Topic Serial Difficulty Level Question Link Unlisted Link

Arrays/Strings- 1

1 Easy Remove Element - LeetCode

https://youtu.be/xj5Xd_Nfm24

2 Easy Find the Index of the First Occurrence in

https://youtu.be/WOZo3IeWE98

3 Easy Longest Common Prefix - LeetCode

https://youtu.be/P4rV9qW55Ck

4 Easy Length of Last Word - LeetCode

https://youtu.be/n8y0Twfcf-Y

5 Easy Roman to Integer - LeetCode

https://youtu.be/QBIe-iXLgAw

6 Easy Merge Sorted Array - LeetCode

https://youtu.be/F6Ng0QJbWs8

7 Easy Best Time to Buy and Sell Stock -

https://youtu.be/upkF2hUd5dg

8 Medium Remove Duplicates from Sorted Array II -

https://youtu.be/zI15jCfADpI

9 Medium Rotate Array - LeetCode

https://youtu.be/2tAyVoiKNew

10 Medium Best Time to Buy and Sell Stock II

11 Medium Jump Game - LeetCode

12 Medium Reverse Words in a String - LeetCode

https://youtu.be/nP-vkiKyUug
13 Hard Trapping Rain Water - LeetCode

14 Hard Candy -

Arrays/Strings- 2

15 Easy Defanging an IP Address - LeetCode

https://youtu.be/Oq4cPtWeP2M

16 Easy Maximum Number of Words Found in Se

https://youtu.be/qBSXZrU-ncw

17 Easy Check If Two String Arrays are Equivalen

https://youtu.be/gzb5H7qF5wg

18 Easy Number of Senior Citizens - LeetCode

https://youtu.be/gvy9B1JK-co

19 Medium Minimum Amount of Time to Collect Garb

20 Medium Find and Replace Pattern - LeetCode

https://youtu.be/LKs-pWrm0aQ

21 Medium Number of Pairs of Strings With Concate

https://youtu.be/O5khhibfKME

22 Hard Valid Number - LeetCode

Matrix

23 Medium Valid Sudoku - LeetCode

https://youtu.be/lj9cmdPvt44

24 Medium Spiral Matrix - LeetCode

https://youtu.be/Pdy5SJrv-J8
25 Medium Rotate Image - LeetCode

https://youtu.be/iqoqlHvcZJI

26 Medium Set Matrix Zeroes - LeetCode

27 Medium Game of Life - LeetCode

2 Pointers

28 Easy

https://leetcode.com/problems/valid-

https://youtu.be/C6v0dBVrvbw

29 Easy

https://leetcode.com/problems/is-

https://youtu.be/3V96ois4YSs

30 Medium

https://leetcode.com/problems/two-sum-ii-

https://youtu.be/26f-QDKLzMQ

31 Medium

https://leetcode.com/problems/container-

https://youtu.be/JEAcl9zTpzE

32 Medium

https://leetcode.com/problems/3sum

https://youtu.be/5Cz3FzCRVzY

Sliding Window

33 Medium

https://leetcode.com/problems/minimum-

https://youtu.be/5mlk4xFBoWA

34 Medium

https://leetcode.com/problems/longest-

https://youtu.be/UGX8QMSpZ_Q
35 Hard

https://leetcode.com/problems/substring-

36 Hard

https://leetcode.com/problems/minimum-

https://youtu.be/OTadHSqZmOc

Hashmap

37 Easy

https://leetcode.com/problems/ransom-

https://youtu.be/wHTLlMkq3Fc

38 Easy

https://leetcode.com/problems/isomorphi

https://youtu.be/jCz0IgK4yYA

39 Easy

https://leetcode.com/problems/word-

https://youtu.be/mOk_VAT6-oI

40 Easy

https://leetcode.com/problems/valid-

https://youtu.be/z9-TtSvoRIU

41 Easy

https://leetcode.com/problems/two-sum

https://youtu.be/Ux0Fqy0cx9M

42 Medium

https://leetcode.com/problems/group-

https://youtu.be/MxdE6ekmzgk

43 Medium

https://leetcode.com/problems/longest-

https://youtu.be/0PUpzsUqyEM
Stack 44 Easy

https://leetcode.com/problems/valid-

https://youtu.be/xnA2x0wZRlw

45 Easy

https://leetcode.com/problems/next-

https://youtu.be/aloGT1R1JUA

46 Medium

https://leetcode.com/problems/min-stack

https://youtu.be/LGkIEDu7Xc0

47 Medium

https://leetcode.com/problems/simplify-

https://youtu.be/2YmEhXMjrmI

Linked List

48 Easy

https://leetcode.com/problems/linked-list-

https://youtu.be/G56TwaqGa-I

49 Easy

https://leetcode.com/problems/merge-two-

https://youtu.be/NQczlFR3vuo

50 Medium

https://leetcode.com/problems/add-two-

https://youtu.be/Bk3EAQD6r7Q

51 Medium

https://leetcode.com/problems/reverse-

https://youtu.be/X1z7DRZPnUU

52 Medium

https://leetcode.com/problems/rotate-list
https://youtu.be/3R_rVYY9VCA

53 Medium

https://leetcode.com/problems/remove-

https://youtu.be/yLhvHpiNT-s

54 Hard

https://leetcode.com/problems/reverse-

https://youtu.be/kAVzOQeXnUg

Binary Search

55 Easy

https://leetcode.com/problems/search-

https://youtu.be/uBsSov_JRuQ

56 Medium

https://leetcode.com/problems/search-a-

https://youtu.be/68KZeWPwsdk

57 Medium

https://leetcode.com/problems/find-peak-

https://youtu.be/goWqYMiHrIo

58 Medium

https://leetcode.com/problems/search-in-

https://youtu.be/evr5OjXMcgI

59 Hard

https://leetcode.com/problems/median-of-

Kadane's

Algo

60 Medium

https://leetcode.com/problems/maximum-

61 Medium

https://leetcode.com/problems/maximum-
Bit Manipulation

62 Easy

https://leetcode.com/problems/add-binary

https://youtu.be/2JJD8PeKqCE

63 Easy

https://leetcode.com/problems/reverse-

64 Easy

https://leetcode.com/problems/number-of-

https://youtu.be/GJK1FwhljJA

65 Easy

https://leetcode.com/problems/single-

https://youtu.be/ycxJYIfPtu4

Math

66 Easy

https://leetcode.com/problems/palindrom

https://youtu.be/JnGbicu7Jzw

67 Easy

https://leetcode.com/problems/sqrtx

https://youtu.be/KBl2nBVRDI0

68 Medium

https://leetcode.com/problems/powx-n

Backtracking

69 Medium

https://leetcode.com/problems/combinati

70 Medium

https://leetcode.com/problems/permutatio

71 Medium

https://leetcode.com/problems/combinati
72 Medium

https://leetcode.com/problems/n-queens-

73 Medium

https://leetcode.com/problems/letter-

Binary Tree

74 Easy

https://leetcode.com/problems/maximum-

https://youtu.be/hFL_WM5Hl1w

75 Easy

https://leetcode.com/problems/symmetric-

https://youtu.be/WdPZ5osYUbE

76 Easy

https://leetcode.com/problems/path-sum

https://youtu.be/9lmuCOxxBbk

77 Medium

https://leetcode.com/problems/lowest-

https://youtu.be/_zAXYaswt2M

78 Medium

https://leetcode.com/problems/count-

https://youtu.be/uMJGendh0N4

Binary Tree BFS

79 Easy

https://leetcode.com/problems/average-

https://youtu.be/AF4hnkbRCkw

80 Medium

https://leetcode.com/problems/binary-

https://youtu.be/4kXtK1bGURU
81 Medium

https://leetcode.com/problems/binary-

https://youtu.be/rgm7lFJMxtg

Binary Search Tree

82 Medium

https://leetcode.com/problems/validate-

https://youtu.be/mHelNOQz4qM

83 Medium

https://leetcode.com/problems/kth-

https://youtu.be/lKTk37knvhw

84 Medium

https://leetcode.com/problems/minimum-

https://youtu.be/HHbMPXYsUuM

Graph General

85 Medium

https://leetcode.com/problems/number-of-

86 Medium

https://leetcode.com/problems/surrounde

87 Medium

https://leetcode.com/problems/clone-

88 Medium

https://leetcode.com/problems/course-

Heap 89 Medium

https://leetcode.com/problems/kth-largest-

90 Hard
https://leetcode.com/problems/find-

1D DP

91 Easy

https://leetcode.com/problems/climbing-

92 Medium

https://leetcode.com/problems/coin-

93 Medium

https://leetcode.com/problems/house-

94 Medium

https://leetcode.com/problems/longest-

95 Medium

https://leetcode.com/problems/word-

Multi Dimensional DP

96 Medium

https://leetcode.com/problems/longest-

97 Medium

https://leetcode.com/problems/minimum-

98 Medium

https://leetcode.com/problems/triangle

99 Hard

https://leetcode.com/problems/best-time-

100 Hard

https://leetcode.com/problems/best-time-
Topic Serial No. Difficulty Level Question Link:

