0% found this document useful (0 votes)
2 views

patch

The document details the configuration and status of a Huawei S5731-S24P4X Routing Switch, including software version, memory sizes, and interface settings. It also highlights security warnings regarding the use of FTP and the need for user interface configuration changes. Additionally, it captures command inputs and outputs related to user authentication and interface management.
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2 views

patch

The document details the configuration and status of a Huawei S5731-S24P4X Routing Switch, including software version, memory sizes, and interface settings. It also highlights security warnings regarding the use of FTP and the need for user interface configuration changes. Additionally, it captures command inputs and outputs related to user authentication and interface management.
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 19

Login authentication

Password:
Warning: There is a risk on the user-interface which you login through. Please c
hange the configuration of the user-interface as soon as possible.

Info: Smart-upgrade is currently disabled. Enable Smart-upgrade to get recommend


ed version information.
<HUAWEI>sh
<HUAWEI>sho
<HUAWEI>di
<HUAWEI>dis
<HUAWEI>display ver
<HUAWEI>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5731 V200R021C00SPC100)
Copyright (C) 2000-2021 HUAWEI TECH Co., Ltd.
HUAWEI S5731-S24P4X Routing Switch uptime is 0 week, 0 day, 0 hour, 47 minutes

ES5D2V28C010 0(Master) : uptime is 0 week, 0 day, 0 hour, 46 minutes


DDR Memory Size : 4096 M bytes
FLASH Total Memory Size : 1024 M bytes
FLASH Available Memory Size : 739 M bytes
Pcb Version : VER.A
MAB Version : 0
BootROM Version : 0000.051a
BootLoad Version : 0215.0000
CPLD Version : 0103
MCU Version : 1.13.0.4
Software Version : VRP (R) Software, Version 5.170 (V200R021C00SPC100)
FLASH Version : 0000.0000
PWR1 information
Pcb Version : PWR VER.A
FAN1 information
Pcb Version : NA
FAN2 information
Pcb Version : NA
<HUAWEI>dis
<HUAWEI>display pa
<HUAWEI>display pat
<HUAWEI>display patch-information
Info: No patch exists.
The state of the patch state file is: Idle
The current state is: Idle
<HUAWEI>display patch-information
Info: No patch exists.
The state of the patch state file is: Idle
The current state is: Idle
<HUAWEI>dsi
<HUAWEI>dis
<HUAWEI>display ver
<HUAWEI>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5731 V200R021C00SPC100)
Copyright (C) 2000-2021 HUAWEI TECH Co., Ltd.
HUAWEI S5731-S24P4X Routing Switch uptime is 0 week, 0 day, 0 hour, 49 minutes

ES5D2V28C010 0(Master) : uptime is 0 week, 0 day, 0 hour, 48 minutes


DDR Memory Size : 4096 M bytes
FLASH Total Memory Size : 1024 M bytes
FLASH Available Memory Size : 739 M bytes
Pcb Version : VER.A
MAB Version : 0
BootROM Version : 0000.051a
BootLoad Version : 0215.0000
CPLD Version : 0103
MCU Version : 1.13.0.4
Software Version : VRP (R) Software, Version 5.170 (V200R021C00SPC100)
FLASH Version : 0000.0000
PWR1 information
Pcb Version : PWR VER.A
FAN1 information
Pcb Version : NA
FAN2 information
Pcb Version : NA
<HUAWEI>display patch-information
Info: No patch exists.
The state of the patch state file is: Idle
The current state is: Idle
<HUAWEI>
<HUAWEI>ft
<HUAWEI>ftp ser
<HUAWEI>ftp ser
<HUAWEI>sy
<HUAWEI>system-view
Enter system view, return user view with Ctrl+Z.
[HUAWEI]ft
[HUAWEI]ftp ser
[HUAWEI]ftp server e
[HUAWEI]ftp server enable
Warning: FTP is not a secure protocol, and it is recommended to use SFTP.
Info: Succeeded in starting the FTP server.
Warning: After configuring the source interface or source address, the listening
socket will be created.
[HUAWEI]
Nov 11 2024 08:18:49 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 1, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI]aaa
[HUAWEI-aaa]loca
[HUAWEI-aaa]local-us
[HUAWEI-aaa]local-user admin123 ci
[HUAWEI-aaa]local-user admin123 ?
access-limit Set access limit of user(s)
expire-date The local user expire date
ftp-directory Set user(s) FTP directory permitted (maximum directory length
is 64)
ftp-privilege Set user(s) FTP privilege
http-directory Set user(s) HTTP directory permitted (maximum directory
length is 64)
idle-timeout Set the timeout period for terminal user(s)
password Set password
privilege Set admin user(s) level
service-type Service types for authorized user(s)
state Activate/Block the user(s)
time-range The time-range of local user
user-type User type
[HUAWEI-aaa]local-user admin123 pas
[HUAWEI-aaa]local-user admin123 password ?
cipher User password with cipher text
irreversible-cipher User password with irreversible-cipher text
<cr>

