Scribd
Upload
13 views1 page

IoT Lab - Components

The document lists the components required for the IoT Lab and EXTC components at VIVA Institute of Technology. It includes quantities for various electronic items such as Arduino boards, sensors, and jumper wires. The document serves as a comprehensive inventory for the respective labs.

Uploaded by

Nutan Malekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views1 page

IoT Lab - Components

The document lists the components required for the IoT Lab and EXTC components at VIVA Institute of Technology. It includes quantities for various electronic items such as Arduino boards, sensors, and jumper wires. The document serves as a comprehensive inventory for the respective labs.

Uploaded by

Nutan Malekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Vishnu Waman Thakur Charitable Trust’s

VIVA Institute of Technology


Shirgaon, Virar (East), Dist: Palghar-401305, Maharashtra
Website: www.viva-technology.org

Department of Electronics and Telecommunication Engineering

IoT Lab Components List

1. Arduino UNO board with USB Cable =8


2. Bread Board (800 points) =8
3. LED (5 mm) = 10
4. Resistor (330 Ω, ¼ W, ±1%) = 10
5. Potentiometer (10 k Ω) =8
6. Ultrasonic Module =8
7. Infrared Sensor Module =8
8. Servo Motor (SG-90) =8
9. Bluetooth Module (HC-05) =8
10. WiFi Module (ESP8266) =8
11. Arduino Jumper Wires (Male- Male) = 150
12. Arduino Jumper Wires (Male-Female) = 150

For EXTC Components List

1. Raspberry pi pico =4
2. Raspberry pi 4 model b - 8gb RAM =2
3. Memory Card =2
4. Arduino UNO board with USB Cable =5
5. Raspberry PI 5MP Camera Board Module =2
6. MSP430G2553 LaunchPad =5
7. STM32F103C8T6 Blue Pill board =2
8. USB-TTL Converter or FTDI for Blue Pill =2
(Mini USB to TTL FTDI Adapter Module)
9. LDR Module =5
10. Infrared Sensor Module =5
11. MAX30100 Heart Rate Oximeter Sensor Module = 2
12. GY-906 MLX90614 Non-Contact IR Infrared
Temperature Sensor Module =2
13. Arduino Jumper Wires (Male- Male) = 400
14. Arduino Jumper Wires (Male-Female) = 400

You might also like