1 Easy Remove Element - LeetCode

2 Easy Find the Index of the First Occurrence in a String - LeetCode

3 Easy Longest Common Prefix - LeetCode

4 Easy Length of Last Word - LeetCode

5 Easy Roman to Integer - LeetCode

6 Easy Merge Sorted Array - LeetCode

Arrays/Strings - 1 7 Easy Best Time to Buy and Sell Stock - LeetCode

8 Medium Remove Duplicates from Sorted Array II - LeetCode

9 Medium Rotate Array - LeetCode

10 Medium Best Time to Buy and Sell Stock II - LeetCode

11 Medium Jump Game - LeetCode

12 Medium Reverse Words in a String - LeetCode

13 Hard Trapping Rain Water - LeetCode

14 Hard Candy - LeetCode

15 Easy Defanging an IP Address - LeetCode

16 Easy Maximum Number of Words Found in Sentences - LeetCode

17 Easy Check If Two String Arrays are Equivalent - LeetCode

Arrays/Strings - 2 18 Easy Number of Senior Citizens - LeetCode

19 Medium Minimum Amount of Time to Collect Garbage - LeetCode

20 Medium Find and Replace Pattern - LeetCode

21 Medium Number of Pairs of Strings With Concatenation Equal to Target - LeetCode

22 Hard Valid Number - LeetCode

23 Medium Valid Sudoku - LeetCode

24 Medium Spiral Matrix - LeetCode

Matrix 25 Medium Rotate Image - LeetCode

26 Medium Set Matrix Zeroes - LeetCode

27 Medium Game of Life - LeetCode

28 Easy

https://leetcode.com/problems/valid-palindrome

29 Easy

https://leetcode.com/problems/is-subsequence
2 Pointers 30 Medium

https://leetcode.com/problems/two-sum-ii-input-array-is-sorted

31 Medium

https://leetcode.com/problems/container-with-most-water

32 Medium

https://leetcode.com/problems/3sum

33 Medium

https://leetcode.com/problems/minimum-size-subarray-sum

Sliding Window 34 Medium

https://leetcode.com/problems/longest-substring-without-repeating-characters

35 Hard

https://leetcode.com/problems/substring-with-concatenation-of-all-words

36 Hard

https://leetcode.com/problems/minimum-window-substring

37 Easy

https://leetcode.com/problems/ransom-note

38 Easy

https://leetcode.com/problems/isomorphic-strings

39 Easy

https://leetcode.com/problems/word-pattern

Hashmap 40 Easy

https://leetcode.com/problems/valid-anagram

41 Easy

https://leetcode.com/problems/two-sum
42 Medium

https://leetcode.com/problems/group-anagrams

43 Medium

https://leetcode.com/problems/longest-consecutive-sequence

44 Easy

https://leetcode.com/problems/valid-parentheses

45 Easy

https://leetcode.com/problems/next-greater-element-i/

Stack 46 Medium

https://leetcode.com/problems/min-stack

47 Medium

https://leetcode.com/problems/simplify-path

48 Easy

https://leetcode.com/problems/linked-list-cycle

49 Easy

https://leetcode.com/problems/merge-two-sorted-lists

50 Medium

https://leetcode.com/problems/add-two-numbers

Linked List 51 Medium

https://leetcode.com/problems/reverse-linked-list-ii

52 Medium

https://leetcode.com/problems/rotate-list

53 Medium

https://leetcode.com/problems/remove-nth-node-from-end-of-list
54 Hard

https://leetcode.com/problems/reverse-nodes-in-k-group

55 Easy

https://leetcode.com/problems/search-insert-position

56 Medium

https://leetcode.com/problems/search-a-2d-matrix

Binary Search 57 Medium

https://leetcode.com/problems/find-peak-element

58 Medium

https://leetcode.com/problems/search-in-rotated-sorted-array

59 Hard

https://leetcode.com/problems/median-of-two-sorted-arrays

Kadane's Algo 60 Medium

https://leetcode.com/problems/maximum-subarray

61 Medium

https://leetcode.com/problems/maximum-sum-circular-subarray

62 Easy

https://leetcode.com/problems/add-binary

Bit Manipulation 63 Easy

https://leetcode.com/problems/reverse-bits

64 Easy

https://leetcode.com/problems/number-of-1-bits

65 Easy

https://leetcode.com/problems/single-number
66 Easy

https://leetcode.com/problems/palindrome-number

Math 67 Easy

https://leetcode.com/problems/sqrtx

68 Medium

https://leetcode.com/problems/powx-n

69 Medium

https://leetcode.com/problems/combinations

70 Medium

https://leetcode.com/problems/permutations

Backtracking 71 Medium

https://leetcode.com/problems/combination-sum

72 Medium

https://leetcode.com/problems/n-queens-ii

73 Medium

https://leetcode.com/problems/letter-combinations-of-a-phone-number

74 Easy

https://leetcode.com/problems/maximum-depth-of-binary-tree

75 Easy

https://leetcode.com/problems/symmetric-tree

Binary Tree 76 Easy

https://leetcode.com/problems/path-sum

77 Medium

https://leetcode.com/problems/lowest-common-ancestor-of-a-binary-tree
78 Medium

https://leetcode.com/problems/count-complete-tree-nodes

79 Easy

https://leetcode.com/problems/average-of-levels-in-binary-tree

Binary Tree BFS 80 Medium

https://leetcode.com/problems/binary-tree-level-order-traversal

81 Medium

https://leetcode.com/problems/binary-tree-right-side-view

82 Medium

https://leetcode.com/problems/validate-binary-search-tree

Binary Search Tree 83 Medium

https://leetcode.com/problems/kth-smallest-element-in-a-bst

84 Medium

https://leetcode.com/problems/minimum-absolute-difference-in-bst

85 Medium

https://leetcode.com/problems/number-of-islands

Graph General 86 Medium

https://leetcode.com/problems/surrounded-regions

87 Medium

https://leetcode.com/problems/clone-graph

88 Medium

https://leetcode.com/problems/course-schedule/

