website:http://biz.LGservice.com e-mail:http://www.LGEservice.com/techsup.

html

PLASMA TV SERVICE MANUAL

CHASSIS : RF-052C

MODEL : 42PX4RV 42PX4RV-MC

CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

POWER

TV GUIDE

CONTENTS

SAFETY PRECAUTIONS ...................................................................................3 ADJUSTMENT INSTRUCTIONS ........................................................................4 TROUBLE SHOOTING GUIDE ............................................................................9 BLOCK DIAGRAM .............................................................................................18 EXPLODED VIEW ..............................................................................................20 EXPLODED VIEW PARTS LIST ........................................................................21 REPLACEMENT PARTS LIST...........................................................................22 SCHEMATIC DIAGRAM ........................................................................................ PRINTED CIRCUIT BOARD ..................................................................................

- 2 -

SAFETY PRECAUTIONS
IMPORT ANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance
An lsolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitary that may be inadvertently introduced during the service operation. If any fuse (or Fusible Resistor) in this monitor is blown, replace it with the specified. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB. Keep wires away from high voltage or high temperature parts. Due to high vacuum and large surface area of picture tube, extreme care should be used in handling the Picture Tube. Do not lift the Picture tube by it's Neck.

Leakage Current Hot Check (See below Figure)

Plug the AC cord directly into the AC outlet. Do not use a line Isolation Transformer during this check. Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each esposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5mA. In case any measurement is out of the limits sepcified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.

Leakage Current Hot Check circuit

AC Volt-meter

Leakage Current Cold Check(Antenna Cold Check)

With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on positioin, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1M and 5.2M. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer.

To Instrument's exposed METALLIC PARTS

Good Earth Ground such as WATER PIPE, CONDUIT etc.

0.15uF

1.5 Kohm/10W

- 3 -

ADJUSTMENT INSTRUCTIONS
1. Application Object
These instructions is applied all of the PDP MONITOR/TV, RF-052C Chassis.

3-2. Channel Memory Method

(1) Select PDP and Hurricane on Model dialog. And check your connection in Communication dialog. (If your connection is NG, then set your PORT(COM1, 2,3,...) correctly.) (2) Connect RS-232C cable and turn on the power. (If your connection has completed, you can see ) [ If your set is not an end products but only a board, you have to make your board to Stand-by state (LED_R). And you have to Download in Stand_by power state.

2. Specification
(1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order. (3) The adjustment must be performed in the circumstance of 255C of temperature and 6510% of relative humidity if there is no specific designation. (4) The input voltage of the receiver must keep 100-220V, 50/60Hz. (5) The receiver must be operated for about 15 minutes prior to the adjustment. After RGB Full white in HEAT-RUN Mode, the receiver must be operated prior to the adjustment. O Enter into HEAT-RUN MODE (1) Press the POWER ON KEY on R/C for adjustment. (2) OSD display and screen display 100% full White pattern.
O

(Fig. 2)

[ Set is activated HEAT-RUN without signal generator in this mode. [ Single color pattern(RED/BLUE/GREEN) of HEAT-RUN mode uses to check PANEL. (Caution) If you turn on a still screen more than 20 minutes, (Especially digital pattern, cross hatch pattern) , an after image may be occur in the black level part of the screen.

3. Channel Memory
3-1. Setting up the LGIDS
(1) Install the LGIDS. (idsinst.exe) (2) After installation, restart your PC. (3) Extract [files.zip] to folder [c:\LGIDS\files]. (4) Start LGIDS.

(3) Select proper CH_memory file(*.nvm) for each model at [NVRAM Download] $ [Write Batch] Next, select proper binary file(*.bin) including the CH information for each model at [NVRAM File]. (4) Click the [Download] button. It means the completion of the CH memory download if all items show OK and Status is changed by PASS at the lower right corner of the window. (5) If you want to check whether the CH information is memorized correctly or not, click the [Verify] button. And then compare NVRAM File(*.bin) with the CH information downloaded.

(Fig. 3) (Fig. 1)

- 4 -

Each PCB assembly must be checked by check JIG set. (Because power PCB Assembly damages to PDP Module, especially be careful)

5. EDID (The Extended Display Identification Data)/ DDC (Display Data Channel) Download
5-1. Required Test Equipment
(1) Adjusting PC with S/W for writing EDID Data.(S/W : EDID TESTER Ver.2.5) (2) A Jig for EDID Download (3) Cable : Serial(9 Pin or USB) to D-sub 15 Pin cable, D-sub 15 Pin cable, DVI to HDMI cable

4. POWER PCB Assy Voltage Adjustments (Va, Vs Voltage Adjustments)

4-1. Test Equipment : D.M.M. 1EA 4-2.Connection Diagram for Measuring
Refer to Fig. 4

5-2. Setting of Device

4-3. Adjustment Method for P/No 3501V00221A B/D

(1) Va Adjustment
1) After receiving 100% Full White Pattern, HEAT RUN. 2) Connect + terminal of D.M.M to Va pin of P805, connect - terminal to GND pin of P805. 3) After turning RV601, voltage of D.M.M adjustment as same as Va voltage which on label of panel right/top. (Deviation; 0.5V)

(Fig. 5) Connection Diagram of DDC Download

5-3. Preparation for Adjustment

(1) As above Fig. 5, Connect the Set, EDID Download Jig, PC & Cable. (2) Turn on the PC & EDID Download Jig. And Execute the S/W : EDID TESTER Ver,2.5 (3) Set up S/W option Repeat Number : 5 Device Address : A0 PageByte : 8

