Scribd
Upload
17 views10 pages

T (Table 14)

The document provides detailed specifications for various T-section steel profiles, including dimensions, sectional areas, and mechanical properties such as bending, shear, and torsion characteristics. Each T-section is listed with its respective measurements in millimeters and calculated values in centimeters for various engineering parameters. This data is essential for structural engineering applications where T-sections are utilized.

Uploaded by

adhamsabry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views10 pages

T (Table 14)

The document provides detailed specifications for various T-section steel profiles, including dimensions, sectional areas, and mechanical properties such as bending, shear, and torsion characteristics. Each T-section is listed with its respective measurements in millimeters and calculated values in centimeters for various engineering parameters. This data is essential for structural engineering applications where T-sections are utilized.

Uploaded by

adhamsabry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

T (Table 14)

 ADM 2020
 --

T (Table 14)
b

ez
Tees
r1

tf
tw y

d
z

Sectional
Geometry Bending
Area

h b tw tf r1 r3 d A ez Iy Iz Ip
Section
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [cm2] [mm] [cm4] [cm4] [cm4]

T 1.25 x 1.50 x 0.384 31.8 38.1 3.2 3.2 3.2 1.6 25.4 2.10 8.3 1.87 1.33 3.20

T 1.63 x 1.75 x 0.476 41.4 44.4 3.2 3.2 3.2 1.6 35.1 2.61 11.1 4.16 2.16 6.33

T 1.00 x 2.00 x 0.421 25.4 50.8 3.2 3.2 3.2 1.6 19.0 2.31 5.4 1.04 3.25 4.29

T 1.75 x 2.00 x 0.531 44.4 50.8 3.2 3.2 3.2 1.6 38.1 2.91 11.5 5.33 3.25 8.57

T 1.25 x 2.50 x 0.652 31.8 63.5 4.0 4.0 3.2 1.6 24.6 3.57 6.8 2.58 7.83 10.41

T 2.00 x 2.50 x 0.789 50.8 63.5 4.0 4.0 3.2 1.6 43.7 4.33 12.7 10.03 7.87 17.90

T 2.00 x 3.00 x 0.881 50.8 76.2 4.0 4.0 3.2 1.6 43.7 4.83 11.6 10.57 13.74 24.31

T 2.50 x 3.00 x 1.17 63.5 76.2 4.8 4.8 4.8 2.4 53.9 6.42 16.1 23.52 16.36 39.87

T 3.00 x 4.00 x 1.50 76.2 101.6 4.8 4.8 4.8 2.4 66.6 8.26 18.0 42.87 39.42 82.29
1/10
T 4.00 x 4.00 x 2.27 101.6 101.6 6.3 6.3 6.3 3.2 88.9 12.45 27.5 124.04 51.61 175.65

T 5.00 x 4.00 x 2.57 127.0 101.6 6.3 6.3 6.3 3.2 114.3 14.06 37.4 230.59 51.61 282.20

T 3.00 x 6.00 x 3.24 76.2 152.4 7.9 7.9 7.9 0.0 60.4 17.74 15.7 76.17 234.34 310.51

T 4.00 x 6.00 x 3.88 101.6 152.4 9.5 8.0 8.0 0.0 85.7 21.29 25.3 198.96 235.17 434.13

T 4.00 x 6.00 x 4.79 101.6 152.4 9.5 11.4 7.9 0.0 82.2 26.26 22.4 208.95 337.98 546.93

T 7.50 x 7.50 x 9.46 190.5 190.5 12.7 19.0 15.9 0.0 155.6 58.32 44.8 1777.31 1103.01 2880.32

T 7.50 x 7.50 x 14.4 190.5 190.5 28.7 19.0 15.9 0.0 155.6 85.81 63.8 3113.41 1127.99 4241.40

T 6.00 x 8.00 x 11.2 152.4 203.2 12.7 21.8 12.7 0.0 117.9 61.68 31.6 953.17 1531.73 2484.90