89 Medium

https://leetcode.com/problems/kth-largest-element-in-an-array
Heap 90 Hard

https://leetcode.com/problems/find-median-from-data-stream

91 Easy

https://leetcode.com/problems/climbing-stairs

92 Medium

https://leetcode.com/problems/coin-change

1D DP 93 Medium

https://leetcode.com/problems/house-robber

94 Medium

https://leetcode.com/problems/longest-increasing-subsequence

95 Medium

https://leetcode.com/problems/word-break

96 Medium

https://leetcode.com/problems/longest-palindromic-substring

Multi Dimensional DP 97 Medium

https://leetcode.com/problems/minimum-path-sum

98 Medium

https://leetcode.com/problems/triangle

99 Hard

https://leetcode.com/problems/best-time-to-buy-and-sell-stock-iii

100 Hard

https://leetcode.com/problems/best-time-to-buy-and-sell-stock-iv
TCS Series eBook
Q1. Non-Repeating Element
Find the first non-repeating element in a given array arr of N integers.
Note: Array consists of only positive and negative integers and not zero.
Example 1:
Input : arr[] = {-1, 2, -1, 3, 2}
Output : 3
Explanation:
-1 and 2 are repeating whereas 3 is
the only number occuring once.
Hence, the output is 3.
Example 2:
Input : arr[] = {1, 1, 1}
Output : 0
Your Task:
This is a function problem. The input is already taken care of by the driver code. You
only
need to complete the function firstNonRepeating() that takes an array (arr), sizeOfArray
(n),
and returns the first non-repeating element. The driver code takes care of the printing.
Expected Time Complexity: O(N).
Expected Auxiliary Space: O(N).

Constraints:
1 <= N <= 107
-1016 <= Ai <= 1016
{Ai !=0 }
Answer
Q2. Airport security officials have confiscated several items of the passenger at the
security
checkpoint. All the items have been dumped into a huge box(array). Each item
possessed a
certain amount of risk(0,1,2). Here is the risk severity of the item representing an array[]
of
N number of integer values. The risk here is to sort the item based on their level of risk
values range from 0 to 2.
Example 1:
Input:
7-----------Value of N
[1,0,2,0,1,0,2]-> Element of arr[0] to arr[N-1], while input each element is separated by
new
line
Output:
0 0 0 1 1 2 2 -> Element after sorting based on the risk severity.
Answer
Q3. Array Subset of another array
Given two arrays: a1[0..n-1] of size n and a2[0..m-1] of size m. Task is to check whether
a2[]
is a subset of a1[] or not. Both the arrays can be sorted or unsorted.
Example 1:
Input:
a1[] = {11, 1, 13, 21, 3, 7}

a2[] = {11, 3, 7, 1}
Output:
Yes
Explanation:
a2[] is a subset of a1[]
Example 2:
Input:
a1[] = {1, 2, 3, 4, 5, 6}
a2[] = {1, 2, 4}
Output:
Yes
Explanation:
a2[] is a subset of a1[]
Example 3:
Input:
a1[] = {10, 5, 2, 23, 19}
a2[] = {19, 5, 3}
Output:
No
Explanation:
a2[] is not a subset of a1[]
Your Task:
You don't need to read input or print anything. Your task is to complete the function
isSubset() which takes the array a1[], a2[], its size n and m as inputs and return "Yes" if
arr2
is subset of arr1 else return "No" if arr2 is not subset of arr1.

Expected Time Complexity: O(n)

Expected Auxiliary Space: O(n)
Constraints:
1 <= n,m <= 105
1 <= a1[i], a2[j] <= 106
Answer
Q4. Sort an array of 0s, 1s and 2s
Given an array of size N containing only 0s, 1s, and 2s; sort the array in ascending
order.
Example 1:
Input:
N=5
arr[]= {0 2 1 2 0}
Output:
00122
Explanation:
0s 1s and 2s are segregated
into ascending order.
Given an array of size N containing only 0s, 1s, and 2s; sort the array in ascending
order.
Example 1:
Input:
N=5
arr[]= {0 2 1 2 0}

Output:
00122
Explanation:
0s 1s and 2s are segregated
into ascending order.
Expected Time Complexity: O(N)
Expected Auxiliary Space: O(1)
Constraints:
1 <= N <= 10^6
0 <= A[i] <= 2
Answer
Q5. Frequencies of Limited Range Array Elements
Given an array A[] of N positive integers which can contain integers from 1 to P where
elements can be repeated or can be absent from the array. Your task is to count the
frequency of all elements from 1 to N.
Note: The elements greater than N in the array can be ignored for counting and do
modify
the array in-place.
Example 1:
Input:
N=5
arr[] = {2, 3, 2, 3, 5}
P=5
Output:

02201
Explanation:
Counting frequencies of each array element
We have:
1 occurring 0 times.
2 occurring 2 times.
3 occurring 2 times.
4 occurring 0 times.
5 occurring 1 time.
Example 1:
Input:
N=5
arr[] = {2, 3, 2, 3, 5}
P=5
Output:
02201
Explanation:
Counting frequencies of each array element
We have:
1 occurring 0 times.
2 occurring 2 times.
3 occurring 2 times.
4 occurring 0 times.
5 occurring 1 time.

Example 2:
Input:
N=4
arr[] = {3,3,3,3}
P=3
Output:
0040
Explanation:
Counting frequencies of each array element
We have:
1 occurring 0 times.
2 occurring 0 times.
3 occurring 4 times.
4 occurring 0 times.
Your Task:
You don't need to read input or print anything. Complete the function frequencycount()
that
takes the array and n as input parameters and modify the array itself in place to denote
the
frequency count of each element from 1 to N. i,e element at index 0 should represent
the
frequency of 1, and so on.
Can you solve this problem without using extra space (O(1) Space)?
Constraints:
1 ≤ N ≤ 105
1 ≤ P ≤ 4*104
1 <= A[i] <= P
Answer

