INHERITANCE

Defining Inheritance & Related Terms

 Inheritance is the transmission of genetic information from generation to generation

 Chromosomes are located in the nucleus of cells
 They are thread-like structures of DNA, carrying genetic information in the form of genes
 A gene is a short length of DNA found on a chromosome that codes for a specific protein
 This could be a structural protein such as collagen found in skin cells, an enzyme or a
hormone
 Genes control our characteristics as they code for proteins that play important roles in
what our cells do

Genes are short lengths of DNA that code for a protein. They are found on chromosomes

 Alleles are different versions of a particular gene. The ABO gene for blood group type
has three alleles, IA, IB and IO

Diploid & Haploid Nuclei

 All humans have 23 different chromosomes in each cell

 In most body cells, not including the gametes (sex cells), we have 2 copies of each
chromosome, leading to a total of 46 chromosomes
 Nuclei with two sets of chromosomes are known as diploid nuclei
  The gametes (egg and sperm cells) only have one copy of each chromosome, meaning
they have a total of 23 chromosomes in each cell
 Nuclei with one set of unpaired chromosomes are known as haploid nuclei

Exam Tip
An easy way to remember the difference between haploid and diploid is to remember:Haploid =
Half the normal number of chromosomesIt’s worth noting that the human diploid chromosome
number is 46. In an exam, you may be given information about a different species, with a
different number of chromosomes. Make sure you read exam questions carefully.

INHERITANCE OF SEX

XX & XY Chromosomes

 Sex is determined by an entire chromosome pair (as opposed to most other characteristics
that are just determined by one or a number of genes)
 Females have the sex chromosomes XX
 Males have the sex chromosomes XY
 As only a father can pass on a Y chromosome, he is responsible for determining the sex
of the child
Sperm cells determine the sex of offspring
 The inheritance of sex can be shown using a genetic diagram (known as a Punnett
square), with the X and Y chromosomes taking the place of the alleles usually written in
the boxes

Punnett square showing the inheritance of sex

PROTEIN SYNTHESIS

Transcription & Translation

 Protein synthesis

 Proteins are made by ribosomes with the sequence of amino acids controlled by
the sequence of bases contained within DNA
 DNA cannot travel out of the nucleus to the ribosomes (it is far too big to pass through a
nuclear pore) so the base code of each gene is transcribed onto an RNA molecule
called messenger RNA (mRNA).
 mRNA then moves out of the nucleus and attaches to a ribosome
 The ribosome ‘reads’ the code on the mRNA in groups of three
 Each triplet of bases codes for a specific amino acid
 In this way the ribosome translates the sequence of bases into a sequence of amino
acids that make up a protein
 Once the amino acid chain has been assembled, it is released from the ribosome so it can
fold and form the final structure of the protein

The triplet code of DNA (carried by mRNA) is read by the ribosome and amino acids are
attached together in a specific sequence to form the protein
  In this way, DNA controls cell function by controlling the production of proteins
 The proteins may be enzymes, antibodies, or receptors for neurotransmitters
 Although all body cells in an organism contain the same genes, many genes in a
particular cell are not expressed because the cell only makes the specific proteins it needs

CELL DIVISION

Mitosis: Basics

 Most body cells have two copies of each chromosome

 We describe these cells as diploid
 When cells divide their chromosomes double beforehand
 This ensures that when the cell splits in two, each new cell still has two copies of each
chromosome (is still diploid)
 This type of cell division is used for growth, repair of damaged tissues, replacement of
cells and asexual reproduction and is known as mitosis
 Mitosis is defined as nuclear division giving rise to genetically identical cells
Mitosis

The process of cell division by mitosis

Process:

 Just before mitosis, each chromosome in the nucleus copies itself exactly (forms x -
shaped chromosomes)
 Chromosomes line up along the centre of the cell where cell fibers pull them apart
  The cell divides into two; each new cell has a copy of each of the chromosomes

Importance:

 All cells in the body (excluding gametes) are produced by mitosis of the zygote
 Mitosis is important for replacing cells e.g, skin cells, red blood cells and for allowing
growth (production of new cells e.g. when a zygote divides to form an embryo)

Occurs in:

 Growth: mitosis produces new cells

 Repair: to replace damaged or dead cells
 Asexual reproduction: mitosis produces offspring that are genetically identical to the
parent

Stem Cells

 Many tissues in the human body contain a small number of unspecialised cells
 These are called stem cells and their function is to divide by mitosis and produce new
daughter cells that can become specialised within the tissue and be used for different
functions

Meiosis: Basics

 Meiosis is a type of nuclear division that gives rise to cells that are genetically different
 It is used to produce the gametes (sex cells)

