Leo School Of Science And Commerce

Subject: computer Meterial

Standard: 11 Marks: 50
Chapter: Ch-1

Section - A
‣ Choose the correct option from those given below each question. (Each question carries 1 Marks) (50)
01. Which are the commonly used file extensions for video?
A. .rm, .ram, .swf, .flv B. .avi, .wmv, .mov C. .mpg, .mpeg, .mp4 D. All of these

Ans. All of these

02. What is it that is called family of characters or letters which have similar look?
A. Style B. Typeface C. Face D. Size

Ans. Typeface

03. In which parts can animation be classified?

A. Two dimensional B. Three dimensional C. Multi dimensional D. Both (a) and (b)

Ans. Both (a) and (b)

04. What is done after the collection of media elements and construction?
A. Project prototype
B. Media elements are combined together to final project.
C. Scripting
D. All of these

Ans. Media elements are combined together to final project.

05. Which button is used to insert Font work object into the document after selecting any style in the Font
work Gallery dialog box?
A. Ok B. Add C. Apply D. Insert

Ans. Ok

06. In which stage of multimedia project, it is checked whether the audience targeted will find the design
and the content attractive or not?
A. Testing B. Story boarding C. Research D. Programming

Ans. Testing

07. How many mediums of information are used to increase the impact of communication ?
A. One B. Few C. Two D. More

Ans. More

08. On which toolbar is Font work Gallery icon shown?

A. Drawing B. Font C. Formatting D. Standard

Ans. Drawing

09. What does audience be in multimedia?

A. Medium B. Operator C. User D. Converter

Ans. User

10. Who plays an important role in absence of the presenter?

Harshad Moliya Page 1

 A. Animation B. Image C. Audio D. Video

Ans. Audio

11. Which unit is used to express size?

A. Pixel B. Point C. Byte D. Inch

Ans. Point

12. Which program is used to make changes into image?

A. Microsoft Paint B. Adobe Photoshop C. GIMP D. All of these

Ans. All of these

13. What is known as pixels map?

A. Bitmap image B. Raster image C. Vector image D. (a) or (b)

Ans. (a) or (b)

14. Which option is selected to run the audio mixer?

→ →
A. File Volume Control B. Control Volume Control
→ →
C. File Open Volume Control D. Control Open Volume Control

Ans. File → Open Volume Control

15. In which of the following method, text is along with other media elements to convey the information?
A. Multimedia B. Mask media C. Master media D. Traditional

Ans. Multimedia

16. In how many parts can animation be classified?

A. One B. Two C. Four D. Three

Ans. Two

17. In which form can the media elements remain in the latest Internet browsers?
A. Inbuilt B. User by Plug in C. Both (a) and (b) D. None

Ans. Both (a) and (b)

18. To whom does not the term scripting refer?

A. Action scripting B. Java scripting C. Both (a) and (b) D. None

Ans. Both (a) and (b)

19. Times, Century, Book man are some examples of which of the following font ?
A. sans serif B. serif C. typeface D. Arial

Ans. serif

20. Which type of communication can be done by mass media?

A. Three way B. Two way C. Both (a) of (b) D. One way

Ans. One way

21. How many stages are there for multimedia production?

A. Seven B. Four C. Five D. Six

Ans. Six

22. What is the best example of audio in absence of the presenter?

A. Technical CD B. Educational CD C. Industrial CD D. None

Ans. Educational CD

Harshad Moliya Page 2

23. Which images when displayed on the screen, the values of equation are recalculated?
A. Bitmap B. Vector C. Raster D. Scalar

Ans. Vector

24. Which type of multimedia example is ‘Learn Musical Instruments’?

A. Undivided B. Divided C. Interactive D. Non-Interactive

Ans. Interactive

25. Which are the commonly used image file formats?

A. .bmp, .gif, .png B. .jpeg / .jpg C. .tif, .psd D. All of these

Ans. All of these

26. Which of the following is used to store the images are stored in form of mathematical equations ?
A. raster B. picture C. bitmap D. vector