(2) Vs Adjustment
1) Connect + terminal of D.M.M to Vs pin of P805, connect terminal to GND pin of P805. 2) After turning RV401, voltage of D.M.M adjustment as same as Va voltage which on label of panel right/top. (Deviation; 0.5V)
Va GND NC VS
P806

P805

DMM + P804

Va ADJ
RV601

Vs ADJ RV401

P807

P801

P802

P803

4) Power on the Set (Fig. 4) Connection Diagram of Power Adjustment for Measuring

5-4. Sequence of Adjustment

(1) DDC data of Analog-RGB
1) Init the data

- 5 -

2) Load the EDID data.(Open File) [Analog-RGB : RF052ABC_RGB.ANA] [Digital(HDMI) : RF052ABC_HDMI.DVI]

6-2. Required Equipment

(1) Remote controller for adjustment (2) AV Pattern Generator: 802F Pattern Generator, Master(MSPG-925FA), etc (Which has PAL Composite Video format output with standard(1.0 Vpp) Vertical 100% Color Bar Pattern as Fig. 7.

6-3. Method of Auto RGB Color Balance

(1) Input the PAL Composite Video (Fig. 7. 100% Color Bar Pattern) into video input. (RCA: AV1, SCART: AV3 Input, PAL: 50Hz, NTSC: 60Hz) (2) Set the PSM to Standard mode in Picture menu. (3) Press INSTAR key on R/C for adjustment. (4) Press the G (Vol. +) key operate to set, then it becomes automatically. (5) Auto-RGB OK means completed adjustment.
216 Level (85 IRE)

3) Set the S/W as below.

4) Push the Write Data & Verifybutton. And confirm Yes. 5) If the writing is finished, you will see the OK message.

(Fig. 7) Auto AV(CVBS) Color Balance Test Pattern

7. Adjustment of White Balance

7-1. Required Equipment
(1) Remote controller for adjustment (2) Color Analyzer (CA-100 or same product) (3) Auto W/B adjustment instrument(only for Auto adjustment) (4) AV Pattern Generator

7-2. Connecting diagram of equipment for measuring (For Auto Adjustment)

(Fig. 6) EDID DATA

6. Auto AV(CVBS) Color Balance

6-1. Requirement
This AV color balance adjustment should be performed befor white Balance Adjustment

(Fig. 8) Connection Diagram of Auto W/B Adjustment

- 6 -

Auto adjustment Map(RS-232C) Type Baud Rate 115200 Index R Gain Data bit 8 Cmd1 Cmd2 j j j j j j a b c d e f RF-052A/B/C Stop bit 1 Parity NONE

(8) Adjust it until color coordination becomes as below. (Initially, R/G/B gain and R/G/B offset values are fixed as bleow Red Gain: 82, Green Gain: 80, Blue Gain: 86 Red Offset: 7D, Green Offset: 7E, Blue Offset : 80) Bright : Color-Coordinate : High Light : 80 20cd High Light : X : 0.285 0.002 Y : 0.290 0.002

Data Min Value Max Value 00(00) 00(00) 00(00) 00(00) 00(00) 00(00) 255(FF) 255(FF) 255(FF) 255(FF) 255(FF) 255(FF)

G Gain Protocol B Gain Setting R Offset G Offset B Offset

Color Temperature : 9,300K 500K (9) When adjustment is completed, Exit adjustment mode using EXIT key on R/C

8. Auto Component Color Balance

[Requirement] It is very import to use correct adjustment pattern like fig. 9. 1) Within the pattern, color sequence should be aligned: W-Y-C-G-M-R-BLUE-BLACK (If color sequence is reversed(Black -> ... > White), reverse the pattern with REV key, when using Master pattern generator like MSPG-925) 2) If Minimum Black Level and/or Maximum White Level is not correct, Do select 100% Color Bar Pattern.

7-3. Adjustment of White Balance

(For Manual Adjustment) Operate the zero-calibration of the CA-100, then stick sensor to PDP module surface when you adjust. O For manual adjustment, it is also possible by the following sequence.
O

(1) Select white pattern of heat-run mode by pressing power on key on remote control for adjustment then operate heat run more than 15 minutes. (2) As below Fig. 9, Supply 216Level (85 IRE) full screen pattern to Video input. (RCA: AV1, SCART: AV3, PAL: 50Hz, NTSC: 60Hz)
216 Level (85 IRE)

8-1. Required Test Equipment

(1) Remote controller for adjustment (2) 802F Pattern Generator (Which has 720p Ypbpr output & PC 1024x768 @60Hz with Standard(0.7Vpp) Vertical 100% Color Bar Pattern as Fig. 10)

(Fig. 9) Pattern for Adjjustment of White Balance (3) Press the TV/AV KEY on R/C for converting input mode. (4) Set the PSM to Standard mode in Picture menu. (5) Enter the White Balance adjustment mode by pressing the INSTART key twice(White Balance) on R/C. (6) Stick sensor to center of the screen and select each items (Red/Green/Blue Gain and offset) using D/E(CH +/-) key on R/C. (7) Adjust Only High Light with R Gain/ B Gain using F/G (VOL +/-) key on R/C. (Fig. 10) Auto Component Color Balance Test Pattern

8-2. Method of Auto Component Color Balance

(1) Input the Component 720p 100% Color Bar signal into Component1 or Component2. (2) Set the PSM to Standard mode in Picture menu. (3) Press ADJ key on R/C for adjustment. (4) Press the G (Vol. +) key operate To set, then it becomes automatically. (5) Auto-RGB OK means complete adjustment

- 7 -

9. Auto RGB Color Balance

[Requirement] It is very import to use correct adjustment pattern like fig. 11. 1) Within the pattern, color sequence should be aligned: W-Y-C-G-M-R-BLUE-BLACK (If color sequence is reversed(Black -> ... > White), reverse the pattern with REV key, when using Master pattern generator like MSPG-925) 2) If Minimum Black Level and/or Maximum White Level is not correct, Do select 100% Color Bar Pattern.

