
later being renamed to Java, from a list of random words. Gosling's goals were to
implement a virtual machine and a language that had a familiar C/C++ style of
notation. The first public implementation was Java 1.0 in 1995. It promised "Write
Once, Run Anywhere” (WORA), providing no-cost runtimes on popular platforms.
It was fairly secure and its security was configurable, allowing network and file
access to be restricted. Major web browsers soon incorporated the ability to run
secure Java applets within web pages. Java quickly became popular. With the
advent of Java 2, new versions had multiple configurations built for different types
of platforms. For example, J2EE was for enterprise applications and the greatly
stripped down version J2ME was for mobile applications. J2SE was the
designation for the Standard Edition. In 2006, for marketing purposes, new J2
versions were renamed Java EE, Java ME, and Java SE, respectively.

In 1997, Sun Microsystems approached the ISO/IEC JTC1 standards

bodyand later the Ecma International to formalize Java, but it soon withdrew from
the process. Java remains a standard that is controlled through the Java Community
Process. At one time, Sun made most of its Java implementations available without
charge although they were proprietary software. Sun's revenue from Java was
generated by the selling of licenses for specialized products such as the Java
Enterprise System. Sun distinguishes between its Software Development Kit
(SDK) and Runtime Environment (JRE)which is a subset of the SDK, the primary
distinction being that in the JRE, the compiler, utility programs, and many
necessary header files are not present.

On 13 Novmber2006, Sun released much of Java as free softwareunder the

terms of the GNU General Public License(GPL). On 8 May2007Sun finished the
process, making all of Java's core code open source, aside from a small portion of
code to which Sun did not hold the copyright.

Primary goals

There were five primary goals in the creation of the Java language:

● It should use the object-oriented programming methodology.

● It should allow the same program to be executed on multiple
operating systems.
● It should contain built-in support for using computer networks.
● It should be designed to execute code from remote sources securely.
● It should be easy to use by selecting what were considered the good
parts of other object-oriented languages

The Java Programming Language:

The Java programming language is a high-level language that can be

characterized by all of the following buzzwords:

● Simple
● Architecture neutral
● Object oriented
● Portable
● Distributed
 ● High performance

Each of the preceding buzzwords is explained in The Java Language

Environment , a white paper written by James Gosling and Henry McGilton.

In the Java programming language, all source code is first written in plain
text files ending with the .java extension. Those source files are then compiled
into .class files by the javac compiler.

A .class file does not contain code that is native to your processor; it
instead contains byte codes — the machine language of the Java Virtual Machine 1
(Java VM). The java launcher tool then runs your application with an instance of
the Java Virtual Machine.

An overview of the software development process.

 Because the Java VM is available on many different operating systems, the
TM
same .class files are capable of running on Microsoft Windows, the Solaris
Operating System (Solaris OS), Linux, or Mac OS. Some virtual machines, such as
the Java Hot Spot virtual machineperform additional steps at runtime to give your
application a performance boost. This include various tasks such as finding
performance bottlenecks and recompiling (to native code) frequently used sections
of code.

Through the Java VM, the same application is capable of

running on multiple platforms.

The Java Platform

A platform is the hardware or software environment in which a program
runs. We've already mentioned some of the most popular platforms like Microsoft
Windows, Linux, Solaris OS, and Mac OS. Most platforms can be described as a
combination of the operating system and underlying hardware. The Java platform
differs from most other platforms in that it's a software-only platform that runs on
top of other hardware-based platforms.

The Java platform has two components:

The Java Virtual Machine

The Java Application Programming Interface (API)

You've already been introduced to the Java Virtual Machine; it's the base for
the Java platform and is ported onto various hardware-based platforms.

The API is a large collection of ready-made software components that

provide many useful capabilities. It is grouped into libraries of related classes and
interfaces; these libraries are known as packages. The next section, What
CanJavaTechnologyDo?Highlights some of the functionality provided by the API.

The API and Java Virtual Machine insulate the program from
the underlying hardware.

As a platform-independent environment, the Java platform can be a bit

slower than native code. However, advances in compiler and virtual machine
technologies are bringing performance close to that of native code without
threatening portability.
Java Runtime Environment

The Java Runtime Environment, or JRE, is the software required to run any
application deployed on the Java Platform. End-users commonly use a JRE in
software packages and Web browser plug-in. Sun also distributes a superset of the
JRE called the Java 2 SDK(more commonly known as the JDK), which includes
development tools such as the Javacompiler,Javadoc, Jarand debugger.

One of the unique advantages of the concept of a runtime engine is that

errors (exceptions) should not 'crash' the system. Moreover, in runtime engine
environments such as Java there exist tools that attach to the runtime engine and
every time that an exception of interest occurs they record debugging information
that existed in memory at the time the exception was thrown (stack and heap
values). These Automated Exception Handling tools provide 'root-cause'
information for exceptions in Java programs that run in production, testing or
development environments.

Uses OF JAVA

Blue is a smart card enabled with the secure, cross-platform, object-oriented

Java Card API and technology. Blue contains an actual on-card processing chip,
allowing for enhance able and multiple functionality within a single card. Applets
that comply with the Java Card API specification can run on any third-party vendor
card that provides the necessary Java Card Application Environment (JCAE). Not
only can multiple applet programs run on a single card, but new applets and
functionality can be added after the card is issued to the customer

● Java Can be used in Chemistry.

 ● In NASA also Java is used.
● In 2D and 3D applications java is used.
● In Graphics Programming also Java is used.
● In Animations Java is used.
● In Online and Web Applications Java is used.

JSP :

JavaServer Pages (JSP) is a Java technology that allows software

developers to dynamically generate HTML, XML or other types of documents in
response to a Web client request. The technology allows Java code and certain pre-
defined actions to be embedded into static content.

The JSP syntax adds additional XML-like tags, called JSP actions, to be
used to invoke built-in functionality. Additionally, the technology allows for the
creation of JSP tag libraries that act as extensions to the standard HTML or XML
tags. Tag libraries provide a platform independent way of extending the
capabilities of a Web server.

JSPs are compiled into Java Servlet by a JSP compiler. A JSP compiler may
generate a servlet in Java code that is then compiled by the Java compiler, or it
may generate byte code for the servlet directly. JSPs can also be interpreted on-the-
fly reducing the time taken to reload changes

JavaServer Pages (JSP) technology provides a simplified, fast way to create

dynamic web content. JSP technology enables rapid development of web-based
applications that are server and platform-independent.
Architecture OF JSP

The Advantages of JSP

Active Server Pages (ASP). ASP is a similar technology from Microsoft.
The advantages of JSP are twofold. First, the dynamic part is written in Java, not
Visual Basic or other MS-specific language, so it is more powerful and easier to
use. Second, it is portable to other operating systems and non-Microsoft Web
servers. Pure Servlet. JSP doesn't give you anything that you couldn't in principle
do with a Servlet. But it is more convenient to write (and to modify!) regular
HTML than to have a zillion println statements that generate the HTML. Plus, by
separating the look from the content you can put different people on different
tasks: your Web page design experts can build the HTML, leaving places for your
Servlet programmers to insert the dynamic content.
 Server-Side Includes (SSI). SSI is a widely-supported technology for
including externally-defined pieces into a static Web page. JSP is better because it
lets you use Servlet instead of a separate program to generate that dynamic part.
Besides, SSI is really only intended for simple inclusions, not for "real" programs
that use form data, make database connections, and the like. JavaScript. JavaScript
can generate HTML dynamically on the client. This is a useful capability, but only
handles situations where the dynamic information is based on the client's
environment.

With the exception of cookies, HTTP and form submission data is not
available to JavaScript. And, since it runs on the client, JavaScript can't access
server-side resources like databases, catalogs, pricing information, and the like.
Static HTML. Regular HTML, of course, cannot contain dynamic information. JSP
is so easy and convenient that it is quite feasible to augment HTML pages that only
benefit marginally by the insertion of small amounts of dynamic data. Previously,
the cost of using dynamic data would preclude its use in all but the most valuable
instances.

ARCHITECTURE OF JSP
 ● The browser sends a request to a JSP page.
● The JSP page communicates with a Java bean.
● The Java bean is connected to a database.
● The JSP page responds to the browser.

SERVLETS – FRONT END

The Java Servlet API allows a software developer to add dynamic content to
a Web server using the Java platform. The generated content is commonly HTML,
but may be other data such as XML. Servlet are the Java counterpart to non-Java
dynamic Web content technologies such as PHP, CGI and ASP.NET. Servlet can
maintain state across many server transactions by using HTTP cookies, session
variables or URL rewriting.
 The Servlet API, contained in the Java package hierarchy javax. Servlet,
defines the expected interactions of a Web container and a Servlet. A Web
container is essentially the component of a Web server that interacts with the
Servlet. The Web container is responsible for managing the lifecycle of Servlet,
mapping a URL to a particular Servlet and ensuring that the URL requester has the
correct access rights.

A Servlet is an object that receives a request and generates a response based

on that request. The basic Servlet package defines Java objects to represent Servlet
requests and responses, as well as objects to reflect the Servlet configuration
parameters and execution environment. The package javax .Servlet. Http defines
HTTP-specific subclasses of the generic Servlet elements, including session
management objects that track multiple requests and responses between the Web
server and a client. Servlet may be packaged in a WAR file as a Web application.

Servlet can be generated automatically by Java Server Pages(JSP), or

alternately by template engines such as Web Macro. Often Servlet are used in
conjunction with JSPs in a pattern called "Model 2”, which is a flavour of the
model-view-controller pattern.

Servlet are Java technology's answer to CGI programming. They are

programs that run on a Web server and build Web pages. Building Web pages on
the fly is useful (and commonly done) for a number of reasons:.

The Web page is based on data submitted by the user. For example the
results pages from search engines are generated this way, and programs that
process orders for e-commerce sites do this as well. The data changes frequently.
For example, a weather-report or news headlines page might build the page
dynamically, perhaps returning a previously built page if it is still up to date. The
Web page uses information from corporate databases or other such sources. For
example, you would use this for making a Web page at an on-line store that lists
current prices and number of items in stock.

The Servlet Run-time Environment

A Servlet is a Java class and therefore needs to be executed in a Java VM by
a service we call a Servlet engine. The Servlet engine loads the servlet class the
first time the Servlet is requested, or optionally already when the Servlet engine is
started. The Servlet then stays loaded to handle multiple requests until it is
explicitly unloaded or the Servlet engine is shut down.