Q6. Remove duplicate elements from sorted Array

Given a sorted array A[] of size N, delete all the duplicated elements from A[]. Modify
the
array such that if there are X distinct elements in it then the first X positions of the array
should be filled with them in increasing order and return the number of distinct elements
in
the array.
Note:
1. Don't use set or HashMap to solve the problem.
2. You must return the number of distinct elements(X) in the array, the generated output
will print all the elements of the modified array from index 0 to X-1.
Example 1:
Input:
N=5
Array = {2, 2, 2, 2, 2}
Output: {2}
Explanation: After removing all the duplicates
only one instance of 2 will remain.
Example 2:
Input:
N=3
Array = {1, 2, 2}
Output: {1, 2}
Your Task:
You don't need to read input or print anything. Complete the function
remove_duplicate()
which takes the array A[] and its size N as input parameters and modifies it in place to
delete all the duplicates. The function must return an integer X denoting the new
modified
size of the array.
Expected Time Complexity: O(N)
Expected Auxiliary Space: O(1)
Constraints:
1 ≤ N ≤ 104
1 ≤ A[i] ≤ 106
Answer
Q7. Find the smallest and second smallest element in an array
Given an array of integers, your task is to find the smallest and second smallest element
in
the array. If smallest and second smallest do not exist, print -1.
Example 1:
Input :
5
24356
Output :
23
Explanation:
2 and 3 are respectively the smallest
and second smallest elements in the array.
Example 2:
Input :
6
121367
Output :
12
Explanation:
1 and 2 are respectively the smallest
and second smallest elements in the array.
Your Task:
You don't need to read input or print anything. Your task is to complete the function
minAnd2ndMin() which takes the array A[] and its size N as inputs and returns a vector
containing the smallest and second smallest element if possible, else return {-1,-1}.
Expected Time Complexity: O(N)
Expected Auxiliary Space: O(1)
Constraints:
1<=N<=105
1<=A[i]<=105
Answer
Q8. Binary number to decimal number
Given a Binary Number B, find its decimal equivalent.
Example 1:
Input: B = 10001000
Output: 136
Example 2:
Input: B = 101100
Output: 44
Your Task:
You don't need to read or print anything. Your task is to complete the function
binary_to_decimal() which takes the binary number as string input parameter and
returns
its decimal equivalent.
Expected Time Complexity: O(K * Log(K)) where K is number of bits in binary number.
Expected Space Complexity: O(1)
Constraints:
1 <= number of bits in binary number <= 16
Answer
Q9. Decimal to binary
Given a decimal number N, compute its binary equivalent.
Example 1:
Input: N = 7
Output: 111
Example 2:
Input: N = 33
Output: 100001
Your Task: You don't need to read input or print anything. Complete the function
toBinary()
which takes the decimal number N as the input parameter and prints its binary
equivalent.

Note: Print the output in a single line, the next line character is printed by the Driver
Code.
Answer
Q10. Searching a number
Given an array Arr of N elements and a integer K. Your task is to return the position of
first
occurence of K in the given array.
Note: Position of first element is considered as 1.
Example 1:
Input:
N = 5, K = 16
Arr[] = {9, 7, 2, 16, 4}
Output: 4
Explanation: K = 16 is found in the
given array at position 4.
Example 2:
Input:
N = 7, K = 98
Arr[] = {1, 22, 57, 47, 34, 18, 66}
Output: -1
Explanation: K = 98 isn't found in
the given array.
Your Task:

Complete the function search() which takes an array arr, two integers n and k, as input
parameters and returns an integer denoting the answer. Return -1 if the number is not
found in array. You don't to print answer or take inputs.
Expected Time Complexity: O(N)
Expected Auxiliary Space: O(1)
Constraints:
1 <= N <= 106
1 <= K <= 106
1 <= Arr[i] <= 106
Answer
Q11. Binary Search
Given a sorted array of size N and an integer K, find the position(0-based indexing) at
which
K is present in the array using binary search.
Example 1:
Input:
N=5
arr[] = {1 2 3 4 5}
K=4
Output: 3
Explanation: 4 appears at index 3.
Example 2:
Input:
N=5

arr[] = {11 22 33 44 55}

K = 445
Output: -1
Explanation: 445 is not present.
Your Task:
You dont need to read input or print anything. Complete the function binarysearch()
which
takes arr[], N and K as input parameters and returns the index of K in the array. If K is
not
present in the array, return -1.
Expected Time Complexity: O(LogN)
Expected Auxiliary Space: O(LogN) if solving recursively and O(1) otherwise.
Constraints:
1 <= N <= 105
1 <= arr[i] <= 106
1 <= K <= 106
Answer

LeetCode
Q1. 121. Best Time to Buy and Sell Stock
You are given an array prices where prices[i] is the price of a given stock on the ith day.
You want to maximize your profit by choosing a single day to buy one stock and
choosing a
different day in the future to sell that stock
Return the maximum profit you can achieve from this transaction. If you cannot achieve
any
profit, return @
Example 1:
Input: prices = [7,1,5,3,6,4]
Output: 5
Explanation: Buy on day 2 (price = 1) and sell on day 5 (price = 6), profit = 6-1 = 5.
Note that buying on day 2 and selling on day 1 is not allowed because you must buy
before
you sell.
Answer
Q2. 26. Remove Duplicates from Sorted Array
Given an integer array nuns sorted in non-decreasing order, remove the duplicates in-
place
such that each unique element appears only once. The relative order of the elements
should
be kept the same.
Since it is impossible to change the length of the array in some languages, you must
instead
have the result be placed in the first part of the array nums. More formally, if there are k
elements after removing the duplicates, then the first k elements of nums should hold
the
final result. It does not matter what you leave beyond the first k elements.
Return k after placing the final result in the first k slots of nums.
Do not allocate extra space for another array. You must do this by modifying the input
array
in-place with O(1) extra memory.
Custom Judge:
The judge will test your solution with the following code:
int[] nums = [...]; // Input array
int[] expectedNums = [...]; // The expected answer with correct
Length
Answer
Q3. 1480. Running Sum of 1d Array
Given an array nums. We define a running sum of an array as runningSum[i] =
um[nums[@]...nums[1]).
Return the running sum of nums.
Example 1:
Input: nums = [1,2,3,4]
Output: 1,3,6,10]
Explanation: Running sum is obtained as follows: [1, 1+2, 1+2+3, 1+2+3+4] .
Example 2:
Input: nums = [1,1,1,1,1]
Output: 11,2,3,4,5]
Explanation: Running sum is obtained as follows: 11, 1+1, 1+1+1, 1+1+1+1,
1+1+1+1+1].
Answer

Q4. 88. Merge Sorted Array

You are given two integer arrays nums1 and nums2, sorted in non-decreasing order,
and
two integers m and n, representing the number of elements in nums1 and nums2
respectively.
Merge nums1 and nums2 into a single array sorted in non-decreasing order.
The final sorted array should not be returned by the function, but instead be stored
inside
the array nums1. To accommodate this, nums1 has a length of m + n, where the first m
elements denote the elements that should be merged, and the last n elements are set to
0
and should be ignored. nums2 has a length of n.
Example 1:
Input: nums1 = [1,2,3,0,0,0], m = 3, nums2 = [2,5,6], n = 3
Output: [1,2,2,3,5,6]
Explanation: The arrays we are merging are [1,2,3] and [2,5,6].
The result of the merge is [1,2,2,3,5,6] with the underlined elements coming from
nums1.
Example 2:
Input: nums1 = [1], m = 1, nums2 = [], n = 0
Output: [1]
Explanation: The arrays we are merging are [1] and [].
The result of the merge is [1].
Example 3:
Input: nums1 = [0], m = 0, nums2 = [1], n = 1
Output: [1]

Explanation: The arrays we are merging are [] and [1].