[HUAWEI-aaa]local-user admin123 password c


[HUAWEI-aaa]local-user admin123 password cipher admin123
Error: The password cannot be the same as a user name or an inverted user name.
[HUAWEI-aaa]
[HUAWEI-aaa]adm
[HUAWEI-aaa]loca
[HUAWEI-aaa]local-use
[HUAWEI-aaa]local-user admin123 pr
[HUAWEI-aaa]local-user admin123 privilege ?
level Set admin user(s) level

[HUAWEI-aaa]local-user admin123 privilege le


[HUAWEI-aaa]local-user admin123 privilege level 15
Info: Add a new user.
[HUAWEI-aaa]local-user admin123 privilege level 15
Nov 11 2024 08:19:49 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 2, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI-aaa]local-user admin123 privilege ?
level Set admin user(s) level

[HUAWEI-aaa]local-user admin123 ?
access-limit Set access limit of user(s)
expire-date The local user expire date
ftp-directory Set user(s) FTP directory permitted (maximum directory length
is 64)
ftp-privilege Set user(s) FTP privilege
http-directory Set user(s) HTTP directory permitted (maximum directory
length is 64)
idle-timeout Set the timeout period for terminal user(s)
password Set password
privilege Set admin user(s) level
service-type Service types for authorized user(s)
state Activate/Block the user(s)
time-range The time-range of local user
user-type User type

[HUAWEI-aaa]local-user admin123 ft
[HUAWEI-aaa]local-user admin123 ftp-
[HUAWEI-aaa]local-user admin123 ftp-directory
[HUAWEI-aaa]local-user admin123 ftp-privilege
[HUAWEI-aaa]local-user admin123 ftp-directory
[HUAWEI-aaa]local-user admin123 ftp-privilege ?
STRING [drive][path][file name]
execute Execute privilege
flash: Device name
read Read privilege
write Write privilege

[HUAWEI-aaa]local-user admin123 ser


[HUAWEI-aaa]local-user admin123 service-type f
[HUAWEI-aaa]local-user admin123 service-type ftp ?
8021x 802.1x user
api Api user
http HTTP user
ppp PPP user
ssh SSH user
telnet Telnet user
terminal Terminal user
web WEB authentication user
x25-pad X25-pad user
<cr>

[HUAWEI-aaa]local-user admin123 service-type ftp t


[HUAWEI-aaa]local-user admin123 service-type ftp te
[HUAWEI-aaa]local-user admin123 service-type ftp terminal
[HUAWEI-aaa]local-user admin123 service-type ftp telnet
[HUAWEI-aaa]local-user admin123 service-type ftp te
[HUAWEI-aaa]local-user admin123 service-type ftp telnet
[HUAWEI-aaa]local-user admin123 service-type ft
[HUAWEI-aaa]local-user admin123 service-type ftp ?
8021x 802.1x user
api Api user
http HTTP user
ppp PPP user
ssh SSH user
telnet Telnet user
terminal Terminal user
web WEB authentication user
x25-pad X25-pad user
<cr>

[HUAWEI-aaa]local-user admin123 service-type ftp ss


[HUAWEI-aaa]local-user admin123 service-type ftp ssh
Warning: The user access modes include Telnet, FTP, or HTTP, so security risks
exist.
Info: After changing the rights (including the password, access type, FTP
directory, HTTP directory, and level) of a local user, the rights of users already
online do not change. The change takes effect to users who go online after the
change.
[HUAWEI-aaa]
Nov 11 2024 08:21:09 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 3, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI-aaa]q
[HUAWEI]int
[HUAWEI]interface gi
[HUAWEI]interface GigabitEthernet ?
<0-0> GigabitEthernet interface slot number

[HUAWEI]interface GigabitEthernet 0/0/1


[HUAWEI-GigabitEthernet0/0/1]ip ad
[HUAWEI-GigabitEthernet0/0/1]ip ad
[HUAWEI-GigabitEthernet0/0/1]?
gigabitethernet-l2 interface view commands:
als Set automatic laser shutdown
am Unidirectional isolation
arp Address Resolution Protocol
arp-fake ARP fake entry
arp-limit Limit the number of learnt ARP
arp-miss ARP Miss
authentication Authentication
authentication-profile Authentication profile
auto Auto negotiates port mode
bandwidth Specify mib-referenced bandwidth of the
interface
broadcast-suppression Set broadcast flow suppression
cable-snr-test Cable SNR test
carrier Set carrier function
cfm Connectivity fault management
check Check
clear Clear
collect Collect
combo-port Set combo type
configuration Configuration interlock
dei Specify dei as drop precedence
description Specify interface description
dhcp Dynamic host configure protocol
dhcpv6 Dynamic host configure protocol for IPv6
display Display current system information
dldp Device link detection protocol
dns Domain name system
dot1x-client-profile Dot1x client profile
duplex Configure duplex operation mode
ec-analytics Specify Encrypted Communication Analytics
efm Operation, Administration and Maintenance (OAM)
in the First Mile of Ethernet (EFM), which is
defined in the 802.3ah
enable Enable function
erps Ethernet ring protection switching
error-down-threshold Set error-down threshold
error-statistics Error-statistics
eth-trunk Add the interface into eth-trunk
flow-control Configure flow-control operation mode
garp Generic Attribute Registration Protocol
gvrp Generic VLAN Registration Protocol
host-car Host car
igmp-snooping Specify parameters for IGMP-Snooping
ip IP packet
ip-subnet-vlan Vlan assignment based on IP subnet
ipfpm Enable IPFPM (IP Flow Performance Measurement)
function
iplpm Specify IPLPM (IP Local Performance Monitor)

