Scribd
Upload
13 views3 pages

Ee 323

This document is a mid-semester examination paper for the Electric Drives course (EE-323) at the National Institute of Technology, Arunachal Pradesh. It includes instructions for answering the questions and consists of ten questions, each worth 10 marks, covering various topics related to electric drives and motor control. Students are required to provide detailed answers with appropriate numbering and calculations.

Uploaded by

shantanu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views3 pages

Ee 323

This document is a mid-semester examination paper for the Electric Drives course (EE-323) at the National Institute of Technology, Arunachal Pradesh. It includes instructions for answering the questions and consists of ten questions, each worth 10 marks, covering various topics related to electric drives and motor control. Students are required to provide detailed answers with appropriate numbering and calculations.

Uploaded by

shantanu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

B.

TECH (EE) / 2023/EE / ES/ EE-323/3

Name: ……………………………

Roll No.: …………………………

NATIONAL INSTITUTE OF TECHNOLOGY


(Established by Ministry of Education, Govt. of India)
JOTE, DIST. PAPUM PARE, ARUNACHAL PRADESH, Pin-791113
Mid Semester Examination (Jan-June 2023)
Electric Drives (EE-323)

Time: 3 Hrs Full Marks: 100

Instructions:
 Clearly mention the Question number with each answer. (No
marks will be given to answers with inappropriate numbering.)
 The question paper consists of Ten questions of 10 marks each.

GROUP–A
(Answer to all the questions of this unit)

M CO
1 A 220 V, 960 rpm, 12.8 A separately excited dc [10] 3
motor has armature circuit resistance and
inductance of 2 ohm and 150 mH, respectively. It
is fed from a single-phase half controlled rectifier
with an ac source voltage of 230 V, 50 Hz.
Calculate:-
(i) Motor torque for α=600 and speed=600 rpm.
(ii) Motor torque for α=600 and T=20 N-m.
2 What are the different components of load [10] 2
torque? Draw the torque speed curves for
different types of loads.
3 A 3-phase, 100 kW, 6 pole, 960 rpm wound rotor
induction machine drives a load whose torque
varies such that a torque of 3000 N-m of 10 sec
duration is followed by a torque of 500 N-m of [10] 2
duration long enough for the motor to attain
steady-state speed. Calculate moment of inertia of
the flywheel, if motor torque should not exceed

1
B.TECH (EE) / 2023/EE / ES/ EE-323/3

twice the rated value. Moment of inertia of the


motor is 10 kg-m2. Motor has a linear speed-
torque curve in the region of interest.
4 Discuss the principle of load equalization. Derive [10] 3
the expression of the moment of inertia of the
flywheel in order to establish load equalization.
5 (a) Explain the working principle of Current 3
Hysteresis Controlled PWM with necessary
diagram, waveforms and equation.
(b) Derive the equation of current ripple in CHC [4+3+3=10]
PWM.
(c) Justify mathematically why CHC PWM
outperforms other PWM techniques in higher
switching frequency application.
6 A 2200V, 50 Hz, 3-phase, 6 Pole, Y- Connected,
squirrel cage induction motor has following
parameters:-
Rs=0.075 Ohm, Rr’= 0.12 Ohm, Xs=Xr’= 0.5
Ohm. [10] 3
The combined inertia of motor and load is 100
kg-m2.
(i) Calculate time taken and energy dissipated in
the motor during starting.
(ii) Calculate time taken and energy dissipated in
the motor when it is started by plugging.
7 Derive the generalized state equation of machine
using Kron’s primitive machine model. Also [10] 4
derive the equation of electromagnetic torque
from the same machine model.
8 Explain how we can control the speed of a three
phase symmetrical squirrel cage induction [10] 4
machine using vector control/ Field Oriented
control technique with necessary equations, block
diagram and waveforms.
9 Explain the operating principle of Space Vector
PWM. Also explain on what points SVPWM [10] 4
outperforms Sine PWM.

2
B.TECH (EE) / 2023/EE / ES/ EE-323/3

10 An Induction Machine with the following data is


to be used with an indirect vector controller:
5hp, Y-connected, 3-  , 60Hz, 4-pole, 200V,
RS  0.277 , RR  0.183 , Lm  0.0538H ,
[10] 4
Lr  0.05606H , Ls  0.0553H , J  0.01667kg  m ,
2

Rated speed= 1766.9 rpm.


Find the rated rotor flux linkages and torque
commands and the corresponding and the torque-
producing components of the stator current
command, the stator-current phasor command, the
torque-angle command, and the slip-speed
command. The drive is assumed to be a torque
amplifier.

---oo----

You might also like