The result of the merge is [1].
Note that because m = 0, there are no elements in nums1. The 0 is only there to ensure
the
merge result can fit in nums1.
Answer
Q5. 977. Squares of a Sorted Array
Given an integer array nums sorted in non-decreasing order, return an array of the
squares
of each number sorted in non-decreasing order.
Example 1:
Input: nums = [-4,-1,0,3,10]
Output: [0,1,9,16,100]
Explanation: After squaring, the array becomes [16,1,0,9,100].
After sorting, it becomes [0,1,9,16,100].
Example 2:
Input: nums = [-7,-3,2,3,11]
Output: [4,9,9,49,121]
Answer
Q6. 509. Fibonacci Number
The Fibonacci numbers, commonly denoted F(n) form a sequence, called the Fibonacci
sequence, such that each number is the sum of the two preceding ones, starting from 0
and
1. That is,

F(0) = 0, F(1) = 1
F(n) = F(n - 1) + F(n - 2), for n
> 1.
Given n, calculate F(n).
Example 1:
Input: n = 2
Output: 1
Explanation: F(2) = F(1) + F(0) = 1 + 0 = 1.
Example 2:
Input: n = 3
Output: 2
Explanation: F(3) = F(2) + F(1) = 1 + 1 = 2.
Example 3:
Input: n = 4
Output: 3
Explanation: F(4) = F(3) + F(2) = 2 + 1 = 3.
Answer

Q7. 41. First Missing Positive

Given an unsorted integer array nums, return the smallest missing positive integer.
You must implement an algorithm that runs in O(n) time and uses constant extra space.
Example 1:
Input: nums = [1,2,0]
Output: 3
Explanation: The numbers in the range [1,2] are all in the array.
Example 2:
Input: nums = [3,4,-1,1]
Output: 2
Explanation: 1 is in the array but 2 is missing.
Example 3:
Input: nums = [7,8,9,11,12]
Output: 1
Explanation: The smallest positive integer 1 is missing.
Answer
Q8. 1. Two Sum
Given an array of integers nums and an integer target, return indices of the two
numbers
such that they add up to target.

You may assume that each input would have exactly one solution, and you may not use
the
same element twice.
You can return the answer in any order.
Example 1:
Input: nums = [2,7,11,15], target = 9
Output: [0,1]
Explanation: Because nums[0] + nums[1] == 9, we return [0, 1].
Example 2:
Input: nums = [3,2,4], target = 6
Output: [1,2]
Example 3:
Input: nums = [3,3], target = 6
Output: [0,1]
Answer
Q9. 169. Majority Element

The majority element is the element that appears more than ⌊n / 2⌋ times. You may
Given an array nums of size n, return the majority element.
assume
that the majority element always exists in the array.

Example 1:
Input: nums = [3,2,3]
Output: 3
Example 2:
Input: nums = [2,2,1,1,1,2,2]
Output: 2
Answer
Q10. 118. Pascal's Triangle
Given an integer numRows, return the first numRows of Pascal's triangle.
In Pascal's triangle, each number is the sum of the two numbers directly above it as

shown:
Example 1:
Input: numRows = 5
Output: [[1],[1,1],[1,2,1],[1,3,3,1],[1,4,6,4,1]]
Example 2:
Input: numRows = 1
Output: [[1]]
Answer

Q11. 724. Find Pivot Index

Given an array of integers nums, calculate the pivot index of this array.
The pivot index is the index where the sum of all the numbers strictly to the left of the
index
is equal to the sum of all the numbers strictly to the index's right.
If the index is on the left edge of the array, then the left sum is 0 because there are no
elements to the left. This also applies to the right edge of the array.
Return the leftmost pivot index. If no such index exists, return -1.
Example 1:
Input: nums = [1,7,3,6,5,6]
Output: 3
Explanation:
The pivot index is 3.
Left sum = nums[0] + nums[1] + nums[2] = 1 + 7 + 3 = 11
Right sum = nums[4] + nums[5] = 5 + 6 = 11
Example 2:
Input: nums = [1,2,3]
Output: -1
Explanation:
There is no index that satisfies the conditions in the problem statement.
Example 3:

Q13. 125. Valid Palindrome

A phrase is a palindrome if, after converting all uppercase letters into lowercase letters
and
removing all non-alphanumeric characters, it reads the same forward and backward.
Alphanumeric characters include letters and numbers.
Given a string s, return true if it is a palindrome, or false otherwise.
Example 1:
Input: s = "A man, a plan, a canal: Panama"
Output: true
Explanation: "amanaplanacanalpanama" is a palindrome.
Example 2:
Input: s = "race a car"
Output: false
Explanation: "raceacar" is not a palindrome.
Example 3:
Input: s = " "
Output: true
Explanation: s is an empty string "" after removing non-alphanumeric characters.
Since an empty string reads the same forward and backward, it is a palindrome.
Answer

Q14. 1010. Pairs of Songs With Total Durations Divisible by 60

You are given a list of songs where the ith song has a duration of time[i] seconds.
Return the number of pairs of songs for which their total duration in seconds is divisible
by
60. Formally, we want the number of indices i, j such that i < j with (time[i] + time[j]) %
60 ==
0.
Example 1:
Input: time = [30,20,150,100,40]
Output: 3
Explanation: Three pairs have a total duration divisible by 60:
(time[0] = 30, time[2] = 150): total duration 180
(time[1] = 20, time[3] = 100): total duration 120
(time[1] = 20, time[4] = 40): total duration 60
Example 2:
Input: time = [60,60,60]
Output: 3
Explanation: All three pairs have a total duration of 120, which is divisible by 60.
Answer
Q15. 238. Product of Array Except Self
Given an integer array nums, return an array answer such that answer[i] is equal to the
product of all the elements of nums except nums[i].

The product of any prefix or suffix of nums is guaranteed to fit in a 32-bit integer.
You must write an algorithm that runs in O(n) time and without using the division
operation.
Example 1:
Input: nums = [1,2,3,4]
Output: [24,12,8,6]
Example 2:
Input: nums = [-1,1,0,-3,3]
Output: [0,0,9,0,0]
Answer
Q16. 1465. Maximum Area of a Piece of Cake After Horizontal and Vertical Cuts
You are given a rectangular cake of size h x w and two arrays of integers horizontalCuts
and
verticalCuts where:
horizontalCuts[i] is the distance from the top of the rectangular cake to the ith horizontal
cut and similarly, and
verticalCuts[j] is the distance from the left of the rectangular cake to the jth vertical cut.
Return the maximum area of a piece of cake after you cut at each horizontal and
vertical
position provided in the arrays horizontalCuts and verticalCuts. Since the answer can be
a
large number, return this modulo 109 + 7.
Output: 6
Explanation: The figure above represents the given rectangular cake. Red lines are the
horizontal and vertical cuts. After you cut the cake, the green and yellow pieces of cake
have
the maximum area.
Example 3:
Input: h = 5, w = 4, horizontalCuts = [3], verticalCuts = [3]
Output: 9
Answer
Q17. 2545. Sort the Students by Their Kth Score
There is a class with m students and n exams. You are given a 0-indexed m x n integer
matrix
score, where each row represents one student and score[i][j] denotes the score the ith
student got in the jth exam. The matrix score contains distinct integers only.
You are also given an integer k. Sort the students (i.e., the rows of the matrix) by their
scores in the kth (0-indexed) exam from the highest to the lowest.
Return the matrix after sorting it.

