Mid Suggestions - Cse453 - Digital - Signal - Processing
Mid Suggestions - Cse453 - Digital - Signal - Processing
Q1. What do you mean by signal and signal processing? Give example.
Q2. Define a time-invariant system. How does it differ from a time-variant system?
Q3.Determine if the systems described by the following input-output equations are linear or nonlinear:
i. y(n)=x(n2)
ii. y(n)=x2(n)
iii. y(n)=ex(n)
Q5. In what scenarios would you prefer continuous-valued signals over discrete-valued signals?
Q6. Provide an example of an unstable system and describe how it can affect signal processing tasks.
Q7. If a signal has a maximum frequency between 1000 Hz and 4000 Hz, whatwill be the most appropriate sampling rate?
y[n]=2x[n]+5x[n−1]+6x[n−2]
Q10. The impulse response of a linear time-invariant system is h(n) = [1, 2,1,-1} ,
Determine the response of the system to the input signal x(n) = {1,2.3,1}
Q12.
Sketch the block diagram representation of the discrete-time system described by the input-output relation as given bellow:
1 1 1
𝑦(𝑛) = y(n-1)+ 𝑥(𝑛) + 𝑥(𝑛 − 1)
4 2 2
Where x(n) is the input and y(n) is the output of the system.