BIM Course Contents

Module 1:- Brief of BIM .................................................................................................................................................. 2

Module 2:- Revit Architecture (Modelling, Shop Drawings, Quantities) ................................................................. 3
Module 3:- Massing in Autodesk Revit Architecture ................................................................................................. 4
Module 4:- Revit Structure (Structure Modelling, Rebar Modelling, Shop Drawings, Quantities) ..................... 5
Module 5:- Structural Steel Fabrication in Autodesk Revit Structure ..................................................................... 6
Module 6:- Revit MEP (Modelling, Shop Drawings, Quantities) ............................................................................. 7
Module 7:- Architectural, Structural & MEP Family Creation in Autodesk Revit .................................................. 9
Module 8:- Dynamo Plugin in Revit .......................................................................................................................... 10
Module 9:- Autodesk Navisworks (Clash Detection, Quantification, Animation) ................................................ 11
Module 10:- Building Cost Estimation using AutoCAD, Excel, Revit, Navisworks including 6D ...................... 12
Module 11:- Primavera P6 for Project Management & Planning .......................................................................... 13
Module 12:- Microsoft Project Professional .............................................................................................................. 14
Module 13:- Microsoft Power BI for Construction Management ........................................................................... 15
Module 14: 4D Planning using Synchro 4D ............................................................................................................. 16
Module 15: Tekla Structures (Steel / RCC / Rebar Modeling, Drawing, Reporting, Component Creation) ... 17
Module 16: Staad Pro (Modeling, Analysis, Design of RCC / Steel / PEB Structures) ..................................... 18
Module 17: Etabs (Modeling, Analysis, Design of RCC / Steel / PEB Structures) ............................................. 22
Module 18: AutoCAD Civil 3D .................................................................................................................................... 25
Module 19: BIM 360 ..................................................................................................................................................... 27

Page 1
Module 1:- Brief of BIM
• Introduction to BIM & its use in Construction Management Industry
• Definition of BIM According to Country Standards
• History of BIM
• Necessity of BIM
• Different Disciplines involved in BIM
• Software used in BIM
• Collaboration with ISO 19650 : BIM Project Management
• Methods to reduce risks and errors in construction projects

Page 2
Module 2:- Revit Architecture (Modelling, Shop Drawings,
Quantities)
• Introduction to Autodesk Revit Architecture
• Start a New Project
• Initial Settings while working in Project
• Link and Manage Structural Model
• Revit Coordinates System
• Setting Project Levels and Grids
• Create Floor Plans and Link the Designed Drawings
• View Template and View Range
• Walls and Walls Slabs Connection
• Floors and Floors Walls Connection
• Partitions and Wall Finish
• Wall Modifications and Skirting
• Doors and Windows
• Curtain Walls
• Ceiling and MEP Fixtures
• Model in Place
• Roof
• Stair, Stair Finish and Stair Floor Connection
• Railing, Angle Fillet, Curve Stone and Road Marks
• Ramp and Ramp Finish
• TopoSolid and Toposurface
• External Works and Landscape Features
• Parking Accessories ,Toilet Accessories and Furniture
• Introduction to Shop drawings and Creating Title Block
• Dimensions Plan
• Area & Function Plan
• Reflected Ceiling Plan
• Furniture Plan and Site Plan
• Project Browser Organization
• Scope Box, Break Line and View Reference
• Sections and Typical Details
• Elevations and Builder's Work
• Callouts, Doors and Windows Schedule
• Walls Schedules
• Walls Material Take-off (MTO)
• Floors, Ceiling and Roofs MTO
• Component Families Schedules
• Reflect Site Progress on BIM Model
• Extract Monthly Progress Sheets
• Exporting Drawings and Schedules

Page 3
Module 3:- Massing in Autodesk Revit Architecture
• Explanation of MASS and its applications
• Modelling techniques in MASS
• Explanation of options, such as 3D Snapping
• Difference between Ref Line and Model Line
• Explanation of Mass in Place
• Explanation of Mass Study (also known as Mass Overlay)
• Importing complex volumes from 3DS Max and Rhino
• Explanation of various patterns and their modelling techniques
• Parameterizing patterns and Surfaces
• Modelling openable, closable, and animated structures