Input: score = [[10,6,9,1],[7,5,11,2],[4,8,3,15]], k = 2

Output: [[7,5,11,2],[10,6,9,1],[4,8,3,15]]
Explanation: In the above diagram, S denotes the student, while E denotes the exam.
- The student with index 1 scored 11 in exam 2, which is the highest score, so they got
first
place.
- The student with index 0 scored 9 in exam 2, which is the second highest score, so
they got
second place.
- The student with index 2 scored 3 in exam 2, which is the lowest score, so they got
third
place.

Example 2:
Input: score = [[3,4],[5,6]], k = 0
Output: [[5,6],[3,4]]
Explanation: In the above diagram, S denotes the student, while E denotes the exam.
- The student with index 1 scored 5 in exam 0, which is the highest score, so they got
first
place.
- The student with index 0 scored 3 in exam 0, which is the lowest score, so they got
second
place.
Answer
Q18. 1380. Lucky Numbers in a Matrix
Given an m x n matrix of distinct numbers, return all lucky numbers in the matrix in any
order.
A lucky number is an element of the matrix such that it is the minimum element in its
row
and maximum in its column.
Example 1:
Input: matrix = [[3,7,8],[9,11,13],[15,16,17]]
Output: [15]
Explanation: 15 is the only lucky number since it is the minimum in its row and the
maximum in its column.

Example 2:
Input: matrix = [[1,10,4,2],[9,3,8,7],[15,16,17,12]]
Output: [12]
Explanation: 12 is the only lucky number since it is the minimum in its row and the
maximum in its column.
Example 3:
Input: matrix = [[7,8],[1,2]]
Output: [7]
Explanation: 7 is the only lucky number since it is the minimum in its row and the
maximum
in its column.
Answer
Q19. 380. Insert Delete GetRandom O(1)
Implement the RandomizedSet class:
• RandomizedSet() Initializes the RandomizedSet object.
• bool insert(int val) Inserts an item val into the set if not present. Returns true if the
item was not present, false otherwise.
• bool remove(int val) Removes an item val from the set if present. Returns true if the
item was present, false otherwise.
• int getRandom() Returns a random element from the current set of elements (it's
guaranteed that at least one element exists when this method is called). Each
element must have the same probability of being returned.
You must implement the functions of the class such that each function works in average
O(1) time complexity.

Example 1:
Input
["RandomizedSet", "insert", "remove", "insert", "getRandom", "remove", "insert",
"getRandom"]
[[], [1], [2], [2], [], [1], [2], []]
Output
[null, true, false, true, 2, true, false, 2]
Explanation
RandomizedSet randomizedSet = new RandomizedSet();
randomizedSet.insert(1); // Inserts 1 to the set. Returns true as 1 was inserted
successfully.
randomizedSet.remove(2); // Returns false as 2 does not exist in the set.
randomizedSet.insert(2); // Inserts 2 to the set, returns true. Set now contains [1,2].
randomizedSet.getRandom(); // getRandom() should return either 1 or 2 randomly.
randomizedSet.remove(1); // Removes 1 from the set, returns true. Set now contains
[2].
randomizedSet.insert(2); // 2 was already in the set, so return false.
randomizedSet.getRandom(); // Since 2 is the only number in the set, getRandom() will
always return 2.
Answer
Q20. 1876. Substrings of Size Three with Distinct Characters
A string is good if there are no repeated characters.
Given a string s, return the number of good substrings of length three in s.

Note that if there are multiple occurrences of the same substring, every occurrence
should
be counted.
A substring is a contiguous sequence of characters in a string.
Example 1:
Input: s = "xyzzaz"
Output: 1
Explanation: There are 4 substrings of size 3: "xyz", "yzz", "zza", and "zaz".
The only good substring of length 3 is "xyz".
Example 2:
Input: s = "aababcabc"
Output: 4
Explanation: There are 7 substrings of size 3: "aab", "aba", "bab", "abc", "bca", "cab",
and
"abc".
The good substrings are "abc", "bca", "cab", and "abc".
Answer
Q21. 763. Partition Labels
You are given a string s. We want to partition the string into as many parts as possible
so
that each letter appears in at most one part.
Note that the partition is done so that after concatenating all the parts in order, the
resultant string should be s.
Return a list of integers representing the size of these parts.

Example 1:
Input: s = "ababcbacadefegdehijhklij"
Output: [9,7,8]
Explanation:
The partition is "ababcbaca", "defegde", "hijhklij".
This is a partition so that each letter appears in at most one part.
A partition like "ababcbacadefegde", "hijhklij" is incorrect, because it splits s into less
parts.
Example 2:
Input: s = "eccbbbbdec"
Output: [10]
Answer
Q22. 2161. Partition Array According to Given Pivot
You are given a 0-indexed integer array nums and an integer pivot. Rearrange nums
such
that the following conditions are satisfied:
• Every element less than pivot appears before every element greater than pivot.
• Every element equal to pivot appears in between the elements less than and greater
than pivot.
• The relative order of the elements less than pivot and the elements greater than
pivot is maintained.
• More formally, consider every pi, pj where pi is the new position of the ith element
and pj is the new position of the jth element. For elements less than pivot, if i < j and
nums[i] < pivot and nums[j] < pivot, then pi < pj. Similarly for elements greater than
pivot, if i < j and nums[i] > pivot and nums[j] > pivot, then pi < pj.
Return nums after the rearrangement.
Example 1:
Input: nums = [9,12,5,10,14,3,10], pivot = 10
Output: [9,5,3,10,10,12,14]
Explanation:
The elements 9, 5, and 3 are less than the pivot so they are on the left side of the array.
The elements 12 and 14 are greater than the pivot so they are on the right side of the
array.
The relative ordering of the elements less than and greater than pivot is also
maintained. [9,
5, 3] and [12, 14] are the respective orderings.
Example 2:
Input: nums = [-3,4,3,2], pivot = 2
Output: [-3,2,4,3]
Explanation:
The element -3 is less than the pivot so it is on the left side of the array.
The elements 4 and 3 are greater than the pivot so they are on the right side of the
array.
The relative ordering of the elements less than and greater than pivot is also
maintained. [-
3] and [4, 3] are the respective orderings.
Answer
Q23. 2442. Count Number of Distinct Integers After Reverse Operations
You are given an array nums consisting of positive integers.
You have to take each integer in the array, reverse its digits, and add it to the end of the
array. You should apply this operation to the original integers in nums.

vReturn the number of distinct integers in the final array.

