Scribd
Upload
7 views5 pages

Guide 3F

The document outlines the configuration of various network devices including PCs, servers, routers, and switches with specific IP addresses and settings. It details commands for setting up an ISP router, switches, and a core router, including VLAN configurations and NAT settings. Additionally, it provides instructions for testing connectivity and checking configurations using command line tools.

Uploaded by

emperer.galaxy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
7 views5 pages

Guide 3F

The document outlines the configuration of various network devices including PCs, servers, routers, and switches with specific IP addresses and settings. It details commands for setting up an ISP router, switches, and a core router, including VLAN configurations and NAT settings. Additionally, it provides instructions for testing connectivity and checking configurations using command line tools.

Uploaded by

emperer.galaxy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

1.

Set IP
PC0 PC1 PC2 Main Server
192.168.1.10 192.168.2.10 192.168.3.10 8.8.8.8
255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
192.168.1.1 192.168.2.1 192.168.3.1 8.8.8.1
8.8.8.8 8.8.8.8 8.8.8.8 8.8.8.8
Edit Server HTTP + turn on DNS and create a record named google with address
8.8.8.8.
PC4 Sub-Server PC3
100.0.0.150 8.8.8.10 100.0.0.50
255.255.255.0 255.255.255.0 255.255.255.0
100.0.0.1 8.8.8.1 100.0.0.1
8.8.8.8 8.8.8.8 8.8.8.8
2. Configure
ISP Router:
Basic:
Router>enable
Router#configure terminal
Router(config)#hostname ISP
ISP(config)#line console 0
ISP(config-line)#password cisco
ISP(config-line)#login
ISP(config-line)#exit
ISP(config)#line vty 0 4
ISP(config-line)#password cisco
ISP(config-line)#login
ISP(config-line)#exit
ISP(config)#banner motd "XIN CHAO"
ISP(config)#enable secret cisco)

IP Set:
ISP(config)#interface g0/0
ISP(config-if)#ip address 8.8.8.1 255.255.255.0
ISP(config-if)#no shutdown
ISP(config-if)#exit
ISP(config)#interface s0/0/0
ISP(config-if)#no shutdown
ISP(config-if)#ip address 200.0.0.1 255.255.255.0
ISP(config-if)#end
ISP#wr

Switch:
SwitchT1 (2,3):
Switch(config)#enable
Switch(config)#configure terminal
Switch(config)#hostname T1
T1(config)#line console 0
T1(config-line)#password cisco
T1(config-line)#login
T1(config-line)#exit
T1(config)#line vty 0 4
T1(config-line)#password cisco
T1(config-line)#login
T1(config-line)#exit
T1(config)#banner motd “xin chao”
T1(config)#enable secret cisco
T1(config)#vlan 11 (12,13)
T1(config-vlan)#name IT (Sale, Mar)
T1(config-vlan)#exit
T1(config)#interface range f0/1-20
T1(config-if-range)#switchport access vlan 11 (12,13)
T1(config-if-range)#exit
T1(config)#int vlan 1
T1(config-if)#no shut
T1(config-if)#ip address 100.0.0.5 (6,7) 255.255.255.0
T1(config-if)exit
T1(config-if)#end
T1#wr

Main Switch:

Switch(config)#enable
Switch(config)#configure terminal
Switch(config)#hostname C
C(config-if-range)#int range f0/1-10
C(config-if-range)#switchport mode trunk (cho phép nhiều vlan đi qua)
C(config-if-range)#exit
C(config-vlan)#vlan 11
C(config-vlan)#name IT
C(config-vlan)#vlan 12
C(config-vlan)#name Sale
C(config-vlan)#vlan 13
C(config-vlan)#name Mar
C(config-vlan)#exit
C(config)#int vlan 1
C(config-if)#no shut
C(config-if)#ip address 100.0.0.2 255.255.255.0
C(config-if)#exit
C(config)#line console 0
C(config-line)#password cisco
C(config-line)#login
C(config-line)#exit
C(config)#line vty 0 4
C(config-line)#password cisco
C(config-line)#login
C(config-line)#exit
C(config)#enable secret cisco
C(config)#end
C#wr

CORE Router:
Router>enable
Router(config)#configure terminal
Router(config)#hostname RC
RC(config)#line console 0
RC(config-line)#password cisco
RC(config-line)#login
RC(config-line)#exit
RC(config)#line vty 0 4
RC(config-line)#password cisco
RC(config-line)#login
RC(config-line)#exit
RC(config)#banner motd "XIN CHAO"
RC(config)#enable secret cisco
RC(config)#service password-encryption
RC(config)#int g0/0
RC(config-if)#no shutdown
RC(config-if)#exit
RC(config)#int g0/0.1
RC(config-subif)#encapsulation dot1Q 1
RC(config-subif)#if add 100.0.0.1 255.255.255.0
RC(config-subif)#ip nat inside
RC(config-subif)#exit
RC(config)#int g0/0.11
RC(config-subif)#encapsulation dot1Q 11
RC(config-subif)#ip add 192.168.1.1 255.255.255.0
RC(config-subif)#ip nat inside
RC(config-subif)#exit
RC(config)#int g0/0.12
RC(config-subif)#encapsulation dot1Q 12
RC(config-subif)#ip add 192.168.2.1 255.255.255.0
RC(config-subif)#ip nat inside
RC(config-subif)#exit
RC(config)#int g0/0.13
RC(config-subif)#encapsulation dot1Q 13
RC(config-subif)#ip add 192.168.3.1 255.255.255.0
RC(config-subif)#ip nat inside

RC(config-subif)#exit
RC(config)#int s0/0/0
RC(config-if)#no shut
RC(config-if)#clock rate 64000
RC(config-if)#ip add 200.0.0.100 255.255.255.0
RC(config-if)#ip nat outside
RC(config-if)#exit
RC(config)#access list 10 permit any
RC(config)#ip nat inside source list 10 interface s0/0/0 overload
RC(config)#ip route 0.0.0.0 0.0.0.0 200.0.0.1
RC(config)#end
RC#wr
RC#show run
3. Check
Go to command prompt and type “ping 8.8.8.8”.

To check switch, use “show vlan”. To check switch and router, use “show run”.

You might also like