Bolt Technical Specifications

BOLT HEAD MARKINGS SPANNER / SOCKET SIZE THREAD TERMINOLOGY PITCH AND THREAD HEX

Head Marking Strength and Material Bolt Type Standard Bolt Size AS1110/1 - ISO 4014 AS1252.1 DIN931/3/4 DIN6921 JIS B1189 Size Pitch (mm) Threads Per Inch
HEX BLANK
M1.6 3.2 - 3.2 - - M ʺ # Coarse Fine Extra Fine UNC UN8 UNF BSW BSF
CLASS 4.6 CUP HEAD M2 4 - 4 - - HEAD HEIGHT
Low or medium AS/NZS 1390 M1.6 - #0 0.35 - - - - 80 - -
SQUARE NECK M2.5 5 - 5 - - HEX SET SCREW
4.6 Carbon Steel M2 - #1 0.4 - - - - 72 - -
M3 5.5 - 5.5 - -
- - #2 - - - 56 - 64 - -
M4 7 - 7 - -
CLASS 4.6 HEX HEAD AS 1111.1 / .2 M2.5 - #3 0.45 - - 48 - 56 - - HEX FLANGE

ACROSS CORNERS
M5 8 - 8 8 7
Low or medium - - #4 - - - 40 - 48 - -
HEX HEAD M6 10 - 10 10 8
4.6 Carbon Steel AS/NZS 1393 M3 1/8 #5 0.5 - - 40 - 44 40 -
COACH SCREWS M7 11 - 11 11 - HEX WASHER HEAD
M3.5 - #6 0.6 - - 32 - 40 - -
M8 13 - 13 13 10
8.8 CLASS 8.8 M4 5 / 32 #8 0.7 - - 32 - 36 32 -

BOLT LENGTH
M10 16 - 17 15 13
Medium Carbon Steel, HEX HEAD AS/NZS 1252:2016 K0 M5 3 / 16 #10 0.8 - - 24 - 32 24 32 SOCKET HEAD
M12 18 21 19 16 15
quenched and tempered ACROSS FLATS - - #12 - - - 24 - 28 - -
M14 21 - 22 18 18
M6 1/4 - 1 - - 20 - 28 20 26
M16 24 27 24 21 21 LOW HEAD CAP
CLASS 8.8 M8 5 / 16 - 1.25 1 - 18 - 24 18 22
M18 27 - 27 - -
Medium Carbon Steel, HEX HEAD AS 1110.1 SHANK M10 3/8 - 1.5 1.25 1 16 - 24 16 20
M20 30 32 30 27 -
8.8 quenched and tempered - 7 / 16 - - - - 14 - 20 14 18
M22 34 36 32 - - SHOULDER SOCKET
M12 1/2 - 1.75 1.5 1.25 13 - 20 12 16
M24 36 41 36 - -
CLASS 10.9 HEX HEAD AS 1110.1 RIGHT-HAND M14 9 / 16 - 2 1.5 - 12 - 18 12 16
M27 41 46 41 - -
Alloy Steel, quenched THREAD M16 5/8 - 2 1.5 - 11 - 18 11 14 BUTTON HEAD
M30 46 50 46 - -
METRIC

10.9 and tempered HEX HEAD EN 14399-3 K2 M18 - - 2.5 1.5 - - - - - -

M33 50 - 50 - -
THREAD M20 3/4 - 2.5 1.5 - 10 - 16 10 12
M36 55 60 55 - - ANGLE M22 7/8 - 2.5 1.5 - 9 - 14 9 11 COUNTERSUNK HEAD
CLASS 12.9 M39 60 - 60 - -
METRIC

HEX HEAD AS 4291.1 M24 1 - 3 2 1.5 8 8 12 (14) 8 10

Alloy Steel, quenched M42 65 - 65 - -
12.9 and tempered M27 1 1/8 - 3 2 1.5 7 8 12 7 9