[HUAWEI-GigabitEthernet0/0/1]ip
[HUAWEI-GigabitEthernet0/0/1]ip-subnet-vlan
[HUAWEI-GigabitEthernet0/0/1]iplpm
[HUAWEI-GigabitEthernet0/0/1]ipv4
[HUAWEI-GigabitEthernet0/0/1]ipv6
[HUAWEI-GigabitEthernet0/0/1]ip ?
netstream Netstream feature
source Source

[HUAWEI-GigabitEthernet0/0/1]ip s
[HUAWEI-GigabitEthernet0/0/1]q
[HUAWEI]interface GigabitEthernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1]und
[HUAWEI-GigabitEthernet0/0/1]undo por
[HUAWEI-GigabitEthernet0/0/1]undo port s
[HUAWEI-GigabitEthernet0/0/1]undo ports
[HUAWEI-GigabitEthernet0/0/1]undo portswitch
[HUAWEI-GigabitEthernet0/0/1]ip ad
[HUAWEI-GigabitEthernet0/0/1]ip address 192.168.
Nov 11 2024 08:22:59 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 4, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI-GigabitEthernet0/0/1]ip address 192.168.1.1 24
Error: The specified address conflicts with another address.
[HUAWEI-GigabitEthernet0/0/1]ip address 192.168.2.1 24
Error: The specified address conflicts with another address.
[HUAWEI-GigabitEthernet0/0/1]ip address 192.168.10.1 24
[HUAWEI-GigabitEthernet0/0/1]und
[HUAWEI-GigabitEthernet0/0/1]undo sh
[HUAWEI-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[HUAWEI-GigabitEthernet0/0/1]
Nov 11 2024 08:23:19 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 5, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI-GigabitEthernet0/0/1]
Nov 11 2024 08:25:28 HUAWEI %%01IFADP/4/PORTUPINFO(l)[0]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: yes, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
[HUAWEI-GigabitEthernet0/0/1]
Nov 11 2024 08:25:29 HUAWEI LLDP/4/NBRCHGTRAP:OID 1.0.8802.1.1.2.0.0.1 Neighbor
information is changed. (LldpStatsRemTablesInserts=1, LldpStatsRemTablesDeletes=1,
LldpStatsRemTablesDrops=0, LldpStatsRemTablesAgeouts=0)
Nov 11 2024 08:25:30 HUAWEI %%01IFPDT/4/IF_STATE(l)[1]:Interface
GigabitEthernet0/0/2 has turned into UP state.
Nov 11 2024 08:25:30 HUAWEI %%01IFNET/4/IF_STATE(l)[2]:Interface Vlanif20 has
turned into UP state.
Nov 11 2024 08:25:30 HUAWEI %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP on
the interface Vlanif20 has entered the UP state.
[HUAWEI-GigabitEthernet0/0/1]
Nov 11 2024 08:25:30 HUAWEI LLDP/4/NBRCHGTRAP:OID 1.0.8802.1.1.2.0.0.1 Neighbor
information is changed. (LldpStatsRemTablesInserts=1, LldpStatsRemTablesDeletes=0,
LldpStatsRemTablesDrops=0, LldpStatsRemTablesAgeouts=0)
[HUAWEI-GigabitEthernet0/0/1]
Nov 11 2024 08:25:34 HUAWEI %%01MSTP/4/SET_PORT_FORWARDING(l)[4]:In MSTP process 0
instance 0, MSTP set port GigabitEthernet0/0/2 state as forwarding.
[HUAWEI-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[HUAWEI-GigabitEthernet0/0/1]aaa
[HUAWEI-aaa]dis
[HUAWEI-aaa]display thi
#
aaa
authentication-scheme default
authentication-mode local
authentication-scheme radius
authentication-mode radius
authorization-scheme default
authorization-mode local
accounting-scheme default
accounting-mode none
local-aaa-user password policy administrator
password history record number 0
password expire 0
domain default
authentication-scheme radius
accounting-scheme default
radius-server default
domain default_admin
authentication-scheme default
accounting-scheme default
local-user admin123 privilege level 15
local-user admin123 service-type ssh ftp
#
return
[HUAWEI-aaa]loc
[HUAWEI-aaa]local-uis
[HUAWEI-aaa]local-us
[HUAWEI-aaa]local-user admin123 ft
[HUAWEI-aaa]local-user admin123 ftp-di
[HUAWEI-aaa]local-user admin123 ftp-directory fl
[HUAWEI-aaa]local-user admin123 ftp-directory flash:
Info: The configured FTP path must be an absolute path, for example, flash:/ftp.
Info: After changing the rights (including the password, access type, FTP
directory, HTTP directory, and level) of a local user, the rights of users already
online do not change. The change takes effect to users who go online after the
change.
[HUAWEI-aaa]loca
[HUAWEI-aaa]local-user
[HUAWEI-aaa]local-user
Nov 11 2024 08:27:29 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 6, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI-aaa]local-user admin123 pas
[HUAWEI-aaa]local-user admin123 password ir
[HUAWEI-aaa]local-user admin123 password irreversible-cipher ahsan123
Info: After changing the rights (including the password, access type, FTP
directory, HTTP directory, and level) of a local user, the rights of users already
online do not change. The change takes effect to users who go online after the
change.
[HUAWEI-aaa]
Nov 11 2024 08:27:47 HUAWEI AAA/4/ChangePasswordAlarm:OID
1.3.6.1.4.1.2011.5.2.2.2.0.112 Local account password has been modified.(TYPE:--
User-name:admin123)
[HUAWEI-aaa]
Nov 11 2024 08:27:49 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 7, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI-aaa]dis
[HUAWEI-aaa]display thi
#
aaa
authentication-scheme default
authentication-mode local
authentication-scheme radius
authentication-mode radius
authorization-scheme default
authorization-mode local
accounting-scheme default
accounting-mode none
local-aaa-user password policy administrator
password history record number 0
password expire 0
domain default
authentication-scheme radius
accounting-scheme default
radius-server default
domain default_admin
authentication-scheme default
accounting-scheme default
local-user admin123 password irreversible-cipher $1c$M[9O)}/,VV$Cp:!
Z74$2Vw7$YM+Esl~bat;"P~oOIOHLW&x^"\)$
local-user admin123 privilege level 15
local-user admin123 ftp-directory flash:
local-user admin123 service-type ssh ftp
#
return
[HUAWEI-aaa]q
[HUAWEI]dis cu | o ftp
^
Error: Unrecognized command found at '^' position.
[HUAWEI]dis cu | o ftp
^
Error: Unrecognized command found at '^' position.
[HUAWEI]dis cu | i ftp
local-user admin123 ftp-directory flash:
local-user admin123 service-type ssh ftp
[HUAWEI]ftp ser
[HUAWEI]ftp server e
[HUAWEI]ftp server enable
Info: The FTP server is already enabled.
[HUAWEI]ftp ser
[HUAWEI]ftp server p
[HUAWEI]ftp server port
[HUAWEI]ftp server
[HUAWEI]ftp server-source ?
-a Set the FTP server Loopback source address
-i Set a source interface of FTP server
all-interface Bind all interfaces