10. Default Value in Adjustment Mode

10-1. Auto Color Balance (Component/RGB)
Auto Color Balance(HEX) Auto-RGB Source Red Offset1 Green Offset1 Blue Offset1 Red Offset2 Green Offset2 Blue Offset2 Red Gain Green Gain Blue Gain Reset
G

9-1. Required Test Equipment

(1) Remote controller for adjustment (2) 802F Pattern Generator (Which has VGA 60Hz PC Format output with standard (0.7Vpp) Vertical 16 Gray Scale pattern as Fig.11)

To Set Cortez 22 24 23 45 43 37 014 031 011 G To Set

(Fig. 12) Default Value on OSD

10-2. White Balance

(Fig. 11) Auto RGB Color Balance Test Pattern

White Balance(Hex) Red Gain Red Offset Green Gain Green Offset Blue Gain Blue Offset Reset 82 80 86 7D 7E 80 To Set

9-2. Method of Auto RGB Color Balance

(1) Input the PC 1024x768 @ 60Hz 100% Color bar into RGB. (2) Set the PSM to Standard mode in Picture menu. (3) Press ADJ key on R/C for adjustment. (4) Press the G (Vol. +) key operate To set, then it becomes automatically. (5) Auto-RGB OK means completed adjustment.

(Fig. 13) Default Value on OSD

- 8 -

TROUBLE SHOOTING GUIDE

1. Power Board
1-1. The whole flowchart which it follows in voltage output state

Start check

Doesn't the screen whole come out?

Yes

Is it identical with Power Off condition? Yes

No

Is the Interface signal operated?

Yes 2. Check the Interface signal condition.

No

1. Check the Power Off condition.

Doesn't the low pressure output come out?

Yes

Doesn't the St-by 5V signal come out? Yes

No

Doesn't the 5V Monitor signal come out? Yes 4. Check the 5V Monitor signal circuit.

No

Doesn't the VSC signal RL-ON come out? Yes 5. Check the VSC RL-ON signal. No

No

3. Check the St-by 5V signal circuit.

Doesn't the high tension output come out?

Yes

Doesn't the VSC signal Vs-ON come out? Yes

No

Doesn't the Vs, Va voltage output come out? Yes 8. Check the Vs, Va voltage output circuit.

Doesn't the VSC low pressure output come out? Yes 6. Check the VSC low pressure output

No

7. Check the VSC Vs-ON signal

Does high tension output voltage Drop occur? No

Yes

When the Y, Z B/D Module input connector is remove, does Power Board hightension output voltage Drop occur? Yes 9. Check the Power Board Output high tension circuit

No

When the Y B/D Module input connector is removed, does output voltage drop occur? Yes 10. Check the Z B/D Module output circuit

No

When the Z B/D Module input connector is removed, does output voltage Drop occurs? Yes 11. Check the Y B/D Module output circuit

Manufacture enterprise meaning of a passage

- 9 -

1-2. Sony Power Board Structure

T502: Vs Trans T702: Va Trans T101: St-by Trans

1 2 3

T103: Low Voltage Trans

- 10 -

1-3. Sanken, LGIT Power Board Structure

T221: Vs Trans T271: Va Trans T121: St-by Trans

1 2 3

T201: Low Voltage Trans

- 11 -

2. No Power
(1) Symptom

Doest minute discharge at module. Non does not come in into the front LED.

(2) Check following

No Is plug in power cord? Yes No Connect the Cable. Plug in power cord.

Is the Line Filter and Power Board Cable connected? Yes

Is the Fuse(F101) on Power Board normal? Yes

No Replace the Fuse.

Is the Power Board and 7P of VSC Board Cable connected? Yes

No Connect the Cable.

After the cable connect is remved to Power Board(except the CN101 connection cable), the AC voltage marking is authorized on manual. When ST-BY 5V is not operated, replace Power Board.

- 12 -

3. Protect Mode
(1) Symptom
After once shining, it does not discharge minutely from module The Rely falls(The sound is audible click) It is converted with the color where the front LED is red from green.

(2) Check following

Is the Power Board normal ? Yes Is the each connector normal? Yes Is the Y-Board normal? Yes Is the Z-Board normal? Yes Is the X- Board normal? Yes Is the Ctrl Board normal? Yes Is the VSC Board normal? Yes Is the COF of X, Y, Z normal ? No After crisis COF of each board, check the normality operates. If in case normality operates, correspondence COF Fail is replace the module. No Is the output voltage normal after remove P1001, P1100? Yes After remove P1001, 1100 normal operation: Replace VSC Board No Is the output voltage normal after remove P1, 2, 4, 9, 10 connector of Ctrl-B/D? Yes Replace X-Board. No Is the output voltage normal after remove P1, 2, 3, 4, 5 connector of X-B/D? Yes After remove P1, P2, P3 output voltage normality: Replace Right X-B/D After remove P4, P5 output voltage normality: Replace Left X-B/D No Is the Fuse (FS1, FS2) on Z-B/D normal? (In case of open is replace) Yes Is the output voltage normal after remove P1 connector of ZB/D? Yes Replace Z-Board. No Is the Fuse(FS2) on Y-B/D normal? (In case of open is replace) Yes Is the output voltage normal after remove P5, P6 connector of Y-B/D? Yes Replace Y-Board. No After connecting well each connector, the normality it operates? No Replace the connector. No Is output the normality Low/High voltage except Stand-by 5V? No Replace Power Board.