Ans. vector

27. What is to be clicked to change the flow of the presentation?

A. Text B. Interactive elements
C. Images D. Non interactive elements

Ans. Interactive elements

28. What is a visual change over time?

A. Bitmap B. Raster C. Animation D. Video

Ans. Animation

29. Which option is used to show Open Me3lla dialog box?

→ →
A. Media Open Device B. Media Open
→ →
C. Media Open Capturing Device D. File Open Capturing Device

Ans. Media → Open Capturing Device

30. What is the extension of MIDI file?

A. .mid B. .midi C. Both (a) and(b) D. .wav

Ans. Both (a) and(b)

31. Which file format is supported by all popular browsers?

A. .rma B. .rm C. .wav D. .wma

Ans. .wav

32. What does value of each pixel represent?

A. Image B. Location C. Color D. Size

Ans. Color

33. Which of the following terms represent PNG ?

A. portable network graphic B. portable new graph
C. photo network graphic D. programmable network graphic

Ans. portable network graphic

34. What is used to discover the type of media file?

A. Application B. Operating system C. Extension D. Primary

Ans. Extension

35. What is the use of multimedia?

Harshad Moliya Page 3

 A. Computer based training B. Training for computer
C. Training for learning computer D. None of these

Ans. Computer based training

36. Which of the following are bitmap file format?

A. gif B. png C. jpeg D. All of these

Ans. All of these

37. What can add great power to any multimedia application?

A. Animation B. Font work C. Text D. Images

Ans. Animation

38. Which of the following terms defines a meaningful speech in any language?
A. Audio B. Voice C. Speech D. Sound

Ans. Audio

39. In which type of communication, video, audio, text and images are used without any interactivity?
A. One way B. Three way C. Two way D. Both (a) of (b)

Ans. One way

40. Which file format is supported by Flash players, YouTube and HTML5?
A. .wmv B. .mp4 C. .avi D. .mov

Ans. .mp4

41. What shows size in “Times new Roman 14 point”?

A. Times new B. 14 point C. Times D. Roman 14

Ans. 14 point

42. Which option is selected to save the recording and name is given?
→ → → →
A. File Save Audio B. Control Save As C. File Save As D. Control Save

Ans. File → Save As

43. Which of the following terms represent typefaces that have different styles and sizes ?
A. character B. letter C. text D. font

Ans. font

44. What is the default text in Font work object?

A. Text B. Font work C. Enter text D. Input

Ans. Font work

45. The term multimedia has been corned from which of the following terms
A. mix, media B. mid, mediate C. multi, mediator D. multiple, media

Ans. multiple, media

46. What is the most important element of multimedia?

A. Video B. Image C. Sound D. Animation

Ans. Sound

47. Which of the following terms represent a two dimensional matrix of dots ?
A. map B. array C. cell D. screen

Ans. map

Harshad Moliya Page 4

48. Which is the new compressed format for recorded music?
A. .mid B. .wma C. .mp3 D. .wav

Ans. .mp3

49. Declare the stages of multimedia production.

A. Collection of media elements and construction, testing
B. Research and analysis, storyboarding
C. Scripting or flowcharting, programming
D. All of these

Ans. All of these

50. Which fonts are easy to read as they guide the eye along the line of text?
A. Italics B. Serif C. Bold D. Sans Serif

Ans. Serif

Harshad Moliya Page 5

 Leo School Of Science And Commerce
Subject: computer Meterial
Standard: 11 Marks: 50
Chapter: Ch-2

Section - A
‣ Choose the correct option from those given below each question. (Each question carries 1 Marks) (50)
01. What is that which allows us to customize window?
A. Customizable lock dialog B. Customizable dock dialog
C. Customizable set dialog D. Customizable arrange dialog

Ans. Customizable lock dialog

02. Which options are shown when you select the Gradient Tool?
A. Conical B. Spiral C. Linear, Radial D. All of these

Ans. Conical

03. How many duck are there in Rectangle?

A. Four B. Two C. Three D. One

Ans. Two

04. Which option is used to create a new file?

→ → →
A. Caret File New B. File New
C. New icon from Toolbox D. All of these

Ans. All of these

05. Which parameters does param panel show when multiple layers are selected?
A. Parameters of bottom layer
B. Parameters of top layer
C. Parameters of any one layer
D. Parameters those are common in the selected layers