Bending Shear

Ip,SC iy iz ip ip,SC max Sy max Sz Wy,min Wy,max Wy Wz Ay


Section
[cm4] [mm] [mm] [mm] [mm] [cm3] [cm3] [cm3] [cm3] [cm3] [cm3] [cm2]

T 1.25 x 1.50 x 0.384 4.15 9.4 8.0 12.3 14.0 0.85 0.54 −0.89 0.80 0.80 0.70 1.00

T 1.63 x 1.75 x 0.476 8.66 12.6 9.1 15.5 18.2 1.43 0.74 −1.48 1.36 1.36 0.97 1.19

T 1.00 x 2.00 x 0.421 4.60 6.8 11.8 13.6 14.1 0.61 0.97 −0.76 0.52 0.52 1.28 1.35

T 1.75 x 2.00 x 0.531 11.37 13.5 10.5 17.1 19.8 1.69 0.97 −1.83 1.61 1.61 1.28 1.35

T 1.25 x 2.50 x 0.652 11.48 8.5 14.8 17.1 17.9 1.21 1.93 −1.50 1.03 1.03 2.47 1.96

T 2.00 x 2.50 x 0.789 23.21 15.2 13.5 20.3 23.2 2.84 1.93 −3.11 2.64 2.64 2.47 1.98
2/10
T 2.00 x 3.00 x 0.881 29.18 14.8 16.8 22.4 24.6 3.01 2.80 −3.60 2.69 2.69 3.61 2.40

T 2.50 x 3.00 x 1.17 51.82 19.1 16.0 24.9 28.4 5.26 3.29 −5.77 4.95 4.95 4.29 3.00

T 3.00 x 4.00 x 1.50 102.17 22.8 21.9 31.6 35.2 7.95 5.92 −9.39 7.34 7.34 7.77 4.00

T 4.00 x 4.00 x 2.27 249.40 31.5 20.3 37.5 44.8 17.04 7.78 −17.73 16.71 16.71 10.14 5.33

T 5.00 x 4.00 x 2.57 447.05 40.4 19.2 44.7 56.4 25.10 7.78 −24.27 25.73 25.73 10.16 5.33

T 3.00 x 6.00 x 3.24 334.42 20.6 36.3 41.7 43.4 14.52 23.04 −19.15 12.62 12.62 30.81 10.14

T 4.00 x 6.00 x 3.88 531.43 30.5 33.3 45.1 50.0 27.72 23.13 −30.94 26.06 26.06 30.81 10.18

T 4.00 x 6.00 x 4.79 619.81 28.2 35.8 45.6 48.6 29.83 33.19 −36.73 26.38 26.38 44.41 14.63

T 7.50 x 7.50 x 9.46 3623.36 55.1 43.4 70.2 78.8 134.40 86.48 −156.09 123.07 123.07 115.86 30.61

T 7.50 x 7.50 x 14.4 6817.79 60.2 36.3 70.3 89.1 229.83 87.24 −192.06 247.44 247.44 118.31 31.81

T 6.00 x 8.00 x 11.2 2747.41 39.4 49.8 63.5 66.7 92.71 112.60 −118.88 78.99 78.99 150.60 37.31

3/10
Shear Torsion Warping Stability Plasticity

Az zSC It Wt max ω Iω iω Wω max Sω ry rz,SC Wpl,y


Section
[cm2] [mm] [cm4] [cm3] [cm2] [cm6] [mm] [cm4] [cm4] [mm] [mm] [cm3]

