Scribd
Upload
12 views3 pages

Session 113L-Control Configuration Review

Session 113L focuses on configuring the VERICUT control file to successfully run a simulation using a pre-set project. Participants will troubleshoot errors in the simulation by applying their knowledge of NC codes and utilizing reference materials. The session culminates in running the simulation after proper control configuration is completed.

Uploaded by

Diogenes Cardoso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views3 pages

Session 113L-Control Configuration Review

Session 113L focuses on configuring the VERICUT control file to successfully run a simulation using a pre-set project. Participants will troubleshoot errors in the simulation by applying their knowledge of NC codes and utilizing reference materials. The session culminates in running the simulation after proper control configuration is completed.

Uploaded by

Diogenes Cardoso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Session 113L

Control configuration review


This session will ask you to configure the VERICUT control file in order to run the
simulation. This session starts with a VERICUT project which has the job-related data
already setup, a Machine already configured, but to have VERICUT process the NC
Program you will need to configure the Control.

The Welcome Screen has opened file


lathe_session_113l_control_configuration_review.vcproject

VERICUT V9.3 Session 113L 1


1. Run the simulation
Notice that the simulation does not behave as expected and that VERICUT is outputting
errors in the Logger

2. Configure the control


Use the control configuration knowledge you obtained in this class, your
understanding of NC codes and how the NC machine behaves with those codes, and
the reference material to troubleshoot and configure the control to properly simulate
the supplied NC Program.

Reference material:
• CGTech Library "starter" controls
• VERICUT help
• G20 / G21 Inch / Metric

VERICUT V9.3 Session 113L 2


3. Run the simulation

VERICUT V9.3 Session 113L 3

You might also like