Example 1:
Input: nums = [1,13,10,12,31]
Output: 6
Explanation: After including the reverse of each number, the resulting array is
[1,13,10,12,31,1,31,1,21,13].
The reversed integers that were added to the end of the array are underlined. Note that
for
the integer 10, after reversing it, it becomes 01 which is just 1.
The number of distinct integers in this array is 6 (The numbers 1, 10, 12, 13, 21, and
31).
Example 2:
Input: nums = [2,2,2]
Output: 1
Explanation: After including the reverse of each number, the resulting array is
[2,2,2,2,2,2].
The number of distinct integers in this array is 1 (The number 2).
Answer
Q24. 933. Number of Recent Calls
You have a RecentCounter class which counts the number of recent requests within a
certain time frame.
Implement the RecentCounter class:
• RecentCounter() Initializes the counter with zero recent requests.
• int ping(int t) Adds a new request at time t, where t represents some time in
milliseconds, and returns the number of requests that has happened in the past

3000 milliseconds (including the new request). Specifically, return the number of
requests that have happened in the inclusive range [t - 3000, t].
It is guaranteed that every call to ping uses a strictly larger value of t than the previous
call.
Example 1:
Input
["RecentCounter", "ping", "ping", "ping", "ping"]
[[], [1], [100], [3001], [3002]]
Output
[null, 1, 2, 3, 3]
Explanation
RecentCounter recentCounter = new RecentCounter();
recentCounter.ping(1); // requests = [1], range is [-2999,1], return 1
recentCounter.ping(100); // requests = [1, 100], range is [-2900,100], return 2
recentCounter.ping(3001); // requests = [1, 100, 3001], range is [1,3001], return 3
recentCounter.ping(3002); // requests = [1, 100, 3001, 3002], range is [2,3002], return 3
Answer
Q25. 2428. Maximum Sum of an Hourglass
You are given an m x n integer matrix grid.
We define an hourglass as a part of the matrix with the following form:

Return the maximum sum of the elements of an hourglass.

Note that an hourglass cannot be rotated and must be entirely contained within the
matrix.
Example 1:
Input: grid = [[6,2,1,3],[4,2,1,5],[9,2,8,7],[4,1,2,9]]
Output: 30
Explanation: The cells shown above represent the hourglass with the maximum sum: 6
+2+
1 + 2 + 9 + 2 + 8 = 30.
Example 2:
Input: grid = [[1,2,3],[4,5,6],[7,8,9]]
Output: 35
Explanation: There is only one hourglass in the matrix, with the sum: 1 + 2 + 3 + 5 + 7 +
8+9
= 35.
Answer
Q26. 419. Battleships in a Board
iven an m x n matrix board where each cell is a battleship 'X' or empty '.', return the
number
of the battleships on board.

Battleships can only be placed horizontally or vertically on board. In other words, they
can
only be made of the shape 1 x k (1 row, k columns) or k x 1 (k rows, 1 column), where k
can
be of any size. At least one horizontal or vertical cell separates between two battleships
(i.e.,
there are no adjacent battleships).
Example 1:
Input: board = [["X",".",".","X"],[".",".",".","X"],[".",".",".","X"]]
Output: 2
Example 2:
Input: board = [["."]]
Output: 0
Answer
Q27. 1381. Design a Stack With Increment Operation
Design a stack that supports increment operations on its elements.
Implement the CustomStack class:
• CustomStack(int maxSize) Initializes the object with maxSize which is the maximum
number of elements in the stack.
• void push(int x) Adds x to the top of the stack if the stack has not reached the
maxSize.
• int pop() Pops and returns the top of the stack or -1 if the stack is empty.
• void inc(int k, int val) Increments the bottom k elements of the stack by val. If there
are less than k elements in the stack, increment all the elements in the stack.
Example 1:
Input
["CustomStack","push","push","pop","push","push","push","increment","increment","pop"
,
"pop","pop","pop"]
[[3],[1],[2],[],[2],[3],[4],[5,100],[2,100],[],[],[],[]]
Output
[null,null,null,2,null,null,null,null,null,103,202,201,-1]
Explanation
CustomStack stk = new CustomStack(3); // Stack is Empty []
stk.push(1); // stack becomes [1]
stk.push(2); // stack becomes [1, 2]
stk.pop(); // return 2 --> Return top of the stack 2, stack becomes [1]
stk.push(2); // stack becomes [1, 2]
stk.push(3); // stack becomes [1, 2, 3]
stk.push(4); // stack still [1, 2, 3], Do not add another elements as size is 4
stk.increment(5, 100); // stack becomes [101, 102, 103]
stk.increment(2, 100); // stack becomes [201, 202, 103]
stk.pop(); // return 103 --> Return top of the stack 103, stack becomes [201,
202]
stk.pop(); // return 202 --> Return top of the stack 202, stack becomes [201]
stk.pop(); // return 201 --> Return top of the stack 201, stack becomes []
stk.pop(); // return -1 --> Stack is empty return -1.
Answer

Q28. 442. Find All Duplicates in an Array

Given an integer array nums of length n where all the integers of nums are in the range
[1,
n] and each integer appears once or twice, return an array of all the integers that
appears
twice.
You must write an algorithm that runs in O(n) time and uses only constant extra space.
Example 1:
Input: nums = [4,3,2,7,8,2,3,1]
Output: [2,3]
Example 2:
Input: nums = [1,1,2]
Output: [1]
Example 3:
Input: nums = [1]
Output: []
Answer
Q29. 2405. Optimal Partition of String
Given a string s, partition the string into one or more substrings such that the characters
in
each substring are unique. That is, no letter appears in a single substring more than
once.
Return the minimum number of substrings in such a partition.
Note that each character should belong to exactly one substring in a partition.
Example 1:
Input: s = "abacaba"
Output: 4
Explanation:
Two possible partitions are ("a","ba","cab","a") and ("ab","a","ca","ba").
It can be shown that 4 is the minimum number of substrings needed.
Example 2:
Input: s = "ssssss"
Output: 6
Explanation:
The only valid partition is ("s","s","s","s","s","s").
Answer
Q30. 1780. Check if Number is a Sum of Powers of Three
Given an integer n, return true if it is possible to represent n as the sum of distinct
powers of
three. Otherwise, return false.
An integer y is a power of three if there exists an integer x such that y == 3x.

Example 1:
Input: n = 12
Output: true
Explanation: 12 = 31 + 32
Example 2:
Input: n = 91
Output: true
Explanation: 91 = 30 + 32 + 34
Example 3:
Input: n = 21
Output: false
Answer
Q31. 2186. Minimum Number of Steps to Make Two Strings Anagram II
You are given two strings s and t. In one step, you can append any character to either s
or t.
Return the minimum number of steps to make s and t anagrams of each other.
An anagram of a string is a string that contains the same characters with a different (or
the
same) ordering.
Example 1:

Input: s = "leetcode", t = "coats"

Output: 7
Explanation:
- In 2 steps, we can append the letters in "as" onto s = "leetcode", forming s =
"leetcodeas".
- In 5 steps, we can append the letters in "leede" onto t = "coats", forming t =
"coatsleede".
"leetcodeas" and "coatsleede" are now anagrams of each other.
We used a total of 2 + 5 = 7 steps.
It can be shown that there is no way to make them anagrams of each other with less
than 7
steps.
Example 2:
Input: s = "night", t = "thing"
Output: 0
Explanation: The given strings are already anagrams of each other. Thus, we do not
need
any further steps.
Answer
Q32. 2317. Maximum XOR After Operations
You are given a 0-indexed integer array nums. In one operation, select any non-
negative
integer x and an index i, then update nums[i] to be equal to nums[i] AND (nums[i] XOR
x).
Note that AND is the bitwise AND operation and XOR is the bitwise XOR operation.
Return the maximum possible bitwise XOR of all elements of nums after applying the
operation any number of times.
Example 1:

Input: nums = [3,2,4,6]