T 1.25 x 1.50 x 0.384 0.73 −6.7 0.07 0.22 0.00 0.00 0.0 0.00 0.00 5.5 18.9 1.45

T 1.63 x 1.75 x 0.476 0.97 −9.4 0.09 0.27 0.00 0.00 0.0 0.00 0.00 7.8 26.6 2.50

T 1.00 x 2.00 x 0.421 0.50 −3.8 0.08 0.24 0.00 0.00 0.0 0.00 0.00 −1.3 6.3 0.98

T 1.75 x 2.00 x 0.531 1.05 −9.8 0.10 0.30 0.00 0.00 0.0 0.00 0.00 8.2 27.8 2.91

T 1.25 x 2.50 x 0.652 0.79 −4.8 0.19 0.47 0.00 0.00 0.0 0.00 0.00 −1.7 7.8 1.92

T 2.00 x 2.50 x 0.789 1.43 −10.6 0.23 0.57 0.00 0.00 0.0 0.00 0.00 8.5 29.7 4.78

T 2.00 x 3.00 x 0.881 1.38 −9.5 0.25 0.63 0.00 0.00 0.0 0.00 0.00 6.3 25.3 4.85

T 2.50 x 3.00 x 1.17 2.22 −13.6 0.48 1.01 0.00 0.00 0.0 0.00 0.00 11.3 38.5 8.94

T 3.00 x 4.00 x 1.50 2.64 −15.5 0.62 1.30 0.00 0.00 0.0 0.00 0.00 12.4 43.5 13.12

T 4.00 x 4.00 x 2.27 4.91 −24.2 1.66 2.61 0.00 0.00 0.0 0.00 0.00 19.6 68.1 30.44

T 5.00 x 4.00 x 2.57 6.39 −34.0 1.87 2.95 0.00 0.00 0.0 0.00 0.00 23.9 92.0 47.16

T 3.00 x 6.00 x 3.24 3.92 −11.6 3.60 4.55 0.00 0.00 0.0 0.00 0.00 −3.5 19.7 22.63

T 4.00 x 6.00 x 3.88 6.64 −21.2 5.19 5.45 0.00 0.00 0.0 0.00 0.00 9.2 51.6 46.49

T 4.00 x 6.00 x 4.79 6.83 −16.5 9.90 8.66 0.00 0.00 0.0 0.00 0.00 14.0 47.0 47.52

T 7.50 x 7.50 x 9.46 18.34 −35.1 53.22 27.94 0.00 0.00 0.0 0.00 0.00 49.2 119.4 219.25

T 7.50 x 7.50 x 14.4 39.40 −53.3 176.65 61.54 0.00 0.00 0.0 0.00 0.00 19.4 126.0 443.84

T 6.00 x 8.00 x 11.2 14.29 −20.4 75.21 34.43 0.00 0.00 0.0 0.00 0.00 33.7 74.5 147.87
4/10
T 6.00 x 8.00 x 11.2 14.29 −20.4 75.21 34.43 0.00 0.00 0.0 0.00 0.00 33.7 74.5 147.87

5/10
Plasticity Other

Wpl,z αpl,y αpl,z Apl,y Apl,z Npl Vpl,y Vpl,z Mpl,y Mpl,z zpl Nu
Section
[cm3] [--] [--] [cm2] [cm2] [kN] [kN] [kN] [kNm] [kNm] [mm] [kN]

T 1.25 x 1.50 x 0.384 1.15 1.810 1.636 1.21 0.96 49.492 16.413 12.993 0.34 0.27 −5.5 49.492

T 1.63 x 1.75 x 0.476 1.58 1.839 1.634 1.41 1.26 61.432 19.148 17.151 0.59 0.37 −8.0 61.432

T 1.00 x 2.00 x 0.421 2.01 1.868 1.569 1.61 0.76 54.230 21.883 10.258 0.23 0.47 −3.1 54.230

T 1.75 x 2.00 x 0.531 2.05 1.814 1.607 1.61 1.36 68.444 21.883 18.464 0.68 0.48 −8.5 68.444

T 1.25 x 2.50 x 0.652 3.98 1.863 1.608 2.52 1.18 84.748 34.138 16.004 0.45 0.93 −3.9 84.748