- 13 -

4. No Raster
(1) Symptom

Doest minute discharge at module. It maintains the condition where the front LED is green.

(2) Check following

Is the Power Board normal? Yes Is the each connector normal? Yes Is the Y-Board normal? Yes Is the Z- Board normal? Yes Is the X- Board normal? Yes Is the Ctrl Board normal? Yes Is the VSC Board normal? Yes Is the COF of X, Y, Z normal? No After crisis COF of each board, check the normality operates. If in case normality operates, correspondence COF Fail is replace the module. No Is the output voltage normal after remove P1001, P1100? Yes After remove P1001, P1100 normal operation: Replace the VSC Board No Is the output voltage normal after remove P1, 2, 4, 9, 10 connector of Ctrl-B/D? Yes Replace X-Board. No Is the output voltage normal after remove P1, 2, 3, 4, 5 connector of X-B/D? Yes After remove P1, P2, P3 output voltage normality: Replace Right X-B/D After remove P4, P5 output voltage normality: Replace the Left X-B/D No Is the Fuse(FS1, FS2) normal on Z-B/D? (In case of open is replace) Yes Is normal the output voltage after remove P1 connector of Z-B/D? Yes Replace Z-Board. No Is the Fuse(FS2) normal on Y-B/D? (In case of open is replace) Yes Is the output voltage normal after remove P5, P6 connector of Y-B/D? Yes Replace Y-Board. No After connecting well each connector, the normality it operates? No Replace the connector. No Is output the normality Low/High voltage except Stand-by 5V? No Replace the Power Board.

- 14 -

5. In case of occurring strange screen into specific mode

5-1. In case the OSD does not displayed
(1) Symptom

LED is green The minute discharged continuously becomes accomplished from module

(2) Check following

Is the LVDS cable normal ? No Is the LVDS cable connected well? No Yes Replace the cable.

Yes

Cable inserts well.

Is the VSC Board normal?

No

Does the FIL8532 IC (IC800) Operates ? No

Yes Replace VSC B/D

Yes

Replace FIL8532 IC(IC800).

Is the Ctrl Board of Module normal?

No Replace Ctrl B/D.

- 15 -

5-2. In case of doest display the screen into specific mode

(1) Symptom

The screen does not become the display from specific input mode (RF, AV, Component, RGB, DVI).

(2) Check following

Check the all input mode should become normality display. Check the Video(Main)/Data(Sub), Video(Main)/Video(Sub) should become normality display from the PIP mode or DW mode. (Re-Check it Swap)

(3) In case of becomes unusual display from RF mode

No Is the Tuner normal? Is the Tuner Cable connected well? No Yes Cable inserts well. No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC Yes Is the Input voltage, IIC Communication and CVBS output normal? No Replace the Tuner

Is the CXA2069Q normal? Yes Is the FIL8532 normal?

No

Is normal the Input voltage, IIC Communication and HV sync?

No Replace the IC

(4) In the case of becomes unusual display from RF, AV mode

Is the CXA2069Q normal? Yes Is the FIL8532 normal? No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC

(5) In the case of becomes unusual display from Component, RGB mode
Is the FIL8532 normal? No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC

(6) In the case of becomes unusual display from HDMI mode

Is the Sil9011 normal? Yes Is the FIL8532 normal? No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC

- 16 -

6. In case of no sound
(1) Symptom

LED is green Screen display but sound is not output

(2) Check following

Is the SPK cable normal? No Is the SPK cable connected well? No Yes Cable inserts well. Yes Replace SPK cable

Is the RF/ AV/ Component/ RGB/ HDMI sound normal?

No

Does IC400 Operates ? No Replace IC400

Yes

Does IC401 Operates ? No Replace IC401

Yes

Does IC402 Operates ? No Replace IC402

Replace VSC B/D

- 17 -

BLOCK DIAGRAM

Cable IR

- 18 -

MEMO

- 19 -

EXPLODED VIEW
300

121

600

601 301

560 700 304

120 302

303

200

207 206 201

202

205

203 590 520 501

204 580 240

540 502

400

430

- 20 -

EXPLODED VIEW PARTS LIST

No.
120 121 200 201 202 203 204 205 206 207 240 300 301 302 303 304 400 430

Part No.
6401VD0024A 6401VD0025A 6348Q-E092H 6871QCH053A 6871QDH084A 6871QDH085A 6871QLH047A 6871QRH055A 6871QYH036A 6871QZH041A 4980V00C84A 3091V00738G 3110V00445A 3110V00444A 3110V00442A 3110V00443A 3809V00513A 3501V00207A 3501V00216A