Ans. Parameters those are common in the selected layers

06. Which tool is clicked to see the ducks, if the ducks are not visible?
A. Transform B. Sketch C. Draw D. B Line

Ans. Transform

07. Which of the following tool works just like transform tool?
A. Draw B. Rotate C. Width D. Smooth Move

Ans. Smooth Move

08. In Time based authoring tools, the elements are organized along what?
A. Time point B. Time pointer C. Time location D. Timeline

Ans. Timeline

09. Where are the options that are specific to the currently selected tool shown?
A. In Params panel B. In Tool options panel C. In Navigator panel D. In History panel

Ans. In Tool options panel

Harshad Moliya Page 1

10. Which of the following is the file extension of a file created in Synfig Studio?
A. .fis B. .zif C. .sifz D. .fiz

Ans. .sifz

11. Which panel is used to change the entered text later according to our need?
A. Layers B. Info C. Tool D. Parameter

Ans. Parameter

12. Which software are included in Icon and Event based authoring tools?
A. Author ware B. Icon Author C. Both (a) & (b) D. Hyperard

Ans. Both (a) & (b)

13. What is used to add outline layer in Circle?

A. Textbox B. Radio button C. Pull down menu D. Checkbox

Ans. Checkbox

14. “Since it is not available as a standard package in Ubuntu Linux, we need to install it first.” What can
you say for this statement?
A. Depends on version of Linux. B. Depends on version of Synfig.
C. This statement is false. D. This statement is true.

Ans. This statement is true.

15. What is the latest version of Synfig?

A. 0.61.04 B. 0.63.05 C. 0.61.05 D. 0.62.05

Ans. 0.63.05

16. What will appear on the screen when you have non-zero duration in the settings dialog of the project?
A. Time pointer B. Placeline C. Timeline D. Time place line

Ans. Timeline

17. How many ducks does a circle have?

A. One B. Four C. Three D. Two

Ans. Two

18. Where the dock dialog is seen?

A. At the right side of the canvas B. At the bottom of the canvas
C. Both (a) & (b) D. None

Ans. Both (a) & (b)

19. Which of the following tools is used to make objects with any number of points and curves’?
A. rectangle B. star C. bline D. circle

Ans. bline

20. At which of the following drawing if someone is good then he can create good animation in Pencil
animation software?
A. Memory Picture B. Character writing C. Object drawing D. Freehand drawing

Ans. Freehand drawing

21. In which of the following gradient, click to set the center, and drag to indicate the direction in which
the foreground and background color should go?
A. Spiral B. Conical C. Radial D. Linear

Harshad Moliya Page 2

Ans. Conical

22. Which option is used from lowest palette to create the outline color for the object?
A. Fill color B. Background C. Outline color D. Foreground

Ans. Outline color

23. as what color is the currently pointing color be selected while selecting Eye drop tool and click in the
work area?
A. Permanent B. Permanent C. Default Background D. Default Foreground
Foreground Background

Ans. Default Foreground

24. What is the default value of End Time?

A. 10S B. 5F C. 2S D. 5S

Ans. 5S

25. Which of the following tools are used for drawing?

A. B Line, Draw B. Star, Polygon C. Circle, Rectangle D. All of these

Ans. All of these

26. What is the full form of XML?

A. Excluded Markup Language B. Extensible Modify Language
C. Extensible Markup Language D. Extensible Manual Language

Ans. Extensible Markup Language

27. Which of the following tools is used to create smooth transitions between two or more colors in an
object?
A. eye drop B. fill C. gradient D. width

Ans. gradient

28. What value of Opacity option shows visibility of layer?

A. 1 B. O C. -1 D. On

Ans. 1

29. What is displayed for all selected layers in work area?

A. Arrow B. Line C. Point D. Duck

Ans. Duck

30. How many tools are there in upper palette of Toolbox?

A. 18 B. 12 C. 10 D. 11

Ans. 10

31. Which of the following option determines the manner in which the parameter changes?
A. Interpolation B. Gradient C. Blend Method D. Opacity