Output: 7
Explanation: Apply the operation with x = 4 and i = 3, num[3] = 6 AND (6 XOR 4) = 6
AND 2 =
2.
Now, nums = [3, 2, 4, 2] and the bitwise XOR of all the elements = 3 XOR 2 XOR 4
XOR 2 = 7.
It can be shown that 7 is the maximum possible bitwise XOR.
Note that other operations may be used to achieve a bitwise XOR of 7.
Example 2:
Input: nums = [1,2,3,9,2]
Output: 11
Explanation: Apply the operation zero times.
The bitwise XOR of all the elements = 1 XOR 2 XOR 3 XOR 9 XOR 2 = 11.
It can be shown that 11 is the maximum possible bitwise XOR.
Answer
Q33. 1806. Minimum Number of Operations to Reinitialize a Permutation
You are given an even integer n. You initially have a permutation perm of size n where
perm[i] == i (0-indexed).
In one operation, you will create a new array arr, and for each i:
• If i % 2 == 0, then arr[i] = perm[i / 2].
• If i % 2 == 1, then arr[i] = perm[n / 2 + (i - 1) / 2].
You will then assign arr to perm
Return the minimum non-zero number of operations you need to perform on perm to
return the permutation to its initial value.
Example 1:
Input: n = 2
Output: 1
Explanation: perm = [0,1] initially.
After the 1st operation, perm = [0,1]
So it takes only 1 operation.
Example 2:
Input: n = 4
Output: 2
Explanation: perm = [0,1,2,3] initially.
After the 1st operation, perm = [0,2,1,3]
After the 2nd operation, perm = [0,1,2,3]
So it takes only 2 operations.
Example 3:
Input: n = 6
Output: 4
Answer

Q34. 1630. Arithmetic Subarrays

A sequence of numbers is called arithmetic if it consists of at least two elements, and
the
difference between every two consecutive elements is the same. More formally, a
sequence
s is arithmetic if and only if s[i+1] - s[i] == s[1] - s[0] for all valid i.
For example, these are arithmetic sequences:
1, 3, 5, 7, 9
7, 7, 7, 7
3, -1, -5, -9
The following sequence is not arithmetic:
1, 1, 2, 5, 7
You are given an array of n integers, nums, and two arrays of m integers each, l and r,
representing the m range queries, where the ith query is the range [l[i], r[i]]. All the
arrays
are 0-indexed.
Return a list of boolean elements answer, where answer[i] is true if the subarray
nums[l[i]],
nums[l[i]+1], ... , nums[r[i]] can be rearranged to form an arithmetic sequence, and false
otherwise.
Example 1:
Input: nums = [4,6,5,9,3,7], l = [0,0,2], r = [2,3,5]
Output: [true,false,true]
Explanation:
In the 0th query, the subarray is [4,6,5]. This can be rearranged as [6,5,4], which is an
arithmetic sequence.
In the 1st query, the subarray is [4,6,5,9]. This cannot be rearranged as an arithmetic
sequence.

In the 2nd query, the subarray is [5,9,3,7]. This can be rearranged as [3,5,7,9], which is
an
arithmetic sequence.
Example 2:
Input: nums = [-12,-9,-3,-12,-6,15,20,-25,-20,-15,-10], l = [0,1,6,4,8,7], r = [4,4,9,7,9,10]
Output: [false,true,false,false,true,true]
Answer
Q35. 941. Valid Mountain Array
Given an array of integers arr, return true if and only if it is a valid mountain array.
Recall that arr is a mountain array if and only if:
• arr.length >= 3
• There exists some i with 0 < i < arr.length - 1 such that:
• arr[0] < arr[1] < ... < arr[i - 1] < arr[i]
• arr[i] > arr[i + 1] > ... > arr[arr.length - 1]

Example 1:
Input: arr = [2,1]
Output: false
Example 2:
Input: arr = [3,5,5]
Output: false
Example 3:
Input: arr = [0,3,2,1]
Output: true
Answer
Q36. 704. Binary Search
Given an array of integers nums which is sorted in ascending order, and an integer
target,
write a function to search target in nums. If target exists, then return its index.
Otherwise,
return -1.
You must write an algorithm with O(log n) runtime complexity.
Example 1:
Input: nums = [-1,0,3,5,9,12], target = 9
Output: 4
Explanation: 9 exists in nums and its index is 4
Example 2:
Input: nums = [-1,0,3,5,9,12], target = 2
Output: -1
Explanation: 2 does not exist in nums so return -1
Answer

Q37. 2043. Simple Bank System

You have been tasked with writing a program for a popular bank that will automate all its
incoming transactions (transfer, deposit, and withdraw). The bank has n accounts
numbered
from 1 to n. The initial balance of each account is stored in a 0-indexed integer array
balance, with the (i + 1)th account having an initial balance of balance[i].
Execute all the valid transactions. A transaction is valid if:
• The given account number(s) are between 1 and n, and
• The amount of money withdrawn or transferred from is less than or equal to the
balance of the account.
Implement the Bank class:
• Bank(long[] balance) Initializes the object with the 0-indexed integer array balance.
• boolean transfer(int account1, int account2, long money) Transfers money dollars
from the account numbered account1 to the account numbered account2. Return
true if the transaction was successful, false otherwise.
• boolean deposit(int account, long money) Deposit money dollars into the account
numbered account. Return true if the transaction was successful, false otherwise.
• boolean withdraw(int account, long money) Withdraw money dollars from the
account numbered account. Return true if the transaction was successful, false
otherwise
Example 1:
Input
["Bank", "withdraw", "transfer", "deposit", "transfer", "withdraw"]
[[[10, 100, 20, 50, 30]], [3, 10], [5, 1, 20], [5, 20], [3, 4, 15], [10, 50]]
Output
[null, true, true, true, false, false]
Explanation
Bank bank = new Bank([10, 100, 20, 50, 30]);

bank.withdraw(3, 10); // return true, account 3 has a balance of $20, so it is valid to

withdraw $10.
// Account 3 has $20 - $10 = $10.
bank.transfer(5, 1, 20); // return true, account 5 has a balance of $30, so it is valid to
transfer $20.
// Account 5 has $30 - $20 = $10, and account 1 has $10 + $20 = $30.
bank.deposit(5, 20); // return true, it is valid to deposit $20 to account 5.
// Account 5 has $10 + $20 = $30.
bank.transfer(3, 4, 15); // return false, the current balance of account 3 is $10,
// so it is invalid to transfer $15 from it.
bank.withdraw(10, 50); // return false, it is invalid because account 10 does not exist.
Answer
Q38. 451. Sort Characters By Frequency
Given a string s, sort it in decreasing order based on the frequency of the characters.
The
frequency of a character is the number of times it appears in the string.
Return the sorted string. If there are multiple answers, return any of them.
Example 1:
Input: s = "tree"
Output: "eert"
Explanation: 'e' appears twice while 'r' and 't' both appear once.
So 'e' must appear before both 'r' and 't'. Therefore "eetr" is also a valid answer.
Example 2:

Input: s = "cccaaa"
Output: "aaaccc"
Explanation: Both 'c' and 'a' appear three times, so both "cccaaa" and "aaaccc" are valid
answers.
Note that "cacaca" is incorrect, as the same characters must be together.
Example 3:
Input: s = "Aabb"
Output: "bbAa"
Explanation: "bbaA" is also a valid answer, but "Aabb" is incorrect.
Note that 'A' and 'a' are treated as two different characters.
Answer