Page 4
Module 4:- Revit Structure (Structure Modelling, Rebar Modelling,
Shop Drawings, Quantities)
• Introduction to Autodesk Revit Structure
• Start a New Project
• Initial Settings while working in Project
• Setting Project Grids and Levels
• View Range and Link the Designed Drawings
• Parameters, Filters, Visibility Graphics and View Template
• Plain Concrete & Structural Footing
• Column Neck and Tie Beams
• Slab on Grade & Columns
• Stairs
• Structural Slab and Beam System
• Structural Walls and Concrete Model Completion
• Footing Reinforcement
• Continuous Footing Reinforcement
• Beams and Beams System Reinforcement
• Slab on Grade Reinforcement
• Column Reinforcement
• Wall Reinforcement
• Stairs Reinforcement
• Steel Columns and Beams
• Steel Connections
• Steel Stair and Steel Railing
• Introduction to Shop drawings and Creating Title Block
• Add Views into Sheets
• Tagging and Annotations
• Shop Drawings Extraction
• Concrete Material Take-off Reports
• Rebar Material Take-off Reports
• Steel Material Take-off Reports
• Footing Reinforcement
• Beam and Beams System Reinforcement
• Columns Reinforcement
• Wall Reinforcement

Page 5
Module 5:- Structural Steel Fabrication in Autodesk Revit Structure
• Levels grids and columns
• Beams
• Beam system
• 2nd level floor construction
• Brace
• Foundation
• Column rafter connection
• Choosing the right connection
• Bolts
• Apex connection
• Creating custom connections
• Custom anchor connection
• Copying connections
• Creating a useful shortcut
• Cope skewed modifier
• Parametric cope
• Parametric cuts
• Contour cut
• Steel concrete beam connection
• Transferring connections
• Truss
• Importing annotation elements
• Setting up the views
• Dimensioning
• Section
• Tags
• Details
• Displaced 3D detail
• Placing views on sheets
• Schedules

Page 6
Module 6:- Revit MEP (Modelling, Shop Drawings, Quantities)
• Introduction to Autodesk Revit MEP
• Start a New Project
• Initial Settings while working in Project
• Revit Coordinates System
• Link Architectural Model and Manage it
• Setting up Grids and Levels
• Create Plans, Link Design Drawings and View Range
• Visibility Graphics, Parameters, Filters and View Template
• Scope Box and Section Box
• Introduction to HVAC Systems
• Place and Modify Mechanical Equipment
• Place and Modify Air Ducts and Ducts Fittings
• Place and Modify Air Terminals and Duct Accessories
• Place and Modify Duct Insulation
• Place and Modify Duct Supports
• Place and Modify HVAC Pipes
• Place and Modify HVAC Pipes Accessories
• HDPE to Steel Flange connection and Valve Pit
• Place and Modify HVAC Pipes Insulation
• Place and Modify HVAC Pipes Supports
• Introduction to Plumbing Systems
• Place and Modify Plumbing Fixture and Equipment
• Place and Modify Drainage Pipes and Pipes Accessories
• Place and Modify Water Supply Pipes (PPR) and Pipes Accessories
• Introduction to Fire Fighting Systems
• Place and Modify Fire Fighting Equipment
• Place and Modify Fire Fighting Pipes
• Place and Modify Fire Fighting Pipes Accessories
• Place and Modify Sprinklers
• Introduction to Electrical Systems
• Place and Modify Lighting Fixtures
• Place and Modify Power Terminals and Panel Boards
• Place and Modify Data Devices
• Create Circuit
• Place and Modify Power Cable Tray and Cable Tray Fittings
• Place and Modify Conduits and Conduits Fittings
• Coordination MEP VS MEP
• Coordination MEP vs. ARCH
• Choose Right Title Block and Create Parametric One
• Add Views into Sheets
• Sections, Callouts and Isometric Views
• Legends and Typical Details
• Break Line and View Reference
• Annotations and Tagging
• Where and How to add Access Panels
• Shop Drawings Extraction
• Duct Schedule in kilograms
• Duct Fittings Schedule in kilograms
Page 7
• Air Terminals, Duct Accessories and Mechanical Equipment Schedules
• Pipes and Pipes Fittings Schedules
• Pipes Accessories, Plumbing Fixtures and Sprinklers Schedules
• Cable Tray and Cable Tray Fittings Schedules
• Electrical Wires Schedule
• Lighting, Power and Data Devices Schedules