Some Web servers, such as Sun's Java Web Server (JWS), W3C's Jigsaw
and Gefion Software's Lite Web Server (LWS) are implemented in Java and have a
built-in Servlet engine. Other Web servers, such as Netscape's Enterprise Server,
Microsoft's Internet Information Server (IIS) and the Apache Group's Apache,
require a Servlet engine add-on module. The add-on intercepts all requests for
Servlet, executes them and returns the response through the Web server to the
client. Examples of Servlet engine add-ons are Gefion Software's WAI Cool
Runner, IBM's Web Sphere, Live Software's JRun and New Atlanta's Servlet Exec.

All Servlet API classes and a simple Servlet-enabled Web server are
combined into the Java Servlet Development Kit (JSDK), available for download
at Sun's official Servlet site .To get started with Servlet I recommend that you
download the JSDK and play around with the sample Servlet.

Life Cycle OF Servlet

● The Servlet lifecycle consists of the following steps:

● The Servlet class is loaded by the container during start-up.
 The container calls the init() method. This method initializes the Servlet and
must be called before the Servlet can service any requests. In the entire life of a
Servlet, the init() method is called only once. After initialization, the Servlet can
service client-requests.

Each request is serviced in its own separate thread. The container calls the
service() method of the Servlet for every request.

The service() method determines the kind of request being made and
dispatches it to an appropriate method to handle the request. The developer of the
Servlet must provide an implementation for these methods. If a request for a
method that is not implemented by the Servlet is made, the method of the parent
class is called, typically resulting in an error being returned to the requester.
Finally, the container calls the destroy() method which takes the Servlet out of
service. The destroy() method like init() is called only once in the lifecycle of a
Servlet.

● Request and Response Objects

The do Get method has two interesting parameters: HttpServletRequest and
HttpServletResponse. These two objects give you full access to all information
about the request and let you control the output sent to the client as the response to
the request. With CGI you read environment variables and stdin to get information
about the request, but the names of the environment variables may vary between
implementations and some are not provided by all Web servers.

The HttpServletRequest object provides the same information as the CGI

environment variables, plus more, in a standardized way. It also provides methods
for extracting HTTP parameters from the query string or the request body
depending on the type of request (GET or POST). As a Servlet developer you
access parameters the same way for both types of requests. Other methods give
you access to all request headers and help you parse date and cookie headers.

Instead of writing the response to stdout as you do with CGI, you get an
OutputStream or a PrintWriter from the HttpServletResponse. The OuputStream is
intended for binary data, such as a GIF or JPEG image, and the PrintWriter for text
output. You can also set all response headers and the status code, without having to
rely on special Web server CGI configurations such as Non Parsed Headers (NPH).
This makes your Servlet easier to install.

ServletConfig and Servlet Context:

There is only one Servlet Context in every application. This object can be
used by all the Servlet to obtain application level information or container details.
Every Servlet, on the other hand, gets its own ServletConfig object. This object
provides initialization parameters for a servlet. A developer can obtain the
reference to Servlet Context using either the ServletConfig object or Servlet
Request object.

All servlets belong to one servlet context. In implementations of the 1.0 and
2.0 versions of the Servlet API all servlets on one host belongs to the same context,
but with the 2.1 version of the API the context becomes more powerful and can be
seen as the humble beginnings of an Application concept. Future versions of the
API will make this even more pronounced.

Many servlet engines implementing the Servlet 2.1 API let you group a set
of servlets into one context and support more than one context on the same host.
The Servlet Context in the 2.1 API is responsible for the state of its servlets and
knows about resources and attributes available to the servlets in the context. Here
we will only look at how Servlet Context attributes can be used to share
information among a group of servlets.

There are three Servlet Context methods dealing with context attributes: get
Attribute, set Attribute and remove Attribute. In addition the servlet engine may
provide ways to configure a servlet context with initial attribute values. This serves
as a welcome addition to the servlet initialization arguments for configuration
information used by a group of servlets, for instance the database identifier we
talked about above, a style sheet URL for an application, the name of a mail server,
etc.

JDBC

Java Database Connectivity (JDBC) is a programming framework for Java

developers writing programs that access information stored in databases,
spreadsheets, and flat files. JDBC is commonly used to connect a user program to a
"behind the scenes" database, regardless of what database management software is
used to control the database. In this way, JDBC is cross-platform. This article will
provide an introduction and sample code that demonstrates database access from
Java programs that use the classes of the JDBC API, which is available for free
download from Sun's site.

A database that another program links to is called a data source. Many data
sources, including products produced by Microsoft and Oracle, already use a
standard called Open Database Connectivity (ODBC). Many legacy C and Perl
programs use ODBC to connect to data sources. ODBC consolidated much of the
commonality between database management systems. JDBC builds on this feature,
and increases the level of abstraction. JDBC-ODBC bridges have been created to
allow Java programs to connect to ODBC-enabled database software.
JDBC Architecture

Two-tier and Three-tier Processing Models

The JDBC API supports both two-tier and three-tier processing models for
database access.

In the two-tier model, a Java applet or application talks directly to the data
source. This requires a JDBC driver that can communicate with the particular data
source being accessed. A user's commands are delivered to the database or other
data source, and the results of those statements are sent back to the user. The data
source may be located on another machine to which the user is connected via a
network. This is referred to as a client/server configuration, with the user's machine
as the client, and the machine housing the data source as the server. The network
can be an intranet, which, for example, connects employees within a corporation,
or it can be the Internet.

In the three-tier model, commands are sent to a "middle tier" of services,

which then sends the commands to the data source. The data source processes the
commands and sends the results back to the middle tier, which then sends them to
the user.
 MIS directors find the three-tier model very attractive because the middle
tier makes it possible to maintain control over access and the kinds of updates that
can be made to corporate data. Another advantage is that it simplifies the
deployment of applications. Finally, in many cases, the three-tier architecture can
provide performance advantages.

Until recently, the middle tier has often been written in languages such as C
or C++, which offer fast performance. However, with the introduction of
optimizing compilers that translate Java byte code into efficient machine-specific
code and technologies such as Enterprise JavaBeans™, the Java platform is fast
becoming the standard platform for middle-tier development. This is a big plus,
making it possible to take advantage of Java's robustness, multithreading, and
security features.

With enterprises increasingly using the Java programming language for

writing server code, the JDBC API is being used more and more in the middle tier
of a three-tier architecture. Some of the features that make JDBC a server
technology are its support for connection pooling, distributed transactions, and
disconnected rowsets. The JDBC API is also what allows access to a data source
from a Java middle tier.

Testing

The various levels of testing are

1. White Box Testing

2. Black Box Testing
3. Unit Testing
4. Functional Testing
5. Performance Testing
6. Integration Testing
7. Objective
8. Integration Testing
9. Validation Testing
10.System Testing
11.Structure Testing
12.Output Testing
13.User Acceptance Testing

White Box Testing

White-box testing (also known as clear box testing, glass box

testing, transparent box testing, and structural testing) is a method of
testing software that tests internal structures or workings of an application, as
opposed to its functionality (i.e. black-box testing). In white-box testing an internal
perspective of the system, as well as programming skills, are used to design test
cases. The tester chooses inputs to exercise paths through the code and determine
the appropriate outputs. This is analogous to testing nodes in a circuit, e.g. in-
circuit testing (ICT).

While white-box testing can be applied at

the unit, integration and system levels of the software testing process, it is usually
done at the unit level. It can test paths within a unit, paths between units during
integration, and between subsystems during a system–level test. Though this
method of test design can uncover many errors or problems, it might not detect
unimplemented parts of the specification or missing requirements.

White-box test design techniques include:

● Control flow testing

● Data flow testing
● Branch testing
● Path testing
● Statement coverage
● Decision coverage

White-box testing is a method of testing the application at the level of the

source code. The test cases are derived through the use of the design techniques
mentioned above: control flow testing, data flow testing, branch testing, path
testing, statement coverage and decision coverage as well as modified
condition/decision coverage. White-box testing is the use of these techniques as
guidelines to create an error free environment by examining any fragile code.
 These White-box testing techniques are the building blocks of white-box
testing, whose essence is the careful testing of the application at the source code
level to prevent any hidden errors later on. These different techniques exercise
every visible path of the source code to minimize errors and create an error-free
environment. The whole point of white-box testing is the ability to know which
line of the code is being executed and being able to identify what the correct output
should be.

Levels

1. Unit testing. White-box testing is done during unit testing to ensure that the
code is working as intended, before any integration happens with previously
tested code. White-box testing during unit testing catches any defects early
on and aids in any defects that happen later on after the code is integrated
with the rest of the application and therefore prevents any type of errors
later on.
2. Integration testing. White-box testing at this level are written to test the
interactions of each interface with each other. The Unit level testing made
sure that each code was tested and working accordingly in an isolated
environment and integration examines the correctness of the behaviour in an
open environment through the use of white-box testing for any interactions
of interfaces that are known to the programmer.
3. Regression testing. White-box testing during regression testing is the use of
recycled white-box test cases at the unit and integration testing levels.

White-box testing's basic procedures involve the understanding of the source

code that you are testing at a deep level to be able to test them. The programmer
must have a deep understanding of the application to know what kinds of test cases
to create so that every visible path is exercised for testing. Once the source code is
understood then the source code can be analysed for test cases to be created. These
are the three basic steps that white-box testing takes in order to create test cases:

1. Input, involves different types of requirements, functional specifications,

detailed designing of documents, proper source code, security
specifications. This is the preparation stage of white-box testing to layout all
of the basic information.
2. Processing Unit, involves performing risk analysis to guide whole testing
process, proper test plan, execute test cases and communicate results. This is
the phase of building test cases to make sure they thoroughly test the
application the given results are recorded accordingly.
3. Output, prepare final report that encompasses all of the above preparations
and results.

Black Box Testing

Black-box testing is a method of software testing that examines the

functionality of an application (e.g. what the software does) without peering into
its internal structures or workings (see white-box testing). This method of test can
be applied to virtually every level of software
testing: unit, integration,system and acceptance. It typically comprises most if not
all higher level testing, but can also dominate unit testing as well

Test procedures
 Specific knowledge of the application's code/internal structure and
programming knowledge in general is not required. The tester is aware of what the
software is supposed to do but is not aware of how it does it. For instance, the
tester is aware that a particular input returns a certain, invariable output but is not
aware of how the software produces the output in the first place.

Test cases

Test cases are built around specifications and requirements, i.e., what the
application is supposed to do. Test cases are generally derived from external
descriptions of the software, including specifications, requirements and design
parameters. Although the tests used are primarily functional in nature, non-
functional tests may also be used. The test designer selects both valid and invalid
inputs and determines the correct output without any knowledge of the test object's
internal structure.

