Scribd
Upload
4 views5 pages

Code Led 7

The document contains C code for a main program that initializes and configures a microcontroller, specifically for handling GPIO and timer interrupts. It includes functionality to toggle an LED and count button presses, displaying the count on a 7-segment display. The program also includes error handling and system clock configuration routines.

Uploaded by

daovietdung3003
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
4 views5 pages

Code Led 7

The document contains C code for a main program that initializes and configures a microcontroller, specifically for handling GPIO and timer interrupts. It includes functionality to toggle an LED and count button presses, displaying the count on a 7-segment display. The program also includes error handling and system clock configuration routines.

Uploaded by

daovietdung3003
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

/* USER CODE BEGIN Header */

/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"

/* Private includes ----------------------------------------------------------*/


/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/


/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/


/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/


/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/


void SystemClock_Config(void);
static void MX_GPIO_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/


/* USER CODE BEGIN 0 */

/* USER CODE END 0 */


/**
* @brief The application entry point.
* @retval int
*/
void TIM2_IRQHandler(void)
{
GPIOA ->ODR ^= (1<<0);
}
unsigned char LED [10]={0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F };
void data_IC59 (unsigned char dataIC);
int main(void)
{

/* USER CODE BEGIN 1 */


unsigned int state_1=1;
RCC->APB1ENR |= (1<<0); // clk TIM2
RCC->APB2ENR |= (1<<2);
GPIOA -> CRL |= (1<<0) | (1<<4) | (1<<8);
TIM2->PSC = 159;
TIM2->ARR = 9999;
TIM2->CR1 |= (1<<0);
TIM2->DIER |= (1<<0);
NVIC-> ISER[0] |= (1<<28);
while(1)
{

}
/*while(1)
{
if((GPIOA -> IDR&(1<<1))==0)
GPIOA ->ODR |= (1<<2);
else
GPIOA ->ODR &=~ (1<<2);
}*/
unsigned char tram,chuc,dv;
int dem=0;

while(1)
{
if ((GPIOA->IDR&(1<<1))==0&& state_1==0)
{dem++; state_1 =1;}// dang nhan
else if ((GPIOA->IDR &(1<<1))==(1<<1)&& state_1==1)
state_1=0; // chua nhan
tram=dem/100;
chuc=(dem%100)/10;
dv=dem%100%10;
data_IC59(LED[dv]);
data_IC59(LED[chuc]);
data_IC59(LED[tram]);
//LAT clock PB2
GPIOB-> ODR|=(1<<2); // logic 1 PB2
GPIOB-> ODR &=~(1<<2); // logic 0 PB2
}
/* USER CODE END 1 */

/* MCU Configuration--------------------------------------------------------*/

/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* USER CODE BEGIN Init */

/* USER CODE END Init */

/* Configure the system clock */


SystemClock_Config();

/* USER CODE BEGIN SysInit */

/* USER CODE END SysInit */

/* Initialize all configured peripherals */


MX_GPIO_Init();
/* USER CODE BEGIN 2 */

/* USER CODE END 2 */

/* Infinite loop */
/* USER CODE BEGIN WHILE */
/*while (1)
{}*/
/* USER CODE END WHILE */

/* USER CODE BEGIN 3 */

/* USER CODE END 3 */


}
void data_IC59 (unsigned char dataIC)
{
for (char i = 0; i < 8; i++)
{ // data to IC, PB1
if ((dataIC & (1<<(7-i)))== 0)
GPIOB->ODR &= ~(1<<1); // logic 0
else GPIOB->ODR |= (1<<1); // logic 1
// clock PB0
GPIOB->ODR |=(1<<0);
GPIOB->ODR &=~(1<<0);
}

/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

/** Initializes the RCC Oscillators according to the specified parameters


* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}

/** Initializes the CPU, AHB and APB buses clocks


*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)


{
Error_Handler();
}
}

/**
* @brief GPIO Initialization Function
* @param None
* @retval None
*/
static void MX_GPIO_Init(void)
{
/* USER CODE BEGIN MX_GPIO_Init_1 */
/* USER CODE END MX_GPIO_Init_1 */

/* GPIO Ports Clock Enable */


__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();

/* USER CODE BEGIN MX_GPIO_Init_2 */


/* USER CODE END MX_GPIO_Init_2 */
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}

#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

You might also like