Scribd
Upload
8 views

Raspberry Pi Workshop - Installation Guide

This guide provides step-by-step instructions for installing Raspberry Pi OS on your system. It includes downloading the OS, using the Raspberry Pi Imager for installation, enabling SSH, and installing VNC Viewer for remote access. Follow the outlined steps to successfully complete the installation process.

Uploaded by

Adarsh Dubey
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

Raspberry Pi Workshop - Installation Guide

This guide provides step-by-step instructions for installing Raspberry Pi OS on your system. It includes downloading the OS, using the Raspberry Pi Imager for installation, enabling SSH, and installing VNC Viewer for remote access. Follow the outlined steps to successfully complete the installation process.

Uploaded by

Adarsh Dubey
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

‭Raspberry Pi Workshop - Installation Guide‬

‭ his‬ ‭guide‬ ‭provides‬ ‭step-by-step‬ ‭instructions‬ ‭to‬ ‭install‬ ‭Raspberry‬ ‭Pi‬ ‭OS‬ ‭on‬ ‭your‬ ‭system.‬
T
‭Raspberry‬ ‭Pi‬ ‭OS‬ ‭is‬ ‭a‬ ‭lightweight‬ ‭and‬ ‭optimized‬ ‭operating‬ ‭system‬ ‭designed‬ ‭specifically‬ ‭for‬
‭Raspberry Pi devices. Follow the steps below to complete the installation process:‬

‭Step 1‬‭: Download the Raspberry Pi OS.‬

‭1.‬ V
‭ isit the following link to download the Raspberry Pi OS Imager:‬
‭https://downloads.raspberrypi.org/imager/imager_latest.exe‬

‭1.1 Click on‬‭Finish‬‭.‬

‭2.‬ D
‭ ownload the Raspberry Pi OS file from this link:‬
‭https://downloads.raspberrypi.com/raspios_armhf/images/raspios_armhf-2023-12-06/202‬
‭3-12-05-raspios-bookworm-armhf.img.xz‬
‭Step 2: Install Raspberry Pi OS Using Raspberry Pi Imager‬

‭1.‬ ‭Open the Raspberry Pi Imager application.‬

2‭ .‬ C‭ onnect your SD card or USB drive to your PC.‬


‭3.‬ ‭In the Imager:‬
‭○‬ ‭Click on‬‭Choose OS‬‭and select‬‭Use Custom‬‭.‬
‭○‬ ‭Browse to the downloaded Raspberry Pi OS file and select it.‬
‭4.‬ ‭Click on‬‭Choose Storage‬‭and select the connected SD card or USB drive.‬

‭5.‬ ‭Go to‬‭Edit Settings‬‭:‬


‭○‬ ‭Set the hostname to your name and group number (e.g., "pratikA2").‬
‭○‬ ‭Set the password as "admin".‬
‭○‬ ‭Select‬‭Enable SSH‬‭.‬
‭○‬ ‭Save the changes.‬
6‭ .‬ C‭ lick‬‭Write‬‭to flash the OS onto the SD card/USB drive.‬
‭7.‬ ‭Click on‬‭Yes.‬

‭8.‬ ‭Click on‬‭Yes.‬


‭9.‬ ‭Wait for the process to complete, including verification.‬

‭Step 3: Enable SSH on the Raspberry Pi‬

1‭ .‬ A ‭ fter installation, remove and reinsert the SD card/USB drive into your system.‬
‭2.‬ ‭Navigate to the‬‭boot‬‭drive.‬
‭3.‬ ‭Create a text file named‬‭ssh‬‭(without any file extension).‬
‭Step 4: Install VNC Viewer‬

‭1.‬ V ‭ NC‬ ‭Viewer‬‭:‬ ‭Download‬ ‭and‬ ‭install‬ ‭VNC‬ ‭Viewer‬ ‭for‬ ‭remote‬ ‭desktop‬ ‭access‬ ‭from‬‭this‬
‭link:‬
‭https://downloads.realvnc.com/download/file/viewer.files/VNC-Viewer-6.22.826-Windo‬
‭ws.exe‬

You might also like