Ans. Interpolation

32. Which of the following are Time based authoring tools?

A. Flash B. Director C. Synfig. Pencil D. All of these

Ans. All of these

33. Which menu will pop up while clicking on caret button?

A. Time B. Panel C. Canvas D. Preview

Harshad Moliya Page 3

Ans. Canvas

34. Which key is used to submit the value if single line is selected?
A. Escape B. OK button C. Enter D. Space bar

Ans. Enter

35. In Icon and Event based authoring tools, after which task, are the elements added as per the structure?
A. Story boarding B. Prototype C. Algorithm D. Flowchart

Ans. Flowchart

36. What does 0 value of Opacity option mean?

A. Layer is visible. B. Layer is compressed. C. Layer is invisible. D. None

Ans. Layer is invisible.

37. Which operations are done using Tool option panel of Text tool?
A. Select the horizontal-vertical size and orientation of the text.
B. Select the Single or multi line editor for entering the text.
C. Select the Name for the new layer.
D. All of Above

Ans. All of Above

38. Which of the following open source animation tools are easily available on internet?
A. Pencil B. Synfig C. Director D. Both (a) & (b)

Ans. Both (a) & (b)

39. In how many ways is a set of panel in dock dialog arranged?

A. One B. Three C. Four D. Two

Ans. Two

40. Where will Canvas window be seen?

A. At bottom of the user interface B. At left side of the user interface
C. At top of the user interface D. At center of the user interface

Ans. At center of the user interface

41. Which key is used with duck to limit movement horizontal & vertical?
A. Alt B. Space bar C. Ctrl D. Shift

Ans. Shift

42. Which type of software is pencil software?

A. One — Dimensional B. Three-Dimensional C. Two — Dimensional D. None

Ans. Two — Dimensional

43. Which type of animation software is Synfig studio?

A. Three dimensional vector B. Three dimensional bitmap
C. Two dimensional bitmap D. Two dimensional vector

Ans. Two dimensional vector

44. Where will you generally find the set of menus in most of the application?
A. At the top of the drawing window B. At the top of the screen
C. (a)or (b) D. At bottom

Ans. (a)or (b)

Harshad Moliya Page 4

45. What does the blue colored duck in the objects indicate?
A. Vertices B. Place of an object C. Curves D. Radius of a circle

Ans. Radius of a circle

46. What is the use of Tools in Synfig?

A. To create object B. To manipulate objects C. Both (a) & (b) D. None

Ans. Both (a) & (b)

47. Which tool does not affect the output result, it is used for viewing only?
A. Zoom B. Width C. Scale D. Text

Ans. Zoom

48. Which tools are there in upper palette of Toolbox?

A. Save, Save As, Save All B. New, Open, Setup, Help
C. Undo, Redo, About Synfig Studio D. All of these

Ans. All of these

49. What are set using Time tab of Property dialog box?
A. End time B. Start time C. FPS D. All of these

Ans. All of these

50. Which tab of Property dialog box is used for setting the start time, end time and frames per second?
A. Other B. Times wap C. Time D. Image

Ans. Time

Harshad Moliya Page 5

 Leo School Of Science And Commerce
Subject: computer Meterial
Standard: 11 Marks: 50
Chapter: Ch-3

Section - A
‣ Choose the correct option from those given below each question. (Each question carries 1 Marks) (50)
01. Which parameters show the frames or seconds that are looped?
A. Time Track B. Frame Loop C. Scale Loop D. Frame Loop

Ans. Time Track

02. Which terms indicate a specific point on the time line?

A. Second (S) and Form (F) B. Slide (S) and Frame (F)
C. Second (S) and Frame (F) D. Section (S) and Frame (F)

Ans. Second (S) and Frame (F)

03. Which of the following is not a type of animation?

A. Frame-by-Frame B. Morphing C. Rendering D. Kinematics

Ans. Rendering

04. Which message is displayed on status bar while rendering a file?

A. Rendering success full. B. File rendered.
C. File rendered successfully. D. Animation success full.

Ans. File rendered successfully.

