Development of Dynamic Models

Illustrative Example: A Blending Process

Chapter 2

↑
↑

An unsteady-state mass balance for the blending system:

rate of accumulation   rate of   rate of 

 = −  (2-1)
 of mass in the tank   mass in   mass out 
1
 59 : -3 % m : Cmsys (

i = YV

%-You E
:

[iCt)
- YouLt) G
=

V = Ah
Cylinder

F
=
= Assume
-fut =Ques linear relationship
-

[ :

(E] [m]
A = -q
Eq3 in Eq
>
- h State variable Courput]

D h
A +
qct) =

g
, % ·
foot 3 variables

non homo
git
Ad
=

3 -

1 =
2 ~ Ist ODE
↓
E
equation factor
Disturbance forcing
n = f (g <2007
fi(t) nht
> Alth =

->
q(t)dh(t) -

Dof = 3 -2 = 1 =

= [m] = (n]

= T - time constant

speed of the
responce
of the
system
[ = measure. of the
response (hCH)
 tank ↑E ↓A
Bigger

Thi
> slower
-
responce

Ti final

E
= Step
gi ?

A sin

At steady state conditions

+ n
= -
=
a+ 9 1 h
B =
=

j+

- -

Ti
30

IMark
+ h =
0

Enth = , 4 r+ 1 = 0 r= - 1

+ h = 70
homc n

B = 7)

+
h = ce + 70

30 = c+ 70 = -

40

+
h =
40e + 70
 Summary
q = ah

↓ outpariable
[A] = A [
:
+ n

X
Disturbances

at steady
state =
DOF = 1 Specify [ : (t)

Ex :
let
gi(t)
=-
M is constant

- + h
= M

Gnomo :
[r + 1 =
0

r
=
Knomo =
ce't

h() =
4e
+
+
kym
2 = 1

= h = Som initial
3 5
.

M = 70

M =
[,
= 70
Final s .S
-
- =
50

h : ce * + 70 General solution
It- faster response
*

70
h(0) : 50 = 6 + G
= -

20 Ero

n(t) =
70 -

20 et/ parameter [

· T

choose values for E at Different times - Draw figure .

 git R
likeom's law 1
= = Resistance
to flow

[*
=
E
 muss system
or -

d (Vρ )
= w1 + w2 − w (2-2)
dt
where w1, w2, and w are mass flow rates.

The unsteady-state component balance is:

Chapter 2

d (Vρx )
= w1x1 + w2 x2 − wx (2-3)
dt

The corresponding steady-state model was derived in Ch. 1 (cf.

Eqs. 1-1 and 1-2).
0 = w1 + w2 − w (2-4)
0 = w1 x1 + w2 x2 − wx (2-5)
for

constants g With w

Continu
in
slide 10

I LUx/dE = WiX + WiXz-wX - 2

 General Modeling Principles
• The model equations are at best an approximation to the real
process.
• Adage: “All models are wrong, but some are useful.”
• Modeling inherently involves a compromise between model
Chapter 2

accuracy and complexity on one hand, and the cost and effort
required to develop the model, on the other hand.
• Process modeling is both an art and a science. Creativity is
required to make simplifying assumptions that result in an
appropriate model.
• Dynamic models of chemical processes consist of ordinary
differential equations (ODE) and/or partial differential equations
(PDE), plus related algebraic equations.

3
 Table 2.1. A Systematic Approach for
Developing Dynamic Models
1. State the modeling objectives and the end use of the model.
They determine the required levels of model detail and model
accuracy.
Chapter 2

2. Draw a schematic diagram of the process and label all process

variables.
3. List all of the assumptions that are involved in developing the
model. Try for parsimony; the model should be no more
complicated than necessary to meet the modeling objectives.
4. Determine whether spatial variations of process variables are
important. If so, a partial differential equation model will be
required.
5. Write appropriate conservation equations (mass, component,
energy, and so forth).
4
 Table 2.1. (continued)
6. Introduce equilibrium relations and other algebraic
equations (from thermodynamics, transport phenomena,
chemical kinetics, equipment geometry, etc.).
7. Perform a degrees of freedom analysis (Section 2.3) to
Chapter 2

ensure that the model equations can be solved.

8. Simplify the model. It is often possible to arrange the
equations so that the dependent variables (outputs) appear
on the left side and the independent variables (inputs)
appear on the right side. This model form is convenient
for computer simulation and subsequent analysis.
9. Classify inputs as disturbance variables or as manipulated
variables.