Test design techniques

Typical black-box test design techniques include:

● Decision table testing

● All-pairs testing
● State transition tables
● Equivalence partitioning
● Boundary value analysis
Unit testing

In computer programming, unit testing is a method by which individual

units of source code, sets of one or more computer program modules together with
associated control data, usage procedures, and operating procedures are tested to
determine if they are fit for use. Intuitively, one can view a unit as the smallest
testable part of an application. In procedural programming, a unit could be an
entire module, but is more commonly an individual function or procedure.
In object-oriented programming, a unit is often an entire interface, such as a class,
but could be an individual method. Unit tests are created by programmers or
occasionally by white box testers during the development process.

Ideally, each test case is independent from the others. Substitutes such
as method stubs, mock objects, fakes, and test harnesses can be used to assist
testing a module in isolation. Unit tests are typically written and run by software
developers to ensure that code meets its design and behaves as intended. Its
implementation can vary from being very manual (pencil and paper)to being
formalized as part of build automation.

Testing will not catch every error in the program, since it cannot evaluate
every execution path in any but the most trivial programs. The same is true for unit
testing. Additionally, unit testing by definition only tests the functionality of the
units themselves. Therefore, it will not catch integration errors or broader system-
level errors (such as functions performed across multiple units, or non-functional
test areas such as performance).

Unit testing should be done in conjunction with other software

testing activities, as they can only show the presence or absence of particular
errors; they cannot prove a complete absence of errors. In order to guarantee
correct behaviour for every execution path and every possible input, and ensure the
absence of errors, other techniques are required, namely the application of formal
methods to proving that a software component has no unexpected behaviour.

Software testing is a combinatorial problem. For example, every Boolean decision

statement requires at least two tests: one with an outcome of "true" and one with an
outcome of "false". As a result, for every line of code written, programmers often
need 3 to 5 lines of test code.

This obviously takes time and its investment may not be worth the effort.
There are also many problems that cannot easily be tested at all – for example
those that are nondeterministic or involve multiple threads. In addition, code for a
unit test is likely to be at least as buggy as the code it is testing. Fred Brooks in The
Mythical Man-Month quotes: never take two chronometers to sea. Always take one
or three. Meaning, if two chronometers contradict, how do you know which one is
correct?

Another challenge related to writing the unit tests is the difficulty of setting
up realistic and useful tests. It is necessary to create relevant initial conditions so
the part of the application being tested behaves like part of the complete system. If
these initial conditions are not set correctly, the test will not be exercising the code
in a realistic context, which diminishes the value and accuracy of unit test results.

To obtain the intended benefits from unit testing, rigorous discipline is

needed throughout the software development process. It is essential to keep careful
records not only of the tests that have been performed, but also of all changes that
have been made to the source code of this or any other unit in the software. Use of
a version control system is essential. If a later version of the unit fails a particular
test that it had previously passed, the version-control software can provide a list of
the source code changes (if any) that have been applied to the unit since that time.

It is also essential to implement a sustainable process for ensuring that test

case failures are reviewed daily and addressed immediately if such a process is not
implemented and ingrained into the team's workflow, the application will evolve
out of sync with the unit test suite, increasing false positives and reducing the
effectiveness of the test suite.
 Unit testing embedded system software presents a unique challenge: Since
the software is being developed on a different platform than the one it will
eventually run on, you cannot readily run a test program in the actual deployment
environment, as is possible with desktop programs.[7]

Functional testing

Functional testing is a quality assurance (QA) process and a type of black

box testing that bases its test cases on the specifications of the software component
under test. Functions are tested by feeding them input and examining the output,
and internal program structure is rarely considered (not like in white-box
testing). Functional Testing usually describes what the system does.

Functional testing differs from system testing in that functional testing "verifies a
program by checking it against ... design document(s) or specification(s)", while
system testing "validate a program by checking it against the published user or
system requirements" (Kane, Falk, Nguyen 1999, p. 52).

Functional testing typically involves five steps .The identification of functions

that the software is expected to perform

1. The creation of input data based on the function's specifications

2. The determination of output based on the function's specifications
3. The execution of the test case
4. The comparison of actual and expected outputs

Performance testing

In software engineering, performance testing is in

general testing performed to determine how a system performs in terms of
responsiveness and stability under a particular workload. It can also serve to
investigate, measure, validate or verify other quality attributes of the system, such
as scalability, reliability and resource usage.

Performance testing is a subset of performance engineering, an

emerging computer science practice which strives to build performance into the
implementation, design and architecture of a system.

Testing types

Load testing

Load testing is the simplest form of performance testing. A load test is

usually conducted to understand the behaviour of the system under a specific
expected load. This load can be the expected concurrent number of users on
the application performing a specific number of transactions within the set
duration. This test will give out the response times of all the important business
critical transactions. If the database, application server, etc. are also monitored,
then this simple test can itself point towards bottlenecks in the application
software.

Stress testing

Stress testing is normally used to understand the upper limits of capacity

within the system. This kind of test is done to determine the system's robustness in
terms of extreme load and helps application administrators to determine if the
system will perform sufficiently if the current load goes well above the expected
maximum.

Soak testing

Soak testing, also known as endurance testing, is usually done to determine

if the system can sustain the continuous expected load. During soak tests, memory
utilization is monitored to detect potential leaks. Also important, but often
overlooked is performance degradation. That is, to ensure that the throughput
and/or response times after some long period of sustained activity are as good as or
better than at the beginning of the test. It essentially involves applying a significant
load to a system for an extended, significant period of time. The goal is to discover
how the system behaves under sustained use.

Spike testing

Spike testing is done by suddenly increasing the number of or load generated

by, users by a very large amount and observing the behaviour of the system. The
goal is to determine whether performance will suffer, the system will fail, or it will
be able to handle dramatic changes in load.

Configuration testing

Rather than testing for performance from the perspective of load, tests are
created to determine the effects of configuration changes to the system's
components on the system's performance and behaviour. A common example
would be experimenting with different methods of load-balancing.

Isolation testing

Isolation testing is not unique to performance testing but involves repeating

a test execution that resulted in a system problem. Often used to isolate and
confirm the fault domain.

Integration testing
 Integration testing (sometimes called integration and testing,
abbreviated I&T) is the phase in software testing in which individual software
modules are combined and tested as a group. It occurs after unit testing and
before validation testing. Integration testing takes as its input modules that have
been unit tested, groups them in larger aggregates, applies tests defined in an
integration test plan to those aggregates, and delivers as its output the integrated
system ready for system testing.

Purpose

The purpose of integration testing is to verify functional, performance, and

reliability requirements placed on major design items. These "design items", i.e.
assemblages (or groups of units), are exercised through their interfaces using black
box testing, success and error cases being simulated via appropriate parameter and
data inputs. Simulated usage of shared data areas and inter-process
communication is tested and individual subsystems are exercised through their
input interface.

Test cases are constructed to test whether all the components within
assemblages interact correctly, for example across procedure calls or process
activations, and this is done after testing individual modules, i.e. unit testing. The
overall idea is a "building block" approach, in which verified assemblages are
added to a verified base which is then used to support the integration testing of
further assemblages.

Some different types of integration testing are big bang, top-down, and
bottom-up. Other Integration Patterns are: Collaboration Integration, Backbone
Integration, Layer Integration, Client/Server Integration, Distributed Services
Integration and High-frequency Integration.
Big Bang

In this approach, all or most of the developed modules are coupled together
to form a complete software system or major part of the system and then used for
integration testing. The Big Bang method is very effective for saving time in the
integration testing process. However, if the test cases and their results are not
recorded properly, the entire integration process will be more complicated and may
prevent the testing team from achieving the goal of integration testing.

A type of Big Bang Integration testing is called Usage Model testing. Usage
Model Testing can be used in both software and hardware integration testing. The
basis behind this type of integration testing is to run user-like workloads in
integrated user-like environments. In doing the testing in this manner, the
environment is proofed, while the individual components are proofed indirectly
through their use.

Usage Model testing takes an optimistic approach to testing, because it

expects to have few problems with the individual components. The strategy relies
heavily on the component developers to do the isolated unit testing for their
product. The goal of the strategy is to avoid redoing the testing done by the
developers, and instead flesh-out problems caused by the interaction of the
components in the environment.

For integration testing, Usage Model testing can be more efficient and
provides better test coverage than traditional focused functional integration testing.
To be more efficient and accurate, care must be used in defining the user-like
workloads for creating realistic scenarios in exercising the environment. This gives
confidence that the integrated environment will work as expected for the target
customers.
Top-down and Bottom-up

Bottom Up Testing is an approach to integrated testing where the lowest

level components are tested first, then used to facilitate the testing of higher level
components. The process is repeated until the component at the top of the
hierarchy is tested.

All the bottom or low-level modules, procedures or functions are integrated

and then tested. After the integration testing of lower level integrated modules, the
next level of modules will be formed and can be used for integration testing. This
approach is helpful only when all or most of the modules of the same development
level are ready. This method also helps to determine the levels of software
developed and makes it easier to report testing progress in the form of a
percentage.

Top Down Testing is an approach to integrated testing where the top

integrated modules are tested and the branch of the module is tested step by step
until the end of the related module.

Sandwich Testing is an approach to combine top down testing with bottom

up testing.

The main advantage of the Bottom-Up approach is that bugs are more easily found.
With Top-Down, it is easier to find a missing branch link

Verification and validation

Verification and Validation are independent procedures that are used

together for checking that a product, service, or system meets requirements
and specifications and that it full fills its intended purpose. These are critical
components of a quality management system such as ISO 9000. The words
"verification" and "validation" are sometimes preceded with "Independent" (or
IV&V), indicating that the verification and validation is to be performed by
a disinterested third party.

It is sometimes said that validation can be expressed by the query "Are you
building the right thing?" and verification by "Are you building it right?"In
practice, the usage of these terms varies. Sometimes they are even used
interchangeably.

The PMBOK guide, an IEEE standard, defines them as follows in its 4th edition

● "Validation. The assurance that a product, service, or system meets the needs
of the customer and other identified stakeholders. It often involves acceptance
and suitability with external customers. Contrast with verification."
● "Verification. The evaluation of whether or not a product, service, or system
complies with a regulation, requirement, specification, or imposed condition. It
is often an internal process. Contrast with validation."