[HUAWEI]ftp server-source al
[HUAWEI]ftp server-source all-interface
Warning: To make the server source configuration take effect, the FTP server will
be restarted. Continue? [Y/N]:y
Warning: It expandes the range of accessed Ip.
Info: Succeeded in starting the FTP server.
[HUAWEI]
[HUAWEI]
[HUAWEI]
[HUAWEI]
Nov 11 2024 08:28:59 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 8, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI]
[HUAWEI]
[HUAWEI]
[HUAWEI]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
(E): E-Trunk down
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 5
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 5

Interface IP Address/Mask Physical Protocol


GigabitEthernet0/0/1 192.168.10.1/24 down down
MEth0/0/1 192.168.1.253/24 down down
NULL0 unassigned up up(s)
Vlanif1 unassigned down down
Vlanif10 192.168.2.1/24 down down
Vlanif20 10.10.10.1/29 up up
Vlanif30 10.10.20.1/30 down down

[HUAWEI]
[HUAWEI]
[HUAWEI]
[HUAWEI]
[HUAWEI]
[HUAWEI]int g0/0/2
[HUAWEI-GigabitEthernet0/0/2]int g0/0/1
[HUAWEI-GigabitEthernet0/0/1]dis th
#
interface GigabitEthernet0/0/1
undo portswitch
ip address 192.168.10.1 255.255.255.0
#
return
[HUAWEI-GigabitEthernet0/0/1]undo ip add
[HUAWEI-GigabitEthernet0/0/1]int
Nov 11 2024 08:31:19 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 9, the change loop count is 0, and the maximum number of records is 4095.
[HUAWEI-GigabitEthernet0/0/1]int g0/0/2
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]undo
[HUAWEI-GigabitEthernet0/0/2]undo pors
[HUAWEI-GigabitEthernet0/0/2] undo portswitch
Error: Please delete the existing non-default configurations on the interface
first.
[HUAWEI-GigabitEthernet0/0/2] ip address 192.168.10.1 255.255.255.0
^
Error: Unrecognized command found at '^' position.
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]dis th\
^
Error: Unrecognized command found at '^' position.
[HUAWEI-GigabitEthernet0/0/2]dis th
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 20
#
return
[HUAWEI-GigabitEthernet0/0/2]undo port link
[HUAWEI-GigabitEthernet0/0/2]undo port link-t
[HUAWEI-GigabitEthernet0/0/2]undo port link-type
Warning: This command will delete VLANs on this port. Continue?[Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment...done.
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
Nov 11 2024 08:31:52 HUAWEI %%01IFNET/4/IF_STATE(l)[5]:Interface Vlanif20 has
turned into DOWN state.
Nov 11 2024 08:31:52 HUAWEI %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP on
the interface Vlanif20 has entered the DOWN state.
Nov 11 2024 08:31:52 HUAWEI %%01IFNET/4/IF_STATE(l)[7]:Interface Vlanif1 has turned
into UP state.
Nov 11 2024 08:31:52 HUAWEI %%01MSTP/4/SET_PORT_FORWARDING(l)[8]:In MSTP process 0
instance 0, MSTP set port GigabitEthernet0/0/2 state as forwarding.
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]dis t
^
Error:Ambiguous command found at '^' position.
[HUAWEI-GigabitEthernet0/0/2]dis th
#
interface GigabitEthernet0/0/2
#
return
[HUAWEI-GigabitEthernet0/0/2]
Nov 11 2024 08:31:59 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 10, the change loop count is 0, and the maximum number of records is
4095.
[HUAWEI-GigabitEthernet0/0/2] undo portswitch
