0% found this document useful (0 votes)
28 views3 pages

segment_controller

The MAUGLO® Segment Controller is a robust solution for smart lighting systems, featuring secure communication through Ethernet or GSM/GPRS 4G/LTE and AES 128-bit encryption for data transmission. It includes six relay outputs for precise lighting control, automatic adjustments via a Wireless Thread network, and real-time monitoring capabilities. Designed for durability, it is suitable for outdoor installations with an optional IP65 rating for protection against environmental elements.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
28 views3 pages

segment_controller

The MAUGLO® Segment Controller is a robust solution for smart lighting systems, featuring secure communication through Ethernet or GSM/GPRS 4G/LTE and AES 128-bit encryption for data transmission. It includes six relay outputs for precise lighting control, automatic adjustments via a Wireless Thread network, and real-time monitoring capabilities. Designed for durability, it is suitable for outdoor installations with an optional IP65 rating for protection against environmental elements.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MAUGLO® Segment Controller Product Data

Model: SC501LTE0R-868/TFT

Mechanical data Technical data


Product Overview
Dimensions L x H x W L: 142.30mm x H:53.30mm x Supply voltage 100-240 VAC -15% ...+15%
W: 110.00mm
Nominal frequency 50/60 Hz (± 5 Hz)
The MAUGLO® Segment Controller is a versatile and remote adjustments and over-the-air updates, ensuring Weight 345 g (± 5 g)
robust solution, seamlessly integrating into smart that your system stays optimized with minimal effort. Housing Material Dimming control DALI / DALI 2.0
PC Polycarbonate/ABS DIN-rail interface
lighting systems. It offers secure communication through enclosure
Current consumption 20mA
Ethernet or GSM/GPRS 4G/LTE, with compatibility Equipped with six relay outputs for contactor control, Housing color average
Light Grey / Antracite Grey
across various mobile networks. Data transmission is the controller allows precise management of lighting Power consumption
Ingress protection 1W
safeguarded by AES 128-bit encryption, ensuring reliable elements, enabling dynamic and responsive adjustments IP20 (Optional IP65 external housing) (standby mode)

and secure connectivity. based on specific user requirements. Impact resistance IK06
Power consumption 5W
(Max operating)

Antenna 3 x SMA Backup power supply 5.5 V 5F


The MAUGLO® Segment Controller enables precise, The MAUGLO® Segment Controlleralso excels in
(1 GSM/GPRS - LTE; 2 GPS; 3 RF)
automatic control of individual light points via a Wireless electrical measurements, accurately monitoring voltages Operating temperature -40 ... +70 °C
Electrical safety Class II (B
Thread network (868MHz/915MHz/2.4GHz) and and currents across six input phases with ±1% precision.
Storage temperature -40 ... +85 °C
adheres to the IEEE 802.15.4 standard, ensuring smooth It provides comprehensive monitoring of currents for Mounting DIN TH35 (EN50022) mounting rail
integration into smart lighting ecosystems. at least six output lines, ensuring the reliability and
Operating humidity < 95% non-condensing Surge protection 6 kV
efficiency of your smart lighting infrastructure.
Configuring and updating the MAUGLO® Segment
Controller is simple, using an intuitive web application for

www.mauglo.com PAGE 1 www.mauglo.com PAGE 2


Measurement and control characteristics Communication with server Communication with luminaires

Relay Output 6, 5VDC Non-Latching Digital input 6 Low voltage input Network Interface GSM/GPRS 4G/LTE-M modem Radio Protocol Open Thread and proprietary
networking protocols
Relay max Switching Voltage 250 VAC, 110 VDC Type Dry contact Network Connection Nano SIM (4FF), eSIM (MFF),
Frequency 868MHz/915MHz/2.4GHz
iSIM (SoC)
Relay state Normally Open Voltage 5V
Network protocol TCP/IP (TCP, MQTT), IPv4, IPv6 Standard IEEE 802.15.4
Maximum Switching Current 5A
Communication speed 10/100Mbp Modulation Sub-GHz FSK PHY, 2-Level GFSK
Ethernet RJ-45 connector, Network type Self-healing mesh topology
100/10 Mbps, DHCP
Data rate 100 kbit/s
Wi-Fi Dual band Wi-Fi® 11a/b/g/n
Voltage measurements 2 x 3 phase lines Analog input 1 Low voltage input Data encryption AES-128-bit
Data encryption AES 128-bit
Range 0-350V Range Input range 0-10 V, 0-20mA Recomended up to 350 end devices
Firmware update FOTA (Firmware-over the air) network size
Accuracy ± 1% Accuracy ± 2%
Max Voltage 12V

