Scribd
Upload
3 views

lcd_code

The document contains C code for initializing a microcontroller and a 128x128 pixel color TFT LCD. It includes functions to set up the clock system, initialize the LCD, and toggle an output pin in the main loop. The code demonstrates basic graphics operations and GPIO control on the microcontroller.

Uploaded by

svetoslavapetrova0103
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
3 views

lcd_code

The document contains C code for initializing a microcontroller and a 128x128 pixel color TFT LCD. It includes functions to set up the clock system, initialize the LCD, and toggle an output pin in the main loop. The code demonstrates basic graphics operations and GPIO control on the microcontroller.

Uploaded by

svetoslavapetrova0103
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

#include <stdio.

h>
#include <driverlib.h>
#include "grlib.h"
#include "Crystalfontz128x128_ST7735.h"

/*!
* \brief Graphic library context, contains all the objects on screen. You may
* think of it as "canvas" that is tied to the screen and symbols and shapes
* are drawn on it.
*
* \var g_sContext
*/
Graphics_Context g_sContext;

/*!
* \brief init_clock_system( ) - initializes the microcontroller's clocks. Uses the
DCO as
* main source, running at 16 MHz. The main clock (MCLK) and sub-module clock
(SMCLK) have
* been made equal to the DCO.
* \return None.
*/
void init_clock_system(void)
{
CS_setDCOFreq(CS_DCORSEL_1, CS_DCOFSEL_4); //DCO = 16 MHz
CS_initClockSignal(CS_SMCLK, CS_DCOCLK_SELECT, CS_CLOCK_DIVIDER_1); //SMCLK =
DCO clock
}

/*!
* \brief init_lcd( ) - initializes the 128x128 pixel colour TFT LCD
* \return None.
*/
void init_lcd(void)
{
Crystalfontz128x128_Init(); // Initializes display driver
Crystalfontz128x128_SetOrientation(LCD_ORIENTATION_UP); // Set default screen
orientation
Graphics_initContext(&g_sContext, &g_sCrystalfontz128x128); // Initializes
graphics context
Graphics_setForegroundColor(&g_sContext, GRAPHICS_COLOR_RED);
Graphics_setBackgroundColor(&g_sContext, GRAPHICS_COLOR_WHITE);
GrContextFontSet(&g_sContext, &g_sFontFixed6x8);
Graphics_clearDisplay(&g_sContext);

Graphics_drawStringCentered(&g_sContext, (int8_t *)"LCD TEST",


AUTO_STRING_LENGTH, 64, 10, OPAQUE_TEXT);
}

/*!
* \brief init( ) - initializes the microcontroller and board
* \return None.
*/
void init(void)
{
WDT_A_hold(WDT_A_BASE); // Stop watchdog timer

PMM_unlockLPM5(); // Disable the GPIO power-on default high-impedance mode to


activate previously configured port settings
FRAMCtl_configureWaitStateControl(FRAMCTL_ACCESS_TIME_CYCLES_1); //Needed for
DCO = 16 MHz

init_clock_system();

init_lcd();
}

/*!
* \brief main( ) - the main function of the program
* \return None.
*/
void main(void) {

init();

GPIO_setAsOutputPin(GPIO_PORT_P1, GPIO_PIN0);

while(1)
{
GPIO_setOutputHighOnPin(GPIO_PORT_P1, GPIO_PIN0);
__delay_cycles(200000);

GPIO_setOutputLowOnPin(GPIO_PORT_P1, GPIO_PIN0);
__delay_cycles(200000);
}
}

You might also like