Nov 11 2024 08:32:00 HUAWEI %%01IFNET/4/IF_STATE(l)[9]:Interface Vlanif1 has turned
into DOWN state.
Nov 11 2024 08:32:01 HUAWEI LLDP/4/NBRCHGTRAP:OID 1.0.8802.1.1.2.0.0.1 Neighbor
information is changed. (LldpStatsRemTablesInserts=0, LldpStatsRemTablesDeletes=1,
LldpStatsRemTablesDrops=0, LldpStatsRemTablesAgeouts=0)
Nov 11 2024 08:32:01 HUAWEI %%01IFPDT/4/IF_STATE(l)[10]:Interface
GigabitEthernet0/0/2 has turned into DOWN state.
Nov 11 2024 08:32:01 HUAWEI %%01IFADP/4/PORTDOWNINFO(l)[11]:Interface
GigabitEthernet0/0/2 has turned into DOWN state. (Information=Physical state: down,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: no, 100M: no, 1000M: no), Remote half-duplex(10M: no, 100M: no, 1000M:
no))
[HUAWEI-GigabitEthernet0/0/2] ip address 192.168.10.1 255.255.255.0
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]dis th
#
interface GigabitEthernet0/0/2
undo portswitch
ip address 192.168.10.1 255.255.255.0
#
return
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
Nov 11 2024 08:32:05 HUAWEI %%01IFADP/4/PORTUPINFO(l)[12]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: yes, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: yes), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]
[HUAWEI-GigabitEthernet0/0/2]q
[HUAWEI]
[HUAWEI]
[HUAWEI]
Nov 11 2024 08:32:07 HUAWEI %%01IFPDT/4/IF_STATE(l)[13]:Interface
GigabitEthernet0/0/2 has turned into UP state.
Nov 11 2024 08:32:07 HUAWEI %%01IFNET/4/LINK_STATE(l)[14]:The line protocol IP on
the interface GigabitEthernet0/0/2 has entered the UP state.
[HUAWEI]
[HUAWEI]
[HUAWEI]
Nov 11 2024 08:32:09 HUAWEI DS/4/DATASYNC_CFGCHANGE:OID
1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change
number is 12, the change loop count is 0, and the maximum number of records is
4095.
[HUAWEI]
Nov 11 2024 08:32:10 HUAWEI LLDP/4/NBRCHGTRAP:OID 1.0.8802.1.1.2.0.0.1 Neighbor
information is changed. (LldpStatsRemTablesInserts=1, LldpStatsRemTablesDeletes=0,
LldpStatsRemTablesDrops=0, LldpStatsRemTablesAgeouts=0)
[HUAWEI]
[HUAWEI]
[HUAWEI]
[HUAWEI]dis so
[HUAWEI]q
<HUAWEI>dis
<HUAWEI>display so
<HUAWEI>display sof
<HUAWEI>display in
<HUAWEI>display info-center
Information Center:enabled
Log host:
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size 1024, current buffer size 512,
current messages 50, channel number : 4, channel name : logbuffer
dropped messages 0, overwritten messages 0
Trap buffer:
enabled,max buffer size 1024, current buffer size 256,
current messages 21, channel number:3, channel name:trapbuffer
dropped messages 0, overwritten messages 0
logfile:
channel number : 9, channel name : channel9, language : English
Information timestamp setting:
log - date, trap - date, debug - date millisecond

Sent messages = 2738, Received messages = 3124

IO Reg messages = 0 IO Sent messages = 386

<HUAWEI>display inof
<HUAWEI>display inf
<HUAWEI>display info-center
<HUAWEI>display info-center
<HUAWEI>dis
<HUAWEI>display io
<HUAWEI>display io
<HUAWEI>display s
<HUAWEI>display snmp
<HUAWEI>display snmp-agent
<HUAWEI>display ver
<HUAWEI>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5731 V200R021C00SPC100)
Copyright (C) 2000-2021 HUAWEI TECH Co., Ltd.
HUAWEI S5731-S24P4X Routing Switch uptime is 0 week, 0 day, 1 hour, 14 minutes