Wiring diagramm
Voltage measurements 2 x 3 phase lines Analog input 1 Low voltage input
Range 0-350V Range Input range 0-10 V, 0-20mA
Accuracy ± 1% Accuracy ± 2%
Max Voltage 12V

Current measurement 6 individual phase lines Serial interface RS-485 (multiple baud rates)
Output mA or 0.333V at rated current USB 1x Type C, 3.2 Gen 2
Detection range 5 to 120 Amps
Accuracy ± 1% from 5% to 120% Fuse Replacable
of rated current
Fuse Load 1A 300V SLOW
Insulation Voltage 600Vac

www.mauglo.com PAGE 3 www.mauglo.com PAGE 4


Measured parameters Features Standards and approvals

Phase Voltage (V) Real-time monitoring and diagnostics

Phase Current (mA) Astronomical calendar scheduler LVS EN IEC 61000-3-2:2019+A1:2021

Active power (W) Lighting schedule management LVS EN 61000-3-3:2013+A1:2019+A2:2022+AC:2022

Reactive pover (VAR) Remonte line ON/OFF switching LVS EN 61000-4-2:2009

Communication strength (%) Simplified maintenance LVS EN 61000-4-3:2021

Power Consumption (W) Fault monitoring and detection ETSI EN 301 489-1 V2.1.1 (2017-02)

Energy consumption (Active kWh /Reactive kVARh) Energy consumption optimization and cost savings LVS EN 61000-4-4:2013

Power factor Cosφ Power consumption monitoring ETSI EN 301 489-1 V2.2.3 (2019-11)

Operating temperature °C Voltage Fluctuation Reporting LVS EN 61000-4-5:2014

Frequency Real-time clock and calendar support ETSI EN 301 489-3 V2.1.1 (2019-03)

Line On/Off cycles counter Event Memory System LVS EN 61000-4-6:2014+AC:2015

Cabinet door statuss Remote Configuration and Upgrade LVS EN 61000-4-8:2010

LVS EN IEC 61000-4-11:2020+AC:2022

ETSI EN 301 489-52 V1.2.1 (2021-11)

LVS EN 61547:2010

Application LVS EN IEC 55015:2019+A11:2020+A11:2022

01 02 03 04 05
Urban Decorative Industrial Roadways Airports 2014/35/EU Low voltage (LVD) directive
Lighting Lighting
EN IEC 62311:2020

EN IEC 62368-1:2015

06 07 08 09 10
Railway Waterfronts Highways Parks Public
Station Transportation
Hubs

11 12 13 14 15
Intersections Tunnels Residental Gas stations Pedestrian way
areas

Legal Disclaimer

Installation MAUGLO® All rights reserved. The specifications provided herein are subject to change without prior notice. No
representation or warranty, whether expressed or implied, is made regarding the accuracy or completeness of the
The MAUGLO® Segment Control Unit requires optimal protection against environmental elements. It is best housed information contained herein. Any reliance on the information presented is at the user’s discretion, and all liability
in a durable metal cabinet with an IP65 rating (equivalent to NEMA type 4), ensuring resistance to dust and water for actions taken in reliance thereon is expressly disclaimed. The MAUGLO® brand and its products are subject to
exposure. This level of protection makes it ideal for outdoor installations, shielding the internal components from continuous improvement and innovation, and as such, users are advised to refer to the latest documentation for the
harsh weather conditions and ensuring reliable, long-term performance in diverse environments. most up-to-date information on specifications and features.

www.mauglo.com PAGE 5 www.mauglo.com PAGE 6

You might also like