Meiosis

 The number of chromosomes must be halved when the gametes (sex cells) are formed
 Otherwise there would be double the number of chromosomes after they join at
fertilisation in the zygote (fertilized egg)
 This halving occurs during meiosis, and so it is described as a reduction division in which
the chromosome number is halved from diploid to haploid, resulting in genetically
different cells
 It starts with chromosomes doubling themselves as in mitosis and lining up in the centre
of the cell
 After this has happened the cells divide twice so that only one copy of each chromosome
passes to each gamete
 We describe gametes as being haploid - having half the normal number of chromosomes
 Because of this double division, meiosis produces four haploid cells
The process of cell division by meiosis to produce haploid gamete cells
Process:

 Each chromosome makes identical copies of itself (forming X-shaped chromosomes)

 First division: chromosomes pair up along the centre of the cell, recombination occurs
and then cell fibres will pull the pairs apart, each new cell will have one of each
recombinant chromosome pair
 Second division: chromosomes will line up along the centre of the cell, cell fibres will
pull them apart (as with mitosis)
 A total of four haploid daughter cells will be produced

Importance:

 Production of gametes e.g. sperm cells and egg cells, pollen grains and ovum
 Increases genetic variation of offspring

 Meiosis produces variation by forming new combinations of maternal and

paternal chromosomes every time a gamete is made, meaning that when gametes fuse
randomly at fertilisation, each offspring will be different from any others

Differences between Mitosis & Meiosis

Exam Tip
Questions on cell division often ask for differences between mitosis and meiosis. Learn two or
three and remember to BE SPECIFIC when giving your answer.You should also know the
reasons for a specific type of cell division taking place and the types of cells where each happen.
 MONOHYBRID INHERITANCE

Inheritance Definitions

 A gene is a short length of DNA found on a chromosome that codes for a

particular characteristic (expressed by the formation of different proteins)
 Alleles are variations of the same gene

 As we have two copies of each chromosome, we have two copies of each gene and
therefore two alleles for each gene
 One of the alleles is inherited from the mother and the other from the father
 This means that the alleles do not have to ‘say’ the same thing
 For example, an individual has two copies of the gene for eye colour but one allele could
code for brown eyes and one allele could code for blue eyes
 The observable characteristics of an organism (seen just by looking - like eye colour, or
found – like blood type) is called the phenotype
 The combination of alleles that control each characteristic is called the genotype
 Alleles can be dominant or recessive
 A dominant allele only needs to be inherited from one parent in order for the
characteristic to show up in the phenotype
 A recessive allele needs to be inherited from both parents in order for the characteristic to
show up in the phenotype.
 If there is only one recessive allele, it will remain hidden and the dominant characteristic
will show
 If the two alleles of a gene are the same, we describe the individual as
being homozygous (homo = same)
 An individual could be homozygous dominant (having two copies of the dominant
allele), or homozygous recessive (having two copies of the recessive allele)
 If the two alleles of a gene are different, we describe the individual as
being heterozygous (hetero = different)
 When completing genetic diagrams, alleles are abbreviated to single letters
  The dominant allele is given a capital letter and the recessive allele is given the same
letter, but lower case

Alleles of a gene can carry the same instructions or different instructions. You can only inherit
two alleles for each gene, and they can be the same or different

 We cannot always tell the genotype of an individual for a particular characteristic just by
looking at the phenotype – a phenotype associated with a dominant allele will be seen in
both a dominant homozygous and a dominant heterozygous genotype
 If two individuals who are both identically homozygous for a particular characteristic are
bred together, they will produce offspring with exactly the same genotype and phenotype
as the parents - we describe them as being ‘pure breeding’ as they will always produce
offspring with the same characteristics
 A heterozygous individual can pass on different alleles for the same characteristic each
time it is bred with any other individual and can therefore produce offspring with a
different genotype and phenotype than the parents - as such, heterozygous individuals are
not pure breeding
Genetic Diagrams

 Monohybrid inheritance is the inheritance of characteristics controlled by a single gene

(mono = one)
 This can be determined using a genetic diagram known as a Punnett square
 A Punnett square diagram shows the possible combinations of alleles that could be
produced in the offspring
 From this the ratio of these combinations can be worked out
 Remember the dominant allele is shown using a capital letter and the recessive allele is
shown using the same letter but lower case

Example:

 The height of pea plants is controlled by a single gene that has two alleles: tall and short
 The tall allele is dominant and is shown as T
 The small allele is recessive and is shown as t

‘Show the possible allele combinations of the offspring produced when a pure breeding short
plant is bred with a pure breeding tall plant’

 The term ‘pure breeding’ indicates that the individual is homozygous for that
characteristic
 A pure-breeding genetic cross in pea plants

 This shows that there is a 100% chance that all the offspring will be tall

‘Show the possible allele combinations of the offspring produced when two of the offspring
from the first cross are bred together’
 A genetic cross diagram (F2 Generation)