ES5D2V28C010 0(Master) : uptime is 0 week, 0 day, 1 hour, 13 minutes


DDR Memory Size : 4096 M bytes
FLASH Total Memory Size : 1024 M bytes
FLASH Available Memory Size : 739 M bytes
Pcb Version : VER.A
MAB Version : 0
BootROM Version : 0000.051a
BootLoad Version : 0215.0000
CPLD Version : 0103
MCU Version : 1.13.0.4
Software Version : VRP (R) Software, Version 5.170 (V200R021C00SPC100)
FLASH Version : 0000.0000
PWR1 information
Pcb Version : PWR VER.A
FAN1 information
Pcb Version : NA
FAN2 information
Pcb Version : NA
<HUAWEI>
<HUAWEI>
<HUAWEI>dir
<HUAWEI>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time FileName
0 -rw- 0 Oct 23 2024 10:31:48 last_startup_software_info.txt
1 drw- - Nov 08 2024 11:34:22 dhcp
2 drw- - Oct 23 2024 10:31:14 user
3 -rw- 5,290 Oct 23 2024 10:32:14 default_ca.cer
4 -rw- 224 Oct 23 2024 10:31:49
current_startup_software_info.txt
5 drw- - Oct 23 2024 10:36:24 sessionlog
6 drw- - Oct 23 2024 10:31:37 security
7 -rw- 5,291 Nov 11 2024 07:28:03 root.cer
8 -rw- 1,403 Oct 23 2024 10:32:20 default_local.cer
9 drw- - Nov 08 2024 09:23:16 logfile
10 -rw- 1,116 Nov 07 2024 13:34:29 vrpcfg.zip
11 -rw- 380 Nov 11 2024 07:27:17 safedata1_readfrompdt.txt
12 drw- - Oct 23 2024 10:31:09 $_user
13 drw- - Oct 23 2024 10:31:25 upgrade-ap
14 drw- - Oct 23 2024 10:31:14 pmdata
15 -rw- 69,369,433 Nov 11 2024 08:45:17 s5735_v600r023sph181.pat
16 drw- - Mar 31 2022 16:54:03 $_install_mod
17 -rw- 836 Nov 11 2024 07:28:06 rr.bak
18 -rw- 836 Nov 11 2024 07:28:06 rr.dat
19 -rw- 386 Nov 11 2024 07:27:17 safedata2_readfrompdt.txt
20 -rw- 1,101 Nov 11 2024 07:27:43 private-data.txt
21 drw- - Oct 23 2024 10:32:11 localuser
22 drw- - Nov 11 2024 07:27:29 default-sdb
23 drw- - Nov 11 2024 07:27:20 update
24 -rw- 157,429,584 Feb 19 2000 23:45:54 s5731-s-v200r021c00spc100.cc
25 drw- - Oct 23 2024 13:16:48 $_backup
26 -rw- 3,277 Nov 11 2024 07:28:03 device.pem
27 -rw- 576 Nov 11 2024 07:27:17 safedata3_readfrompdt.txt
28 drw- - Nov 11 2024 07:27:37 sys_apinfo
29 -rw- 216 Oct 23 2024 10:32:20 ca_config.ini

756,952 KB total (552,768 KB free)

<HUAWEI>patch s5735_v600r023sph181.pat loa


<HUAWEI>patch s5735_v600r023sph181.pat ?
^
Error: Unrecognized command found at '^' position.
<HUAWEI>load
<HUAWEI>st
<HUAWEI>star
<HUAWEI>startup ?
patch Set patch file
saved-configuration Saved-configuration file for system to startup
system-software Config system software for system to startup

<HUAWEI>startup sy
<HUAWEI>startup pa
<HUAWEI>startup patch ?
STRING<5-64> Specify the patch name, in the format of
[drive][file-name](Default drive is flash:/)
flash: Device name

<HUAWEI>startup patch
<HUAWEI>startup patch fl
<HUAWEI>startup patch flash: \s5735_v600r023sph181.pat ?
^
Error:Too many parameters found at '^' position.
<HUAWEI>startup patch flash: s5735_v600r023sph181.pat
^
Error:Too many parameters found at '^' position.
<HUAWEI>startup patch s5735_v600r023sph181.pat
Info: Succeeded in setting main board resource file for system.
<HUAWEI>save
<HUAWEI>save
The current configuration will be written to flash:/vrpcfg.zip.
Are you sure to continue?[Y/N]y
Now saving the current configuration to the slot 0.
Save the configuration successfully.
<HUAWEI>
Nov 11 2024 08:48:05 HUAWEI %%01CFM/4/SAVE(s)[15]:The user chose Y when deciding
whether to save the configuration to the device.
<HUAWEI>reboot
Info: The system is now comparing the configuration, please wait.
Info: If want to reboot with saving diagnostic information, input 'N' and then
execute 'reboot save diagnostic-information'.
System will reboot! Continue?[Y/N]:y
Comparing the firmware versions
The latest firmware version is in use.
Info: System is rebooting, please wait...
Nov 11 2024 08:48:18 HUAWEI %%01CMD/4/REBOOT(s)[16]:The user chose Y when deciding
whether to reboot the system. (Task=co0, Ip=**, VpnName=, User=**)
Nov 11 2024 08:48:18 HUAWEI %%01SRM/4/MSTRSCURST(l)[17]:Master SCU is reset.
Nov 11 2024 08:48:18 HUAWEI %%01SRM/4/RESETREASON(l)[18]:Board reset by VRP command
or net manager, the barcode is: W02230184150.
System reboot at 08:48:19BSBC start...
Core ID:0
NS Forbid:1
SC PAD INFO:0x10011620
SC BOOT CFG:0x33
SC NORESET:[1]0x1e8be8d,[3]0x20000000,[6]0x10d
Boot Area .........................................Backup
CPU reset type .............................InnerWatchDog
CPU Core Frequency ...............................1400MHz
SDRAM memory size ............................... 4Gbytes
SDRAM initializing ..................................Done
sfc init success.
BIOS Version:051A, Date: Jul-20-2021 13:13:38
find new phy
BTFL(num=1 area=0 media=0)
Starting the os kernel
Uncompressing... done, booting...
@@@[ 3.357994] **** Total Boot time: 3357 ms, uncompress initrd cost 2711 ms
****
............entering rc.local..............
UBI device number 3, total 3332 LEBs (846168064 bytes, 806.9 MiB), available 0 LEBs
(0 bytes), LEB size 253952 bytes (248.0 KiB)
Bootloader CMS check result is true
Boot from main bootloader
/

