2/25/22, 11:42 AM Basic Networking Commands Explained with Examples

Basic Networking Commands Explained with Examples

Tracert
This command is used to diagnose path-related problems. On an IP network, routers exchange IP packets between the source and
the destination. They take IP packets from the source host and forward them in a sequence until they reach the destination host. The
sequence of routers between the source and destination is known as the path. A path consists of all routers in a sequence that IP
packets sent from the source host traverse to reach the destination host.

The tracert command prints the path. If all routers on the path are functional, this command prints the full path. If a router is down
on the path, this command prints the path up to the last operational router.

The tracert command uses the following syntax.

tracert Destination Name or IP address

The following command traces the path to the host named www.google.co.in.

tracert www.google.co.in

The following image shows the output of this command.

The following table lists some important options of the tracert command.

Option Description

https://www.computernetworkingnotes.com/networking-tutorials/basic-networking-commands-explained-with-examples.html 1/5
2/25/22, 11:42 AM Basic Networking Commands Explained with Examples

-d Do not resolve the IP addresses of intermediate routers to their names.

-h Specifies the maximum number of hops (routers) to search on the path. The default is 30 hops.

-w Specifies the amount of time in milliseconds to wait for a reply message from the router. If not received within the
time-out, an asterisk (*) is displayed. The default time-out is 4000 (4 seconds).

Ping
The ping command is used to test connectivity between two hosts. It sends ICMP echo request messages to the destination. The
destination host replies with ICMP reply messages. If the ping command gets a reply from the destination host, it displays the reply
along with round-trip times.

The ping command uses the following syntax.

ping destination host IP or name

The following command tests connectivity between the host computer and Google's server.

ping google.com

The following image shows the output of this command.

If you specify the hostname as an argument, the ping command uses the configured DNS client service to automatically translate the
hostname into the IP address.

Arp
To send IP packets, a computer needs two addresses. These addresses are the MAC address and the IP address. A MAC address is the
physical or hardware address of the NIC. An IP address is the logical or software address of NIC. If a computer knows the IP address
of the destination computer but it does not know the MAC address of the destination computer, it uses the ARP protocol to know
the MAC address of the destination computer.

The ARP protocol broadcasts a given IP address over a local network. The corresponding host responds to the broadcast with its
MAC address. To avoid repetition, ARP stores the answer in a table known as ARP table. ARP maintains a separate ARP table for
each NIC.

To view the ARP table, you can use the following command.

arp

By default, this command displays the ARP table of the active NIC. If multiple NICs are installed on the computer, you can use the -a
option with this command. If the -a option is used, the ARP command displays all ARP tables.

The following image shows the output of the arp command when used with the -a option.

https://www.computernetworkingnotes.com/networking-tutorials/basic-networking-commands-explained-with-examples.html 2/5
2/25/22, 11:42 AM Basic Networking Commands Explained with Examples

To display the ARP cache entry for a specific IP address, specify the IP address with the -N option. For example, the following
command displays the ARP cache table for the interface that is assigned the IP address 192.168.42.171.

Arp -a -N 192.168.42.171

The following image shows the output of the above command.

Netstat
This command displays active connections, ports on which the computer is listening, Ethernet statistics, the IP routing table, and IP
statistics.

The output of this command is organized in rows and columns. Each row represents a new connection or an entry in the output. It
contains four columns. These columns provide the following information about the row.

Proto: - This column displays the name of the protocol (TCP or UDP).

Local Address: - This column displays the IP address of the local computer and the port number being used. If the port is not yet
established, the port number is shown as an asterisk (*).

Foreign Address: - This column displays the IP address and port number of the remote computer to which the port is connected.

State: - This column displays the status of the connection.

The following image shows the sample output of this command.

https://www.computernetworkingnotes.com/networking-tutorials/basic-networking-commands-explained-with-examples.html 3/5
2/25/22, 11:42 AM Basic Networking Commands Explained with Examples

Options and parameters

Option Description

-a Displays all active TCP connections and the TCP and UDP ports on which the computer is listening.

-e Displays Ethernet statistics, such as the number of bytes and packets sent and received.

-n Displays active TCP connections, however, addresses and port numbers are expressed numerically and no attempt is
made to determine names.

-o Displays active TCP connections and includes the process ID (PID) for each connection.

-p Shows connections for the protocol specified by Protocol. In this case, the Protocol can be TCP, UDP, tcpv6, or udpv6.

-s Displays statistics by protocol. By default, statistics are shown for the TCP, UDP, ICMP, and IP protocols.

-r Displays the contents of the IP routing table.

Ipconfig
This command displays all current TCP/IP network configuration values and refreshes Dynamic Host Configuration Protocol (DHCP)
and Domain Name System (DNS) settings. This command is mainly used to view the IP addresses on the computers that are
configured to obtain their IP address automatically.

The following image shows the sample output of this command.

https://www.computernetworkingnotes.com/networking-tutorials/basic-networking-commands-explained-with-examples.html 4/5
2/25/22, 11:42 AM Basic Networking Commands Explained with Examples

The following table lists some important options of the ipconfig command.

Used Displays the IP address, subnet mask, and default gateway for all adapters.
without
parameters

/all Displays the full TCP/IP configuration for all adapters.

/renew Renews DHCP configuration for all adapters (if an adapter is not specified) or for a specific adapter if the Adapter
[Adapter] parameter is included.

/release Sends a DHCPRELEASE message to the DHCP server to release the current DHCP configuration and discard the IP
[Adapter] address configuration for either all adapters (if an adapter is not specified) or for a specific adapter if the Adapter
parameter is included.

/flushdns Flushes and resets the contents of the DNS client resolver cache.

That's all for this tutorial. If you like this tutorial, please share it with friends via your favorite social networking sites.

By ComputerNetworkingNotes Updated on 2021-09-17 09:04:09 IST

ComputerNetworkingNotes Networking Tutorials Basic Networking Commands Explained with Examples

Full Form of Hardware and Networking Devices Network Operating System Features and Functions
We do not accept any kind of Guest Post. Except Guest post submission, for any other query (such as adverting opportunity, product
advertisement, feedback, suggestion, error reporting and technical issue) or simply just say to hello mail us
[email protected]

Computer Networking Notes and Study Guides © 2022. All Rights Reserved.
About Privacy Policy Terms and Conditions

https://www.computernetworkingnotes.com/networking-tutorials/basic-networking-commands-explained-with-examples.html 5/5