05. Which of the following timings is default setting for the End time?
A. 6s B. 3s C. 2s D. 5s

Ans. 5s

06. How can the place of orange indicator be changed?

A. By giving value and pressing enter key in the box which is displayed at the left side on time bar
B. By clicking required value from time bar
C. None of these
D. A and B both

Ans. A and B both

07. Which in-between frames are automatically understood and need not be specified?
A. First and middle B. Middle and last C. First and last D. None of these

Ans. First and last

08. What is the part of time bar known which displays0f, 1s, 2s etc.?
A. Time line frame B. Time line check box C. Time line entry box D. Time line entry field

Ans. Time line entry field

09. Which position of the object is specified to use key-frame?

A. First, middle and the last position B. Only first position
C. Only last position D. First position and the last position

Harshad Moliya Page 1

Ans. First, middle and the last position

10. What is known as visual change over time of images?

A. Image B. Key-frame C. Video D. Animation

Ans. Animation

11. What is known as sequence of images displayed one after the other in a given time frame?
A. Script B. Animation C. Presentation D. Program

Ans. Animation

12. What is the full form of JMP?

A. Jimp B. Jamp C. Jumper D. Jump

Ans. Jump

13. Which colored button is shown on right hand side of time bar if you have a non-zero end time?
A. Black B. Orange C. Green D. Red

Ans. Green

14. Which key is used to move an object in a straight line on Canvas?

A. Space B. Alt C. Ctrl D. Shift

Ans. Shift

15. How many tabs are there in Canvas properties dialog box in synfig?
A. 3 B. 2 C. 1 D. 4

Ans. 3

16. What is the default value of FPS?

A. 15.00000 B. 10.00000 C. 24.00000 D. 14.00000

Ans. 24.00000

17. How many seconds are generally arranged for end time in time tab?
A. 10 B. 4 C. 20 D. 5

Ans. 5

18. Which of the following animation requires lot of time and resource?
A. Time-to-time B. Frame-by-Frame C. Stage-by-Stage D. Kinematics

Ans. Frame-by-Frame

19. By pressing which key the indicator will take you to required position in time slider?
A. Tab B. Enter C. Ctrl D. Shift

Ans. Enter

20. What is displayed one after the other in a given time frame which is known as animation?
A. Key-frame B. Presentation C. Video D. Images

Ans. Images

21. Which of the following tems represent an effect wherein the image transforms into another?
A. Tweening B. Key frame C. Kinematics D. Morphing

Ans. Morphing

22. What is a default value of target option Rendering Settings dialog box in Synfig?

Harshad Moliya Page 2

 A. Png B. Auto C. Gif D. Null

Ans. Auto

23. By selecting which option of tool fill color and line color will be shown after selecting circle tool from
tool box?
A. Region B. Outline C. Plant D. Both (a) And (b)

Ans. Both (a) And (b)

24. Which are the options in time tab of Canvas properties dialog box?
A. End time B. Frames per second C. Start time D. All of these

Ans. All of these

25. Which of the following mean repetition or________?

A. Time B. Rendering C. Loop D. Nesting

Ans. Loop

26. Which type of images are played one after the other to create a moving effect in animation?
A. Analog B. Physical C. Electronic D. Digital

Ans. Digital

27. Which is the extension of file created in Synfig?

A. .sin B. .syfz C. .sifz D. .sfz

Ans. .sifz

28. How many frames are there in each second?

A. 48 B. 36 C. 24 D. 12

Ans. 24

29. Which is the range of frame?

A. 1 to 24 B. 1 to 12 C. 0 to 24 D. 0 to 12

Ans. 0 to 24

30. What is the default value of End time in Time tab?

A. 3s B. 2s C. 5s D. 10s

Ans. 5s

31. In which of the following any changes made will have an effect on the animation if animate editing
mode is not active?
A. Changes will not effect B. End of the timeline
C. Beginning of the time line D. Entire timeline

