Scribd
Upload
10 views2 pages

Engineering Graphics

The document outlines the examination details for the Engineering Graphics subject at Dr. Babasaheb Ambedkar Technological University, including instructions, question formats, and marks distribution. Students are required to attempt five questions from various topics related to engineering graphics, including projections and isometric views. The exam is scheduled for June 18, 2024, with a maximum score of 60 marks and a duration of 4 hours.

Uploaded by

contactanshustories
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views2 pages

Engineering Graphics

The document outlines the examination details for the Engineering Graphics subject at Dr. Babasaheb Ambedkar Technological University, including instructions, question formats, and marks distribution. Students are required to attempt five questions from various topics related to engineering graphics, including projections and isometric views. The exam is scheduled for June 18, 2024, with a maximum score of 60 marks and a duration of 4 hours.

Uploaded by

contactanshustories
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DRBABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY,LONERE,RAIGAD

Regular & Supplementary Summer Examination- 2024

Branch Name: Common to All Branches Subject Code: BTES203G

Subject Name: Engineering Graphics Semester-II

Max Marks: 60 Duration: 04Hrs Date: 18/06/2024


Instructions:-
1. Attempt any FIVE questions out of the following.
2. Assume the suitable data wherever necessary.
3. Mention the Question numbers correctly on the drawing sheets.
Marks
Q.1 Attempt the following questions
a. Draw the Regular Pentagon of 50mm side by any method. CO-1 05
b. Redraw the following sketch and show dimensions with any one of the CO-1 04
correct method (Fig-1)

Fig-1

c. Draw the Front view & Top view of following points CO-2 03
i) Point A 15mm below HP and 20mm behind VP
ii) Point B in VP and 20mm above HP
iii) Point C in HP and 25mm in front of VP

Q.2 Draw the Front view in X- direction , Top view and Side view of the CO-4 12
following sketch by First angle Method of Projection (Fig.2)

Fig:2
Q.3 Attempt the following questions
a. Horizontal Line AB 75mm long is inclined to VP by 400 . Point A is 20mm CO-2 04
above HP and 15mm in front of VP. Complete the projections and find its
Plan Length and Elevation Length.

b. A regular Pentagon of 40mm side is resting in VP on one of its edges with CO-2 08
0
surface inclined to VP by 45 . Complete the projections.
OR
c. A Rectangular Plate of 70 x 40 mm sides resting on edge ,is inclined in such a CO-2 08
way that it is observed as a Square of 40x 40 mm in the TOP VIEW.
Complete the projections and find inclination of plate with HP.

Q.4 Attempt the following question (Any One)


a. A triangular pyramid of base edges 50 mm and slant edges 70 mm is resting CO-3 12
on one of its base edges in HP in such a way that triangular face contained by
that base edge is Vertical and resting base edge is inclined to VP by 450.

b. A cone of base diameter 50 mm and height of Axis 75 mm is lying down on CO-3 12


one of its generators in HP with top view of the axis inclined to VP by 40 0.
Complete the projections if apex is towards the observer.

Q.5 Attempt the following question (Any One)


a. A cylinder of base diameter 50mm and its axis 80 mm is inclined to HP by CO-3 12
500. An auxiliary inclined plane, passing through the highest point of the top
circumference & axis at point 20mm from the top , cuts the cylinder. Draw
the FV, TV view and true shape of the section.

b. A true shape of the cut section of Cube 50mm side is Rhombus with largest CO-3 12
possible major diagonal. Complete the projections and show FV, TV and true
shape of the section.
Q.6 Draw the Isometric View of the following object (Fig-3).
CO-4 12

Fig-3

********************

You might also like