Page 8
Module 7:- Architectural, Structural & MEP Family Creation in
Autodesk Revit
• Introduction to Revit Family Creation
• Creating Custom Grid Heads and Level Heads in Revit Families
• Building a Parametric Mullion System
• Designing Custom Doors and Panels
• Lighting Fixtures: Designing a Custom Lamp Shade
• Four-Legged Table with Parametric Controls
• Railing Systems: Designing Balusters, Rails, and Posts
• Hosting and Nesting in Revit
• Custom Fire Boxes and Smoke Detectors
• Custom Stair Components, including Treads, Risers, and Nosing

Page 9
Module 8:- Dynamo Plugin in Revit
• Introduction to Revit Dynamo
• Navigating the UI and node library
• Placing and connecting Nodes
• Understanding data types
• Performing with Maths functions
• Using numbers to output other data types
• Creating a list of numbers
• Generating lists with sequence and range
• Using lists of numbers as inputs
• Modifying and analysing text strings
• Reading data from an excel spreadsheet
• The basics of managing lists
• The basics of managing nested lists
• Working with Excel data in dynamo
• Writing data to an excel spreadsheet
• Filtering data
• Sorting data
• Creating points
• Creating lines, polycurves and polygons
• Creating arcs and NURBS curves
• Using vectors to translate geometry
• Rotate and mirror with vectors and planes
• Creating surfaces and solids
• Creating solids with loft
• Modifying solids
• Exporting geometry as SAT and STL
• Accessing Revit geometry data
• Placing Revit families
• Placing adaptive components
• Creating views and sheets
• Exercises on Dynamo Scripts

Page 10
Module 9:- Autodesk Navisworks (Clash Detection, Quantification,
Animation)
• Introduction to Autodesk Navisworks
• Navisworks Interface
• Navisworks different files Formats
• View Cube and Navigation Bar
• Object Selection and Object Visibility
• Sectioning and View Points
• Grids
• Internal Comments, Consultant Comments and RFIs
• Measure, Redlines Mark-ups and Comments
• Object properties, Item Tools & Publish Model
• Clash Detection Test
• Clash Detection Report
• SYNC Between Revit and Navisworks
• Quantification Workbook
• Item Catalog
• Exporting to Excel and Pivot Table
• Resource Catalog
• Project Schedule of Activities
• 4D and 5D Simulation
• Animation
• Rendering

Page 11
Module 10:- Building Cost Estimation using AutoCAD, Excel, Revit,
Navisworks including 6D
• Introduction to Building Estimate
• Foundation Work
• Column Necks
• Grade Beam
• Slab on Grade
• Column in Superstructure
• Brickwork in Superstructure
• Stair
• Slab
• Parapet Wall
• Plaster work
• Tiles and Marbles
• Paint
• Bar Bending Schedule

Page 12
Module 11:- Primavera P6 for Project Management & Planning
• User Interface of Primavera P6
• How to Setup Auto Schedule & Calendar
• Creating a calendar of Projects
• Creating Milestones for Project
• Types of Links l FF l SS l SF I FS I Methods of linking
• Network Diagram l Task Information l Auto linking
• Planning for Small Live Projects and applying Basic Concepts
• Concept of Lead & Lag on Real Live projects
• Gant Chart Settings and Time Scale Settings
• Gant Chart Layout I Bar Styles
• Constraints in Primavera and its Application on Live Project
• Work Break Down Structure on Real Project
• Levels in WBS l Macro & Micro Scheduling
• How to Make Detailed WBS
• CPM Analysis and Manual Calculation
• CPM validation on Primavera
• Pert Analysis and Manual Calculation
• PERT Validation on Software
• Resource Planning l Manpower l Machinery l Material l
• Assigning Resources to Activities l Costing of Entire Project
• Resource Levelling l Manpower Over allocation l Manual Levelling
• Resource Levelling by Auto Levelling Method
• Project Tracking l Assigning Baseline to Project
• Project Monitoring l % Work Completion l Actual Site Progress
• Delay in Project l Delay in Start & Finish of Project l Real Time Tracking!
• Planned VS Actual l How to Keep an Eye on Actual Progress and Planned Progress