Description
SPEAKER ASSEMBLY,FULL RANGE(R) NON RZ-42PX40 R SPEAKER ASSEMBLY,FULL RANGE(L) NON RZ-42PX40 L PDP,42 852*480 PDP42V70152.AKLGG PCB ASSEMBLY,DISPLAY CTRL ASSY 42V7 FPGA PCB ASSEMBLY,DISPLAY YDRV ASSY 42V7 YDRV TOP B/D PCB ASSEMBLY,DISPLAY YDRV ASSY 42V7 YDRV BTM B/D PCB ASSEMBLY,DISPLAY XRLT ASSY 42V7 XL B/D PCB ASSEMBLY,DISPLAY XRRT ASSY 42V7 XR B/D PCB ASSEMBLY,DISPLAY YSUS ASSY 42V7 PCB ASSEMBLY,DISPLAY ZSUS ASSY 42V7 ZSUS ASSY SUPPORTER ASSY,AL RZ-42PX40 CABINET ASSEMBLY,RP-42PX40 STEREO E_PHONE MF056A FILM TYPE CASE,TOP RT-42PX40 EGI PRESS CASE,BOTTOM RT-42PX40 EGI PRESS CASE,MODULE SIDE RT-42PX40 EGI RIGHT PRESS CASE,MODULE SIDE RT-42PX40 EGI LEFT PRESS BACK COVER ASSEMBLY BOARD ASSEMBLY,AP-42DX40 NON WITHOUT PACKING BOARD ASSEMBLY,AP-42DX41 NON WITHOUT PACKING *LGECM PLATE ASSEMBLY,AV 3301V00053E 3301V00054A RU-42PX40 ASSY PLATE ASSEMBLY PCB ASSEMBLY,MAIN RF-052C H2 RP-42PX40 PCB ASSEMBLY,SUB RF052A H2 RP-42PX51X RCA ATTACHABLE MANNUAL PCB ASSEMBLY,SUB CONT MF056A 42PX4RV CONTROL B/D POWER SUPPLY ASSEMBLY,HURRICANE2 FREE VOLTAGE SANKEN 42 PSU CHASSIS ASSEMBLY,SUB MF056A AC INET ASSY PCB ASSEMBLY,SUB JACK RF052C H2 RU-42PX40 SIDE A/V MANUAL BRACKET ASSEMBLY,SIDE AV RT-42PX40 AF044A ASSY SIDE AV SENSOR,YGCA-T068A LG INNOTEK NONE DIGITAL EYE SENSOR ASSY

501 502 520 540 560 580 590 600 601 700

3301V00055E 3301V00080A 6871VMMG73A 6871VSMK95A 6871VSMS35A 3501V00220A 3141VSN422A 6871VSMS99A 4811V00173A 6500VR0002A

- 21 -

REPLACEMENT PARTS LIST

For Capacitor & Resistors, the charactors at 2nd and 3rd digit in the P/No. means as follows; CC, CX, CK, CN : Ceramic CQ : Polyestor CE : Electrolytic RD : Carbon Film RS : Metal Oxide Film RN : Metal Film RF : Fusible

RUN DATE : 2005.4.15

LOCA. NO

PART NO

DESCRIPTION

LOCA. NO Q1004 Q101

PART NO 0TR387500AA 0TR387500AA 0TR102008AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR150400BA 0TR150400BA 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR102008AA 0TR387500AA 0TR387500AA 0TR102008AA

DESCRIPTION CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC KRA102S R/TP KEC SOT23 CHIP TR CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SA1504S(ASY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SA1504S(ASY) BK KEC CHIP 2SA1504S(ASY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SA1504S(ASY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SA1504S(ASY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC KRA102S R/TP KEC SOT23 CHIP TR CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC KRA102S R/TP KEC SOT23 CHIP TR

IC
IC1000 IC1001 IC1002 IC1003 IC1004 IC1005 IC1100 IC1101 IC1102 IC1103 IC1104 IC1105 IC1200 IC1201 IC1502 IC202 IC300 IC301 IC400 IC401 IC402 IC407 IC500 IC502 IC509 IC600 IC700 IC701 IC703 IC800 IC802 IC901 IC902 0IPRPML001A 0IMCRRH001A 0IMCRFA010A 0IPMG00027A 0IMCRRH001A 0IMCRRH001A 0IMCRRH001A 0IPRPML001A 0IPMG00027A 0IPMGKE030A 0IPMG00027A 0IPRPML001A 0IPRPS5005A 0IMMRAL014B 0IPMGKE030A 0IPMGON013B 0ISO206900A 0ISA721700C 0IMCRMN027D 0ILNR00015A 0IMCRTI028C 0IPH741400E 0IMMRAL014B 0IPH741400E 0IPRPBB005A 0IPRP00009A 0IMCR02006A 0IMMRAL025A 0IMMR00004A 0IMCR02005A 0IMP242560A 0IMMR00002A 0IMMR00002A MIC39100 3P SOT223 BA033FP-E2 3P-SOP,TO252-3 R/TP 3.3V KA7809R 2P SC156515M-1.8TR 5P/TO-263-5 R/TP 1.5A BA033FP-E2 3P-SOP,TO252-3 R/TP 3.3V BA033FP-E2 3P-SOP,TO252-3 R/TP 3.3V BA033FP-E2 3P-SOP,TO252-3 R/TP 3.3V MIC39100 3P SOT223 R/TP LDO TYPE 2.5V SC156515M-1.8TR 5P/TO-263-5 KIA78R05F 5PIN DPAK R/TP 1A,5V SC156515M-1.8TR 5P/TO-263-5 MIC39100 3P SOT223 SII9011CLU(PB FREE) 128P AT24C02N-10SI-2.7 8P KIA78R05F 5PIN DPAK R/TP 1A,5V MC34063ADR2G SO-8P CXA2069Q QFP64 BK I2C BUS AV S/W LA7217M MFP14 MSP4440K 80P NSP-2100A 64P TAS5122DCAR 56P 74HC14D 14SOP AT24C02N-10SI-2.7 8P 74HC14D 14SOP OPA3692IDBQ 16PIN ICL3232CBNZ INTERSIL 16P FLI8125BB-LF GENESIS 208P AT24C32AN-10SI-2.7 8PIN SST25VF040-20-4C-S2AE-T 8P FLI8532BD-LF 416P 24LC256-I/SM 8P K4D261638F-LC50 66P K4D261638F-LC50 66P

