03/02/2025, 12:20 How-to Flash or Install .

pac Firmware (ROM) using SPD Upgrade Tool

Search

Home Upgrade Tool Research Tool Factory Tool

How to use SPD Upgrade Tool

On this page, we are going to use the SPD Upgrade Tool to Flash or install the Stock Firmware
(ROM Flash File) on devices powered by Spreadtrum/Unisoc Chipset.

Caution: Flashing or installing stock Firmware using the SPD Upgrade Tool may wipe out
the personal data from the device. Therefore, we recommend you to take a backup of
your data before using the SPD Upgrade Tool.

How to Install PAC Firmware (ROM) using the SPD Upgrade Tool

1 Download and install the SPD Driver on your Computer (if in case SPD Drivers are
already installed on the computer, then SKIP this step).

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 1/8
03/02/2025, 12:20 How-to Flash or Install .pac Firmware (ROM) using SPD Upgrade Tool

2 Download Stock Firmware (ROM Flash File) of your Spreadtrum/Unisoc Device (if in case
you have already downloaded the Stock Firmware then SKIP this step of find the .pac
based Stock Firmware on FirmwareFile or NaijaROM or through Google).

3 Extract the SPD Upgrade Tool on your computer (assuming you have already
downloaded the Upgrade Tool; if not then Download SPD Upgrade Tool). Once Upgrade
Tool is extracted on the computer, you will be able to see the following files:

4 Now, Open UpgradeDownload.exe to launch the Tool:

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 2/8
03/02/2025, 12:20 How-to Flash or Install .pac Firmware (ROM) using SPD Upgrade Tool

5 Once Upgrade Tool is Launched, you will be able to see the following window:

6 Click on the Load Packet Button:

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 3/8
03/02/2025, 12:20 How-to Flash or Install .pac Firmware (ROM) using SPD Upgrade Tool

7 Locate the .pac based Stock Firmware (ROM Flash File) on your Computer (assuming
you have already downloaded the Stock Firmware in Step#2) and Click on Open to Load
the Firmware:

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 4/8
03/02/2025, 12:20 How-to Flash or Install .pac Firmware (ROM) using SPD Upgrade Tool

8 Connect your Spreadtrum/Unisoc Device to the Computer using the USB Cable (make
sure the device is Power Off):

9 Click on Start Downloading button to begin the Flashing or installation process:

10 Now, Upgrade Tool may take few minutes to complete the Flashing or installation
process:

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 5/8
03/02/2025, 12:20 How-to Flash or Install .pac Firmware (ROM) using SPD Upgrade Tool

11 Once the Flashing or installation process is completed, you will be able to see the Passed
Message on the Upgrade Tool:

12 Now, Close Upgrade Tool and Disconnect your Spreadtrum/Unisoc device from the
Computer.

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 6/8
03/02/2025, 12:20 How-to Flash or Install .pac Firmware (ROM) using SPD Upgrade Tool

Congratulation! You just learned to flash or install .pac firmware on Spreadtrum/Unisoc

Readme Once:

[*] Download Upgrade Tool: If you are looking for the latest version of SPD Upgrade
Tool, then head over to the Upgrade Tool Section page.

[*] Download Latest version of SPD Research Tool: If you are looking for the latest
version of SPD Research Tool, then head over to the Research Tool Section page.

[*] Download Latest version of SPD Factory Tool: If you are looking for the latest
version of SPD Factory Tool, then head over to the Factory Tool Section page.

[*] Download SPD/Unisoc Driver: If you are looking for SPD/Unisoc USB Driver
compatible with the SPD Flash Tool, then head over to Download SPD USB Driver page.

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 7/8
03/02/2025, 12:20 How-to Flash or Install .pac Firmware (ROM) using SPD Upgrade Tool

Site Links

Upgrade Tool

Research Tool

Privacy Policy

Useful

How-to Use

Source Code

SPD Driver

Connect

spdflashtool.com is not affiliated or endorsed by Unisoc Communications | Hosted on Hostinger,

https://spdflashtool.com/tutorial/use-spd-upgrade-tool 8/8