Page 13
Module 12:- Microsoft Project Professional
• Introduction to Project Management
• Introduction to MS-Project
• Introduction to Calendar, Types Calendars & Calendar Creation
• Task types & Relationship types
• Project Scheduling : Critical Part
• Work Breakdown Structure
• Introduction of Constraints, Types of Constraints & Application of Constraints in Project
• Define Resources, Types of Resources & Assign Resources. Calculate Project Budget
• What is Resource Analysis and Levelling. How to use Resource Analysis & Levelling in
MS Project to use resources efficiently.
• Project Updating with different methods with MS Project
• Project Tracking with Earned Value Analysis in MS Project with Practical example
• Filter & Groups in MS Project software
• Create Multiple Projects & How to track Multiple Projects with one Master MS Project file
• Customizing & Formatting in MS Project software
• Reports generation in MS Project Software

Page 14
Module 13:- Microsoft Power BI for Construction Management
• From Excel workbook to Creating report in Power BI Desktop
• Project Information Dashboard
• Daily Progress Report in Microsoft Excel
• Labour Plant Material (LMP) Dashboard
• Resources Dashboard

Page 15
Module 14: 4D Planning using Synchro 4D
• Planning and Scheduling
• 4D Planning
• Program Management in 4D
• Advanced Project Management
• Scheduling
• Program Development
• Project Control with the help of 4D Schedule

Page 16
Module 15: Tekla Structures (Steel / RCC / Rebar Modeling, Drawing,
Reporting, Component Creation)
• Define units and grids
• Draw foundations
• Draw foundation rebar reinforcement
• Draw columns
• Draw Foundation and Column Connection
• Copy Foundation and Columns
• Draw Rafters
• Draw Connection of the Frame
• Draw rails with manual connection
• Beams on the top of Columns
• Draw Connection for the Top beams
• Draw Purlins
• Draw Wind Columns
• Draw Bracing
• Draw Truss
• Draw Concrete slab with reinforcement
• Generate drawings
• Footing Reinforcement (Bar)
• Footing Reinforcement (Bar Group)
• Footing Reinforcement (Components)
• Components - Ungroup
• Rectangular Column Reinforcement
• Circular Column Reinforcement
• Beam Reinforcement
• Panel Reinforcement
• Slab Reinforcement
• Mesh bars by Area
• Slab bars Components
• Selection Filter
• The fundamental of Intelligent Custom Component
• Learn to create custom component parts
• Learn to create custom component details
• Learn to create custom component connections