Q102 Q1200 Q1401 Q1402 Q200 Q201 Q202 Q203 Q204 Q205 Q207 Q300 Q301 Q302 Q303 Q304 Q305 Q400 Q401 Q402 Q403 Q404 Q405 Q406 Q407 Q408

DIODE
D1003 D1005 D1006 D1007 D1008 D1009 D1010 0DL233309AC 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD200009AF 0DD200009AF 0DD226239AA 0DL233309AC 0DL233309AC 0DL233309AC 0DL233309AC 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA LED,SAM2333 KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC RU2M V(1) TP SANKEN RU2M V(1) TP SANKEN KDS226 TP KEC LED,SAM2333 LED,SAM2333 LED,SAM2333 LED,SAM2333 KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC

TRANSISTOR
IC1202 IC1203 IC200 IC201 IC503 IC504 Q100 Q1000 Q1001 Q1002 Q1003 0TR830009BA 0TR830009BA 0TR830009BA 0TR830009BA 0TR830009BA 0TR830009BA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA BSS83 BSS83 BSS83 BSS83 BSS83 BSS83 CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC CHIP 2SC3875S(ALY) BK KEC

D1012 D1013 D1100 D1101 D1102 D1103 D1104 D1105 D1106 D1107 D1109

- 22 -

REPLACEMENT PARTS LIST

LOCA. NO D1110 D1200 D1201 D1500 D500 D501 D502 D504 D505 D506 ZD300 ZD301 ZD400 ZD600 PART NO 0DD226239AA 0DD184009AA 0DS113379BA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DR050008AA 0DR050008AA 0DR050008AA 0DR050008AA 0DR050008AA 0DZRM00248A 0DR050008AA DESCRIPTION KDS226 TP KEC KDS184 TP KEC - 85V - 300MA 1SS133 T-72 DO34 90V KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC SD05.TC SOD323 5V 5A 15A SD05.TC SOD323 5V 5A 15A SD05.TC SOD323 5V 5A 15A SD05.TC SOD323 5V 5A 15A SD05.TC SOD323 5V 5A 15A ZENERS,RLZ8.2B-TE11 SD05.TC SOD323 5V 5A 15A LOCA. NO C1116 C1117 C1118 C1119 C1120 C1126 C113 C1136 C1138 C114 C1148 C1149 C1150 C1151 C1156 C1159 C1160 C1162 C1165 C1166 C1185 C1186 C1187 C1188 C1189 C1190 C1191 C1192 C1193 C1194 C1195 C1199 C1200 C1201 C1225 C1230 C1231 C1245 C1247 C1304 C1306 C1311 C1312 C1313 C1315 C1316 C1317 C1318 C1481 C1482 C1502 PART NO 0CE477SF6DC 0CE227VF6DC 0CE477SF6DC 0CE477DJ618 0CE227VF6DC 0CE477SF6DC 0CE106SF6DC 0CE107SF6DC 0CE107SF6DC 0CE106SF6DC 0CE476SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE477SF6DC 0CE107SF6DC 0CE107SF6DC 0CE106SF6DC 0CE106SF6DC 0CE106SF6DC 0CK105DF64A 0CK105DF64A 0CE106SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE475SK6DC 0CE475SK6DC 0CE477SF6DC DESCRIPTION 470UF MVG 16V 20% 220UF MV 16V 20% 470UF MVG 16V 20% 470UF STD 35V 20% 220UF MV 16V 20% 470UF MVG 16V 20% 10UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 10UF MVG 16V 20% 47UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 470UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 10UF MVG 16V 20% 10UF MVG 16V 20% 10UF MVG 16V 20% 1UF 2012 16V 20% 1UF 2012 16V 20% 10UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 4.7UF MVG 50V 20% 4.7UF MVG 50V 20% 470UF MVG 16V 20%

CAPACITOR
C1000 C1005 C1007 C1009 C1010 C1019 C103 C1030 C1043 C1046 C1047 C1050 C1051 C1064 C1065 C1066 C1067 C1068 C1069 C1071 C1073 C108 C1082 C1083 C1084 C1085 C1087 C1098 C1099 C1102 C1105 C1107 C1108 C1110 C1115 0CE477SF6DC 0CE477SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE476SF6DC 0CE4763F618 0CE476SF6DC 0CE476SF6DC 0CE477SF6DC 0CE476SF6DC 0CE477SF6DC 0CE477SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE477SF6DC 0CE477SF6DC 0CE477SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE477SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE107SF6DC 0CE107SF6DC 0CE477SF6DC 0CE477DJ618 470UF MVG 16V 20% 470UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 47UF MVG 16V 20% 47UF SRE,SE 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 470UF MVG 16V 20% 47UF MVG 16V 20% 470UF MVG 16V 20% 470UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 470UF MVG 16V 20% 470UF MVG 16V 20% 470UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 470UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 470UF MVG 16V 20% 470UF STD 35V 20%

