Scribd
Upload
11 views3 pages

Session 113MT-Control Configuration Review

This document outlines the steps for configuring the VERICUT control file to run a simulation in Session 113MT. It describes the initial setup, the need to troubleshoot and configure the control based on NC codes, and provides reference materials for assistance. The session includes running the simulation and addressing any errors that arise during the process.

Uploaded by

Diogenes Cardoso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views3 pages

Session 113MT-Control Configuration Review

This document outlines the steps for configuring the VERICUT control file to run a simulation in Session 113MT. It describes the initial setup, the need to troubleshoot and configure the control based on NC codes, and provides reference materials for assistance. The session includes running the simulation and addressing any errors that arise during the process.

Uploaded by

Diogenes Cardoso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Session 113MT

Control configuration review


This session will ask you to configure the VERICUT control file in order to run the
simulation. This session starts with a VERICUT project which has the job-related data
already setup, a Machine already configured, but to have VERICUT process the NC
Program you will need to configure the Control.

The Welcome Screen has opened file


millturn_session_113mt_control_configuration_review.vcproject

VERICUT V9.3 Session 113MT 1


1. Run the simulation
Notice that the simulation does not behave as expected and that VERICUT is outputting
errors in the Logger

2. Configure the control


Use the control configuration knowledge you obtained in this class, your
understanding of NC codes and how the NC machine behaves with those codes, and
the reference material to troubleshoot and configure the control to properly simulate
the supplied NC Program.

Reference material:
• CGTech Library "starter" controls
• VERICUT help
• M107 / M108 B Rotary lock / unlock
• M08 / M09 Coolant on / off
• G20 / G21 Inch / Metric

VERICUT V9.3 Session 113MT 2


3. Run the simulation

VERICUT V9.3 Session 113MT 3

You might also like