Ans. Entire timeline

32. Which button of time bar is clicked to see how our animation will look?
A. On B. Run C. Play D. Show

Ans. Play

33. In which dialog box is the value of Start time, End time and FPS given?
A. Properties B. Rendering C. Settings D. Canvas

Ans. Properties

34. Which button of time bar is clicked to see frame by frame animation?
A. Post frame, Pre frame B. After frame, before frame

Harshad Moliya Page 3

 C. N frame, P frame D. Next frame, previous frame

Ans. Next frame, previous frame

35. It is a must to leave animate editing mode before doing the following process?
A. Canvasing B. Processing C. Storing D. Rendering

Ans. Rendering

36. Where is the message “File rendered successfully” shown?

A. Layer panel B. In canvas C. On status bar D. Parameter panel

Ans. On status bar

37. Which of the following means ‘repetition for a certain time’?

A. Track loop B. Nested loop C. Rendering loop D. Time loop

Ans. Time loop

38. Where is the status bar located in Synfig?

A. On right side of the window B. On bottom of the window
C. On upper side of the window D. On left side of the window

Ans. On bottom of the window

39. What is the animation known as in which the images can be first created and then displayed in a
sequence?
A. Time-to-Time B. Stage-by-stage C. Kinematics D. Frame-by-Frame

Ans. Frame-by-Frame

40. Which colored button is shown at the right hand side of time bar when animate editing mode is active?
A. Yellow B. Orange C. Green D. Red

Ans. Red

41. Which of the following changes of the object are represented by time-track panel or way-point?
A. Color B. Place C. A and B both D. Size

Ans. A and B both

42. Which type of changes to be done in images and then displayed in sequence in Frame-by-Frame
animation?
A. Large B. Irregular C. So many D. Small

Ans. Small

43. In which of the following program animation can be seen after rendering a file?
A. Web browser B. Image viewer C. A and B both D. None of these

Ans. A and B both

44. Which entry is displayed in the list by adding new key frame at 0f?
A. 0f 0f (Jmp) B. 0 0 N C. 0 0 (Jmp) D. 0f 0f new frame

Ans. 0f 0f (Jmp)

45. What is the full form of FPs?

A. Frames per second B. Frames per section C. Forms per second D. Forms per section

Ans. Frames per second

46. When will any changes made have an effect on the animation in the time slider?
A. When animate editing mode is not there

Harshad Moliya Page 4

 B. When animate editing mode is not active
C. When animate editing mode is active
D. None of these

Ans. When animate editing mode is active

47. Which of the following option is not displayed on key-frame panel?

A. Time B. Jump C. Length D. Track

Ans. Track

48. What is known as computer uses various algorithms to apply the final affects you have specified on the
objects created?
A. Canvasing B. Animating C. Converting D. Rendering

Ans. Rendering

49. By which of the following differences, different animation software can be differentiated by each
other?
A. If user gives last position and, first position is given by computer
B. How much to be drawn by the user and how much is automatically generated by the computer
C. If user gives first position and, last position is given by computer
D. None of these

Ans. How much to be drawn by the user and how much is automatically generated by the computer

50. Which side time bar is shown in canvas area of Synfig?

A. Right B. Upper C. Left D. Down

Ans. Down

Harshad Moliya Page 5

 Leo School Of Science And Commerce
Subject: computer Meterial
Standard: 11 Marks: 50
Chapter: Ch-4

Section - A
‣ Choose the correct option from those given below each question. (Each question carries 1 Marks) (50)
01. How are the layers kept in Synfig?
A. Above each other B. Below each other C. In different file D. (a) OR (b)

Ans. (a) OR (b)

02. How the layers in Synfig are different from other animation software?
A. The upper layer can change the behavior of the layers below it.
B. Every object, element and effect have their own layer.
C. Both (a) and (b)
D. None

Ans. Both (a) and (b)

03. “We do not have a layer with multiple effects in Synfig.” Select valid option from the following for this
sentence.
A. Depends on effect. B. Depends on layer.
C. This sentence is true. D. This sentence is false.

Ans. This sentence is true.