- 23 -

REPLACEMENT PARTS LIST

LOCA. NO C1507 C1514 C1515 C1516 C1832 C1833 C1834 C203 C204 C205 C208 C210 C211 C214 C215 C215 C221 C238 C241 C300 C304 C305 C307 C315 C318 C319 C320 C335 C337 C342 C368 C370 C371 C402 C403 C407 C413 C418 C419 C421 C425 C444 C451 C456 C457 C462 C463 C464 C465 C480 C481 PART NO 0CE477SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE106SF6DC 0CE106SF6DC 0CE106SF6DC 0CE475SK6DC 0CE477SF6DC 0CE105SK6DC 0CE477SF6DC 0CE475SK6DC 0CE477SF6DC 0CE106SF6DC 0CE105SK6DC 0CE475SK6DC 0CE477SF6DC 0CE107SF6DC 0CE476SK6D8 0CE107SF6DC 0CE226SF6DC 0CE107SF6DC 0CE476SF6DC 0CK225DFK4A 0CK225DFK4A 0CK225DFK4A 0CK225DFK4A 0CE476SF6DC 0CE105SK6DC 0CE105SK6DC 0CK225DFK4A 0CK225DFK4A 0CK225DFK4A 0CE476SF6DC 0CE106SF6DC 0CE107SF6DC 0CE335VK6DC 0CE107SF6DC 0CE107SF6DC 0CK105DF64A 0CE226SF6DC 0CE107SF6DC 0CK105DF64A 0CK105DF64A 0CE335VK6DC 0CE107SF6DC 0CE106SF6DC 0CE106SF6DC 0CE106SK6DC 0CE108DJ618 0CE475SK6DC DESCRIPTION 470UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 10UF MVG 16V 20% 10UF MVG 16V 20% 10UF MVG 16V 20% 4.7UF MVG 50V 20% 470UF MVG 16V 20% 1UF MVG 50V 20% 470UF MVG 16V 20% 4.7UF MVG 50V 20% 470UF MVG 16V 20% 10UF MVG 16V 20% 1UF MVG 50V 20% 4.7UF MVG 50V 20% 470UF MVG 16V 20% 100UF MVG 16V 20% 47UF MVG,MC 50V 20% 100UF MVG 16V 20% 22UF MVG 16V 20% 100UF MVG 16V 20% 47UF MVG 16V 20% 2.2UF 2012 16V 20%,-20% 2.2UF 2012 16V 20%,-20% 2.2UF 2012 16V 20%,-20% 2.2UF 2012 16V 20%,-20% 47UF MVG 16V 20% 1UF MVG 50V 20% 1UF MVG 50V 20% 2.2UF 2012 16V 20%,-20% 2.2UF 2012 16V 20%,-20% 2.2UF 2012 16V 20%,-20% 47UF MVG 16V 20% 10UF MVG 16V 20% 100UF MVG 16V 20% 3.3UF MV 50V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 1UF 2012 16V 20% 22UF MVG 16V 20% 100UF MVG 16V 20% 1UF 2012 16V 20% 1UF 2012 16V 20% 3.3UF MV 50V 20% 100UF MVG 16V 20% 10UF MVG 16V 20% 10UF MVG 16V 20% 10UF MVG 50V 20% 1000UF STD 35V 20% 4.7UF MVG 50V 20% LOCA. NO C482 C483 C484 C495 C527 C545 C546 C547 C548 C549 C550 C553 C555 C557 C559 C610 C614 C615 C620 C621 C622 C728 C729 C730 C731 C735 C737 C739 C745 C750 C752 C760 C762 C764 C767 C771 C832 C833 C834 C835 C836 C837 C838 C839 C840 C851 C853 C884 C896 C901 C904 PART NO 0CE475SK6DC 0CF4741L438 0CF4741L438 0CE108DJ618 0CE476SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE477VF6DC 0CE477VF6DC 0CE477VF6DC 0CE107SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC DESCRIPTION 4.7UF MVG 50V 20% 0.47UF D 63V 5% 0.47UF D 63V 5% 1000UF STD 35V 20% 47UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 100UF MVG 16V 20% 470UF MV 16V 20% 470UF MV 16V 20% 470UF MV 16V 20% 100UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 47UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20%

- 24 -

REPLACEMENT PARTS LIST

LOCA. NO C905 C930 C946 C947 C952 PART NO 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC 0CE226SF6DC DESCRIPTION 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% 22UF MVG 16V 20% LOCA. NO AR701 AR702 AR703 AR704 AR705 AR806 AR807 AR808 AR809 AR810 AR811 AR812 AR813 AR814 AR815 AR816 AR817 R230 PART NO 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RD0331H609 DESCRIPTION 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% 3.3 OHM 1/2 W 5.00% TA52

COIL
L1000 L1101 L1102 L1103 L1104 L1124 L409 L410 L411 L412 6140VB0004B 6140VB0004B 6140VB0004B 6140VB0004B 6140VB0004B 6140VB0004B 6140VB0032A 6140VB0032A 6140VB0032A 6140VB0032A COIL,CHOKE 26UH COIL,CHOKE 26UH COIL,CHOKE 26UH COIL,CHOKE 26UH COIL,CHOKE 26UH COIL,CHOKE 26UH COIL,CHOKE DBF-1015A 15.5UH COIL,CHOKE DBF-1015A 15.5UH COIL,CHOKE DBF-1015A 15.5UH COIL,CHOKE DBF-1015A 15.5UH

CONNECTOR
C10 C11 C12 C13 C14 C4 C5 C6 C7 C8 C9 JK503 JK601 387-J12N 6631V39013N 6631V39022D 6631V39023C 6631V12047L 6631V00020J 387-G07J 6631V00045K 6631V25032C 6631V25051B 6631V25083E 6630G70021A 6630VGA004B CONNECTOR ASSEMBLY,12P 2.5MM 900MM CONNECTOR ASSEMBLY,8P 3.96MM 900MM CONNECTOR ASSEMBLY,4P 3.96MM 250MM CONNECTOR ASSEMBLY,10P 3.96MM 200MM CONNECTOR ASSEMBLY,13P 1.25MM 700MM CONNECTOR ASSEMBLY,3P 3.96MM 400MM CONNECTOR ASSEMBLY,7P 2.5MM 500MM CONNECTOR ASSEMBLY,10P 2.5MM 550MM CONNECTOR ASSEMBLY,3P 2.5MM 200MM CONNECTOR ASSEMBLY,4P 2.5MM 150MM CONNECTOR ASSEMBLY,7P 2.5MM 300MM CONNECTOR,D-SUB 30P 2.54MM CONNECTOR,D-SUB 9P 2.77MM