Page 17
Module 16: Staad Pro (Modeling, Analysis, Design of RCC / Steel /
PEB Structures)
• Setting Up Configuration
• Starting a New Project
• Menu Bar
• Toolbar and Main Window
• Page Setup Controls
• Mode of Operation
• Analysis of a RCC Beam
• Defining the Nodes
• Understanding the Views in STAAD Pro
• Drawing the Beam
• Defining the Beam Section
• Assigning the Beam Section
• Assigning the Beam Supports
• Defining the Loads
• Assigning the Loads
• Analyzing the Beam
• Post Processing Mode
• Getting the Support Reactions
• Displaying the Moment Diagram
• Displaying the Shear Force Diagram
• Displaying the Deflection of a Beam
• Animation and Report Generation
• Analysis of a 2D Frame
• Setting up the Model
• Defining the Nodes
• Drawing the Beams and Columns
• Defining Beam and Column Sections
• Assigning Beam and Column Sections
• Assigning the Supports
• Defining the Loads
• Assigning the Loads
• Analyzing the Structure and Post Processing Mode
• Check Reactions, BMD, SFD and Deflections
• Analysis and Design of a 3D Frame
• Starting the Model
• Getting to Know the Structure
• Modeling the Structure
• Defining and Assigning the Frame Properties
• Assigning the Supports
• Defining the Beam Loads
• Defining the Floor Loads
• Assigning the Beam Loads
• Defining the Load Combination
• Defining the Design Parameters and Commands
• Assigning the Design Parameters and Commands
Page 18
• Redesigning the Sections
• Viewing the Results of Design
• Displaying Reactions, Deflection, SFD and BMD.
• Using Structure Wizard
• Starting the Model
• Understanding the Concept of Bays
• Modeling Frame Using Wizard
• Modeling Truss using Wizard
• Exploring the STAAD Pro Tools
• Move Tool
• Rotate Tool
• Mirror Tool
• View Options in STAAD Pro
• 3D Rendering Option
• Add Nodes in Beams
• Various Beam Adding Options
• Translational Repeat
• Circular Repeat
• View Individual Floors Separately
• Define a New Material
• Access Steel and Wood Database
• Moment Releases and Member Offset
• Starting a New Model
• Concept of Moment Release
• Full Moment Release
• Partial Moment Release
• Introduction to Member Offset
• Offsetting the Beam Members
• Miscellaneous Specification Options
• Read the Architectural Drawings
• Flow Map of a Project
• Reading the elevations
• Reading the Floor Plans
• Understanding the Grid Lines
• Reading the Sections
• Modeling of The Building
• Defining the Base Nodes
• Adding Beams at the Base
• Modeling of the Building Floors
• Concept of Modeling the Balcony
• Modeling of the First Floor Balcony
• Modeling of the Second Floor Balcony
• Correcting the Third Floor Plan
• Preliminary Design of Slab, Beam and Column
• Preliminary Design of Slab
• Preliminary Design of Beam
• Concept of Column Preliminary Design
• Calculation of the Dead Load

Page 19
• Calculation of the Live Load
• Calculation of the Preliminary size of the column
• Assigning The Section Properties
• Defining The Beam and Column Sections
• Concept of the Cracked Sections
• Assigning Cracked Section Properties
• Concept of Slab Rigidity
• Assigning the Master Slave Node
• Introduction to The Floor Diaphragm and Select Series-6
• Assigning the Floor Diaphragm
• Introduction to IS 1893:2002/2016
• Introduction to Base Shear
• Introduction to Seismic Code
• Introduction to Seismic Weight of the Building
• Horizontal Acceleration Coefficient
• Zone Factor (Z)
• Design Acceleration Coefficient (Sa/g)
• Response Reduction Factor (R)
• Importance Factor (I)
• Live Load Reduction
• Introduction to Dynamic Analysis
• Storey Shear
• Calculation of the Staircase Load
• Measuring Staircase Dimension from AutoCAD
• Calculating the Self Weight of Staircase
• Calculating the Floor Finish Load
• Calculating the Live Load on Staircase
• Application of the Wall Load
• Defining the Seismic Parameters
• Defining the Load Case Details
• Assigning the Seismic Loads
• Calculating the Wall Load
• Assigning the Wall Load
• Application of the Floor Loads
• Introduction to the Self Weight of the Slab
• Assigning the Self Weight of the Slab
• Application of the Floor Finish Load
• Application of the Partition Load
• Application of the Live Load
• Application of Wind Load
• Introduction to IS 875-Part 3
• Calculation of Design Wind Speed
• Calculation of Design Wind Pressure
• Definition of Wind Load in Staad Pro
• Application of Wind Load
• Application of the Staircase Load
• Defining the Secondary Beam
• Assigning the Load to the Washroom

Page 20
• Defining the New Beams for Staircase Load Distribution
• Applying the Dead Load of the Staircase
• Correcting the Floor Load Error
• Application of the Staircase Live Load
• Application of the Seismic Weight
• Introduction to the staad editor
• Copying the Loads For Seismic Weight
• Defining the Mass source
• Checking for Modeling Errors
• Reference Load Case Error
• Support Error
• Error in Earthquake Load Definition
• Checking SFD and BMD of the Building
• Codal Provision for load combination
• Making manual load combination
• Generating auto load combinations
• Error correction in load combination
• Selecting the Design Parameters
• Defining the Design Parameters
• Defining the Design Commands
• Passing the Failed Concrete Members
• Studying the Design Results
• Creating and Assigning the Beam and Column Groups
• Beam Design Results
• Column Design Results
• Providing the Rebars to the Selected Column
• Rebar Lapping Schematic Diagram
• Making Column Plans and Details
• Detailing other kinds of Columns
• Calculating the Lateral Tie Spacing
• Spacing in the Lapping Zone
• Concept of Extra Bars
• Getting the Beam Design Results from Staad Pro
• Designing the Top Reinforcement
• Designing the Bottom Reinforcement
• Detailing of the Adjacent Beam
• Concept of Lapping of Bars
• Codal Provision for the Stirrups
• Providing the Stirrups
• Response Spectrum Analysis
• Defining the RS Load Cases
• Application of the RS Loads
• Extracting Data From Staad.Pro
• Design of Footing
• Design of Slab
• Calculation of Slab Moments
• Calculation of Area of steel
• Detailing of slab

