PROPOSED

UPDATED COURSE CURRICULUM

(To be effective from Spring semester, 2013)

FACULTY OF MODERN SCIENCE

DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING
(CSE)

UNDERGRADUATE PROGRAM
Bachelor of Science in Computer Science & Engineering (B.Sc. in CSE)

LEADING UNIVERSITY
SYLHET

Submitted To:
University Grants Commission (UGC)

Page 1 of 29
 CONTENTS
UPDATED COURSE CURRICULUM (Syllabus)
FACULTY OF MODERN SCIENCE
Department: Computer Science & Engineering (CSE)

Program: Bachelor of Science in Computer Science & Engineering

(B.Sc. in CSE)

Contents
Undergraduate Programs …………………………………………………………………. 3

Objective and Goal ………………………………………………………………………….. 3

Requirements for admission into the CSE program ..……………………………. 3

Admission test ………………………………………………………………………………… 4

Grading System……………………………………………………………………………….. 4

Degree requirement and graduation time …………………………………………… 4

Course Evaluation ……………………………………………………………………………. 4

Course Numbering System ……………………………………………………………….. 5

Symbols and Abbreviations 5

…………………………………………………………………………………

Category of courses ………………………………………………………………………… 6

Summary of Courses ………………………………………………………………………… 7

List of courses …………………………………………………………………..…………….. 7

Course Detailed Syllabus/Course Synopsis …………………………………………. 14

Page 2 of 29
Undergraduate Programs
Leading University, Bangladesh offers degree in all branches of academic
programs such as Business, Engineering, Economics, and Science & Technology and
if any desired field needed for the society. Degrees will be granted at the
undergraduate, graduate level including doctoral degrees. Initially the university will
limit itself to offer in a limited number of subjects. As the university grows and as
institutional capacity is build up, the degrees will be awarded in a larger number of
disciplines.
Undergraduate Programs are designed to graduate business and technology
professionals directed toward employment in business, industry or related areas. A
maximum of 198 semester hours and a minimum of 120 semester hours are
required depending upon the academic background in English and Math of the
student. All degrees have unique requirements; students should know all
regulations and the particular requirements for each of the degrees.

Department of Computer Science and Engineering

Objective and Goal

The Department of Computer Science and Engineering offers Bachelor of Science in
Computer Science and Engineering. Computer plays a crucial and in fact, obligatory
role in all fields of modern sciences. Computer Science and Engineering has
established itself as one of the most important branches of engineering. All the
students of Computer Science and Engineering are requested to have a balanced
knowledge of digital electronics, computers, micro-processors and programming.
The new generation of computer engineers is encouraged to undertake research
and development activities in the above areas and this department is committed to
the study and analysis of fundamental as well as applied problems. Throughout the
study programs, considerable emphasis is placed on the development of methodical
procedure for analysis and design, and on the responsible use of technology.

Degree offering Department

Our degree-offering department is the Department of Computer Science and
Engineering, which is under Faculty of Modern Science.

Duration of a semester
Proposed University’s academic programs operate on tri-mister system (14 weeks
per academic semester including exams). For 1 credit theory course will be equal to
minimum 12-13 hours of actual lecture time per semester of a tri-mister system. For
1 credit Sessional course minimum of 24-hours of actual Sessional works per
semester of a tri-mister system will be required. That means theory classes will
have a minimum duration of 1 hour for 1 credit hour and each Sessional
class will have a minimum duration of 2-hours for 1 credit hour and 3
hours for 1.5 credit hour. Course credit is assigned according to the number of
in-class contact hours associated with the course.

CSE Undergraduate Admission

For CSE program, students without mathematics, Physics and Chemistry in HSC/A
level are not eligible for the admission.

Requirements for admission into the CSE program

At least a second division or minimum CGPA 2.5 out of 5.0 GPA in the S.S.C and
H.S.C. examination, or five subjects O-level and three major subjects (Math,
Physics and Chemistry) in A-level education are required for admission into CSE
program of the Leading university. Students obtaining diploma in engineering from

Page 3 of 29
Bangladesh Technical Education Board (BTEB) or equivalent with a GPA of 2.5 or
above, or at least second division are eligible for admission. Students having GED
are not eligible to get admission in CSE program.

Admission test
All incoming freshmen are required to take evaluation test. For students intending
to get admitted in CSE program will have to pass the admission test of English,
Mathematics, Physics, Chemistry and General Knowledge.

Grading System
All course work is graded according to a unified grading system as shown in the
following chart.
Numerical Grade Letter Grade Grade Point
80% and above A+ (A Plus) 4.00
75% to less than 80% A (A regular) 3.75
70% to less than 75% A- (A minus) 3.50
65% to less than 70% B+ (B Plus) 3.25
60% to less than 65% B (B regular) 3.00
55% to less than 60% B- (B minus) 2.75
50% to less than 55% C+ (C Plus) 2.50
45% to less than 50% C (C regular) 2.25
40% to less than 45% D 2.00
Less than 80% F 0.00

**Uniform grading system is provided by UGC

Degree requirement and graduation time

At least 152 academic credits are required for CSE degree. Proposed University’s
academic programs operate on semester system (14 weeks per academic semester
including exams). For 1 credit theory course will be equal to minimum 12-hours of
actual lecture time per semester of a tri-mister system. If students continue to take
13 to 15 credit hours regularly in every semester, student will complete our
proposed CSE program in four (4) years. Students who need to raise their
Computer, English and Math skills to the required level may be required to earn
more than 152 credits. Minimums of 12 credit hours are considered a full
undergraduate load in one academic semester. A student is considered to be a full
time student if s/he continuously enrolled for at least two semesters per academic
year. The maximum time to complete CSE degree program is 1.5 times the normal
length of the program unless mitigating circumstances, such as illness, exist.

According to UGC,
The minimum CGPA for remaining in University degree programs:
Undergraduate: 2.5 (a C average); Graduate Programs: 3.0 (B average)
We follow the exact instructions of UGC in each sector in our Institution.

Grade Points
A student’s semester grade point average is determined by dividing the total
number of grade points by the total number of hours attempted. Grade point
totals are calculated by multiplying the number of credit hours of a course by
the number of points for the corresponding grade received. A student’s
grade point average will be determined by dividing the total number of grade

Page 4 of 29
points by the total number of hours attempted with the exception of courses
in which marks of “CR”, “W”, “WA”, “R”, “AU”, “S”, “U”, “I”, are received.

Course Evaluation:
There will be one midterm worth 30% and final examination worth 40%. 5% for
class attendance, 10% for tutorials, 5% for viva, 10% for quizzes, assignments,
and presentations. Any missed exam/test will earn zero (0). Academic dishonesty, such as
Misbehaver in class, copying exam/test or letting another student copy may result “F” grade
in the course.
Policy
 Each course will consist no less than 100 marks or points. There are no fixed
criteria in terms of test scores. The allocation of 100% marks/ points will be
taken according to the marks distribution mentioned above.

 The nature of questions should be of varied nature such as MCQ, short type,
Broad type, Case Study; Specific problems etc. or in any other form as the tutors
deem it necessary to judge the comprehensive study as well as the merit of the
students.

 Questions for semester final will be submitted in two sets in different form at
least two weeks ahead of Exam dates as these questions will be sent to
Moderation Board.

 Duration of the Mid-Term Tests from 1 to 1½ hour and Final Examinations may
be 2 to 3 hours respectively depending on the nature of questions.

 According to the schedule of examinations final examinations are held in all

courses upon the completion of each semester’s work. No one is to be excused
from the final examinations.

 Course Instructor/Tutor shall conduct their respective tests and Exams. Question
papers are to be taken back from the students at the end of each exam.

Course Numbering System

Course numbers in the University system indicate course level:
0xxx ................. No credit
1xxx...............Introductory level—first year---primarily for freshmen and sophomores
2xxx………….. Second year---for sophomores.
3xxx ................. Intermediate level—primarily for juniors and seniors, but open to
sophomores with a C average overall and in prerequisites.
4xxx ..................Advanced level—open to juniors, seniors, and graduate students.
8xxx ................. Graduate level—open only to students registered in the Graduate
School.
xxx0 ................. May be repeated for credit, if a CLA course (course numbers in
other University divisions do not always follow this system).
3970 or 5970.... Directed studies courses.
3980 or 5980.... Directed instruction courses.
3990 or 5990.... Directed research courses.

** The second digit stands for the usual semester the student should be advised,
third and fourth digit stands for subject code, odd numbers are for theory courses
and even numbers are for sessionals.

Symbols and Abbreviations

Prefixes ..............Two-, three-, or four-letter department designator (e.g., ENG for
English).

Page 5 of 29
Category of courses
• English: Three courses (6 credit hours)
English Reading, English Composition, Spoken English.

• General Education (GED): Five Courses (15 credit hours)

Students will have to complete five GED Courses in the following academic areas:
History, Anthropology, Geography, Sociology, Political Science, Psychology,
International Relations, Art, Literature, Music, and Philosophy. There is a list of
our GED courses from which students can choose five courses.

• Basic Sciences: Two Courses (7 credit hours)

Courses in the following academic areas qualify as science credits: Chemistry and
Physics. Total basic science courses are 7 credit hours. Each theory course is of 3
credit hours and each 1-hour Sessional credit is equal to 2 contact hours.

• Interdisciplinary Engineering Courses: 7 courses (25 credit hours)

Students will have to complete seven interdisciplinary Engineering Courses in the
following academic areas: Electrical Engineering, Mechanical Engineering and Civil
Engineering. There is a list of courses from where students will choose
seven courses.

• Program Core courses: 39 courses (84 credit hours including Sessional)

Students will have to complete 39 Courses including Sessional courses as Computer
Science and s core courses.

• Mathematics: 5 Courses (15 credit hours)

Courses in the following academic areas qualify as mathematics credits: Differential
and Integral Calculus, Coordinate Geometry and Vector Analysis, Ordinary and
Partial Differential Equations, Linear Algebra, Probability and Statistics.

Leading University, Sylhet

Department of Computer Science and Engineering

Computer Science & Engineering Program

Curriculum for B. Sc. in Computer Science & Engineering (Proposed)

Page 6 of 29
 Summary of Courses
(To be effective from Spring semester, 2013)

Types of Courses No. Of Courses Credit Hours

English Courses 02 06
GED courses 05 15
Basic Science Courses 02 07
Mathematics Courses 05 15
Inter-disciplinary Engineering
07 25
Courses
Program core courses 21 74
Option I (Specialized courses) 01 03
Option II (Specialized courses) 01 03
Project / Thesis 02 04
Total 46 152

List of Courses
Interdisciplinary Courses
Contact
Credit Prerequisite
Course Code Course Title Hours /
Hours Courses
Week

English Courses (Two courses - 6 credit hours)

ENG-1111 English Reading and Speaking 3 3 N/A
ENG-1311 English Writing and Listening 3 3 ENG-1111
Total 6 6

General Education Courses (Any five courses - 15 credit hours)

ART-1111 Bangladesh Studies 3 3 N/A
ECON-2211 Principals of Economics 3 3 N/A
ART- 2213 Professional Ethics 3 3 N/A
ART-2311 Introduction to Sociology 3 3 N/A
MGT-2315 Introduction to Business 3 3 N/A
ACC-2111 Principles of Accounting 3 3 N/A
MGT-3211 Industrial Management 3 3 N/A
ART-1215 Public Administration 3 3 N/A
ART-1217 Political Science 3 3 N/A

Basic Science Courses (Two courses - 7 credit hours)

PHY-2211 General Physics 3 3 N/A
PHY-2212 General Physics Sessional 1 2 N/A
CHEM-2311 Chemistry 2 2 N/A
CHEM-2312 Chemistry: Sessional 1 2 N/A

Page 7 of 29
 Total 07 09

Mathematics Courses (5 courses - 15 credit hours)

MATH-1111 Differential and Integral Calculus 3 3 N/A
MATH-1213 Linear Algebra & Complex Analysis 3 3 N/A
MATH-1315 Differential Equations and Fourier Analysis 3 3 MATH-1111
MATH-2111 Co-Ordinate Geometry and Vector Analysis 3 3 N/A
MATH-2213 Probability and Statistics 3 3 N/A
Total 15 15
Other Engineering Discipline Courses (25 credit hours)
Contact
Credit Prerequisite
Course Code Course Title Hours /
Hours Courses
Week
EEE-1111 Electrical Circuits I 3 3 N/A
EEE-1112 Electrical Circuits I Sessional 1 2 N/A
EEE-1213 Electrical Circuits II 3 3 N/A
EEE-1214 Electrical Circuit Simulation Laboratory 1 2 N/A
EEE-1315 Electronics I 3 3 EEE-1213
EEE-1316 Electronics I Sessional 1 2 EEE-1214
CE-2110 Engineering Drawing 1.5 3 N/A
EEE-2317 Digital Electronics 3 3 N/A
EEE-2318 Digital Electronics Sessional 1.5 3 N/A
Microprocessor, Assembly Language and
EEE-3211
Computer Interfacing
3 3 N/A
Microprocessor, Assembly Language and
EEE-3212
Computer Interfacing Sessional
1 2 N/A
EEE-4127 VLSI I 2 2 EEE-2317
EEE-4128 VLSI I Sessional 1 2 EEE-2318
Total 25 33

List of Core Courses

Contact
Credit Prerequisite
Course Code Course Title Hours /
Hours Courses
Week
CSE-1111 Introduction to Computers 2 2 N/A
CSE-1112 Introduction to Computers Sessional 1 2 N/A
CSE-1213 Computer Programming 3 3 N/A
CSE-1214 Computer Programming Sessional 1 2 N/A
CSE-1215 Discrete Mathematics 3 3 N/A
CSE-1315 Data Structures 3 3 CSE-1213
CSE-1316 Data Structures Sessional 1 2 CSE-1214
CSE-2117 Computer Algorithms and Complexity 3 3 CSE-1315
CSE-2118 Computer Algorithms and Complexity Sessional 1 2 CSE-1316
CSE-2213 Object Oriented Programming 3 3 CSE-1213
CSE-2214 Object Oriented Programming Sessional 1 2 CSE-1214
CSE-2319 Database Management System 3 3 N/A
CSE-2320 Database Management System Sessional 1 2 N/A
CSE-3111 Numerical Methods 3 3 N/A
CSE-3112 Numerical Methods Sessional 1 2 N/A
CSE-3113 Operating System 2 2 N/A
CSE-3114 Operating System Sessional 1 2 N/A
CSE-3115 Computer Networks 3 3 N/A
CSE-3116 Computer Networks Sessional 1 2 N/A
CSE-3117 Computer Architecture and Design 3 3 N/A
CSE-3213 Data Communication 3 3 N/A

Page 8 of 29
CSE-3227 Theory of Computation 3 3 N/A
CSE-3311 System Analysis, Design and Development 3 3 N/A
CSE-3312 System Analysis, Design and Development Sessional 1 2 N/A
CSE-3315 Compiler Design and Construction 3 3 CSE-3227
CSE-3316 Compiler Design and Construction Sessional 1 2 N/A
CSE-3317 Java Programming 3 3 CSE-2213
CSE-3318 Java Programming Sessional 1 2 CSE-2214
CSE-3321 Software Engineering 2 2 N/A
CSE-4111 Management Information System 3 3 N/A
CSE-4113 Computer Graphics 3 3 CSE-1213
CSE-4114 Computer Graphics Sessional 1 2 CSE-1214
CSE-4119 Artificial Intelligence 3 3 N/A
CSE-4211 Web Technologies 3 3 CSE-2319
CSE-4212 Web Technologies Sessional 1 2 CSE-2320
CSE-4800 Project/Thesis (Part-I) 1 2
CSE-4801 Project/Thesis (Part-II) 3 6
Total 78 96

List of Specialized Elective Courses

Option-I for Eleventh Semester (Any one course and Sessional (if any), to be taken)
Contact
Credit Prerequisite
Course Code Course Title Hours /
Hours Courses
Week
CSE-4213 Optical Fiber Communication 3 3 CSE-3213
CSE-4215 Distributed Systems 2 2
CSE-4216 Distributed Systems: Sessional 1 2
CSE-4217 Open Source Tools & Techniques 2 2
CSE-4218 Open Source Tools & Techniques: Sessional 1 2
Object Oriented Software Development Using
CSE-4219 2 2
UML
Object Oriented Software Development Using
CSE-4220 1 2
UML: Sessional
CSE-4221 Simulation & Modeling 2 2
CSE-4222 Simulation & Modeling: Sessional 1 2
CSE-4223 Neural Network & Fuzzy Logic 3 3
CSE-4225 Advanced Algorithms 3 3
CSE-4227 Graph Theory & Applications 2 2
CSE-4228 Graph Theory & Applications: Sessional 1 2
CSE-4229 Computer Aided Design & Manufacturing 2 2
CSE-4230 Computer Aided Design & Manufacturing 1 2
CSE-4231 Data Warehousing & Data Mining 2 2

Option-II for Twelfth Semester (Any one course and Sessional (if any), to be taken)
Contact
Credit Prerequisit
Course No. Course Title Hours /
Hours e Courses
Week
CSE-4311 Cellular Mobile & Satellite Communication 3 3

Page 9 of 29
CSE-4313 Image Processing and Computer Vision 2 2
CSE-4314 Image Processing and Computer Vision Sessional 1 2
CSE-4315 Computer Security & Cryptography 3 3
CSE-4317 Human Computer Interaction 3 3
CSE-4319 Advanced Operating Systems 2 2
CSE-4320 Advanced Operating Systems: Sessional 1 2
CSE-4321 Decision Support Systems 2 2
CSE-4322 Decision Support Systems: Sessional 1 2
CSE-4323 Introduction to Robotics 2 2
CSE-4324 Introduction to Robotics: Sessional 1 2
CSE-4325 Multimedia Communications 3 3

Prepared by

Academic Committee
Department of Computer Science and Engineering
Leading University

Semester-wise Course Distribution

First Semester (1st Year 1st Semester)
Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week

Page 10 of 29
ENG-1111 English Reading and Speaking 3 3 N/A
ART-1111 Bangladesh Studies 3 3 N/A
MATH-1111 Differential and Integral Calculus 3 3 N/A
CSE-1111 Introduction to Computers 2 2 N/A
CSE-1112 Introduction to Computers: Sessional 1 2 N/A
EEE-1111 Electrical Circuits I 3 3 N/A
EEE-1112 Electrical Circuits I Sessional 1 2 N/A
Total 16 17

Second Semester (1st Year 2nd Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
MATH-1213 Linear Algebra and Complex Analysis 3 3 N/A
CSE-1213 Computer Programming 3 3 N/A
CSE-1214 Computer Programming: Laboratory 1 2 N/A
CSE-1215 Discrete Mathematics 3 3 N/A
EEE-1213 Electrical Circuits II 3 3 EEE-1111
EEE-1214 Electrical Circuit Simulation Laboratory 1 2 EEE-1112
Total 14 16

Third Semester (1st Year 3rd Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
ENG-1311 English Writing & Listening 3 3 N/A
MATH-
1315
Differential Equations and Fourier Analysis 3 3 MATH-1111

EEE-1315 Electronics I 3 3 EEE-1213

EEE-1316 Electronics Circuit Simulation Laboratory 1 2 EEE-1214
CSE-1315 Data Structures 3 3 CSE-1213
CSE-1316 Data Structures: Sessional 1 2 CSE-1214
Total 14 16

Fourth Semester (2nd Year 1st Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
ACC-2111 Principles of Accounting 3 3 N/A
MATH-
2111
Co-Ordinate Geometry and Vector Analysis 3 3 N/A
CE-2110 Engineering Drawing 1.5 3 N/A
CSE-2117 Computer Algorithms & Complexity 3 3 CSE-1315
CSE-2118 Computer Algorithms & Complexity Sessional 1 2 CSE-1316
Total 11.5 14

Fifth Semester (2nd Year 2nd Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week

Page 11 of 29
ECON-2211 Principles of Economics 3 3 N/A
MATH-
2213
Probability and Statistics 3 3 N/A
PHY-2211 General Physics 3 3 N/A
PHY-2212 General Physics Laboratory 1 2 N/A
CSE-2213 Object Oriented Programming 3 3 CSE-1213
CSE-2214 Object Oriented Programming: Sessional 1 2 CSE-1214
Total 14 16

Sixth Semester (2nd Year 3rd Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
ART-2311 Introduction to Sociology 3 3 N/A
CHEM-2311 Chemistry 2 2 N/A
CHEM-2312 Chemistry Laboratory 1 2 N/A
EEE-2317 Digital Electronics 3 3 EEE-1315
EEE-2318 Digital Electronics Laboratory 1.5 3 EEE-1316
CSE-2319 Database Management System 3 3 N/A
CSE-2320 Database Management System: Sessional 1 2 N/A
Total 14.5 18

Seventh Semester (3rd Year 1st Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
CSE-3111 Numerical Methods 3 3 N/A
CSE-3112 Numerical Methods: Sessional 1 2 N/A
CSE-3113 Operating System 2 2 N/A
CSE-3114 Operating System: Sessional 1 2 N/A
CSE-3115 Computer Networks 3 3 N/A
CSE-3116 Computer Networks Laboratory 1 2 N/A
CSE-3117 Computer Architecture & Design 3 3 N/A
Total 14 17

Eighth Semester (3rd Year 2nd Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
MGT-3211 Industrial Management 3 3 N/A
Microprocessor, Assembly Language & Computer
EEE-3211
Interfacing
3 3 EEE-2317
Microprocessor, Assembly Language & Computer
EEE-3212
Interfacing Laboratory
1 2 EEE-2318
CSE-3213 Data Communication 3 3
CSE-3227 Theory of Computation 3 3 N/A
Total 13 14

Ninth Semester (3rd Year 3rd Semester)

Page 12 of 29
 Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
CSE-3311 System Analysis, Design and Development 3 3 N/A
CSE-3312 System Analysis, Design and Development: Sessional 1 2 N/A
CSE-3315 Compiler Design & Construction 3 3 CSE-3227
CSE-3316 Compiler Design & Construction: Sessional 1 2 N/A
CSE-3317 Java Programming 3 3 CSE-2213
CSE-3318 Java Programming: Sessional 1 2 CSE-2214
CSE-3321 Software Engineering 2 2 N/A
Total 14 17

Tenth Semester (4th Year 1st Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
EEE-4127 VLSI I 2 2 N/A
EEE-4128 VLSI I Laboratory 1 2 N/A
CSE-4111 Management Information System 3 3 N/A
CSE-4113 Computer Graphics 3 3 CSE-1213
CSE-4114 Computer Graphics Sessional 1 2 CSE-1214
CSE-4119 Artificial Intelligence 3 3 N/A
Total 13 15

Eleventh Semester (4th Year 2nd Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
CSE-4211 Web Technologies 3 3 CSE-3219
CSE-4212 Web Technologies Sessional 1 2 CSE-3220
Specialized
course
One course from Option I 3 3
CSE-4800 Project / Thesis (Proposal) 1 2
Total 8 10

Twelfth Semester (4th Year 3rd Semester)

Credit Contact
Prerequisite
Course No. Course Title Hours Hour/
Courses
Week
Specialized
course
One course from Option II 3 3
EEE-4801 Project / Thesis (Finalize & Submission) 3 6
Total 6 12

Course Description of CSE Program

Page 13 of 29
ENG-1111 English Reading and Speaking
The course aims at building the ability of the students in correct reading fiction texts,
non-fiction texts, speaking with a good pronunciation and the course is designed so that
students will have a good idea about making requests, giving commands, inviting people,
giving advice, suggestions, asking questions, making comments and presentation
building.

ENG-1311 English Writing and Listening

The course aims at building the ability of the students in correct writing, composition and
presentation of English. The emphasis of the course is on correct and independent writing
and correct listening to individual phoneme and word pronunciation, listening to
monologue, listening to dialogue and conversation.

ART-1111 Bangladesh Studies

Bangladesh: History Society, Culture, Geo-politics & Economics.
Pakistan: East West Relationship, Development of internal colonialism, The constitution
of 1956, 1962, Centre-province relationship, Martial Law Regimes, Nation Building,
State Building, Basic Democracy and its impact in Politics.
Movement: Language Movement of 1952, Constitutional movement of 1962, War 1965,
Six point Formula and Movement of 1966, Mass Movement of 1968-69 (Non
cooperation movement and struggle for constitutional autonomy), Election of 1970.
Emergence of Bangladesh: Army crackdown and genocide, liberation war: causes and
various dimensions.
Political Process of Bangladesh: Democratic Practice and constitutional
experimentations in Bangladesh, Military Rule, Civilization Process, power and
functions of the organs of government (executive, legislature and judiciary).
Administration of Bangladesh: Bureaucracy and its characteristics and functions,
structure and organization of Bangladesh secretariat and attached departments, planning
commission and Bangladesh public service, local government. Independence movement,
Constitutional land mark, Emergence of Bangladesh, Political economy of Bangladesh,
Bangladesh agriculture, Unemployment in Bangladesh, Bangladesh industry, Economic
planning, Social security in Bangladesh.

ACC-2111 Principles of Accounting

Introduction: Financial Accounting-definition and Scope, objectives of Financial
Accounting, Keeping Terms used in accounting, users of accounting information and
limitations of Financial Accounting. Conceptual Framework: Accounting Concepts,
Principles and Conventions, Accounting Policies, Accounting as a measurement
discipline, valuation Principles, accounting estimates. Recording of transactions:
Voucher system; Accounting Process, Journals, Subsidiary Books, Ledger, Cash Book,
Bank Reconciliation Statement, Trial Balance. Depreciation: Meaning, need &
importance of depreciation, methods of charging depreciation. Preparation of final
accounts: Preparation of Trading and Profit & Loss Account and Balance Sheet of sole
proprietary business. Computerized Accounting: Computers and Financial application,
Accounting Software packages. An overview of computerized accounting system -
Salient features and significance, Concept of grouping of accounts, Codification of
accounts, maintaining the hierarchy of ledger, Generating Accounting Reports.

ART-1215 Public Administration

Public Personnel Administration: Meaning Scope and Importance of Personnel
Administration, Approaches & Challenges, Historical Development of Personnel
Administration. Pioneers of Personnel Administration: Fredrick w. Taylor, Henry Fayol
and George Elton Mayo. Human Resource Planning Definition, Elements, Importance,

Page 14 of 29
 Human Resource Planning Process, Approaches. Personnel Agency: Types, functions
and Importance. Procurement: Recruitment, selection and placement Transfer,
Promotion. Development: Training, Importance, Employee training process, types and
methods of training, career management. Appraisal: job analysis, job evolution,
performance appraisal, objective and methods of performance appraisal, MBO.
Compensation: wage and salary, compensation plan. Integration: Motivation: Definition,
importance, theories of motivation. Maintenance: grievances procedure, disciplinary
action. Separation: retirement employee benefit. Industrial relation & communication:
industrial relation, industrial disputes, means of settlement of industrial disputes, trade
union, collective bargaining. Public personnel research.

ART-1217 Political Science

Making of Bangladeshi Constitution. Constituent Assembly: Composition and Working.
Preamble and Salient Features of Indian Constitution. Fundamental Rights and
Fundamental Duties, Directive Principles of State Policy. President and Prime Minister.
Parliament. Supreme Court, Judicial Review and Judicial Activism. Governor, Chief
Minister and State Legislatures. Panchayati Raj and Municipal Governments. Nature of
Federal System and Centre-State Relations. Election Commission and Electoral Reforms,
National Commission for Scheduled Castes, National Commission for Scheduled Tribes.

ART-2213 Professional Ethics

Human values: morals, values and ethics, integrity, work ethic, service learning, civic
virtue, respect for others, living peacefully, character, spirituality. Engineering ethics:
senses of ‘engineering ethics’, variety of moral issue, types of inquiry, moral dilemmas,
moral autonomy, Kohlberg’s theory, Gilligan’s theory, consensus and controversy,
models of professional roles, theories about right action, self-interest, customs and
religion, uses of ethical theories. Engineering as social experimentation: engineering as
experimentation, engineers as responsible experimenters, codes of ethics, a balanced
outlook on law, the challenger case study. Safety, responsibilities and rights: safety and
risk, assessment of safety and risk, risk benefit analysis and reducing risk, the three-mile-
island and Chernobyl case studies. Collegiality and loyalty, respect for authority,
collective bargaining, confidentiality, conflicts of interest, occupational crime,
professional rights, employee rights, intellectual property rights, discrimination. Global
issues: multinational corporations, environmental ethics, computer ethics, weapons
development, engineers as managers, consulting engineers, engineers as expert witnesses
and advisors, moral leadership, sample code of ethics like asme, asce, ieee.

ECON-2211 Principles of Economics

Introduction: Definition of economics, scope and utility of studying economics.
Microeconomics: The theory of demand and supply and their elasticity, price
determination, nature of an economic theory, applicability of economic theories to the
problems of developing countries. Indifference curves technique, Marginal utility
analysis. Production: Production function, types of productivity, the nature of Isoquants
and Isocosts, rational region of production of an engineering firm, Euler’s theorem.
Market: Concepts of market and market structure, cost analysis and cost function, small-
scale production and large-scale production, optimization, theory of distribution.
Macroeconomics: Savings, investment, employment, national income analysis, inflation,
monetary policy, fiscal policy and trade policy with reference to Bangladesh. Economics
of development: Dimensions of development, relevance of theory, the employment
problem, human resource development. Economics of planning: Planning and market,
policy models, planning experience.

ART-2311 Introduction to Sociology

The Sociological Perspective, Development of Sociology, Sociological Research, Culture
and Society, Socialization, Social Structure, Social Institutions: The Family, Social

Page 15 of 29
 Stratification, Social Inequality, Social Institutions: Government, Economy, and the
Environment.

MGT-2315 Introduction to Business

The course outlines the philosophy, objectives, activities and responsibility of business
enterprises and familiarizes with business enterprises, business terminology and business
environment. Included in the course are forms and procedure of business organization,
procedure for business start up, sources of finance, agencies involved in business start up,
major business decisions, associations in business world, major business functions and
careers in business. Functional areas of business such as marketing, production, finance,
accounting, personnel, etc. are discussed, includes a project work on how to set up a
business.

MGT-3211 Industrial Management

UNIT I: Concepts of Management and Organisation – Functions of Management –
Evolution of Management Thought : Taylor’s Scientific Management, Fayol’s Principles
of Management, Douglas Mc-Gregor’s Theory X and Theory Y, Mayo’s Hawthorne
Experiments, Hertzberg’s Two Factor Theory of Motivation, Maslow’s Hierarchy of
Human Needs – Systems Approach to Management.
UNIT II: Designing Organisational Structures : Basic concepts related to Organisation -
Departmentation and Decentralisation, Types of mechanistic and organic structures of
organisation (Line organization, Line and staff organization, functional organization,
Committee organization, matrix organization, Virtual Organisation, Cellular
Organisation, team structure, boundaryless organization, inverted pyramid structure, lean
and flat organization structure) and their merits, demerits and suitability.
UNIT III: Plant location, definition, factors affecting the plant location, comparison of
rural and urban sites-methods for selection of plant- Matrix approach. Plant Layout –
definition, objectives, types of production, types of plant layout – various data analyzing
forms-travel chart.
UNIT IV: Work study - Definition, objectives, method study - definition, objectives,
steps involved- various types of associated charts-difference between micromotion and
memomotion studies. Work measurement- definition, time study, steps involved-
equipment, different methods of performance rating- allowances, standard time
calculation. Work Sampling – definition, steps involved, standard time calculations,
differences with time study.
UNIT V: Materials Management-Objectives, Inventory – functions, types, associated
costs, inventory classification techniques-ABC and VED analysis. Inventory Control
Systems-Continuous review system-periodical review system. Stores Management and
Stores Records. Purchase management, duties of purchase of manager, associated forms.
UNIT VI: Introduction to PERT / CPM : Project management, network modeling-
probabilistic model, various types of activity times estimation-programme evaluation
review techniques- Critical Path-probability of completing the project, deterministic
model, critical path method (CPM)-critical path calculation-crashing of simple of
networks.
UNIT VII: Inspection and quality control, types of inspections - Statistical Quality
Control-techniques-variables and attributes-assignable and non assignable causes-
variable control charts, and R charts, attributes control charts, p charts and c charts.
Acceptance sampling plan- single sampling and double sampling plans-OC curves.
Introduction to TQM-Quality Circles, ISO 9000 series procedures.
UNIT VIII: Introduction to Human Resource Management, Functions of HRM, Job
Evaluation, different types of evaluation methods. Job description, Merit Rating.-
difference with job evaluation, different methods of merit ratings, wage incentives,
different types of wage incentive schemes. Marketing, marketing vs selling, marketing
mix, product life cycle.
TEXT BOOKS:
1. Amrine, Manufacturing Organization and Management, Pearson, 2nd Edition, 2004.
2. Industrial Engineering and Management O.P. Khanna Dhanpat Rai.

Page 16 of 29
PHY-2211 General Physics
Heat and Thermodynamics: Principle of temperature measurements: platinum resistance
thermometer, thermo-electric thermometer, pyrometer; Kinetic theory of gases:
Maxwell’s distribution of molecular speeds, mean free path, equipartition of energy,
Brownian motion, Van der Waal’s equation of state, review of the First Law of
thermodynamics and its application, reversible and irreversible processes, Second Law of
thermodynamics, Carnot cycle; Efficiency of heat engines, Carnot’s Theorem, entropy
and disorder, thermodynamic functions, Maxwell relations, Clausius-Clapeyron
Equation, Gibbs Phase Rule, Third Law of thermodynamics. Structure of Matter:
Crystalline and non-crystalline solids, single crystal and polycrystal solids, unit cell,
crystal systems, co-ordinations number, crystal planes and directions, sodium chloride
and CsCl structure, packing factor, Miller indices, relation between interplanar spacing
and Miller indices, Bragg’s Law, methods of determination of interplanar spacing from
diffraction patterns; Defects in solids: point defects, line defects; Bonds in solids, inter-
atomic distances, calculation of cohesive and bonding energy; Introduction to band
theory: distinction between metal, semiconductor and insulator. Waves and Oscillations:
Differential equation of a simple harmonic oscillator, total energy and average energy,
combination of simple harmonic oscillations, Lissajous’ figures, spring-mass system,
calculation of time period of torsional pendulum, damped oscillation, determination of
damping co-efficient, forced oscillation, resonance, twobody oscillations, Reduced mass,
differential equation of a progressive wave, power and intensity of wave motion,
stationary wave, group velocity and phase velocity, architectural acoustics, reverberation
and Sabine’s formula. Physical Optics: Theories of light; Interference of light, Young’s
double slit experiment; Displacements of fringes and its uses; Fresnel Bi-prism,
interference at wedge shaped films, Newton’s rings, interferometers; Diffraction of light:
Fresnel and Fraunhoffer diffraction, diffraction by single slit, diffraction from a circular
aperture, resolving power of optical instruments, diffraction at double slit & N-slits-
diffraction grating; Polarization: production and analysis of polarized light, Brewster’s
law, Malus law, Polarization by double refraction, retardation plates, Nicol prism, optical
activity, polarimeters, polaroid.

PHY-2212 General Physics Sessional

LIST OF EXPERIMENTS
1. Experiment with spring:
a. To verify Hooke’s law for a spring.
b. To determine the modulus of rigidity of the material of the spring.
c. To observe the harmonic motion of the spring for different loads attached to it.
2. To determine the acceleration due to gravity ‘g’ by means of a compound pendulum.
3. To determine the surface tension of water by capillary rise method.
4. To determine rigidity modulus of the material of a wire by dynamic method.
5. To determine the coefficient of viscosity of water at room temperature.
6. To determine Young’s modulus of the material of a wire by Searle’s apparatus.
7. To verify Ohm’s law by using a tangent galvanometer.
8. To determine the resistance of a Voltmeter.
9. To determine the horizontal component of the earth’s magnetic field and the magnetic
moment of a bar magnet by magnetometer.
10. To determine the end-corrections of a meter bridge and hence to determine the
specific resistance of wire.

CHEM-2311 Chemistry
Atomic structure, quantum numbers, electronic configuration, periodic table; Properties
and uses of noble gases; Different types of chemical bonds and their properties;
Molecular structure of compounds; Selective organic reactions; Different types of
solutions and their compositions; Phase rule, phase diagram of monocomponent system;
Properties of dilute solutions; Thermo-chemistry, chemical kinetics, chemical equilibria;

Page 17 of 29
 Ionization of water and pH concept; Electrical properties of Solution.

CHEM-2312 Chemistry Sessional

Volumetric analysis: acid-base titration, oxidation-reduction titration, determination of
Fe, Cu, Ca volumetrically.

MATH-1111 Differential and Integral Calculus

Differential Calculus: Functions of one variable & their plots, Limit, Continuity,
Differentiability, Successive differentiation, Leibnitz’s theorem, Rolle’s, Mean-value,
Taylors, Maclurin’s Theorem, Langrange’s & Cauchy’s forms of Reaminder, Expansion
of functions in Taylor’s & Maclaurin’s series, Evaluation of Indeterminate form by
L’Hospital’ rule, Maxima and Minima of a function, Points of inflexion, Tangent,
Normal, Curvature & radius of curvature, Functions of several variables, Partial
derivatives, Euler’s theorem, Jacobians, Directional derivatives.
Integral Calculus: Physical meaning of a integration of function, different techniques of
integrations, Integration by parts, Definite integration, Integration by summation of
series, Fundamental theorem of integral calculus.

MATH-1213 Linear Algebra & Complex Analysis

Matrix: Definition, Types of Matrices, Rank of the Matrix, Equivalence Matrix, System
of linear equations
Linear Algebra : Different types of matrices, Algebraic operations on matrices, Adjoint
& inverse of a matrix, Orthogonal & Unitary matrices, System of linear equations,
Vector space, Linear transformations, Characteristic roots & vectors, Diagonalization of
matrices.
Complex Variable: De-Moiver’s theorem & its application, Functions of a complex
variable, Limit, Continuity & Differentiability of a function of complex variable,
Analytic functions, Cauchy-Riemann equations, Cauchy’s theorem, Singularity & poles,
Residues, Simple contour integration.

MATH-1315 Differential Equations and Fourier Analysis

Differential equation: Ordinary differential equation, Formation of DE(=Differential

equation), Degree & order of DE, Solutions of 1 st & 2nd order ordinary DE, Separable
equations, Linear equations, Homogeneous linear equations with constant coefficients,
Solution by variation of parameters, Undermined coefficients & operator method,
Solution by series.
Laplace Transformation: Definition of LT(=Laplace transform), LT of different
functions, First Shift theorem, Inverse transform, Linearity, Use of first shift theorem &
Partial functions, Transform of derivative, Transform of an integral, Heaviside unit
function, The 2nd shift theorem, Periodic functions, Convolutions, Solution of ordinary
differential equation by Laplace transform.
Fourier Analysis: Real & Complex form, Finite transform, Fourier integral, Fourier
series & convergence of Fourier series, Fourier transform & uses in solving boundary
value problem.

MATH-2111 Co-ordinate Geometry and Vector Analysis

Two dimensional geometry: Transformation of co-ordinates, translation and rotation of
axes, invariants, polar co-ordinates, pairs of straight lines, homogeneous second degree
equation, general second degree equation, angle between pairs of straight lines, bisectors
of angles, general equation of second degree.
Three dimensional geometry: Co-ordinates in three dimensions, direction cosines and
direction ratios, planes, straight lines, spheres.
Vector Analysis: Vector components, Vector components in spherical & cylindrical
system, Derivative of vector, Vector operators, Del, Gradient, Divergence and Curl.
Page 18 of 29
 Their physical significance, Vector integration, Line, Surface & Volume integration,
Green’s & Stoke’s theorem and their applications.

MATH-2213 Probability and Statistics

Frequency distribution of data, Population and sample, Collection and representation of
statistical data, tabulation of data, class interval, Discrete, continuous and cumulative
distribution, histograms, frequency polygon, graphical representation of data, Statistical
measures, Sampling, correlation theory, Probability, Stochastic processes.

EEE-1111 Electrical Circuits I

Electrostatics, Magnetism, Resistance and capacitance, resistors and capacitors in series
and parallel connections, Ohm’s law, Kirchoff’s laws, charging and discharging of a
capacitor in RC circuit, Faraday’s law, Inductance and inductor, LR circuit, alternating
current: RMS and peak values of A.C. quantities, A.C. circuits with R,L & C, R-L-C
series and parallel circuits, resonance in ac circuits, transformer, multiphase circuits, star-
delta conversion, Network theorem: superposition theorem, Thevenin’s theorem,
Norton’s theorem, maximum power transfer theorem.

EEE-1112 Electrical Circuits I Sessional

Verification of Ohm’s law, Kirchoff’s voltage law, Kirchoff’s current law, Thevenin’s
theorem, R-L-C circuits, star-delta conversion.

EEE-1213 Electrical Circuits II

Transient Analysis of AC circuits: RL, RC and RLC Circuits, First Order and Second
Order Transient Response, AC Circuit Analysis and the Phasor Concept, The Impedance
and Admittance of the R, L and C Components, Average and rms values of Voltages and
Current, Sinusoidal Steady State Analysis.

EEE-1214 Electrical Circuit Simulation Laboratory

Power Supply design, half wave, full wave rectification with diode applications.

EEE-1315 Electronics I
Introduction to semiconductors: P and N type semiconductors, P-N junctions under
forward and reverse biases. Diode: Load lines, graphical analysis of diode circuits,
equivalent circuits and frequency response, diode applications, half and full-wave
rectifiers, bridge rectifiers, clippers, clampers, voltage multipliers, voltage regulators,
characteristics of different types of diodes, transistors.

EEE-1316 Electronics I Sessional

Instruments: Measuring Instruments and how to use them, Ohm’s law and network
theorems: Circuits using resistors, capacitors, inductors and diodes, Transistor
amplifier: Using Transistor in a circuit as an amplifier, Transistor as a switch: Using
transistor in circuit as an amplifier. Use of op-amp: Familiarizing with Operational
Amplifier and building as audio amplifier using op-amp, Digital Circuits: Using Logic
gates in digital circuits to make flip flops, counters, registers, adders and other
components, Power supply construction: Making a 5 Volt power supply.

EEE-2317 Digital Electronics

Number system and Codes: General way of representing numbers, decimal, binary, octal
and hexadecimal number systems and their representation conversion of number from
one system to another, compliment in number system, different Codes: BCD,
Page 19 of 29
 alphanumeric, Gray, Excess-3, ASCII and error detection codes. Digital Logic: Boolean
algebra, De-Morgans Theorem logic gates and their truth tables, Canonical form of logic
expression, simplification of logic expression: algebraic method, K-Map, realization by
using NAND/NOR gates, adders, subtractors, code converters, magnitude comparator
encoder, decoder, multiplexer, de-multiplexer, ROM, RAM, Programmable Logic Array
(PLA), D/A & A/D converters with applications.

EEE-2318 Digital Electronics Sessional

Logic gates, flip-flops, full adder, counters, registers, decoders, encoders, multiplexers.

EEE-3211 Microprocessor, Assembly Language and Computer Interfacing

This course introduces the basics of computer organization and assembly language
programming. Topics covered include: basic building blocks of a computer, bus system,
microprocessor architecture, memory organization, programming model of a
microprocessor, instructions set, and assembly language programming concepts.
Mnemonics and opcodes, instruction sets for 8085 and 8086, assembly language
programming, arithmetic instructions, logical instructions, loops and arrays, procedures,
macros, interrupts, use of assembly language for simple system development.
Fundamental units of a microcomputer: Input unit, CPU, Microprocessor, Memory unit,
Output unit, Bus structures, and Processor clock. Memory devices: ROM, RAM,
EPROM, Microcomputer programming concepts and timing. Architecture of a general
purpose microprocessor, INTEL 8086 microprocessor, Internal architecture, Register
structure, Addressing modes, Pin diagram and pin descriptions, Timing diagram,
Instruction sets, Memory interface, I/O interface, Bus interface, DMA, Interrupts, Analog
interfacing and industrial control, An overview of Intel 80186 through Pentium models.

EEE-4127 VLSI I
P-MOS, N-MOS and C-MOS transistors structures, characteristics and operations, MOS
inverter, Fabrication process, Stick diagram, Design rules and layout, Logic circuit
design, Dynamic MOS circuits, Memory, Register, Counter, Architecture and
implementation of PLDS and PLA, Reliability aspects, Ultra-fast VLSI circuits. P-M0S,
N-MOS and C-MOS transistors structures, characteristics and operations, MOS inverter,
Fabrication process, Stick diagram, Design rules and layout, Logic circuit design,
Dynamic MOS circuits, Memory, Register, Counter, Architecture and implementation of
PLDS and PLA, Reliability aspects, Ultra-fast VLSI circuits.

CSE-1111 Introduction to Computers

Introduction: History and development of computer Science, fundamental concepts, types
of computers, a variety of computer applications (Word, Excel, Access, LAN).
Hardware: CPU, motherboards, storage media, I/O devices. Software: Basic concepts,
types of software. Operating system: Types, Importance, components, and basic
functions. Application software: Programming languages, Applications Packages.
Maintenance: Power supply, UPS, Virus protections.

CSE-1112 Introduction to Computers Sessional

Students should be given a good practical idea about MS Word, Excel, Access and
PowerPoint.

CSE-1213 Computer Programming

Introduction to Programming Languages: Machine language, assembly language, mid-
level language, high-level language, language translation, interpreter, assembler and
compiler. Programming Concepts: Algorithm and logic, flow-chart, keywords, syntax,
data object, data types, declaration, operator, identifier, expressions and statements,
Page 20 of 29
 structure, functions, built-in-functions, I/O functions, control statements, branching,
looping, subprogram, storage management. The objective of this course is to enable the
students to know the keywords and basic programming techniques in different structured
languages.

CSE-1214 Computer Programming Sessional

Input and output operations, operators and expressions decision making and branching,
use of one, two and multi dimensional arrays, decision making and looping, character
strings, functions, pointers and dynamic memory allocations, file management, the
preprocessor statements.

CSE-1215 Discrete Mathematics

Set theory, relations, functions, vectors, and matrices, graph theory, planar graphs, and
trees, directed graphs and binary trees, combinational analysis, algebric systems,Number
theory, languages, grammars and automata, ordered sets lattices, propositional calculus,
Boolean algebra, logic gates, lattice and group theory, cyclic group, permutation groups,
symmetry groups, quetients, homomorphism, basic structure theory, set and
combinatories, prepositional and predicate logic, mathematical reasoning and proof
techniques, theories with induction, counting and countability, graphs and trees,
morphisms of algebric structures, modeling computation, program correctness and
verification.

CSE-1315 Data Structures

Introduction, data structures, data structure operations, mathematical notations and
functions, algorithmic notations, control structures, linear data structures, arrays, records,
pointers, linked lists, stacks, recursions, queues and their applications, non-linear data
structures- trees, graphs and their applications; Sorting and searching- insertion sort,
selection sort, merging, merge-sort, radix sort, searching and hashing.

CSE-1316 Data Structures Sessional

Laboratory works based on Data Structure.

CSE-2213 Object Oriented Programming

Introduction to object oriented programming, C++/JAVA/Python as an object oriented
language, Introduction to C++/JAVA, Basic Concepts of Object-Oriented Programming :
Object, Class, Inheritance, Encapsulation, Polymorphism, Expressions in C++/JAVA,
Statements and Control Structures, Arrays, Functions in C++/JAVA, Classes and
Objects, Static Data Members and Member Functions, Arrays of Objects and Friend
Functions, Copy Constructor, Dynamic Constructors, Constructing 2-Dimensional
Arrays, Operator Overloading and Type Conversions, Introduction to Inheritance, Single
Inheritance, Multiple Inheritance, Multilevel Inheritance, Pointers and Virtual Functions,
Virtual Functions and Polymorphism, C++/JAVA Streams and Stream Classes, I/O
Operations, Managing Output with Manipulators, Classes for File Stream Operations,
File Pointers and their Manipulations, File Operations : Insertion, Updating, Exception
Handling.

CSE-2214 Object Oriented Programming Sessional

Creating Classes and objects, Encapsulation, Static Data members and member functions,
Arrays of objects and friend functions, Function Overloading and Polymorphism,
Constructors and Destructors, Inheritance: Single, Multiple, Multilevel, Virtual functions
and Polymorphisms, File Operations.

Page 21 of 29
CSE-2117 Computer Algorithms and Complexity
Techniques for analysis of algorithms, Method for the design of elegant algorithms:
divide and conquer, greedy method, dynamic programming, backtracking, branch and
bound, Basic search and traversal techniques, graph algorithms, Algebraic simplification
and transformations, Lower bound theory, NP-hard and NP-complete problems.

CSE-2118 Computer Algorithms and Complexity Sessional

Sessional classes will be conducted base on the topics covered in CSE-2117.

CSE-2319 Database Management System

Introduction- purpose of database systems, view of data, data models, database
languages, transaction management, storage management, database users, overall system
structure; Entity relationship model- design issues, mapping constraints, keys, ER
diagram, weak entities, extended ER features; Relational model; SQL- basic structures,
set operations, aggregate functions, null values, nested subqueries, derived relations,
views, joined relations, data definition language, embedded SQL; Integrity constraints-
domain constraints, referential integrity, assertions, triggers, functional dependencies;
Relational database design- decomposition, normalization, normal forms; Object oriented
databases; Indexing and hashing; Concurrency control; Recovery system; Distributed
databases.

CSE-2320 Database Management System Sessional

The course covers advance topics in databases like query processing and optimization,
database security and transaction management, to learn how to develop database
applications: Creation of Tables- Simple tables, tables with constraints, use of foreign
keys and use of data base triggers; Use of SQL/PLSQL- Usage of SQL commands, usage
of built in functions, simple queries, nested queries, procedures and functions; Interfacing
with database- Using forms of data entry; Reports- Using report write.

CSE-3111 Numerical Methods

Numerical analysis: Errors in numerical calculations. Error : Definitions, sources,
examples. Propagation of Error. A general error formula. Root finding : The bisection
method and the iteration method, the method of false position. Newton-raphson method.
Methods of approximation theory : Polynomial interpolation: Lagrange form, divided
formula for interpolation. Solution of systems of Linear equations: Gaussian
elimination. The pivoting strategy, Iteration method solution of tridiagonal systems.
Numerical solution of ordinary differential equations: Euler's method (including
modified form), Rnge-Kutta method. Numerical Integration : Trapezoidal method.
Simpson's method. Weddle's method; Eigen value problems for matrices, Use of
computer to implement projects in numerical methods.

CSE-3113 Operating Systems

An introduction to the structure of modern operating systems, History of operating
systems, Operation system concept, Computer system structure, Operation system
structure, Introduction to processes, Inter-process communication, Threads, CPU
scheduling, Deadlocks, Memory management, I/O systems, Storage management,
Secondary storage management, Files systems, Protection, Distributed system structure,
Distributed coordination, Distributed file systems, Study of a representative operating
system : Windows NT, UNIX.

CSE-3114 Operating Systems Sessional

Introduction: UNIX system concepts, History, C programming under UNIX, standard C
libraries, Single and multi-module programming, UNIX file dependency system, UNIX

Page 22 of 29
 archive system, UNIX source code control system, UNIX profiler, UNIX debugging,
UNIX system programming. File manipulation process creation, Data manipulation, Inter
process communication, communication protocols, UNIX domain protocols, Socket
addresses, Elementary and advanced socket. UNIX shells, Shell functionality, Shell
programming. System calls, System versus transport layer interface. Transport Endpoint
addresses, TLI functions, Standard Routines.

CSE-3115 Computer Networks

An introductory course on theory and practice of computer networking. Topics includes;
Introduction: Goals, Applications, Network structures, Network architectures, OSI,
Connection oriented and connectionless services, Service primitives. Public networks,
ARPANET, SNA, Local Area Networking: Technology, Architecture, Topology,
Wireless LAN. LAN system: Ethernet and Fast Ethernet. Token Ring and FDDI. ATM
LAN. Wide Area Networking: Circuit switching and Packet switching. ISDN, Frame
Relay and cell relay. Data Link Layer: Service provided to the network layer, Framing,
Error control, Flow control, Error detection and correction. Communication Architecture
and Protocols: Network reference model, TCP/IP protocol, Internetworking, Internet
protocol, Routing protocol, Transport protocols. Network Security: Privacy with
conventional encryption, Digital signature. Distributed Applications.

CSE-3116 Computer Networks Sessional

Client/Server computing on a LAN and LAN Operating Systems, Examples – Linux, Widows
2000 server, MS Workgroups etc. Introductions to web servers, mail servers, authentication
servers etc.

CSE-3117 Computer Architecture and Design

Processor design: Introduction, processor organization, information representation,
number formats, instruction sets, instruction formats, instruction types, fixed point
arithmetic, addition, subtraction, multiplication, division, ALU design: basic ALU
organization, floating point arithmetic, arithmetic processors. Control design: instruction
sequence, instruction interpretation, Hardware control: CPU control unit, micro
programmed control, basic concepts, control memory optimization, multiplier control
unit, micro programmed computers. Memory organization, review of primary and
secondary memories, memory hierarchies, high speed memories, interleaved memories,
cache memory. System organization, communications, bus control, I/O systems,
programmed i/o device, DMA, interrupts, i/o processors. Parallel processing: basic
concepts, types of parallel processors, performance consideration, pipeline processors
and systolic arrays, pipeline structures, vector supercomputer, data flow computers,
multiprocessor architectures, fault-tolerant computers. RISC processors: introduction to
data addressing modes, condition codes, register sets, brief study of RISC processor.

CSE-3213 Data Communication

Introduction to communication, Analog and digital data, spectrum and bandwidth,
transmission impairments, data rate channel capacity, Transmission media: twisted pair,
coaxial and fiber optic cables, Manchester and differential Manchester encoding, ASK,
FSK, PSK, QPSK encoding, modems, error detection techniques, Data encoding, Data
transmission, Data link, Data communication networking.

CSE-3227 Theory of Computation

Formal models of automata, language and their relationship. Finite automata and regular
expressions, properties of regular sets, context-free grammars, push-down automata,
properties of context-free languages, Turing machines, halting problem, undecidability
and computability, recursive function theory, Chomsky hierarchy, deterministic context-
free languages, closure properties families of languages, computational complexity
theory, intractable problems, application in parsing, pattern matching and the design of
Page 23 of 29
 efficient algorithms. Finite state machines, introduction to sequential circuits, basic
definition of finite state model, memory elements and their excitation functions, synthesis
of synchronous sequential circuits, iterative network, definition and realization of Moor
and Melay machines.

CSE-3311 System Analysis, Design and Development

Scope of system analysis. Information system concepts, System development life-cycle,
Requirement analysis, Specification requirements. System design: Selection, Initial
design, detailed design, data structure design, design documentation, Implementation and
integration, Maintenance, Applications. Requirement and Specifications, Tools and
Techniques, Coding, Program Verification, Testing and debugging, Programming
environment, Distribution and Maintenance, Metrics, Management, design.

CSE-3315 Compiler Design and Construction

Fundamentals of compilers, lexical analysis, regular expressions, regular languages,
syntax analysis, syntax analysis, context free grammar, bottom-up parsing, syntactic error
recovery, syntax-directed definitions, attributes evaluation, abstract syntax trees, symbol
tables, type checking, semantic checks for inheritance/subtyping and for overlapping,
generation of intermediate code, generation of un-optimized target code. Introduction to
code optimization, control flow graphs, live-variable analysis, allocation optimized
register, global common sub expression elimination, dominators, loop in control flow
graphs, def-use and use-def chains, loops invariant, code motion, partial redundancy
elimination, constant propagation, optimizing object-oriented programs, copy
propagation, phase ordering of optimizations, instruction scheduling, optimization for
memory hierarchies.

CSE-3317 Java Programming

Introductory concept of Programming and Approaches, Importance of Java Programming
and Object Oriented Concept, Introduction to NetBeans IDE and simple programs,
Character Set, Identifiers, Variables, Constants, Data types, Operators, Expressions,
Statement, Program Flow, Control Statement, Selection (If Structure), Rest of Selection
(Nested if, Switch), Break Statement, Console input and related conversion methods,
Loop, Access specifier, Instance variables, constructor, Methods, Polymorphism,
Inheritance, Abstract Methods and class, Exception and String Handling, GUI
Components, Event Handling, Threads and Multithreading, History of JAVA class
libraries, Methods: Program module in JAVA, math class method, method definitions,
JAVA API packages, automatic variables, recursion, method overloading, method of
applet class. Array: Declaring and allocating arrays, passing arrays to methods, sorting
arrays, Object based programming and object oriented programming in JAVA, Java
Database Connectivity.

CSE-3318 Java Programming Sessional

Simple Java programs, Introduction to NetBeans IDE, Control structures, Constructor,
Methods, Polymorphism, Inheritance, Exception handling, Abstract methods and class,
GUI Components, Threads and Multithreading, Recursion, Method overloading, Array
operations, Java Database Connectivity.

CSE-3321 Software Engineering

The course needs the background of programming and programming languages, data
structure, project management, economic feasibility studies, and systems concept. The
topics include software development process paradigms, software requirement analysis,
design, development, testing, implementation and maintenance of software, software
reusability, documentation, manuals and topics related to software project management.

Page 24 of 29
CSE-4111 Management Information System
An introduction to Management Information System, Information System for
Management Activity and Functional Sub-systems, Structure of MIS, Organization and
management concepts, Concepts of Information, Systems Concepts, Computer Hardware
and Software for MIS, Communications technology for MIS, Data Resource
Management, Decision making process, Human as information processors, Concepts of
Planning and Control, Support systems for planning, control and decision making,
Support systems for Management, Development of Information System Plan, Database
requirements, User Interface requirements, Developing and Implementing Applications,
Quality Assurance and Evaluations of Information systems, Organizing and Managing
Information Resources function.

CSE-4113 Computer Graphics

Introduction: History of computer graphics, Applications, Graphics hardware and
software, fundamental idea behind modern computer graphics. Geometric
Transformation: 2D and 3D Rotation and Translation. Projective Transformation:
Orthogonal and Perspective Projection. Vector: Normal Vector and its impact on 3D
graphics, View Vector. Raster Graphics: Line Drawing, Polygon Filling, Scan
Conversion. Shade models: Light models, Diffused Light, Ambient Light, Specular
Light, Flat Shading, Lambert Shading, Phong Shading. Ray Tracing: Basic idea, Hidden
Surface Removal, z-buffering. Texture Mapping: Texture Fundamentals, Texture
Blending, Curves and Surfaces: Types of Curves, Cubic-Spline, -Spline, NURBS,
Animation: Real time animation, Hardware for real-time animation, Character
Animation, Computer Games, Movies, Image Formats: PPM, BMP, Image Based
Rendering, Morphing: View-morphing, Volume Metamorphosis.

CSE-4114 Computer Graphics Sessional

2D and 3D rotation and translation, orthogonal and perspective, polygon filling, scan conversion,
line drawing and computer games.

CSE-4119 Artificial Intelligence

An introductory description to the major subjects in artificial intelligence. Introduction to
AI languages: LISP, PROLOG. Heuristic search, Knowledge representation and
computer interference, Computational logic, knowledge engineering and expert systems,
Machine Learning, Natural language processing, Pattern recognition, Computer vision,
Robotics Application, social impacts. Inconsistencies and Uncertainties, Probabilistic
reasoning, Knowledge acquisition.

CSE-4211 Web Technologies

Topics include HTML and DHTML concepts, HTML tag emulation, commands, HTML
form design, homepage design, online request, dynamic function, buttons, and animation.
Common gateway interface programming: Java Script, programming concept using Java
Script, embedding Java Script in HTML. Multimedia: Web graphics, animation,
compressed graphics, Socket programming, socket for client server architecture, multi
socket RMI, servlet programming. Online applications: Monitoring user events, database
connectivity, and plug-ins.

CSE-4213 Optical Fiber Communication

Optical fiber: Nature of list, Optics low, Optical fiber mode, Single mode fiber, Graded
index structure. Signal degradation in optical fibers: Attenuation, Signal distortion,
Pulse Broadening mode coupling. Optical sources: LED, Laser diodes, Light source
linearity modal partition and reflection noise. Power launching and Coupling: Source
to fiber power launching, lansing scheme, fiber to fiber joints, Splicing fiber connectors.
Photodetectors: Basic principle, photodelectors noise, response time, Avalauch
Page 25 of 29
 multiplication noise. Optical receiver operation: Receiver configuration, digital
receiver performance preamplifiers. Digital transmission system: Point to point link,
line coding, Eye pattern, system performance. Advanced systems and techniques:
WDM, Local area networks, Optical amplifier, Photonic switching.

CSE-4215 Distributed Systems

Distributed object systems, Retrieving and caching of distributed information,
Distributed data replication and sharing, Performance issues, Algorithms for deadlock
detection, Concurrency control and synchronization in distributed system, Models for
distributed computation, Networking facilities and resource control and management
methods in network and distributed operating systems, Collaborative applications, Wide
area network computing, Web based commerce, Agent systems and Market based
computing.

CSE-4216 Distributed Systems Sessional

Laboratory Works Based on CSE-4215.

CSE-4219 Object Oriented Software Development Using UML

Survey of the paradigm including analysis, design and implementation, demonstrate the
importance of modeling in the software development life cycle, become conversant with
the UML notation and symbols, understand the object-oriented approach to analyzing
and designing systems and software solutions, employ the UML notation to create
effective and efficient system designs. The Unified Modeling Language (UML) provides
a common, standard notation for recording both analysis models and design artifacts.

CSE-4220 Object Oriented Software Development Using UML Sessional

Laboratory Works Based on CSE-4219.

CSE-4221 Simulation & Modeling

Simulation modeling basics: systems, models and simulation; Classification of
simulation models; Steps in a simulation study; Concepts in discrete-event simulation:
event-scheduling vs. process-interaction approaches, time-advance mechanism,
organization of a discrete-event simulation model; Continuous simulation models;
Combined discreet-continuous models; Monte Carlo simulation; Simulation of queuing
systems.
Building valid and credible simulation models: validation principles and techniques,
statistical procedures for comparing real-world observations and simulated outputs, input
modeling; Generating random numbers and random variates; Output analysis. Simulation
languages; Analysis and modeling of some practical systems.

CSE-4222 Simulation and Modeling Sessional

Laboratory Works Based on CSE-4221.

CSE-4223 Neural Network & Fuzzy Logic

Hopfield Model: Associative Memory, Stochastic Networks, Correlated Patterns.
Introduction: Neuroscience, History and Issues. Optimization Problems: Weighted
Matching Problem, Traveling Salesman Problem. Neural Network: Feed-Forward
Network, Multi-Layer Network. Unsupervised Learning: Hebbian Learning,
Competitive learning.

CSE-4225 Advanced Algorithms

Page 26 of 29
 Randomized Algorithms: Las Vegas and Monte Carlo Algorithms; Randomized Data Structures:
Skip Lists; Amortized Analysis: Different methods, Applications in Fibonacci Heaps; Lower
Bounds: Decision Trees, Information Theoretic Lower Bounds, Adversary Arguments;
Approximation Algorithms: Approximation Schemes, Hardness of Approximation; Fixed
Parameter Tractability: Parameterized Complexity, Techniques of designing Fixed Parameter
Algorithms, Examples; Online Algorithms: Competitive Analysis, Online Paging Problem, k-
server Problem; External Memory Algorithms; Advanced Data Structures: Linear and Non-linear
Methods.

CSE-4227 Graph Theory and Applications

Graphs: simple graphs, digraphs, sub-graphs, vertex-degrees, walks, paths and cycles; Trees,
spanning trees in graphs, distance in graphs; Complementary graphs, cut-vertices, bridges and
blocks, k-connected graphs; Euler tours, Hamiltonian cycles, Chinese Postman Problem,
Traveling Salesman Problem; Chromatic number, chromatic polynomials, chromatic index,
Vizing’s theorem, planar graphs, perfect graphs.

CSE-4228 Graph Theory and Applications Sessional

Laboratory Works Based on CSE-4227.

CSE-4229 Computer-Aided Design and Manufacturing

Computer-aided engineering software that addresses the hierarchy of engineering
analysis, design, and decision evaluation is developed with state-of-the-art computer
tools. Linear graph theory is applied to the modeling of physical networks. Operator
overloading, dynamic polymorphism, graphical user interfaces, dynamic link libraries,
and multiple threaded programs are considered.

CSE-4230 Computer-Aided Design and Manufacturing Sessional

Laboratory Works Based on CSE-4229.

CSE-4231 Data Warehousing and Data Mining

Introduction; Data warehousing and OLAP technology for data mining; Data preprocessing; Data
mining primitives, languages and systems; Descriptive data mining: characterization and
comparison; Association analysis; Classification and prediction; Cluster analysis; Mining complex
types of data; Applications and trends in data mining.

CSE-4311 Cellular Mobile and Satellite Communication

Orbital aspects: Tracking and control of communication satellite, Launch vehicles:
Ariance, Space shuttle, Propagation characteristics: Attenuation and noise, Frequency
bands, Satellite transponders: Intermediation low noise amplifiers: Satellite antennas,
Earth station configuration, High power amplifiers antenna, LNA: Link design, Multiple
access, FDMA, TDMA. CDMA, SPADE, Spot beam antenna, INTELSATs, INSAT.

CSE-4313 Image Processing and Computer Vision

Introduction to image processing and computer vision: Representation of image, a basic
image processing system, relationship to human visual system, computer vision
applications, signal processing and pattern recognition. Discrete Fourier transform: One
dimensional Fourier transform, properties of DIT, Fast Fourier Transform(FFT)
algorithms, two dimensional FFT, two dimensional filtering using FFT, properties of
digital images, two dimensional infinite impulse response filters.
Two dimensional system; Techniques of image acquisition; Image enhancement; Image
restoration and data compression; Remote sensing application.

Page 27 of 29
CSE-4317 Human Computer Interaction
Topics include the underlying theories of human-computer interaction, design principles,
Guidelines, evaluation, and social and individual impact. Applications studies include
the World Wide Web. Practical work: Project using a language such as Delphi or Visual
Basic.

CSE-4319 Advanced Operating Systems

An Overview of operating system functions, Information management, Process
management, Memory management and secondary storage space management, Parallel
processing, distributed operating systems, Introduction, Design issues, Distributed shared
memory, Algorithms of implementing distributed scheduling, Failure recovery and Fault
tolerance, Protection& Security, Resource security & Protection, Data Security,
Cryptography, multiprocessor operating systems, Introduction, Architecture,
Interconnection Network for multiprocessing caching, Structure of multiprocessing
operating system, threads, various types of threads, Design issues, Case study of any
machine operating systems, database operating system, Introduction requirements of a
Data base operating system, concurrency control Introduction, Transactions, Conflicts,
Transaction processing, The problem of concurrency control, Searializability theory;
Logs, serial logs, Log equivalence, sample concurrency control algorithms. Object
oriented operating systems and its characteristics, Case study of OS such as Unix OS,
Netware OS, Windows-NT, etc.

CSE-4320 Advanced Operating System Sessional

Laboratory works based on Advanced Operating System.

CSE-4321 Decision Support System

Introduction to decision support systems; DSS components; Decision making and DSS;
DSS software and hardware; developing DSS; DSS models; types of DSS; group DSS;
executive information systems; data mining; artificial intelligence and expert systems.

CSE-4322 Decision Support System Sessional

Laboratory works based on Decision Support System.

CSE-4323 Introduction to Robotics

Introduction to Robotics. Vision: Projection, Convolution, Edge Detection, Image
Interpretation and ENS. Mobility - (mobile robot platforms). Inertial Navigation
Systems. Graph Search. Controls (and encoders). Motion Planning: Potential Functions,
Roadmaps, Cell Decompositions. Sensing and Sensors. Human Robot Interaction.
Forward and Inverse Kinematics: Transformation Matrices. Inverse Kinematics:
Geometric methods, Algebraic methods. Non-holonomic constraints.

CSE-4324 Introduction to Robotics Sessional

Laboratory works based on Introduction to Robotics.

CSE-4325 Multimedia communication

Multimedia system-introduction; Coding and compression standards; Architecture issue
multimedia; Operating systems issues in multimedia - real-time OS issues,
synchronization, interrupt handling; Database issues in multimedia – indexing and
storing multimedia data, disk placement, disk scheduling, searching for multimedia

Page 28 of 29
document; Networking issues in multimedia - Quality-of-service guarantees, resource
reservation traffic specification, happing, and monitoring, admission control;
Multicasting issues; Session directories; Protocols for controlling sessions; Security
issues in multimedia -digital water – making partial encryption schemes for video
streams; multimedia applications – audio and video conferencing, video on demand,
voice over IP.

Page 29 of 29