04. Which of the following feature is used to attach a vertex of an object to the vertex of a B line?
A. Link to object B. Link to object C. Link to line D. Link to b line

Ans. Link to b line

05. Which of the following option is true for the layer in Synfig?
A. It can modify the layers beneath.
B. The upper layer can change the behavior of the layer below it.
C. It can distort the layers beneath.
D. All of these

Ans. All of these

06. Behind which object should be the object “sun” placed when creating natural scene?
A. Trees B. Birds C. Mountain D. Gate

Ans. Mountain

07. Gradient, blur, distortion and filter are types of which of the following components?
A. Panels B. Layer C. Key frames D. Frames

Ans. Layer

08. How green duck of them are arranged after encapsulating Rotate and Circle layer to rotate the circle
on specific path?
A. Above and below each other B. In Opposite direction
C. Away from each other D. Close to each other

Ans. Close to each other

Harshad Moliya Page 1

09. Using which of the following option, gradient effect is only applied to only single layer?
A. Tweening B. Fadding C. Encapsulation D. Masking

Ans. Encapsulation

10. Which action is performed on Circle layer and rotate layer to rotate a circle on specific path?
A. Tweening B. Masking C. Encapsulation D. Fadding

Ans. Encapsulation

11. In which area does the gradient layer have effect on the layer below it?
A. Filter B. Distortion C. Encapsulated D. Blur

Ans. Encapsulated

12. What does a layer represent for single primitive?

A. Image B. Object C. Outline D. All of these

Ans. All of these

13. Gradient is applied to which of the following objects?

A. Object outside encapsulated area B. All objects except encapsulate
C. Object inside encapsulated area D. None

Ans. Object inside encapsulated area

14. In to which layer, each individual element of the canvas is broken down?
A. Three B. Two C. Individual D. Only one

Ans. Individual

15. Which key is pressed to finish the B line?

A. Ctrl B. Space bar C. Esc D. Enter

Ans. Esc

16. What of the following allows us to change the order in which objects are displayed?
A. Panel B. Key-frame C. Layer D. Frame

Ans. Layer

17. Which one of the following is a type of layer?

A. Time bar B. Animate edit mode C. Palette D. Gradient

Ans. Gradient

18. Which tool is used to create a circle?

A. Round B. Oval C. Radial D. Circle

Ans. Circle

19. Which of the below have their own layer?

A. Time, parameter, layer B. Effect, object, panel
C. Object, element, effect D. Parameter, object, panel

Ans. Object, element, effect

20. Which option is used to see gradient effect not on all other objects below gradient layer?
A. Encapsulation B. Fadding C. Tweening D. Masking

Ans. Encapsulation

21. Each individual element of the canvas is broken down into which of following coponents?

Harshad Moliya Page 2

 A. Frames B. Panels C. Key frames D. Layers

Ans. Layers

22. Which setting of Blend Method displays the content of the layer?
A. Alpha over B. Color C. Composite D. Straight

Ans. Composite

23. Which option is selected in Blend Method to see gradient effect on object drawn in canvas?
A. Alpha Over B. Color C. Straight Onto D. Composite

Ans. Straight Onto

24. Into how many layers are the objects encapsulated to apply gradient to a particular object or a group
of objects?
A. Two B. Three C. Different D. One

Ans. One

25. Which of the following option is selected to finish the B line?

A. Transform tool B. Esc key
C. Both (a) and (b) D. Again select B Line tool

Ans. Both (a) and (b)

26. Which new layer is created by selecting Encapsulate option?

A. Inline Layer B. Inline Object C. Inline Frames D. Inline Canvas

Ans. Inline Canvas

27. Which of the following panel shows the parameters of a layer?

A. Key frame B. Layer C. Time track D. Params

Ans. Layer

28. What will be the effect on other objects either above it or below it when any object is modified?
A. Other objects are not visible. B. Other objects are not changed.
C. Other objects are also changed. D. None

Ans. Other objects are not changed.