Aug 19 2021, 11:03:15

Last reset type: PowerOn

No need to backup uboot


Press Ctrl+B or Ctrl+E to enter BootLoad menu: 0

Startup information : 1

Read boot file: flash:/s5731-s-v200r021c00spc100.cc

MCU current_version: 0x1d04, file_version: 0x1d04.

Current startup file: flash:/s5731-s-v200r021c00spc100.cc

Info: Checking signature, please wait


Initializing share memory ................................................. done
System total memory is 0x7f400000

CryptDrbg Init: drbg init successfully.

Start to initialize the LSW ...

Initializing the LSW ...................................................... done


Initializing netlink ...................................................... done
Initializing fast netlink ................................................. done
Stack status : enable
ECM Stack status : run

Initializing FSP task begin ...

Initializing DEV module ................................................... done

Initializing hardware system .............................................. done


Begin to start the system ...

Registering IPC and VP callback to platform ............................... done

Initializing VFS ..................................... Done


Checking startup system-software .......................................... done
Reading PAF file .......................................................... done
Initializing VOS monitor ............................. Done
CFM initialization advance ........................... done
Initializing PAT ..................................... Done
Initializing HA ...................................... done
VFS registering to HA ................................ Done

VRP root begin ...


VRP root end
CFG initialization begin ............................. done
CFM initialization begin ............................. done
CLI initialization begin ............................. done
Registering VRP all link command begin ............... Done
Creating task begin ...
Creating task end
Task initialization begin ...
Task initialization end

ECMM status : run


Cmd registering begin ...
Cmd registering end

Task awake begin ...


Task awake end
Recover configuration begin ...
VRP notifies multicore to run......................... done
VRP waits for multicore until ready................... done
Info: The number of multicore processes is 10.

Recover configuration end


Press ENTER to get started.

Login authentication

Password:
Warning: There is a risk on the user-interface which you login through. Please
change the configuration of the user-interface as soon as possible.

Info: Smart-upgrade is currently disabled. Enable Smart-upgrade to get recommended


version information.
<HUAWEI>dis
<HUAWEI>display in
<HUAWEI>display ver
<HUAWEI>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5731 V200R021C00SPC100)
Copyright (C) 2000-2021 HUAWEI TECH Co., Ltd.
HUAWEI S5731-S24P4X Routing Switch uptime is 0 week, 0 day, 0 hour, 1 minute