Page 21
Module 17: Etabs (Modeling, Analysis, Design of RCC / Steel / PEB
Structures)
• Introduction to the Grids
• Modelling of a Continuous Beam
• Analysis of The Continuous Beam
• Analysis of a Truss
• Preliminary Design
• Preliminary Design of Slab
• Preliminary Design of Beam
• Preliminary Design of Column
• Modeling of Building
• Read Architectural Drawing
• Define Grids
• Define Materials
• Define Section Properties
• Correction of Grids
• Modelling Up To Ground Floor
• Modelling of First Floor
• Modeling of Second and Third Floors
• Extruding the Model
• Modeling of Balcony
• Assigning Support to the Model
• Lowering The Tie Beam
• Design of Residential Building
• Modeling of Staircase
• Read Architectural Drawing of Staircase
• Define Reference Points and Reference Planes
• Model Staircase From Ground Floor to First Floor
• Model The Landing Beam
• Model Staircase From First Floor to Second Floor
• Advanced Modelling Options
• Model Secondary Beams
• Model Curved Beams
• Different Modes of Modelling a Beam
• Offsetting The Beam While Modelling
• Modelling Circular Columns
• Modelling Eccentric Columns
• Load Application
• Defining Load Patterns, Diaphragm and Mass Source
• Application of Partition Load
• Application of Shell/ Slab Load
• Application of Wall Load on Slab/Shell
• Meshing of Slab and Frame Structures
• Calculation of Seismic Weight, Base Shear and Storey Shear
• Seismic Load Calculation
• Base Shear Calculation
• Storey Shear Calculation
Page 22
• Application of Lateral Loads
• Application of Lateral Loads Introduction
• Application of Earthquake Load Method-1
• Application of Earthquake Load Method-2
• Application of Earthquake Load Method-3
• Application of Wind Load
• Load Combination and Structural Analysis
• Introduction To Load Combinations
• Defining The Load Combinations
• Analyzing The Building
• Design Of The Building
• Redesigning the Columns
• Design Checks To Be Performed
• Check for Section Failure
• Rebar Percentage
• P-M-M Interaction Ratio
• Beam Column Capacity
• Storey Displacement, Storey Drift and Drift Ratio
• Torsional Irregularity
• Detailing of Column Rebars
• Understanding the Rebar Values of ETABS
• Rebar Combination of the Plinth Level Column
• Sketching the Rebars of the Plinth Level Column
• Detailing the Rebars of the Ground Floor Column
• Detailing the Rebars of the First Floor Columns
• Detailing the Rebars of the Second Floor
• Concept of the Lapping of Bars in Floor Levels
• Concept of Detailing the Columns Having increasing Reinforcement Values
• Detailing of Columns with Increasing Reinforcement values upto First Floor
• Detailing of Columns with Increasing Reinforcement values at Second Floor
• Concept of Detailing of Similar Columns and Preparing Structural Drawings
• Shear Detailing : Getting results from ETABS
• Calculating the Required Spacing of the Lateral Ties
• Detailing of the Lateral Ties
• Detailing of Beam Rebars
• Overview of the Structural Drawing of Beam
• Studying the Results of ETABS
• Detailing of Top Mid Bars
• Detailing of Top Extra Bars
• Finalizing the Top Bars
• Detailing of the Bottom Reinforcement
• Grouping the Beam Details
• Detailing the Bars at the Beam Junction
• Concept of Lapping of Bars
• Detailing of Extra Bars at the Bottom
• Important Point to Remember
• Calculating the Stirrup Spacing
• Providing The Shear Reinforcement
Page 23
• Exporting ETABS Results To Excel
• Export Model Results
• Export Analysis Results
• Export Center of Mass and Center of Rigidity Values
• Export Design Results
• Design of Slab
• Inputs for Slab Design
• Calculation of Slab Moments
• Calculation of Area of steel
• Detailing of slab (Brief)
• Design checks to be performed
• Detailing of slab
• Slab Reinforcement Overview
• Reading the Structural Drawings of Slab
• Detailing of Bent up Bars