● Verification is intended to check that a product, service, or system (or

portion thereof, or set thereof) meets a set of initial design specifications. In
the development phase, verification procedures involve performing special
tests to model or simulate a portion, or the entirety, of a product, service or
system, then performing a review or analysis of the modelling results. In the
post-development phase, verification procedures involve regularly repeating
tests devised specifically to ensure that the product, service, or system
continues to meet the initial design requirements, specifications, and
regulations as time progresses. It is a process that is used to evaluate whether
a product, service, or system complies with regulations, specifications, or
conditions imposed at the start of a development phase. Verification can be
in development, scale-up, or production. This is often an internal process.
● Validation is intended to check that development and verification procedures
for a product, service, or system (or portion thereof, or set thereof) result in a
product, service, or system (or portion thereof, or set thereof) that meets
initial requirements. For a new development flow or verification flow,
validation procedures may involve modelling either flow and using
simulations to predict faults or gaps that might lead to invalid or incomplete
verification or development of a product, service, or system (or portion
thereof, or set thereof). A set of validation requirements, specifications, and
regulations may then be used as a basis for qualifying a development flow or
verification flow for a product, service, or system (or portion thereof, or set
thereof). Additional validation procedures also include those that are
designed specifically to ensure that modifications made to an existing
qualified development flow or verification flow will have the effect of
producing a product, service, or system (or portion thereof, or set thereof)
that meets the initial design requirements, specifications, and regulations;
these validations help to keep the flow qualified. It is a process of
establishing evidence that provides a high degree of assurance that a
product, service, or system accomplishes its intended requirements. This
often involves acceptance of fitness for purpose with end users and other
product stakeholders. This is often an external process.

● It is sometimes said that validation can be expressed by the query "Are you
building the right thing?" and verification by "Are you building it
right?". "Building the right thing" refers back to the user's needs, while
"building it right" checks that the specifications are correctly implemented
by the system. In some contexts, it is required to have written requirements
 for both as well as formal procedures or protocols for determining
compliance.

● It is entirely possible that a product passes when verified but fails when
validated. This can happen when, say, a product is built as per the
specifications but the specifications themselves fail to address the user’s
needs.

Activities

Verification of machinery and equipment usually consists of design

qualification (DQ), installation qualification (IQ), operational qualification (OQ),
and performance qualification (PQ). DQ is usually a vendor's job. However, DQ
can also be performed by the user, by confirming through review and testing that
the equipment meets the written acquisition specification. If the relevant document
or manuals of machinery/equipment are provided by vendors, the later 3Q needs to
be thoroughly performed by the users who work in an industrial regulatory
environment. Otherwise, the process of IQ, OQ and PQ is the task of validation.
The typical example of such a case could be the loss or absence of vendor's
documentation for legacy equipment or do-it-yourself (DIY) assemblies (e.g., cars,
computers etc.) and, therefore, users should endeavour to acquire DQ document
beforehand. Each template of DQ, IQ, OQ and PQ usually can be found on the
internet respectively, whereas the DIY qualifications of machinery/equipment can
be assisted either by the vendor's training course materials and tutorials, or by the
published guidance books, such as step-by-step series if the acquisition of
machinery/equipment is not bundled with on- site qualification services. This kind
of the DIY approach is also applicable to the qualifications of software, computer
operating systems and a manufacturing process. The most important and critical
task as the last step of the activity is to generating and archiving
machinery/equipment qualification reports for auditing purposes, if regulatory
compliances are mandatory.

Qualification of machinery/equipment is venue dependent, in particular

items that are shock sensitive and require balancing or calibration, and re-
qualification needs to be conducted once the objects are relocated. The full scales
of some equipment qualifications are even time dependent as consumables are used
up (i.e. filters) or springs stretch out, requiring recalibration, and hence re-
certification is necessary when a specified due time lapse Re-qualification of
machinery/equipment should also be conducted when replacement of parts, or
coupling with another device, or installing a new application software and
restructuring of the computer which affects especially the pre-settings, such as
on BIOS, registry, disk drive partition table, dynamically-linked (shared) libraries,
or an ini file etc., have been necessary. In such a situation, the specifications of the
parts/devices/software and restructuring proposals should be appended to the
qualification document whether the parts/devices/software are genuine or not.

Torres and Hyman have discussed the suitability of non-genuine parts for
clinical use and provided guidelines for equipment users to select appropriate
substitutes which are capable to avoid adverse effects. In the case when genuine
parts/devices/software are demanded by some of regulatory requirements, then re-
qualification does not need to be conducted on the non-genuine assemblies.
Instead, the asset has to be recycled for non-regulatory purposes.

When machinery/equipment qualification is conducted by a standard

endorsed third party such as by an ISO standard accredited company for a
particular division, the process is called certification. Currently, the coverage
of ISO/IEC 15408 certification by an ISO/IEC 27001 accredited organization is
limited; the scheme requires a fair amount of efforts to get popularized.
System testing

System testing of software or hardware is testing conducted on a complete,

integrated system to evaluate the system's compliance with its
specified requirements. System testing falls within the scope of black box testing,
and as such, should require no knowledge of the inner design of the code or logic.

As a rule, system testing takes, as its input, all of the "integrated" software
components that have passed integration testing and also the software system itself
integrated with any applicable hardware system(s). The purpose of integration
testing is to detect any inconsistencies between the software units that are
integrated together (called assemblages) or between any of the assemblages and
the hardware. System testing is a more limited type of testing; it seeks to detect
defects both within the "inter-assemblages" and also within the system as a whole.

System testing is performed on the entire system in the context of

a Functional Requirement Specification(s) (FRS) and/or a System
Requirement Specification (SRS). System testing tests not only the design, but also
the behavior and even the believed expectations of the customer. It is also intended
to test up to and beyond the bounds defined in the software/hardware requirements
specification

Types of tests to include in system testing

The following examples are different types of testing that should be considered
during System testing:

● Graphical user interface testing

● Usability testing
● Software performance testing
● Compatibility testing
● Exception handling
● Load testing
● Volume testing
● Stress testing
● Security testing
● Scalability testing
● Sanity testing
● Smoke testing
● Exploratory testing
● Ad hoc testing
● Regression testing
● Installation testing
● Maintenance testing Recovery testing and failover testing.
● Accessibility testing, including compliance with:
● Americans with Disabilities Act of 1990
● Section 508 Amendment to the Rehabilitation Act of 1973
● Web Accessibility Initiative (WAI) of the World Wide Web
Consortium (W3C)

Although different testing organizations may prescribe different tests as part of

System testing, this list serves as a general framework or foundation to begin with.

Structure Testing:

It is concerned with exercising the internal logic of a program and traversing

particular execution paths.
Output Testing:
 ● Output of test cases compared with the expected results created during
design of test cases.
● Asking the user about the format required by them tests the output generated
or displayed by the system under consideration.
● Here, the output format is considered into two was, one is on screen and
another one is printed format.
● The output on the screen is found to be correct as the format was designed in
the system design phase according to user needs.
● The output comes out as the specified requirements as the user’s hard copy.

User acceptance Testing:

● Final Stage, before handling over to the customer which is usually carried
out by the customer where the test cases are executed with actual data.
● The system under consideration is tested for user acceptance and constantly
keeping touch with the prospective system user at the time of developing
and making changes whenever required.
● It involves planning and execution of various types of test in order to
demonstrate that the implemented software system satisfies the requirements
stated in the requirement document.
Two set of acceptance test to be run:

1. Those developed by quality assurance group.

2. Those developed by customer.

Feasibility Study
Objective:
Develop a College Event Management System to streamline the planning,
coordination, and execution of college events. The system will facilitate event
scheduling, registration, and management for students and faculty.
Scope:
 Users: Students, Faculty, Event Organizers, Admins
 Features: Event scheduling, registration, notifications, resource
management, feedback collection.
Technical Feasibility:
 Technology Stack: Web technologies such as React for frontend, Node.js or
Python for backend, and relational databases like PostgreSQL or NoSQL
databases like MongoDB.
 Integration: Ability to integrate with email systems, calendars, and social
media for notifications and updates.
Financial Feasibility:
 Development Costs: Budget for software development, user interface
design, and initial deployment.
 Maintenance Costs: Ongoing costs for server hosting, software updates,
and technical support.
 Licensing Fees: Potential costs for third-party tools or libraries used in the
system.
Operational Feasibility:
 Implementation: Ease of integration with existing college systems and
infrastructure.
 Support: Adequate technical support and user assistance.
 Training: Training for users and administrators to effectively use the
system.
Legal Feasibility:
 Data Protection: Ensure compliance with data protection regulations like
GDPR or CCPA for handling user data.
 Accessibility: Adhere to accessibility standards to make the system usable
by individuals with disabilities.

Feasibility Analysis
1. Technical Feasibility:
 Technology Stack: Use React for frontend development, Node.js/Python for
backend, and PostgreSQL/MongoDB for the database.
 Integration: Support for integration with email and calendar services.
 Security: Implement user authentication and data encryption to secure
information.
2. Financial Feasibility:
 Initial Costs: Expenses related to development, design, and deployment.
 Ongoing Costs: Costs for hosting, maintenance, and support.
 Budget Planning: Evaluate funding requirements and financial
sustainability.
3. Operational Feasibility:
 Deployment: Assess the ease of deploying the system within the college's
IT infrastructure.
 Support and Maintenance: Ensure ongoing support and regular
maintenance for the system.
 User Training: Develop training materials and provide sessions for users
and admins.
4. Legal Feasibility:
  Compliance: Adhere to relevant data protection laws and accessibility
standards.
 Privacy: Ensure secure handling and storage of user information.

System Analysis
1. System Architecture:
 Frontend: React-based interface for managing events, registrations, and
user interactions.
 Backend: Node.js or Python server to handle business logic and data
management.
 Database: PostgreSQL or MongoDB for storing event details, user data, and
registration information.
2. Components:
 Event Management: Tools for creating, scheduling, and managing events.
 Registration System: Allow users to register for events and track their
participation.
 Resource Allocation: Manage and allocate resources such as venues,
equipment, and materials.
 Notifications: Automated notifications and reminders for event updates and
deadlines.
 Feedback Collection: Mechanisms for collecting and analyzing feedback
from event participants.
3. Data Flow:
 User Actions: Event creation, registration, and feedback submission.
 Backend Processing: Handling user requests, updating the database, and
sending notifications.
  Notifications: Inform users about event details, registration status, and
feedback collection.
4. User Roles:
 Students: Register for events, view event details, and provide feedback.
 Faculty: Organize events, manage resources, and monitor registrations.
 Event Organizers: Coordinate event logistics and manage event schedules.
 Admins: Oversee system operations, manage users, and handle support
issues.