29. Which option is selected by doing right click on the B line object in the canvas where you want the
circle to start from after holding Ctrl key and select green duck of Inline Canvas, position duck of
Rotate layer and B line layer?
A. Link to Vertex B. Link to Layer C. Link to B line D. Link to Line

Ans. Link to B line

30. Why the circle cannot be dragged directly to the end point by moving in clockwise direction?
A. This will record the position of the circle at the different timing location properly
B. Animation cannot be done.
C. This will not record the position of the circle at the different timing location properly.
D. None

Ans. This will not record the position of the circle at the different timing location properly.

31. How is the new object layer taken to the Inline Canvas layer?
A. By doing double click B. By doing right click C. By doing click D. By dragging

Ans. By dragging

32. To rotate a circle on specific path, after encapsulating Rotate and Circle layers, which of the following
actions are performed after that ‘Link to B line’ option is selected by doing right click on B line tool? 1.

Harshad Moliya Page 3

 Select the Inline Canvas and select its green duck. 2. With holding down Ctrl key and choose the rotate
layer 3. Continue to hold the ctrl key and select the B line layer. 4. Select Encapsulate option.
A. 2,3,1 B. 1,3,2 C. 1,2,3 D. 3,2,1

Ans. 1,2,3

33. How is the layer for object, outline or image?

A. Only one B. Three C. Individual D. Two

Ans. Individual

34. Using which of the following, effects are given to various objects without changing other objects in
animation?
A. DE capsulation B. Masking C. Fadding D. Encapsulation

Ans. Encapsulation

35. As what can we think of layers?

A. Image B. Book C. Paper D. Icon

Ans. Paper

36. Which key is used to select two layers together in Synfig?

A. Ctrl B. Shift C. (a) OR (b) D. Esc

Ans. (a) OR (b)

37. Which of the following terms represent the different levels on which we place our objects stacked
above and below each other?
A. Frame B. Panels C. Parameter D. Layer

Ans. Layer

38. What will it blur if we use a Blur Layer on top of the layers inside the Inline Canvas?
A. Every layer that lies under the Inline Canvas
B. Only Inline Canvas layer
C. Every layer that lies above the Inline Canvas
D. All layers

Ans. Only Inline Canvas layer

39. Where will be the rendered file usually viewed?

A. In Real player B. In Editor C. In Synfig D. In web browser

Ans. In web browser

40. What does the red line around the canvas indicate?
A. The Animation Editing mode cannot be on.
B. There is an error in animation.
C. The Animation Editing mode is off.
D. The Animation Editing mode is on.

Ans. The Animation Editing mode is on.

41. “If any one layer is encapsulated then its effect is applied to layer below it.” What can be said for this
sentence?
A. Depends on layer. B. Depends on way of the encapsulation.
C. This sentence is false. D. This sentence is true.

Ans. This sentence is false.

42. “The name of the encapsulated layer can be changed.” Which of the following option is true for this
sentence?

Harshad Moliya Page 4

 A. Depends on gathered layers B. This sentence is False.
C. This sentence is true. D. None

Ans. This sentence is true.

43. Which data can be modified only by a layer?

A. The data that it gets from the layer above it.
B. The data that it gets from the layer directly below it.
C. Both (a) and (b)
D. From all the layer

Ans. The data that it gets from the layer directly below it.

44. Into which panel can the parameters of a layer be seen after selecting the layer from the layers panel?
A. History B. Tool C. Params D. Info

Ans. Params

45. What can be placed on layer in Synfig?

A. Button B. Panel C. Image or Object D. Icon

Ans. Image or Object

46. Which button is used for the reposition of the gradient (any) layer?
A. Back Layer B. Down Layer C. Upper Layer D. Lower Layer

Ans. Lower Layer

47. Which are the different layers in Synfig?

A. Filter B. Distortion C. Gradient, Blur D. All of these

Ans. All of these

48. How many effects will be there in one layer?

A. Zero B. Two C. Multiple D. Only one

Ans. Only one

49. Which layer is used to distort or modify the layers beneath?

A. Gradient B. Rotate C. Effect or Filter D. Transform

Ans. Effect or Filter

50. Link to B line feature is used to attach a vertex of an object to the vertex of what of the following?
A. Circle B. Loop C. Rotate D. B line

Ans. B line

Harshad Moliya Page 5