Scribd
Upload
38 views1 page

Detailed Civil 3d Installation

The document provides instructions for configuring the LMTOOLS utility by noting the HOSTNAME and MAC Address. It details how to edit the lic.dat file to replace placeholders with the noted values and emphasizes saving the file in a suggested directory. The document ensures that the MAC address is formatted correctly and advises against changing the predefined PORT number unless instructed.

Uploaded by

Perso Comme
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
38 views1 page

Detailed Civil 3d Installation

The document provides instructions for configuring the LMTOOLS utility by noting the HOSTNAME and MAC Address. It details how to edit the lic.dat file to replace placeholders with the noted values and emphasizes saving the file in a suggested directory. The document ensures that the MAC address is formatted correctly and advises against changing the predefined PORT number unless instructed.

Uploaded by

Perso Comme
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

1. Open the LMTOOLS utility (kitam nakasali dita crack).

Go to the System Settings tab.

Look for the HOSTNAME (host ID) and MAC Address (Ethernet Address) listed there.

Note these values down.kopyaem kasla d2y example d2y baba

2. Edit the lic.dat File


Open the lic.dat file in a text editor (e.g., Notepad on Windows, or any code
editor like VS Code).

Look for lines that specify the HOSTNAME and MAC address. These lines typically
look like this:

SERVER <HOSTNAME> <MAC> <PORT>

Example:
SERVER mycomputer 0123456789AB 27000

Replace the <HOSTNAME> and <MAC> placeholders with the values you noted earlier.

Ensure the MAC address is entered without colons or dashes (e.g., 0123456789AB).

The PORT number is usually predefined (e.g., 27000), so don't change it unless
instructed.

3. Save the File


Save the changes to the lic.dat file.
agaramid k folder na
Save lic.dat where you want (we suggest to "C:\Autodesk\Network License Manager"
folder)

You might also like