System Requirements
A. Functional Requirements:
 Event Scheduling: Create and manage event schedules with details like
date, time, and location.
 Registration Management: Allow users to register for events and manage
their registrations.
 Resource Management: Allocate and manage resources needed for events.
 Notification System: Send automated notifications and reminders about
events and registrations.
 Feedback Collection: Collect and analyze feedback from event participants.
B. Non-Functional Requirements:
 Performance: Ensure fast response times and efficient handling of user
requests.
 Scalability: Support a growing number of events and users.
 Security: Implement strong security measures for user data and system
access.
 Usability: Provide an intuitive and user-friendly interface for all user roles.
 Reliability: High uptime and consistent availability of the system.
  Compliance: Adhere to data protection regulations and accessibility
standards.

CONCLUSION
The overall speedup is considerably higher than the manual work. The
management system enhances the functionalities of the routine works of the
management in a number of ways. The computerization helps the users a lot to
minimize the working time with ease. The management staffs get information in
desired manner. Data retrieval is also easy and fast. This also restricts the users to
enter invalid data and reduces the burden on the management. The data
maintaining has been made quite simple such as searching of records and records
maintenance. The error rate reduced dramatically with the use of management
management system.

FUTURE SCOPE
This portal is used by the admin so there is no data leakage and it can handled
securely. Delivering such software to the management it helps to take place task
with ease and that’s why it reduces time, money on manpower and efforts. we have
event module through which students to get the notices of upcoming events. And
students can provide feedback about happened events in the management. Students
can select GS, LR, CR in the voting module. It is a open source application so that
others can edit and transform this system application according to their needs can
be an future enhancement in project.
REFERENCES
[1] Treloar, A. (2005). Developing an Information Management Strategy for
Monash University'. Proceedings of Educause AustralAsia 2005.

[2] Achchuthan, S., & Nimalathasan, B. (2012). Level of entrepreneurial intention

of the management undergraduates in the university of jaffna, Sri Lanka: Scholars
and undergraduates perspective. ACADEMICIA: An International
Multidisciplinary Research Journal, 2(10), 24-42.

[3] Haag, S., Cummings, M., & Dawkins, J. (1998). Management information
systems. Multimedia systems, 279, 280-297.

[4] Lucey, T. (2005). Management information systems. Cengage Learning

EMEA.

[5] Laudon, K. C., & Laudon, J. P. (2011). Essentials of management information

systems. Upper Saddle River: Pearson.

[6] McLeod Jr, R., & Schell, G. (2001). Management Information Systems
8/E.Chapter-17" Marketing Information System" published in.

[7] Reddy, G. S., Srinivasu, R., Rikkula, S. R., & Rao, V. S. (2009). Management
information system to help managers for providing decision making in an
organization. International Journal of Reviews in Computing, 1-6.

[8] Sivarajah, K., & Achchuthan, S. (2013). Entrepreneurial Intention among

Undergraduates: Review of Literature. European Journal of Business and
Management, 5(5), 172-186.

CODE-

<!DOCTYPE html>

<html lang="en">
<head>

<meta charset="utf-8">

<meta http-equiv="X-UA-Compatible" content="IE=edge">

<meta name="viewport" content="width=device-width, initial-scale=1">

<title>Event Management</title>

<link href="https://fonts.googleapis.com/css?family=Poppins:400,700,900"
rel="stylesheet">

<link type="text/css" rel="stylesheet" href="css/bootstrap.min.css" />

<link type="text/css" rel="stylesheet" href="css/owl.carousel.css" />

<link type="text/css" rel="stylesheet" href="css/owl.theme.default.css" />

<link rel="stylesheet" href="css/font-awesome.min.css">

<link type="text/css" rel="stylesheet" href="css/style.css" />

<!--[if lt IE 9]>
 <script
src="https://oss.maxcdn.com/html5shiv/3.7.3/html5shiv.min.js"></script>

<script
src="https://oss.maxcdn.com/respond/1.4.2/respond.min.js"></script>

<![endif]-->

</head>

<body>

<header id="header" class="transparent-navbar">

<div class="container">

<div class="navbar-header">

<div class="navbar-brand">

<a class="logo" href="index.jsp">

<img class="logo-img" src="./img/logo.png" alt="logo">

<img class="logo-alt-img" src="./img/logo-alt.png" alt="logo">

</a>

</div>
<button class="navbar-toggle">

<i class="fa fa-bars"></i>

</button>

</div>

<nav id="nav">

<ul class="main-nav nav navbar-nav navbar-right">

<li><a href="#home">Home</a></li>

<li><a href="#about">About</a></li>

<li><a href="#schedule">Schedule</a></li>

<li><a href="#contact">Contact</a></li>

<li><a href="admin.jsp">Admin</a></li>

<li><a href="Comlog.jsp">Common Login</a></li>

<li><a href="Cooreg.jsp">Co-ordinator Register</a></li>

<li><a href="eventPage.jsp">Event</a></li>

<li><a href="StdDow.jsp">Student Download</a></li>

</ul>

</nav>
</div>

</header>

<div id="home">

<div class="section-bg" style="background-image:url(./img/background01.jpg)"

data-stellar-background-ratio="0.5"></div>

<div class="home-wrapper">

<div class="container">

<div class="row">

<div class="col-md-8 col-md-offset-2">

<div class="home-content">

<h1>Online Event Management</h1>

<h4 class="lead">Online College event management</h4>

<!--<a href="#" class="main-btn">Buy Ticket</a>-->

</div>

</div>

</div>

</div>

</div>

</div>

<div id="about" class="section">

<div class="container">

<div class="row">

<div class="section-title">

<h3 class="title"><span>About</span> <span style="color:

#dd0a37;">Event</span></h3>

</div>
<div class="col-md-8 col-md-offset-2 text-center">

<div class="about-content">

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam,
quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo
consequat. Duis aute irure

dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla

pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui
officia deserunt mollit anim id est laborum.</p>

</div>

<!--<div id="numbers">

<div class="row">

<div class="col-md-3 col-sm-3 col-xs-6">

<div class="number">

<h3><span class="counter" data-from="0" data-to="900" data-

speed="1500">0</span>+</h3>

<p>Hours</p>

</div>
</div>

<div class="col-md-3 col-sm-3 col-xs-6">

<div class="number">

<h3><span class="counter" data-from="0" data-to="750" data-

speed="1500">0</span>+</h3>

<p>Venues</p>

</div>

</div>

<div class="col-md-3 col-sm-3 col-xs-6">

<div class="number">

<h3><span class="counter" data-from="0" data-to="50" data-

speed="1500">0</span>+</h3>

<p>Country</p>

</div>

</div>

<div class="col-md-3 col-sm-3 col-xs-6">

<div class="number">

<h3><span class="counter" data-from="0" data-to="20" data-

speed="1500">0</span>+</h3>

<p>Speakers</p>

</div>

</div>

</div>

</div>-->

</div>

</div>

</div>

</div>

<div id="galery">

<div class="container">
<div class="row">

<div id="galery-owl" class="owl-carousel owl-theme">

<div class="galery-item">

<img src="./img/galery01.jpg" alt="">

</div>

<div class="galery-item">

<img src="./img/galery02.jpg" alt="">

</div>

<div class="galery-item">

<img src="./img/galery03.jpg" alt="">

</div>

</div>

</div>
</div>

</div>

<div id="schedule" class="section">

<div class="container">

<div class="row">

<div class="section-title">

<h3 class="title"><span>Event</span> <span style="color:

#dd0a37;">Schedule</span></h3>

</div>

<div class="col-md-8 col-md-offset-2">

<div class="events-wrapper">
<div class="event">

<div class="event-day">

<div>

<span class="day">15</span>

<span class="year">Feb, 2018</span>

</div>

</div>

<div class="event-content">

<p class="event-time"><i class="fa fa-clock-o"></i> 8 : 00 AM - 11 : 00 AM</p>

<h3 class="event-title">His id altera fabellas facilisis. Has eros assueverit

cu</h3>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua.</p>

<p>By <a href="#">John Doe</a></p>

</div>

</div>

<div class="event">

<div class="event-hour"></div>

<div class="event-content">
<p class="event-time"><i class="fa fa-clock-o"></i> 8 : 00 AM - 11 : 00 AM</p>

<h3 class="event-title">Perpetua consectetuer definitiones id sea, mei utinam

eripuit ne</h3>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua.</p>

<p>By <a href="#">John Doe</a></p>

</div>

</div>

<div class="event">

<div class="event-hour"></div>

<div class="event-content">

<p class="event-time"><i class="fa fa-clock-o"></i> 8 : 00 AM - 11 : 00 AM</p>

<h3 class="event-title">At mucius deserunt delicatissimi eam, labitur detraxit ut

sit</h3>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua.</p>

<p>By <a href="#">John Doe</a></p>

</div>

</div>
<div class="event">

<div class="event-day">

<div>

<span class="day">16</span>

<span class="year">Feb, 2018</span>

</div>

</div>

<div class="event-content">

<p class="event-time"><i class="fa fa-clock-o"></i> 8 : 00 AM - 11 : 00 AM</p>

<h3 class="event-title">His id altera fabellas facilisis. Has eros assueverit

cu</h3>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua.</p>

<p>By <a href="#">John Doe</a></p>

</div>

</div>

<div class="event">

<div class="event-hour"></div>

<div class="event-content">

<p class="event-time"><i class="fa fa-clock-o"></i> 8 : 00 AM - 11 : 00 AM</p>

<h3 class="event-title">At mucius deserunt delicatissimi eam, labitur detraxit ut
sit</h3>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua.</p>

<p>By <a href="#">John Doe</a></p>

</div>

</div>

<div class="event">

<div class="event-day">

<div>

<span class="day">17</span>

<span class="year">Feb, 2018</span>

</div>

</div>

<div class="event-content">

<p class="event-time"><i class="fa fa-clock-o"></i> 8 : 00 AM - 11 : 00 AM</p>

<h3 class="event-title">His id altera fabellas facilisis. Has eros assueverit

cu</h3>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua.</p>

<p>By <a href="#">John Doe</a></p>

</div>

</div>

<div class="event">

<div class="event-hour"></div>

<div class="event-content">

<p class="event-time"><i class="fa fa-clock-o"></i> 8 : 00 AM - 11 : 00 AM</p>

<h3 class="event-title">At mucius deserunt delicatissimi eam, labitur detraxit ut

sit</h3>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua.</p>

<p>By <a href="#">John Doe</a></p>

</div>

</div>

</div>

<div class="download-btn">

<a href="#" class="main-btn">Event Schedule</a>

</div>

</div>

</div>
</div>

</div>

<div id="speakers" class="section">

<div class="container">

<div class="row">

<div class="section-title">

<h3 class="title"><span>Our</span> <span style="color:

#dd0a37;">Speakers</span></h3>

</div>

<div class="col-md-4 col-sm-6">

<div class="speaker" data-toggle="modal" data-target="#speaker-modal-1">

<div class="speaker-img">

<img src="./img/speaker01.jpg" alt="">

</div>

<div class="speaker-body">

<div class="speaker-social">

<a href="#"><i class="fa fa-facebook"></i></a>

<a href="#"><i class="fa fa-twitter"></i></a>

<a href="#"><i class="fa fa-instagram"></i></a>

<a href="#"><i class="fa fa fa-linkedin"></i></a>

</div>

<div class="speaker-content">

<h2>John Doe</h2>

<span>Manager, CEO</span>

</div>

</div>

</div>

</div>

<div class="col-md-4 col-sm-6">

<div class="speaker" data-toggle="modal" data-target="#speaker-modal-1">

<div class="speaker-img">

<img src="./img/speaker02.jpg" alt="">

</div>
<div class="speaker-body">

<div class="speaker-social">

<a href="#"><i class="fa fa-facebook"></i></a>

<a href="#"><i class="fa fa-twitter"></i></a>

<a href="#"><i class="fa fa-instagram"></i></a>

<a href="#"><i class="fa fa fa-linkedin"></i></a>

</div>

<div class="speaker-content">

<h2>John Doe</h2>

<span>Manager, CEO</span>

</div>

</div>

</div>

</div>

<div class="col-md-4 col-sm-6">

<div class="speaker" data-toggle="modal" data-target="#speaker-modal-1">

<div class="speaker-img">

<img src="./img/speaker03.jpg" alt="">

</div>

<div class="speaker-body">
<div class="speaker-social">

<a href="#"><i class="fa fa-facebook"></i></a>

<a href="#"><i class="fa fa-twitter"></i></a>

<a href="#"><i class="fa fa-instagram"></i></a>

<a href="#"><i class="fa fa fa-linkedin"></i></a>

</div>

<div class="speaker-content">

<h2>John Doe</h2>

<span>Manager, CEO</span>

</div>

</div>

</div>

</div>

<div id="speaker-modal-1" class="speaker-modal modal fade">

<div class="modal-dialog">

<div class="modal-content">

<button type="button" class="speaker-modal-close"

data-dismiss="modal"></button>

<div class="modal-body">

<div class="row">
<div class="col-md-5">

<div class="speaker-modal-img">

<img src="./img/speaker-info.jpg" alt="">

</div>

</div>

<div class="col-md-7">

<div class="speaker-modal-content">

<h2 class="speaker-name">John Doe</h2>

<span class="speaker-job">- Manager, CEO</span>

<p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod
tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam,
quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo
consequat. Duis aute

irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla
pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui
officia deserunt mollit anim id est laborum.</p>

<div class="speaker-website">

<h4>Website</h4>

<a href="#">www.johndoe.com</a>

</div>

<div class="speaker-social">

<h4>Social Profile</h4>

<a href="#"><i class="fa fa-facebook"></i></a>

<a href="#"><i class="fa fa-twitter"></i></a>

<a href="#"><i class="fa fa-instagram"></i></a>

<a href="#"><i class="fa fa fa-linkedin"></i></a>

</div>

<div class="speaker-events">

<h4>Sessions</h4>

<div class="speaker-event">

<span><strong>Day 1 -</strong> February 20, 2018 8 : 00 AM - 11 : 00

AM</span>

<p>His id altera fabellas facilisis. Has eros assueverit cu</p>

</div>

<div class="speaker-event">

<span><strong>Day 2 -</strong> February 20, 2018 8 : 00 AM - 11 : 00

AM</span>

<p>At mucius deserunt delicatissimi eam, labitur detraxit ut sit</p>

</div>

</div>

</div>

</div>

</div>

</div>

</div>
</div>

</div>

</div>

</div>

</div>

<div id="sponsors" class="section">

<div class="container">

<div class="row">

<div class="section-title">

<h3 class="title"><span>Our</span> <span style="color:

#dd0a37;">Sponsors</span></h3>

</div>
<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

<div class="col-md-3 col-sm-4 col-xs-6">

<a href="#" class="sponsor">

<img src="./img/sponsor.png" alt="">

</a>

</div>

</div>

</div>

</div>

<div id="contact" class="section">

<div class="container">
<div class="row">

<div class="section-title">

<h3 class="title"><span>Contact</span> <span style="color:

#dd0a37;">Info</span></h3>

</div>

<div class="col-sm-4">

<div class="contact">

<h3>Address</h3>

<p>Pantech Solution<br>

T-nagar, chennai</p>

</div>

</div>

<div class="col-sm-4">

<div class="contact">

<h3>Phone</h3>

<p>9600066689</p>
</div>

</div>

<div class="col-sm-4">

<div class="contact">

<h3>Email</h3>

<a href="#"><span class="__cf_email__" data-

cfemail="c1a4b7a4afb581b2b4b1b1aeb3b5efa2aeac">chennai.java@pantechm
ail.com</span></a>

</div>

</div>

</div>

</div>

<div id="map"></div>

</div>
<footer id="footer">

<div class="container">

<div class="row">

<div class="col-md-4 col-md-push-4">

<div class="footer-brand">

<a class="logo" href="index.html">

<img class="logo-img" src="./img/logo.png" alt="logo">

</a>

</div>

</div>

<div class="col-md-4 col-md-push-4">

<div class="contact-social">

<a href="#"><i class="fa fa-facebook"></i></a>

<a href="#"><i class="fa fa-twitter"></i></a>

<a href="#"><i class="fa fa-google-plus"></i></a>

<a href="#"><i class="fa fa-instagram"></i></a>

<a href="#"><i class="fa fa-pinterest"></i></a>

<a href="#"><i class="fa fa fa-linkedin"></i></a>

</div>

</div>

</div>

</div>

</footer>

<script src="js/jquery.min.js"></script>

<script src="js/bootstrap.min.js"></script>

<script src="js/jquery.waypoints.min.js"></script>

<script src="js/owl.carousel.min.js"></script>

<script src="js/jquery.stellar.min.js"></script>

<!--<script src="https://maps.googleapis.com/maps/api/js?
v=3.exp&sensor=false"></script>-->
<!--<script src="js/google-map.js"></script>-->

<script src="js/jquery.countTo.js"></script>

<script src="js/main.js"></script>

<!--<script async src="https://www.googletagmanager.com/gtag/js?id=UA-

23581568-13"></script>-->

<script>

window.dataLayer = window.dataLayer || [];

function gtag(){dataLayer.push(arguments);}

gtag('js', new Date());

gtag('config', 'UA-23581568-13');

</script>

</body>

</html>

Admin-

<%--

Document : admin

Created on : 10 Jan, 2019, 10:07:29 AM

Author : Prabu

--%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>

<!DOCTYPE html>

<html>

<head>

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">

<meta charset="utf-8">

<meta http-equiv="X-UA-Compatible" content="IE=edge">

<meta name="viewport" content="width=device-width, initial-scale=1">

<title>Event Management</title>

<link href="https://fonts.googleapis.com/css?family=Poppins:400,700,900"
rel="stylesheet">

<link type="text/css" rel="stylesheet" href="css/bootstrap.min.css" />

<link type="text/css" rel="stylesheet" href="css/owl.carousel.css" />

<link type="text/css" rel="stylesheet" href="css/owl.theme.default.css" />

<link rel="stylesheet" href="css/font-awesome.min.css">

<link type="text/css" rel="stylesheet" href="css/style.css" />

 <title>ADMIN</title>

</head>

<body>

<form action="AdminLog" method="post">

<center>

<br><br><br>

<br><br><br>

<h1> <a style="color: #dd0a37" >ADMIN LOGIN</a></h1>

<br><br><br>

<input type="text" name="in1" value="" style="text-align: center;height:

50px;width: 300px" placeholder="Username"/>

<br><br><br>

<input type="password" name="in2" value="" style="text-align:

center;height: 50px;width: 300px" placeholder="Password"/>

<br><br><br>

<input class="main-btn" type="submit" value="Login" />

</center>

<div class="section-bg"
style="background-image:url(./img/background03.jpg)" data-stellar-
background-ratio="0.5"></div>
 </form>

</html>

<%--

Document : admin

Created on : 10 Jan, 2019, 10:07:29 AM

Author : Prabu

--%>

<%@page contentType="text/html" pageEncoding="UTF-8"%>

<!DOCTYPE html>

<html>

<head>

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">

<meta charset="utf-8">

<meta http-equiv="X-UA-Compatible" content="IE=edge">

<meta name="viewport" content="width=device-width, initial-scale=1">

<title>Event Management</title>
<link href="https://fonts.googleapis.com/css?family=Poppins:400,700,900"
rel="stylesheet">

<link type="text/css" rel="stylesheet" href="css/bootstrap.min.css" />

<link type="text/css" rel="stylesheet" href="css/owl.carousel.css" />

<link type="text/css" rel="stylesheet" href="css/owl.theme.default.css" />

<link rel="stylesheet" href="css/font-awesome.min.css">

<link type="text/css" rel="stylesheet" href="css/style.css" />

<title>ADMIN</title>

</head>

<body>

<form action="index.jsp" method="post">

<center>

<br><br>

<br><br>

<a href="DeptSel.jsp" class="main-btn" style="height: 70px;width:

300px">Department Select</a>

<br><br>
 <a href="evntlist.jsp" class="main-btn" style="height: 70px;width:
300px">Participants Result Declaration</a>

<br><br>

<a href="viewstdap.jsp" class="main-btn" style="height: 70px;width:

300px">Participants Certificate Provide</a>

<br><br>

<input class="main-btn" style="background-color: #fff; color:

crimson;"type="submit" value="Back" />

</center>

<div class="section-bg"
style="background-image:url(./img/background03.jpg)" data-stellar-
background-ratio="0.5"></div>

</form>

</html>

Backend code-

/*

* To change this license header, choose License Headers in Project Properties.

* To change this template file, choose Tools | Templates

* and open the template in the editor.