SWITCH
SW101 SW102 SW103 SW104 SW105 SW106 SW107 SW108 SW700 SW800 140-315A 140-315A 140-315A 140-315A 140-315A 140-315A 140-315A 140-315A 6600VR1004A 6600VR1004A SWITCH,TACT SKHV17910B SWITCH,TACT SKHV17910B SWITCH,TACT SKHV17910B SWITCH,TACT SKHV17910B SWITCH,TACT SKHV17910B SWITCH,TACT SKHV17910B SWITCH,TACT SKHV17910B SWITCH,TACT SKHV17910B SWITCH,TACT SKHMPW 5P SWITCH,TACT SKHMPW 5P

FILTER & CRYSTAL

L100 L1004 L1005 L1006 L1007 L1008 L1009 L101 L1010 L1011 L1012 L1013 L1014 L1015 L1016 L1017 L1018 L1019 L102 6200JB8010L 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200JB8010L 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200JB8010L FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-201209-1000L-N2

JACK
JK101 JK101 JK102 JK103 JK104 JK1200 JK400 JK502 6613V00026A 6612VJH020C 6612VJH019C 6612VJH020B 380-363G 6612B00015A 6612JH003CA 6612F00006F JACK ASSEMBLY,UJB-03-28A JACK,RCA PPJ122C 6P JACK,RCA PPJ121-22 4P JACK,RCA PPJ122B 6P JACK,DIN 6046B-01S JACK,DIN DC1R019NDA JAE 1.0MM JACK,RCA PPJ137A JACK,PHONE KJA-PH-3-0064

RESISTOR
AR1200 AR1201 AR1202 AR1203 AR1204 AR1205 AR700 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5% 22 OHM 1 / 16 W 1608 5%

- 25 -

REPLACEMENT PARTS LIST

LOCA. NO L1020 L1021 L1022 L1023 L1024 L103 L104 L1106 L1107 L1108 L1109 L111 L1110 L1111 L1112 L1113 L1115 L1116 L1117 L1118 L1119 L112 L1120 L1121 L1122 L1123 L1125 L1126 L1127 L113 L1131 L114 L115 L116 L119 L120 L1204 L1205 L1206 L1207 L1208 L1209 L137 L1501 L1502 L1503 L200 L201 L202 L203 L204 PART NO 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200JB8010L 6200JB8010L 6200J000013 6200J000013 6200J000013 6200J000013 6210VC0005A 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6210VC0005A 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6210VC0005A 6200J000013 6210VC0005A 6210VC0005A 6210VC0005A 6200JB8010L 6200JB8010L 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 DESCRIPTION FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC BK2125 HS 750 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC BK2125 HS 750 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC BK2125 HS 750 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC BK2125 HS 750 FILTER,EMC BK2125 HS 750 FILTER,EMC BK2125 HS 750 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 A1 A2 A3 A7 C1 C2 C3 IC1 IC900 PA101 TU200 TU201 X800 LOCA. NO L300 L301 L400 L401 L402 L403 L406 L407 L408 L500 L501 L502 L503 L506 L514 L515 L516 L517 L604 L901 L902 R102 R103 R105 R106 X1200 X300 X400 X700 PART NO 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6210VC0005A 6200JB8010L 6200JB8010L 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200JB8010L 6200JB8010L 6200JB8010L 6200JB8010L 6212AB2845A 166-E02F 156-A02M 6212AB2844A DESCRIPTION FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC BK2125 HS 750 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-321611-0500P-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-201209-1000L-N2 FILTER,EMC MLB-201209-1000L-N2 RESONATOR,CRYSTAL ABLS-27.000MHZ RESONATOR,CERAMIC CSBLA500KECZF09-B0 RESONATOR,CRYSTAL HC49U 18.432MHZ RESONATOR,CRYSTAL ABLS-19.6608MHZ

MISCELLANEOUS
6850VA0004H 6851V00022B 6850J00005B 6927V1294AA 6927V1293AA 6712000010A 6700NF0020B 6700NF0020A 6212AB2844A CABLE,COAXIAL(NTSC PLUG) UL1365AWG26 CABLE,COAXIAL(100MM),UL1365#26 VW-1 CABLE,DVI LVDS UL20276 AWG30 500MM SOFT WARE,2.00V 18B5 PDP RF052C SOFT WARE,2.00V 1584 PDP RF052C REMOTE CONTROLLER RECEIVER,38KHZ TUNER,TAFM-H102P TUNER,TAUM-H101P RESONATOR,CRYSTAL ABLS-19.6608MHZ

ACCESSORIES
3828VA0542E 3828VA0542C 6710V00141H 6410VTH004A 6410VEH003C 6410VUH005C 4972V00178A MANUAL,OWNERS RF052C LGETT MANUAL,OWNERS RF052C LGECM REMOTE CONTROLLER,RF052C POWER CORD,TW15CS3+V1625 2800MM POWER CORD *LGECM POWER CORD *LGECM FIXER,WALL NON ASSY PDP SET

- 26 -

P/NO : 3828VD0224K

April., 2005 Printed in Korea

MAIN(TOP)

MAIN(BOTTOM) RCA(TOP)

RCA(BOTTOM)

SIDE A/V(TOP)

SIDE A/V(BOTTOM)

CONTROL(TOP)

CONTROL(BOTTOM)