T 2.00 x 2.50 x 0.789 4.05 1.812 1.638 2.52 1.93 102.487 34.138 26.245 1.12 0.95 −9.2 102.487

T 2.00 x 3.00 x 0.881 5.78 1.806 1.604 3.02 1.93 114.312 40.966 26.245 1.14 1.36 −8.4 114.312

T 2.50 x 3.00 x 1.17 6.93 1.807 1.614 3.64 2.92 150.830 49.369 39.594 2.10 1.63 −11.8 150.830

T 3.00 x 4.00 x 1.50 12.27 1.787 1.580 4.85 3.52 193.585 65.825 47.822 3.08 2.88 −13.9 193.585

T 4.00 x 4.00 x 2.27 16.56 1.821 1.632 6.45 6.25 292.727 87.534 84.798 7.15 3.89 −21.2 292.727

T 5.00 x 4.00 x 2.57 16.81 1.833 1.655 6.45 7.86 330.630 87.534 106.682 11.08 3.95 −21.9 330.630

T 3.00 x 6.00 x 3.24 47.24 1.794 1.533 12.08 5.72 417.341 163.863 77.671 5.32 11.10 −9.8 417.341

T 4.00 x 6.00 x 3.88 48.47 1.784 1.573 12.12 9.30 500.764 164.388 126.163 10.93 11.39 −18.3 500.764

T 4.00 x 6.00 x 4.79 68.59 1.801 1.545 17.42 9.13 617.560 236.341 123.915 11.17 16.12 −13.8 617.560

T 7.50 x 7.50 x 9.46 180.82 1.782 1.561 36.29 22.98 1390.082 492.376 311.838 51.52 42.49 −29.3 1390.082

T 7.50 x 7.50 x 14.4 210.09 1.794 1.776 36.29 51.94 2034.814 492.376 704.755 104.30 49.37 −24.2 2034.814

T 6.00 x 8.00 x 11.2 231.39 1.872 1.536 44.39 17.97 1449.103 602.231 243.781 34.75 54.38 −16.4 1449.103
6/10
T 6.00 x 8.00 x 11.2 231.39 1.872 1.536 44.39 17.97 1449.103 602.231 243.781 34.75 54.38 −16.4 1449.103

7/10
Other

G Am V Am/V
Section
[kg/m] [m2/m] [cm3/m] [1/m]

T 1.25 x 1.50 x 0.384 1.7 0.133 210.32 631.775

T 1.63 x 1.75 x 0.476 2.1 0.165 261.29 631.025

T 1.00 x 2.00 x 0.421 1.8 0.146 230.97 630.290

T 1.75 x 2.00 x 0.531 2.3 0.184 290.97 631.262

T 1.25 x 2.50 x 0.652 2.8 0.184 357.42 513.897

T 2.00 x 2.50 x 0.789 3.4 0.222 432.90 512.301

T 2.00 x 3.00 x 0.881 3.8 0.247 483.22 511.514

T 2.50 x 3.00 x 1.17 5.0 0.269 641.93 419.260

T 3.00 x 4.00 x 1.50 6.5 0.345 825.80 418.183

T 4.00 x 4.00 x 2.27 9.8 0.393 1245.16 315.424

T 5.00 x 4.00 x 2.57 11.0 0.444 1406.45 315.371

T 3.00 x 6.00 x 3.24 13.9 0.450 1774.19 253.855

T 4.00 x 6.00 x 3.88 16.7 0.501 2129.03 235.396

T 4.00 x 6.00 x 4.79 20.6 0.501 2625.80 190.870

T 7.50 x 7.50 x 9.46 45.8 0.748 5832.25 128.313

T 7.50 x 7.50 x 14.4 67.4 0.748 8580.63 87.214

T 6.00 x 8.00 x 11.2 48.4 0.700 6167.73 113.540


8/10
T 6.00 x 8.00 x 11.2 48.4 0.700 6167.73 113.540

9/10
10/10

You might also like