 All of the offspring of the first cross have the same genotype, Tt (heterozygous), so the
possible combinations of offspring bred from these are:
 There is more variation in this cross, with a 3:1 ratio of tall : short, meaning each
offspring has a 75% chance of being tall and a 25% chance of being short
 The F2 generation is produced when the offspring of the F1 generation (pure-breeding
parents) are allowed to interbreed
‘Show the results of crossing a heterozygous plant with a short plant’

 The heterozygous plant will be tall with the genotype Tt

 The short plant is showing the recessive phenotype and so must be homozygous recessive
- tt
 The results of this cross are as follows:

A cross between a heterozygous plant with a short plant

 In this cross, there is a 1:1 ratio of tall to short, meaning a 50% chance of the offspring
being tall and a 50% chance of the offspring being short

How to construct Punnett squares

 Determine the parental genotypes

 Select a letter that has a clearly different lower case, for example: Aa, Bb, Dd
 Split the alleles for each parent and add them to the Punnett square around the outside
  Fill in the middle four squares of the Punnett square to work out the possible genetic
combinations in the offspring
 You may be asked to comment on the ratio of different allele combinations in the
offspring, calculate a percentage chances of offspring showing a specific characteristic or
just determine the phenotypes of the offspring
 Completing a Punnett square allows you to predict the probability of different outcomes
from monohybrid crosses

Exam Tip
You should always write the dominant allele first, followed by the recessive allele.If you are
asked to use your own letters to represent the alleles in a Punnett square, try to choose a letter
that is obviously different as a capital than the lower case so the examiner is not left in any doubt
as to which is dominant and which is recessive.For example, C and c are not very different from
each other, whereas A and a are!

Identifying an Unknown Genotype

 Breeders can use a test cross to find out the genotype of an organism showing the
dominant phenotype
 This involves crossing the unknown individual with an individual showing the recessive
phenotype - if the individual is showing the recessive phenotype, then its genotype must
be homozygous recessive
 By looking at the ratio of phenotypes in the offspring, we can tell whether the unknown
individual is homozygous dominant or heterozygous

‘A plant breeder has a tall plant of unknown genotype. How can they find out whether it is
homozygous dominant or heterozygous?’

 The short plant is showing the recessive phenotype and so must be homozygous recessive
- tt
 Determining genotypes from offspring

 If the tall plant is homozygous dominant, all offspring produced will be tall
 If the tall plant is heterozygous, half the offspring will be tall and the other half will be
short

Family Pedigrees

 Family pedigree diagrams are usually used to trace the pattern of inheritance of a specific
characteristic (usually a disease) through generations of a family
 This can be used to work out the probability that someone in the family will inherit the
genetic disorder
 A family pedigree chart

 Males are indicated by the square shape and females are represented by circles
 Affected individuals are red and unaffected are blue
 Horizontal lines between males and females show that they have produced children
(which are shown underneath each couple)
 The family pedigree above shows:
o both males and females are affected
o every generation has affected individuals
o That there is one family group that has no affected parents or children
o the other two families have one affected parent and affected children as well

CODOMINANCE AND SEX LINKED CHARACTERISTICS

Codominance

 Inheritance of blood group is an example of codominance

 There are three alleles of the gene governing this instead of the usual two
 Alleles IA and IB are codominant, but both are dominant to IO
 I represents the gene and the superscript A, B and O represent the alleles
 IA results in the production of antigen A in the blood
 IB results in the production of antigen B in the blood
 IO results in no antigens being produced in the blood
 These three possible alleles can give us the following genotypes and phenotypes:

 We can use genetic diagrams to predict the outcome of crosses that involve codominant
alleles:
‘Show how a parent with blood group A and a parent with blood group B can produce offspring
with blood group O’

Punnett square showing the inheritance of Blood Group

 The parent with blood group A has the genotype IAIO

 The parent with the blood group B has the genotype IBIO
 We know these are their genotypes (as opposed to both being homozygous) as they are
able to produce a child with blood group O and so the child must have inherited an allele
for group O from each parent
 Parents with these blood types have a 25% chance of producing a child with blood type O

Sex-Linked Characteristics

 When alleles that control a particular characteristic are found on the sex chromosomes,
we describe the inheritance that results as ‘sex linked’
 In almost all cases, there are only alleles on the X chromosome as the Y chromosome is
much smaller
 Because males only have one X chromosome, they are much more likely to show sex-
linked recessive conditions (such as red-green colour blindness and haemophilia)
 Females, having two copies of the X chromosome, are likely to inherit one dominant
allele that masks the effect of the recessive allele
 A female with one recessive allele masked in this way is known as a carrier; she doesn’t
have the disease, but she has a 50% chance of passing it on to her offspring
 If that offspring is a male, he will have the disease
 The results of a cross between a normal male and a female who is a carrier for
colourblindness is as follows:

Pu
nnett square showing the inheritance of colourblindness, an X-linked condition

 In the cross above, there is a 25% chance of producing a male who is colourblind, a 25%
chance of producing a female carrier, a 25% chance of producing a normal female and a
25% chance of producing a normal male