5
 Table 2.2. Degrees of Freedom Analysis

1. List all quantities in the model that are known constants (or
parameters that can be specified) on the basis of equipment
dimensions, known physical properties, etc.
2. Determine the number of equations NE and the number of
Chapter 2

process variables, NV. Note that time t is not considered to be a

process variable because it is neither a process input nor a
process output.
3. Calculate the number of degrees of freedom, NF = NV - NE.
4. Identify the NE output variables that will be obtained by solving
the process model.
5. Identify the NF input variables that must be specified as either
disturbance variables or manipulated variables, in order to
utilize the NF degrees of freedom.
6
 Conservation Laws
Theoretical models of chemical processes are based on
conservation laws. Ncomponents
> Nindependent equations
Ni equations
"I dependent"

Conservation of Mass
 rate of mass  rate of mass   rate of mass 
Chapter 2

 = −  (2-6)

accumulation   in   out 

Conservation of Component i
rate of component i  rate of component i 
 = 
 accumulation   in 

rate of component i  rate of component i 

− +  (2-7)
 out   produced 
7
 Conservation of Energy
The general law of energy conservation is also called the First
Law of Thermodynamics. It can be expressed as:
rate of energy  rate of energy in  rate of energy out 
 = − 
 accumulation   by convection   by convection 
Chapter 2

meet
velocity of
to streams

Unlike contuction (through solids

net rate of heat addition   net rate of work 

   
+  to the system from  + performed on the system  (2-8)
 the surroundings   by the surroundings 
   

The total energy of a thermodynamic system, Utot, is the sum of its

internal energy, kinetic energy, and potential energy:

U tot = U int + U KE + U PE (2-9)

Transient fe changes with time .

8
 For the processes and examples considered in this book, it
is appropriate to make two assumptions:

1. Changes in potential energy and kinetic energy can be

neglected because they are small in comparison with changes
in internal energy.
2. The net rate of work can be neglected because it is small
Chapter 2

compared to the rates of heat transfer and convection.

For these reasonable assumptions, the energy balance in
Eq. 2-8 can be written as
dU int
dt
(
= −∆ wH + Q ) (2-10)
∆ = denotes the difference
U int = the internal energy of
between outlet and inlet
the system conditions of the flowing
H = enthalpy per unit mass streams; therefore
w = mass flow rate ( )
-∆ wH = rate of enthalpy of the inlet
Q = rate of heat transfer to the system stream(s) - the enthalpy
of the outlet stream(s) 9
 The analogous equation for molar quantities is,
dU int
dt
(
= −∆ wH + Q) (2-11)

where H is the enthalpy per mole and w is the molar flow rate.

In order to derive dynamic models of processes from the general

Chapter 2

energy balances in Eqs. 2-10 and 2-11, expressions for Uint and Ĥ
or H are required, which can be derived from thermodynamics.

The Blending Process Revisited

For constant ρ , Eqs. 2-2 and 2-3 become:
dV
ρ = w1 + w2 − w (2-12)
dt
ρ d (Vx )
= w1 x1 + w2 x2 − wx (2-13)
dt 10
 Equation 2-13 can be simplified by expanding the accumulation
term using the “chain rule” for differentiation of a product:
d (Vx ) dx dV
ρ = ρV + ρx (2-14)
dt dt dt
Substitution of (2-14) into (2-13) gives:
dx dV
Chapter 2

ρV + ρ x = w1 x1 + w2 x2 − wx (2-15)
dt dt
Substitution of the mass balance in (2-12) for ρ dV/dt in (2-15)
gives:
dx
ρV + x ( w1 + w2 − w ) = w1x1 + w2 x2 − wx (2-16)
dt
After canceling common terms and rearranging (2-12) and (2-16),
a more convenient model form is obtained:
dV 1
= ( w1 + w2 − w ) (2-17)
dt ρ
dx w1 w2
= ( x1 − x ) + ( x2 − x ) (2-18)
dt V ρ Vρ 11
 Stirred-Tank Heating Process
Hs specific
enthlpy

Hi
Chapter 2

H
e constant v

W
wi =

mass inside tank-gu

change
of Internal
=>

Energy

Hi - H + Q = DUCks /kg] . m

Figure 2.3 Stirred-tank heating process with constant holdup, V.

12
 (WH-w : Fi) D(WE

I
-
=

Energy Balance
-
:

initial

=#
final
Dit
- -

Awi - + Q
= (tin) eq (2-1)

w[kYn]
E Vint Eve
=
+
Epe
(Ei]
+

AFW =

[ing
Cp- STEP =

#- Pref =

Cp(T-Tref >

Cr
= Nint =
NOT

Wint =
IV Wins
6 Wins
Guint
=

JV
 Stirred-Tank Heating Process (cont’d.)

Assumptions:

1. Perfect mixing; thus, the exit temperature T is also the

Chapter 2

temperature of the tank contents.

2. The liquid holdup V is constant because the inlet and outlet
flow rates are equal.
3. The density ρ and heat capacity C of the liquid are assumed to
be constant. Thus, their temperature dependence is neglected.
4. Heat losses are negligible.
#10)

13
 Model Development - I
For a pure liquid at low or moderate pressures, the internal energy
is approximately equal to the enthalpy, Uint ≈ H, and H depends
only on temperature. Consequently, in the subsequent
development, we assume that Uint = H and Uˆ int = Hˆ where the
Chapter 2

caret (^) means per unit mass. As shown in Appendix B, a

differential change in temperature, dT, produces a corresponding
change in the internal energy per unit mass, dUˆ int ,

dUˆ int = dHˆ = CdT (2-29)

where C is the constant pressure heat capacity (assumed to be

constant). The total internal energy of the liquid in the tank is:

U int = ρVUˆ int (2-30)

14
 Model Development - II
An expression for the rate of internal energy accumulation can be
derived from Eqs. (2-29) and (2-30):
dU int dT
= ρVC (2-31)
dt dt
Chapter 2

Note that this term appears in the general energy balance of Eq. 2-
10.
Suppose that the liquid in the tank is at a temperature T and has an
enthalpy, Ĥ . Integrating Eq. 2-29 from a reference temperature
Tref to T gives,
ref (
Hˆ − Hˆ = C T − T ref ) (2-32)
where Hˆ ref is the value of Ĥ at Tref. Without loss of generality, we
assume that Hˆ ref = 0 (see Appendix B). Thus, (2-32) can be
written as:
(
Hˆ = C T − T ref ) (2-33)
15
 Model Development - III
For the inlet stream

(
Hˆ i = C Ti − Tref ) (2-34)
Chapter 2

Substituting (2-33) and (2-34) into the convection term of (2-10)

gives:
aut

( ) ( ,) ( )
in

−∆ wHˆ = w C Ti − Tref  − w C T − ,
Tref  (2-35)
   

Finally, substitution of (2-31) and (2-35) into (2-10)

dT
V ρC = wC (Ti − T ) + Q (2-36)
dt

16
 [
(2-36 in another way (

constant but depends on

geometry & physical properties

of the system.
ca
T :
controlled variable

input
[TiJ manipulated
variables

Q -
manipulated Cutility]
Tie disturbance
[processm]
 Degrees of Freedom Analysis for the Stirred-Tank
Model: geometryDepend on
-
3 parameters: physical
properties
V , ρ,C
4 variables: T , Ti , w, Q
1 equation: Eq. 2-36
Chapter 2

Thus the degrees of freedom are NF = 4 – 1 = 3. The process

variables are classified as:
1 output variable: T
3 input variables: Ti, w, Q

For temperature control purposes, it is reasonable to classify the

three inputs as:
2 disturbance variables: Ti, w
1 manipulated variable: Q
17
 continous stirred tank Reactor (CSTR)

Pure A

it
volumetric
flow rale
F
con

- mixture

&, Ca
AGB

,
T

V, 9 T ,

fat
cooling medium

at Temp =
To

equations (2-62)

&V
overall muss
balance
yq-
:

unsteady State
= q(CA-CA -V

L += torbance -
Rate of
rxn .
(2-68) El
↓
( DHR)
UKCA
-

Theat of
reaction
 Biological Reactions
• Biological reactions that involve micro-organisms and enzyme
catalysts are pervasive and play a crucial role in the natural
world.
Chapter 2

• Without such bioreactions, plant and animal life, as we know

it, simply could not exist.
• Bioreactions also provide the basis for production of a wide
variety of pharmaceuticals and healthcare and food products.
• Important industrial processes that involve bioreactions include
fermentation and wastewater treatment.
• Chemical engineers are heavily involved with biochemical and
biomedical processes.

18
 Bioreactions
• Are typically performed in a batch or fed-batch reactor.
• Fed-batch is a synonym for semi-batch.
• Fed-batch reactors are widely used in the pharmaceutical
Chapter 2

and other process industries.

• Bioreactions:
cells
substrate → more cells + products (2-90)
• Yield Coefficients:
mass of new cells formed
YX / S = (2-91)
mass of substrated consumed to form new cells

mass of product formed

YP / S = (2-92)
mass of substrated consumed to form product
19
 Fed-Batch Bioreactor

Monod Equation
Chapter 2

rg = µ X (2-93)

Specific Growth Rate

S
µ = µ max (2-94)
Ks + S

Figure 2.11. Fed-batch reactor

for a bioreaction.

20
 Modeling Assumptions
1. The exponential cell growth stage is of interest.
2. The fed-batch reactor is perfectly mixed.
3. Heat effects are small so that isothermal reactor operation can
be assumed.
Chapter 2

4. The liquid density is constant.

5. The broth in the bioreactor consists of liquid plus solid
material, the mass of cells. This heterogenous mixture can be
approximated as a homogenous liquid.
6. The rate of cell growth rg is given by the Monod equation in (2-
93) and (2-94).

21
 Modeling Assumptions (continued)
7. The rate of product formation per unit volume rp can be
expressed as
rp = YP / X rg (2-95)
Chapter 2

where the product yield coefficient YP/X is defined as:

mass of product formed

YP / X = (2-96)
mass of new cells formed

8. The feed stream is sterile and thus contains no cells.

General Form of Each Balance

{Rate of accumulation} = {rate in} + {rate of formation} (2-97)

22
 Individual Component Balances

d ( XV )
Cells: = V rg (2-98)
dt

d ( PV )
Product: = Vrp (2-99)
Chapter 2

dt

d( SV ) 1 1
Substrate: = F Sf − V rg − V rP (2-100)
dt YX / S YP / S

Overall Mass Balance

Mass: d (V )
= F (2-101)
dt

23