*/

import java.io.IOException;

import java.io.PrintWriter;

import java.sql.*;

import java.sql.PreparedStatement;

import javax.servlet.ServletException;

import javax.servlet.http.HttpServlet;

import javax.servlet.http.HttpServletRequest;

import javax.servlet.http.HttpServletResponse;

/**

* @author Prabu

*/

public class AdminLog extends HttpServlet {

/**

* Processes requests for both HTTP <code>GET</code> and

<code>POST</code>
 * methods.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

protected void processRequest(HttpServletRequest request,

HttpServletResponse response)

throws ServletException, IOException {

response.setContentType("text/html;charset=UTF-8");

try (PrintWriter out = response.getWriter()) {

/* TODO output your page here. You may use following sample code. */

out.println("<!DOCTYPE html>");

out.println("<html>");

out.println("<head>");

out.println("<title>Servlet AdminLog</title>");

out.println("</head>");

out.println("<body>");

out.println("<h1>Servlet AdminLog at " + request.getContextPath() +

"</h1>");

out.println("</body>");
 out.println("</html>");

// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on

the + sign on the left to edit the code.">

/**

* Handles the HTTP <code>GET</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doGet(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

processRequest(request, response);

/**
 * Handles the HTTP <code>POST</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doPost(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

String s1=request.getParameter("in1");

String s2=request.getParameter("in2");

Connection con=null;

Statement ps=null;

ResultSet rs=null;

try{

Class.forName("com.mysql.jdbc.Driver");
 con=DriverManager.getConnection("jdbc:mysql://localhost:3306/events"
,"root","password");

ps=con.createStatement();

rs=ps.executeQuery("select * from adlog where adname='"+s1+"' and

adpass='"+s2+"'");

if(rs.next())

response.sendRedirect("AdPg.jsp");

else{

response.sendRedirect("error.jsp");

}catch(ClassNotFoundException | SQLException e){

System.out.println(e);

/**

* Returns a short description of the servlet.

 *

* @return a String containing servlet description

*/

@Override

public String getServletInfo() {

return "Short description";

}// </editor-fold>

Comlog.java

/*

* To change this license header, choose License Headers in Project Properties.

* To change this template file, choose Tools | Templates

* and open the template in the editor.

*/

import java.io.IOException;

import java.io.PrintWriter;

import java.sql.Connection;

import java.sql.DriverManager;

//import java.sql.PreparedStatement;

import java.sql.ResultSet;
import java.sql.*;

import javax.servlet.ServletException;

import javax.servlet.http.HttpServlet;

import javax.servlet.http.HttpServletRequest;

import javax.servlet.http.HttpServletResponse;

/**

* @author Prabu

*/

public class ComLog extends HttpServlet {

/**

* Processes requests for both HTTP <code>GET</code> and

<code>POST</code>

* methods.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/
 protected void processRequest(HttpServletRequest request,
HttpServletResponse response)

throws ServletException, IOException {

response.setContentType("text/html;charset=UTF-8");

try (PrintWriter out = response.getWriter()) {

/* TODO output your page here. You may use following sample code. */

out.println("<!DOCTYPE html>");

out.println("<html>");

out.println("<head>");

out.println("<title>Servlet ComLog</title>");

out.println("</head>");

out.println("<body>");

out.println("<h1>Servlet ComLog at " + request.getContextPath() +

"</h1>");

out.println("</body>");

out.println("</html>");

// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on

the + sign on the left to edit the code.">

/**

* Handles the HTTP <code>GET</code> method.

 *

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doGet(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

processRequest(request, response);

/**

* Handles the HTTP <code>POST</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override
 protected void doPost(HttpServletRequest request, HttpServletResponse
response)

throws ServletException, IOException {

String s1=request.getParameter("in1");

String s2=request.getParameter("in2");

String s3=request.getParameter("b1");

System.out.println(s3+"???");

Connection con=null;

Statement ps=null;

ResultSet rs=null;

try{

if(s3.equals("evn")){

Class.forName("com.mysql.jdbc.Driver");

con=DriverManager.getConnection("jdbc:mysql://localhost:3306/events"
,"root","password");

ps=con.createStatement();

rs=ps.executeQuery("select * from evntco where evname='"+s1+"' and

evpass='"+s2+"'");
 if(rs.next())

response.sendRedirect("eventact.jsp");

else{

response.sendRedirect("error.jsp");

if(s3.equals("hod")){

Class.forName("com.mysql.jdbc.Driver");

con=DriverManager.getConnection("jdbc:mysql://localhost:3306/events"
,"root","password");

ps=con.createStatement();

rs=ps.executeQuery("select * from hodreg where hdname='"+s1+"' and

hdpass='"+s2+"'");

if(rs.next())

{
 response.sendRedirect("hodapr.jsp");

else{

response.sendRedirect("error.jsp");

if(s3.equals("prin")){

Class.forName("com.mysql.jdbc.Driver");

con=DriverManager.getConnection("jdbc:mysql://localhost:3306/events"
,"root","password");

ps=con.createStatement();

rs=ps.executeQuery("select * from prinlog where depname='"+s1+"' and

deppass='"+s2+"'");

if(rs.next())

response.sendRedirect("priapr.jsp");

}
 else{

response.sendRedirect("error.jsp");

}catch(ClassNotFoundException | SQLException e){

System.out.println(e);

/**

* Returns a short description of the servlet.

* @return a String containing servlet description

*/

@Override

public String getServletInfo() {

 return "Short description";

}// </editor-fold>

/*

* To change this license header, choose License Headers in Project Properties.

* To change this template file, choose Tools | Templates

* and open the template in the editor.

*/

import java.io.IOException;

import java.io.PrintWriter;

import java.sql.Connection;

import java.sql.DriverManager;

import java.sql.ResultSet;

import java.sql.SQLException;

import java.sql.Statement;

import javax.servlet.ServletException;

import javax.servlet.http.HttpServlet;

import javax.servlet.http.HttpServletRequest;

import javax.servlet.http.HttpServletResponse;

import javax.servlet.http.HttpSession;
 /**

* @author Prabu

*/

public class EventReg extends HttpServlet {

/**

* Processes requests for both HTTP <code>GET</code> and

<code>POST</code>

* methods.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

protected void processRequest(HttpServletRequest request,

HttpServletResponse response)

throws ServletException, IOException {

response.setContentType("text/html;charset=UTF-8");

try (PrintWriter out = response.getWriter()) {

 /* TODO output your page here. You may use following sample code. */

out.println("<!DOCTYPE html>");

out.println("<html>");

out.println("<head>");

out.println("<title>Servlet EventReg</title>");

out.println("</head>");

out.println("<body>");

out.println("<h1>Servlet EventReg at " + request.getContextPath() +

"</h1>");

out.println("</body>");

out.println("</html>");

// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on

the + sign on the left to edit the code.">

/**

* Handles the HTTP <code>GET</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

 * @throws IOException if an I/O error occurs

*/

@Override

protected void doGet(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

processRequest(request, response);

/**

* Handles the HTTP <code>POST</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doPost(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

HttpSession session1=request.getSession();
 Connection con=null;

Statement st=null;

ResultSet rs1=null;

try

String s1=request.getParameter("in1");

String s2=request.getParameter("in2");

String s3=request.getParameter("in3");

String s4=request.getParameter("in4");

String s5=request.getParameter("in5");

String s6=request.getParameter("in6");

String s7=request.getParameter("event");

Class.forName("com.mysql.jdbc.Driver");

con=DriverManager.getConnection("jdbc:mysql://localhost:3306/events",
"root","password");

st=con.createStatement();

int rs=st.executeUpdate("Insert into

evntco(evname,evpass,evphno,evmail,evaddr,evdept,evnm)
VALUES('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')");

if(rs>0)
 {

response.sendRedirect("index.jsp");

}catch(ClassNotFoundException | SQLException e){

System.out.println(e);

/**

* Returns a short description of the servlet.

* @return a String containing servlet description

*/

@Override

public String getServletInfo() {

return "Short description";

}// </editor-fold>

Eventreg.java
/*

* To change this license header, choose License Headers in Project Properties.

* To change this template file, choose Tools | Templates

* and open the template in the editor.

*/

import java.io.IOException;

import java.io.PrintWriter;

import java.sql.Connection;

import java.sql.DriverManager;

import java.sql.ResultSet;

import java.sql.SQLException;

import java.sql.Statement;

import javax.servlet.ServletException;

import javax.servlet.http.HttpServlet;

import javax.servlet.http.HttpServletRequest;

import javax.servlet.http.HttpServletResponse;

import javax.servlet.http.HttpSession;

/**

* @author Prabu
*/

public class EventReg extends HttpServlet {

/**

* Processes requests for both HTTP <code>GET</code> and

<code>POST</code>

* methods.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

protected void processRequest(HttpServletRequest request,

HttpServletResponse response)

throws ServletException, IOException {

response.setContentType("text/html;charset=UTF-8");

try (PrintWriter out = response.getWriter()) {

/* TODO output your page here. You may use following sample code. */

out.println("<!DOCTYPE html>");

out.println("<html>");

out.println("<head>");
 out.println("<title>Servlet EventReg</title>");

out.println("</head>");

out.println("<body>");

out.println("<h1>Servlet EventReg at " + request.getContextPath() +

"</h1>");

out.println("</body>");

out.println("</html>");

// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on

the + sign on the left to edit the code.">

/**

* Handles the HTTP <code>GET</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doGet(HttpServletRequest request, HttpServletResponse

response)
 throws ServletException, IOException {

processRequest(request, response);

/**

* Handles the HTTP <code>POST</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doPost(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

HttpSession session1=request.getSession();

Connection con=null;

Statement st=null;

ResultSet rs1=null;

try

{
 String s1=request.getParameter("in1");

String s2=request.getParameter("in2");

String s3=request.getParameter("in3");

String s4=request.getParameter("in4");

String s5=request.getParameter("in5");

String s6=request.getParameter("in6");

String s7=request.getParameter("event");

Class.forName("com.mysql.jdbc.Driver");

con=DriverManager.getConnection("jdbc:mysql://localhost:3306/events",
"root","password");

st=con.createStatement();

int rs=st.executeUpdate("Insert into

evntco(evname,evpass,evphno,evmail,evaddr,evdept,evnm)
VALUES('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')");

if(rs>0)

response.sendRedirect("index.jsp");

}catch(ClassNotFoundException | SQLException e){

 System.out.println(e);

/**

* Returns a short description of the servlet.

* @return a String containing servlet description

*/

@Override

public String getServletInfo() {

return "Short description";

}// </editor-fold>

HOdreg.java

/*

* To change this license header, choose License Headers in Project Properties.

* To change this template file, choose Tools | Templates

* and open the template in the editor.