Page 24
Module 18: AutoCAD Civil 3D
• Connecting Objects and Styles
• Connecting Labels and Label Styles
• Connecting Objects to Objects
• Connecting Objects to Labels
• Sharing Data in a Dynamic Environment
• What Is Survey Data?
• Creating a Survey Database
• Importing Survey Data
• Automating Field-to-Finish
• Editing Survey Points
• Editing Survey Figures
• Creating Additional Points
• Understanding Surfaces
• Creating a Surface from Survey Data
• Using Breaklines to Improve Surface Accuracy
• Editing Surfaces
• Displaying and Analyzing Surfaces
• Annotating Surfaces
• Understanding Alignments
• Creating Alignments from Objects
• Creating Alignments Using the Alignment Creation Tools
• Editing Alignments
• Applying Design Criteria Files and Check Sets
• Using Alignment Styles
• Applying Alignment Labels and Label Sets
• Creating Station/Offset Labels
• Creating Segment Labels
• Using Tag Labels and Tables
• Creating Surface Profiles
• Displaying Profiles in Profile Views
• Creating Design Profiles
• Editing Profiles
• Using Design Check Sets and Criteria Files
• Applying Profile Styles
• Applying Profile View Styles
• Applying Profile View Bands
• Applying Profile Labels
• Creating and Applying Profile Label Sets
• Creating Profile View Labels
• Projecting Objects to Profile Views
• Understanding Corridors
• Creating an Assembly
• Creating a Corridor
• Applying Corridor Targets
• Creating Corridor Surfaces
• Using the Section Editor
Page 25
• Creating Sample Lines
• Creating Section Views
• Sampling More Sources
• Applying Section Styles
• Applying Section Labels
• Controlling Corridor Section Display with Code Set Styles
• Applying Labels with Code Set Styles
• Applying Section View Styles
• Applying Section View Bands
• Applying Group Plot Styles
• Creating Section View Labels
• Designing and Analyzing Boundaries Using Parcels4 lectures • 36min
• Understanding Parcels
• Creating Parcels from Objects
• Creating Parcels by Layout
• Editing Parcels
• Applying Parcel Styles
• Applying Parcel Area Labels
• Creating Parcel Segment Labels
• Editing Parcel Segment Labels
• Creating Parcel Tables
• Understanding Gravity Pipe Networks
• Creating Gravity Pipe Networks
• Editing Gravity Pipe Networks
• Understanding Pressure Pipe Networks
• Creating Pressure Pipe Networks
• Editing Pressure Pipe Networks
• Displaying Pipe Networks Using Styles
• Annotating Pipe Networks in Plan View
• Annotating Pipe Networks in Profile View
• Creating Pipe Network Tables
• Understanding Grading
• Understanding Feature Lines
• Creating Feature Lines
• Editing Feature Lines
• Understanding Grading Objects
• Creating Grading Objects
• Editing Grading Objects
• Combining Design Surfaces
• Analyzing Design Surfaces
• Calculating Earthwork Volumes
• Labelling Design Surfaces

Page 26
Module 19: BIM 360
• What is BIM 360
• What is a cloud platform
• BIM 360 modules
• BIM 360 classic v/s Next gen
• Forge and BIM 360 apps
• Managing users, roles, and companies
• Uploading the files and desktop connectors
• Managing files, folders, permission
• Collaboration using mark-ups
• Working with issues
• Using reviews to approve documents
• Revit cloud worksharing
• Design Collaboration
• Coordination & clash detection
• The RFI workflow
• Tracking project questions with RFIs
• The submittal workflow
• Working with submittals
• Working with checklist templates
• Working with checklist

Page 27