ES5D2V28C010 0(Master) : uptime is 0 week, 0 day, 0 hour, 0 minute


DDR Memory Size : 4096 M bytes
FLASH Total Memory Size : 1024 M bytes
FLASH Available Memory Size : 739 M bytes
Pcb Version : VER.A
MAB Version : 0
BootROM Version : 0000.051a
BootLoad Version : 0215.0000
CPLD Version : 0103
MCU Version : 1.13.0.4
Software Version : VRP (R) Software, Version 5.170 (V200R021C00SPC100)
FLASH Version : 0000.0000
PWR1 information
Pcb Version : PWR VER.A
FAN1 information
Pcb Version : NA
FAN2 information
Pcb Version : NA
<HUAWEI>
Nov 11 2024 08:51:26 HUAWEI %%01IFNET/4/CARD_ENABLE(l)[0]:Board 0 card 0 has been
available.
Nov 11 2024 08:51:26 HUAWEI %%01IFNET/4/IF_ENABLE(l)[1]:Interface
GigabitEthernet0/0/1 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[2]:Interface
GigabitEthernet0/0/2 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[3]:Interface
GigabitEthernet0/0/3 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[4]:Interface
GigabitEthernet0/0/4 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[5]:Interface
GigabitEthernet0/0/5 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[6]:Interface
GigabitEthernet0/0/6 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[7]:Interface
GigabitEthernet0/0/7 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[8]:Interface
GigabitEthernet0/0/8 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[9]:Interface
GigabitEthernet0/0/9 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[10]:Interface
GigabitEthernet0/0/10 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[11]:Interface
GigabitEthernet0/0/11 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[12]:Interface
GigabitEthernet0/0/12 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[13]:Interface
GigabitEthernet0/0/13 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[14]:Interface
GigabitEthernet0/0/14 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[15]:Interface
GigabitEthernet0/0/15 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[16]:Interface
GigabitEthernet0/0/16 has been available.
<HUAWEI>
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[17]:Interface
GigabitEthernet0/0/17 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[18]:Interface
GigabitEthernet0/0/18 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[19]:Interface
GigabitEthernet0/0/19 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[20]:Interface
GigabitEthernet0/0/20 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[21]:Interface
GigabitEthernet0/0/21 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[22]:Interface
GigabitEthernet0/0/22 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[23]:Interface
GigabitEthernet0/0/23 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[24]:Interface
GigabitEthernet0/0/24 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[25]:Interface
XGigabitEthernet0/0/1 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[26]:Interface
XGigabitEthernet0/0/2 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[27]:Interface
XGigabitEthernet0/0/3 has been available.
Nov 11 2024 08:51:27 HUAWEI %%01IFNET/4/IF_ENABLE(l)[28]:Interface
XGigabitEthernet0/0/4 has been available.
<HUAWEI>
Nov 11 2024 08:51:29 HUAWEI %%01EZOP/3/PROCESS_STOP(l)[29]:Easy-operation upgrade
process has been stopped. (Reason=There is a configuration file in this device)
<HUAWEI>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5731 V200R021C00SPC100)
Copyright (C) 2000-2021 HUAWEI TECH Co., Ltd.
HUAWEI S5731-S24P4X Routing Switch uptime is 0 week, 0 day, 0 hour, 2 minutes

ES5D2V28C010 0(Master) : uptime is 0 week, 0 day, 0 hour, 1 minute


DDR Memory Size : 4096 M bytes
FLASH Total Memory Size : 1024 M bytes
FLASH Available Memory Size : 739 M bytes
Pcb Version : VER.A
MAB Version : 0
BootROM Version : 0000.051a
BootLoad Version : 0215.0000
CPLD Version : 0103
MCU Version : 1.13.0.4
Software Version : VRP (R) Software, Version 5.170 (V200R021C00SPC100)
FLASH Version : 0000.0000
PWR1 information
Pcb Version : PWR VER.A
FAN1 information
Pcb Version : NA
FAN2 information
Pcb Version : NA
<HUAWEI>dis
<HUAWEI>display pat
<HUAWEI>display patch-information
Info: No patch exists.
The state of the patch state file is: Idle
The current state is: Idle
<HUAWEI>
Nov 11 2024 08:52:43 HUAWEI %%01IFADP/4/PORTUPINFO(l)[30]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
Nov 11 2024 08:52:43 HUAWEI %%01IFADP/4/PORTDOWNINFO(l)[31]:Interface
GigabitEthernet0/0/2 has turned into DOWN state. (Information=Physical state: down,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
<HUAWEI>
Nov 11 2024 08:53:04 HUAWEI %%01IFADP/4/PORTUPINFO(l)[32]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: yes, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
<HUAWEI>
Nov 11 2024 08:53:04 HUAWEI %%01IFADP/4/PORTDOWNINFO(l)[33]:Interface
GigabitEthernet0/0/2 has turned into DOWN state. (Information=Physical state: down,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
<HUAWEI>
Nov 11 2024 08:53:24 HUAWEI %%01IFADP/4/PORTUPINFO(l)[34]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
Nov 11 2024 08:53:24 HUAWEI %%01IFADP/4/PORTDOWNINFO(l)[35]:Interface
GigabitEthernet0/0/2 has turned into DOWN state. (Information=Physical state: down,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
<HUAWEI>
Nov 11 2024 08:56:08 HUAWEI %%01IFADP/4/PORTUPINFO(l)[36]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
Nov 11 2024 08:56:08 HUAWEI %%01IFADP/4/PORTDOWNINFO(l)[37]:Interface
GigabitEthernet0/0/2 has turned into DOWN state. (Information=Physical state: down,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
<HUAWEI>
Nov 11 2024 08:56:29 HUAWEI %%01IFADP/4/PORTUPINFO(l)[38]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: yes, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
<HUAWEI>
Nov 11 2024 08:56:29 HUAWEI %%01IFADP/4/PORTDOWNINFO(l)[39]:Interface
GigabitEthernet0/0/2 has turned into DOWN state. (Information=Physical state: down,
Negotiation: enable, Negotiation complete: no, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
<HUAWEI>
Nov 11 2024 09:01:22 HUAWEI %%01IFADP/4/PORTUPINFO(l)[40]:Interface
GigabitEthernet0/0/2 has turned into UP state. (Information=Physical state: up,
Negotiation: enable, Negotiation complete: yes, Local full-duplex(10M: yes, 100M:
yes, 1000M: yes), Local half-duplex(10M: yes, 100M: yes, 1000M: no), Remote full-
duplex(10M: yes, 100M: yes, 1000M: no), Remote half-duplex(10M: yes, 100M: yes,
1000M: no))
Nov 11 2024 09:01:22 HUAWEI %%01IFADP/4/PORTDOW

You might also like