THREAD LENGTH
M45 70 - 70 - - PITCH M30 1 1/4 - 3.5 2 1.5 7 8 12 7 9
CUP HEAD
(METRIC)
M48 75 - 75 - -
M33 1 3/8 - 3.5 2 - 6 8 12 6 8
CLASS 50 M52 80 - 80 - -
HEX HEAD M36 1 1/2 - 4 3 2 6 8 12 6 8 PLOW-BOLT
304 Stainless Steel M56 85 - 85 - -
A2
M60 90 - 90 - -
LEFT-HAND M39 1 5/8 - 4 3 - - 8 - 5 8
M42 - - 4.5 3 - - - - - -
M64 95 - 95 - -
M45 1 3/4 - 4.5 3 - 5 8 12 5 7 TRACK-BOLT
CLASS 70 M68 100 - 100 - -
HEX HEAD THREADS M48 1 7/8 - 5 3 - - 8 - - -
304 Stainless Steel M72 105 - 105 - - PER INCH
A2-70 METRIC IMPERIAL
M76 110 - 110 - - (IMPERIAL)

M80 115 - 115 - -

SEMS HEX
CLASS 50 DIN 931 M85 120 - 120 - -
HEX HEAD M90 130 - 130 - - BREAKING STRENGTH COMPARISON
316 Stainless Steel DIN 933
A4 M95 135 - 135 - -
MINOR Ø
M100 145 - 145 - -
M105 150 - 150 - - STRUCTURAL
CLASS 70 HEX HEAD
PITCH Ø
M110 155 - 155 - -
A4-70 316 Stainless Steel
Class 4.6
Bolt Size AS2465 - ANSIB18.2.1 MAJOR Ø
A4 - 50
CLASS 80 1/4 7/ 16 PURLIN
5 / 16 1/ 2 A4 - 70
316 Stainless Steel HEX HEAD
A4-80 3/8 9/ 16 TORQUE AND TENSION Neptune® & A4 - 80
7 / 16 5/ 8 Sampsonrod® & Class 8.8
1/2 3/ 4 FASCIA
BSW GRADE 2 BSW 9 / 16 13/ 16
Sampsonrod® & Grade 5

Low or medium AS/NZS 2451 AS/NZS 1252

HEX HEAD 5/8 15/ 16 Torque
Carbon Steel Bumax® 88
3/4 1 - 1/ 8
7/8 1 - 5/ 16 Bumax® 109
HBS-BOLT®
GRADE 5 TENSION CONTROL
IMPERIAL

UNC/UNF 1 1 - 1/ 2 Hobrod® Class 10.9

Medium Carbon Steel, HEX HEAD Force
IMPERIAL

1 - 1/8 1 - 11/ 16 Hobrod® Grade 8

quenched and tempered
1 - 1/4 1 - 7/ 8
AS/NZS 2465 Grade 9
1 - 3/8 2 - 1/ 16
GRADE 8 UNC/UNF 1 - 1/2 2 - 1/ 4
Class 12.9
Medium Carbon Alloy, HEX HEAD 1 - 3/4 2 - 5/ 8
quenched and tempered Clamping
1 - 7/8 2 -13/ 16
Force
2 3
Class 8.8 2 - 1/4 3 - 3/ 8 WASHER GAUGE CONVERTER
High Molybdenum – G316L 2 - 1/2 3 - 3/ 4 Clamping
88 Force gauge
BUMAX®

2 - 3/4 4 - 1/ 8 8 9 10 12 14 16 18 19 20 21 22 30
3 4 - 12 Tension in Bolt mm 3.99 3.55 3.18 2.52 1.99 1.59 1.26 1.07 0.89 0.81 0.74 0.31
Class 10.9 3 - 1/2 5 - 1/ 4 inch 0.1570ʺ 0.1398ʺ 0.1250ʺ 0.0991ʺ 0.0785ʺ 0.0625ʺ 0.0495ʺ 0.0420ʺ 0.0350ʺ 0.0320ʺ 0.0290ʺ 0.0123ʺ
High Molybdenum – G316L 3 - 3/4 5 - 5/ 8
109 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 While
370every 380
4 6 Disclaimer: reasonable effort has been made to ensure that this document is correct at the time of printing, Hobson Engineering®, its agencies and employees, disclaim any and all liability to any person in respect of anything or the consequences of anything done or omitted to be done in reliance upon the whole or any part of this document.

QUALITY FASTENERS SINCE 1935

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 hobson.com.au