USB guitar interface

USER MANUAL
Contents

Table of Contents
Contents2
English3
iRig USB3
Register your iRig USB3
1. iRig USB overview4
2. Installation and setup5
2.1 Setup5
3. iRig USB status LED5
4. Setting the input gain5
5. Amplifier output jack5
5.1 FX/THRU switch6
6. Headphone output jack6
7. Troubleshooting7
8. Specifications7
Warranty8
Support and more info8

­­­­­­­­­2
English

iRig USB
Thank you for purchasing iRig USB.

Your package contains:

• iRig USB
• USB cable

iRig USB is the new entry of the iRig guitar interface family. This new iRig interface is packed in an all-new
enclosure and sports some new important features.
We still find all the I/Os that are made of the iRig interfaces the first choice for on-the-go guitarists: one 1/4
inches instrument input with dedicated gain control, a 1/4 inches Amp output with dual mode operation, and a
1/8 inches headphone output.
The Amp out can work in two modes: you can set the AMP out jack to carry the signal (processed), coming out
from your device, back out to an instrument amplifier. Or, you can set the AMP out jack to carry the same signal
that is put into the Instrument input. This mode is typically used to send the instrument signal that is plugged
into the Instrument jack back out to an instrument amplifier or other unbalanced input.

Register your iRig USB

By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will
be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also
keeps you informed of all the latest software updates and IK products.
Register at: www.ikmultimedia.com/registration

­­­­­­­­­3
English

1. iRig USB overview

1
5

6 7

3 4

3 4

1. Status LED - This LED turn on blue when the iRig USB is connected to an host and turns red when the
input signal is clipping.
2. Gain knob - This knob controls the level of the input signal.
3. Instrument input - 1/4” (6.35mm) jack type - Connect your instrument here (e.g., guitar).
4. Amplifier output - 1/4” (6.35mm) jack type - You can connect an external amplifier to iRig USB thanks to
the “Amplifier output jack”. This allows you to send the processed signal (i.e. from a rig inside your mobile
device) or a direct unprocessed signal, out to your amplifier or other unbalanced input.
5. FX/THRU switch - This switch allows you to select the type of output that is sent thru the “Amplifier output
jack.”
6. Headphone output - 1/8” (3.5mm) jack type - connect here your headphones.
7. Host connection - USB Type C - allows you to connect iRig USB to your host device.

­­­­­­­­­4
English

2. Installation and setup

2.1 Setup
1. Connect the included USB-C cable to the iRig USB.
2. Connect the cable to the host device.
3. Connect your guitar, bass or other mono instrument to the 1/4” input jack on iRig USB.
4. Launch your preferred audio App and set iRig USB as your default audio device. To do so, please refer to
the documentations of the App or Software you’re using.
5. Connect your headphones, mixer or powered speakers to the iRig USB headphone jack. You can control
this level with the host’s volume control.
6. Connect an external amplifier to the 1/4” TS Amplifier output jack on iRig USB and select the type of signal
sent to the output with the FX/THRU switch.

3. iRig USB status LED

The LED on iRig USB gives you important information about the iRig USB’s operative status.
• LED is off: iRig USB is not connected to any power source.
• LED is blue: iRig USB is connected and active.
• LED is red: iRig USB is active and the input signal is too high.

4. Setting the input gain

When playing your instrument check the iRig USB status LED. If the LED is sometimes flashing RED you should
decrease the iRig USB input gain by rotating the GAIN knob CCW (counter-clock wise).
You can check the optimal input level within the audio software you’re using.

5. Amplifier output jack

You can connect an external amplifier to iRig USB thanks to the “Amplifier output jack”. This allows you to
send the processed signal (i.e. from a rig inside your mobile device) or a direct unprocessed signal, out to your
amplifier or other unbalanced input.

­­­­­­­­­5
English

5.1 FX/THRU switch

FX THRU

The THRU-FX switch allows you to select the type of output that is sent thru the “Amplifier output jack.”
When this switch is set to THRU, the “Amplifier output jack” carries the same signal that is sent to the
instrument input. This mode is typically used to send the dry instrument signal back out to an instrument
amplifier or other unbalanced input. This lets you plug your favorite amplifier into the “Amplifier output jack” and,
at the same time, connect iRig USB to your mobile device that runs. For example, a tuner app or your favorite
recording app. The headphone out lets you listen to the processed output of your device.
When this switch is set to FX, the “Amplifier output jack” carries the processed signal from your mobile device
to an instrument amplifier. This lets you process your instrument inside your favorite app and then send it to, for
example, an amplifiers clean channel.

6. Headphone output jack

The 1/8” headphone output lets you conveniently monitor the signal coming from your device. This output works
seamlessly in both switch positions (Thru-Fx). It is also possible to adjust its volume with the connected host
volume control.

­­­­­­­­­6
English

7. Troubleshooting
Sound is distorted.
Check that the input gain on iRig USB has been set properly. If the LED is red when you play your instrument,
decrease the input gain as described in this guide.
No sound is playback thru the connected headphones nor to the Amp out when in FX mode.
Use the volume control on the connected host to set the volume of the headphone output and FX out.

8. Specifications
Common
AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz and 48 kHz
Host connection: USB Type-C socket

Instrument Input
Input impedance: 500 kOhms
Maximum input level: +13.5 dBu
Frequency response: From 20 Hz to 20 kHz within 0.5 dB (48 kHz sample rate)
Dynamic range: 90 dB(A)

Amp output
Configuration: Unbalanced
Output impedance: 3.3 kOhms
Frequency response: From 10 Hz to 20 kHz within 1 dB (48 kHz sample rate)
Dynamic range: 97 dB(A)

Headphone Output
Output impedance: 22 Ohms
Maximum output level: approx 6mW into 50 Ohms load
Frequency response: From 10 Hz to 20kHz within 1 dB (48 kHz sample rate)
Dynamic range: 94 dB(A)

­­­­­­­­­7
English

Warranty
Please visit:
www.ikmultimedia.com/warranty for the complete warranty policy.

Support and more info

www.ikmultimedia.com/support
https://www.ikmultimedia.com/products/irigusb

­­­­­­­­­8
Regulatory

www.ikmultimedia.com

All specifications are subject to change without further notice.

Document Version: 1.0

Latest revision: 2023/09/12

© 2001-2023 IK Multimedia. All rights reserved.

IK Multimedia Production Srl IK Multimedia US, LLC IK Multimedia Asia

Via dell’Industria, 46, 590 Sawgrass Corporate Pkwy. TB Tamachi Bldg. 1F, MBE #709
41122 Modena Sunrise, FL 33325 4-11-1 Shiba
Italy USA Minato-ku, Tokyo 108-0014
Japan

iRig® USB is a trademark or registered trademark property of IK Multimedia Production Srl. All other product names and images, trademarks and artists names are the property of their respective
owners, which are in no way associated or affiliated with IK Multimedia.

­­­­­­­­­9