*/
import java.io.IOException;

import java.io.PrintWriter;

import java.sql.Connection;

import java.sql.DriverManager;

import java.sql.ResultSet;

import java.sql.SQLException;

import java.sql.Statement;

import javax.servlet.ServletException;

import javax.servlet.http.HttpServlet;

import javax.servlet.http.HttpServletRequest;

import javax.servlet.http.HttpServletResponse;

import javax.servlet.http.HttpSession;

/**

* @author Prabu

*/

public class HodReg extends HttpServlet {

/**
 * Processes requests for both HTTP <code>GET</code> and
<code>POST</code>

* methods.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

protected void processRequest(HttpServletRequest request,

HttpServletResponse response)

throws ServletException, IOException {

response.setContentType("text/html;charset=UTF-8");

try (PrintWriter out = response.getWriter()) {

/* TODO output your page here. You may use following sample code. */

out.println("<!DOCTYPE html>");

out.println("<html>");

out.println("<head>");

out.println("<title>Servlet HodReg</title>");

out.println("</head>");

out.println("<body>");

out.println("<h1>Servlet HodReg at " + request.getContextPath() +

"</h1>");
 out.println("</body>");

out.println("</html>");

// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on

the + sign on the left to edit the code.">

/**

* Handles the HTTP <code>GET</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doGet(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

processRequest(request, response);

}
 /**

* Handles the HTTP <code>POST</code> method.

* @param request servlet request

* @param response servlet response

* @throws ServletException if a servlet-specific error occurs

* @throws IOException if an I/O error occurs

*/

@Override

protected void doPost(HttpServletRequest request, HttpServletResponse

response)

throws ServletException, IOException {

HttpSession session1=request.getSession();

Connection con=null;

Statement st=null;

ResultSet rs1=null;

try

String s1=request.getParameter("in1");

String s2=request.getParameter("in2");

String s3=request.getParameter("in3");

String s4=request.getParameter("in4");
 String s5=request.getParameter("in5");

String s6=request.getParameter("in6");

Class.forName("com.mysql.jdbc.Driver");

con=DriverManager.getConnection("jdbc:mysql://localhost:3306/events",
"root","password");

st=con.createStatement();

int rs=st.executeUpdate("Insert into

hodreg(hdname,hdpass,hdphno,hdmail,hdaddr,hddept)
VALUES('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"')");

if(rs>0)

response.sendRedirect("index.jsp");

}catch(ClassNotFoundException | SQLException e){

System.out.println(e);

}
 /**

* Returns a short description of the servlet.

* @return a String containing servlet description

*/

@Override

public String getServletInfo() {

return "Short description";

}// </editor-fold>

Final.db

/*

SQLyog Ultimate v9.20

MySQL - 5.0.22-community-nt : Database - events

*******************************************************************
**

*/

/*!40101 SET NAMES utf8 */;

/*!40101 SET SQL_MODE=''*/;

/*!40014 SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS,

UNIQUE_CHECKS=0 */;

/*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS,

FOREIGN_KEY_CHECKS=0 */;

/*!40101 SET @OLD_SQL_MODE=@@SQL_MODE,

SQL_MODE='NO_AUTO_VALUE_ON_ZERO' */;

/*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0 */;

CREATE DATABASE /*!32312 IF NOT EXISTS*/`events` /*!40100 DEFAULT

CHARACTER SET latin1 */;

USE `events`;

/*Table structure for table `adlog` */

DROP TABLE IF EXISTS `adlog`;

CREATE TABLE `adlog` (

`adname` varchar(100) default NULL,

`adpass` varchar(100) default NULL

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `adlog` */

insert into `adlog`(`adname`,`adpass`) values ('admin','admin');

/*Table structure for table `certificate` */

DROP TABLE IF EXISTS `certificate`;

CREATE TABLE `certificate` (

`sno` int(10) NOT NULL auto_increment,

`deptnm` varchar(100) default NULL,

`filename` varchar(500) default NULL,

PRIMARY KEY (`sno`)

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `certificate` */

insert into `certificate`(`sno`,`deptnm`,`filename`) values (1,'ECE','cer22.docx');

/*Table structure for table `certupd` */

DROP TABLE IF EXISTS `certupd`;

CREATE TABLE `certupd` (

`sno` int(10) NOT NULL auto_increment,

`deptnm` varchar(100) default NULL,

`filename` varchar(100) default NULL,

PRIMARY KEY (`sno`)

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `certupd` */

/*Table structure for table `evntco` */

DROP TABLE IF EXISTS `evntco`;

CREATE TABLE `evntco` (

`evname` varchar(100) default NULL,

`evpass` varchar(100) default NULL,

`evphno` decimal(10,0) default NULL,

`evmail` varchar(100) default NULL,

`evaddr` varchar(100) default NULL,

`evdept` varchar(100) default NULL,

 `evnm` varchar(100) default NULL

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `evntco` */

insert into
`evntco`(`evname`,`evpass`,`evphno`,`evmail`,`evaddr`,`evdept`,`evnm`) values
('anbu','asdf','9876543212','[email protected]','chennai','ECE','Symposium');

/*Table structure for table `hodreg` */

DROP TABLE IF EXISTS `hodreg`;

CREATE TABLE `hodreg` (

`hdname` varchar(100) default NULL,

`hdpass` varchar(100) default NULL

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `hodreg` */

insert into `hodreg`(`hdname`,`hdpass`) values ('hod1','asdf');

/*Table structure for table `intrapar` */

DROP TABLE IF EXISTS `intrapar`;

CREATE TABLE `intrapar` (

`sno` int(11) NOT NULL auto_increment,

`stdnm` varchar(100) NOT NULL,

`stdreg` varchar(100) default NULL,

`stddept` varchar(100) default NULL,

`stdem` varchar(100) default NULL,

`stdyr` varchar(100) default NULL,

`stdclg` varchar(100) default NULL,

`inraer` varchar(100) default NULL,

`stdso` varchar(100) default NULL,

`stdevnt` varchar(100) default NULL,

`status` varchar(100) default 'absent',

PRIMARY KEY (`sno`,`stdnm`),

UNIQUE KEY `sno` (`sno`)

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `intrapar` */

insert into
`intrapar`(`sno`,`stdnm`,`stdreg`,`stddept`,`stdem`,`stdyr`,`stdclg`,`inraer`,`stdso
`,`stdevnt`,`status`) values
(1,'anbuu','std001','ECE','[email protected]','3','Akt','intra','Symp
osium','PPT','Present'),
(2,'priya','std002','CSE','[email protected]','4','XYZ','intra','Sympos
ium','PPT','absent'),
(3,'james','std003','EEE','[email protected]','2','ABC','intra','Symp
osium','PPT','Present'),
(4,'rajesh','clg001','CSE','[email protected]','4','XYZ','inter','Confer
ence','IEEE Collogium on 3D image','Present'),
(5,'dinesh','clg002','ECE','[email protected]','2','ABC','inter','Work
shop','IOT','Present'),
(6,'anbuu','std001','ECE','[email protected]','3','Akt','intra','Symp
osium','Mock Interview','Present'),
(7,'deepak','213','mech','[email protected]','4','gtr','inter','Conference','IEE
E Collogium on 3D image','absent'),
(8,'user12','std6001','CSE','[email protected]','4','ASDF','inter','Worksho
p','IOT','absent'),
(9,'james','std003','EEE','[email protected]','2','ABC','intra','Confe
rence','5G for ubiquitous computing','absent'),
(10,'rajesh','c3RkNjAwMQ==','CSE','YXJhc2kuYjIyQGdtYWlsLmNvbQ==','4','XYZ','
inter','Conference','5G for ubiquitous computing','absent');

/*Table structure for table `intrastd` */

DROP TABLE IF EXISTS `intrastd`;

CREATE TABLE `intrastd` (

 `sno` int(10) NOT NULL auto_increment,

`stdnm` varchar(100) NOT NULL,

`stdrg` varchar(100) default NULL,

`stddept` varchar(100) default NULL,

`stdem` varchar(100) default NULL,

`stdyr` varchar(100) default NULL,

`stdclg` varchar(100) default NULL,

PRIMARY KEY (`sno`,`stdnm`)

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `intrastd` */

insert into `intrastd`(`sno`,`stdnm`,`stdrg`,`stddept`,`stdem`,`stdyr`,`stdclg`)

values (1,'anbuu','std001','ECE','[email protected]','3','Akt'),
(2,'priya','std002','CSE','[email protected]','4','XYZ'),
(3,'james','std003','EEE','[email protected]','2','ABC'),
(4,'prabu','std004','IT','[email protected]','4','ABC');

/*Table structure for table `prinlog` */

DROP TABLE IF EXISTS `prinlog`;

CREATE TABLE `prinlog` (

 `depname` varchar(100) default NULL,

`deppass` varchar(100) default NULL

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `prinlog` */

insert into `prinlog`(`depname`,`deppass`) values ('principal','1234');

/*Table structure for table `windecl` */

DROP TABLE IF EXISTS `windecl`;

CREATE TABLE `windecl` (

`sno` int(10) NOT NULL auto_increment,

`stdnm` varchar(100) default NULL,

`stdem` varchar(100) default NULL,

`winrun` varchar(100) default NULL,

`evnt` varchar(100) default NULL,

`typen` varchar(100) default NULL,

`hstatus` varchar(100) default 'pending',

`pstatus` varchar(100) default 'pending',

`filename` varchar(500) default NULL,

 `time1` varchar(100) default NULL,

`otp1` varchar(100) default NULL,

PRIMARY KEY (`sno`)

) ENGINE=InnoDB DEFAULT CHARSET=latin1;

/*Data for the table `windecl` */

insert into
`windecl`(`sno`,`stdnm`,`stdem`,`winrun`,`evnt`,`typen`,`hstatus`,`pstatus`,`filen
ame`,`time1`,`otp1`) values
(1,'std001','[email protected]','Winner','Symposium','PPT','Appro
ved','Approved','eventdb.sql','23:23','forvuh'),
(2,'std002',NULL,'Runner','Symposium','PPT','Approved','Approved','cer22.docx'
,NULL,NULL),
(3,'std003','','Winner','Symposium','PPT','Approved','Approved','evedb.sql',NUL
L,NULL),
(4,'std001','[email protected]','Runner','Symposium','PPT','Appro
ved','Approved','eventdb.sql','23:23','forvuh'),
(5,'std001','[email protected]','Winner','Symposium','Mock
Interview','Approved','Approved','eventdb.sql','23:23','forvuh'),
(6,'',NULL,'Runner','Symposium','Mock
Interview','pending','pending',NULL,NULL,NULL);

/*!40101 SET SQL_MODE=@OLD_SQL_MODE */;

/*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */;

/*!40014 SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS */;

/*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */;