Scribd
Upload
29 views2 pages

Baofeng UV 5R Programming Guide

This document is a step-by-step programming guide for the Baofeng UV-5R radio, applicable to several models. It provides detailed instructions on setting the radio to communicate with a repeater and storing frequencies in memory channels. The guide includes specific menu options and sequences for configuring various settings such as transmit power and repeater shift direction.

Uploaded by

Luchiio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views2 pages

Baofeng UV 5R Programming Guide

This document is a step-by-step programming guide for the Baofeng UV-5R radio, applicable to several models. It provides detailed instructions on setting the radio to communicate with a repeater and storing frequencies in memory channels. The guide includes specific menu options and sequences for configuring various settings such as transmit power and repeater shift direction.

Uploaded by

Luchiio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Machine Translated by Google

Baofeng UV-5R Step-by-Step Programming Guide


Also applies to UV-5RA, UV-5X3, UV-5RAX, GT-3, BF-F8, BF-F9
Noji Ratzlaff
Set the radio to communicate with a repeater at 146.780– MHz, 100.0 Hz
0. Turn on the radio and make sure it's unlocked 6. Set the transmit tone frequency (T-CTCS)

1. VFO/MR (frequency mode) MENU - 13 - MENU - 1000 - MENU - EXIT

2. Select the upper display 7. Set the transmit power level

A/B MENU - 2 - MENU - HIGH - MENU - EXIT

3. Set the frequency 8. Optional: turn off the TDR (I would, at first)

1-4-6-7-8-0 MENU - 7 - MENU - OFF - MENU - EXIT

4. Set the repeater offset Your radio is now set to transmit as specified

MENU - 26 - MENU - 000600 - MENU - EXIT

5. Set the repeater shift direction (SFT-D)

MENU - 25 - MENU - (minus) - MENU - EXIT

Store the current repeater and tone settings in a memory channel


0. Follow the procedure above to set your radio for the 2. Store the frequency in channel 36
frequency of your choice
MENU - 27 - MENU - 36 - MENU - EXIT
1.Clear target memory channel 36
Hear “receiving memory”
MENU - 28 - MENU - 36 - MENU - EXIT
press %
Hear “delete channel”
MENU - MENU - MENU - EXIT

Hear “transmitting memory”

press %

Now stored in memory channel 36

Recall a stored memory setting


1. Press VFO/MR (channel mode)

2. Press the up or down arrows or enter the


three-digit channel number (all three digits)

0-3-6

The stored channel is now ready for use


Machine Translated by Google

Set the radio to communicate at 147.480 MHz simplex


0. Turn on the radio and make sure it's unlocked 7.Clear target memory channel 5

1. VFO (frequency mode) MENU - 28 - MENU - 5 - MENU - EXIT

2. Select the upper display Hear “delete channel”

A/B 8. Store the frequency in channel 5

3. Set the frequency MENU - 27 - MENU - 05 - MENU - EXIT

1-4-7-4-8-0 Hear “receiving memory”

4. Turn off the repeater shift direction (SFT-D) press %

MENU - 25 - MENU - OFF - MENU - EXIT MENU - MENU - MENU - EXIT

5. Set the transmit power level Hear “transmitting memory”

MENU - 2 - MENU - HIGH - MENU - EXIT press %

6. Optional: turn off the TDR (I would, at first) Now stored in memory channel 5

MENU - 7 - MENU - OFF - MENU - EXIT

You might also like