Corrugated Board Inspection

Stay within your quality specification and increase

your productivity: CartonSTAR

CartonSTAR Applications
Flexo direct printing for corrugated board sheets

More production efficiency by reducing manual Flexo or offset preprint in web printing
Digital printing on corrugated board on roll and sheet
quality checks
Industry Requirements Highlights
High performance hardware at low maintenance
Increasing quality requirements for printed products driven
level, resulting in low cost of ownership
by global brands
Steady and stable inspection performance on all
Machine productivity has to be increased by producing at
substrates without operator intervention; saves time
uppermost speed, by reducing make-ready and increas-
and increases confidence of operators; CartonSTAR
ing effective production
is the “GPS” for the printer during the print job,
Increasing profitability by reduction of waste and complaints allowing him to do his job better and stress-free
Smaller runs require better monitoring systems with faster Earliest detection of process defects saves a lot
response times of money; less waste; no defective material sent
downstream for further finishing. Enables faster
CartonSTAR: Increase your machine throughput by printing and less human errors
focusing on real defects Inline, continuous and documented monitoring
is the right tool for internal improvement, root cause
100 % inline inspection of every square millimeter of the
identification.
printed job at the highest machine speed
Avoid disposal of an entire print production due to
Earliest detection of systematic printing defects
wrong or defective cylinders / plates.
100 % detection of sporadic defects
Produce same quality level with all printing lines
Classification of relevant errors for dedicated all the time.
error messages
Job management for different quality levels; adjustable
quality parameters
Printing
Verification of the correct print job and checking the
printing plates by comparing them with the customer’s PDF Right the Exc
First Tim ellence!
Providing valuable details and reports for improving
e. Every
performance and yield T ime.
Features
Advanced LED and color line scan camera technology
Real-time compensation algorithms (for material and
press performance)
Reliable defect classification according to customer
requirements
Dedicated algorithms to avoid false alarms
Inline & continuous monitoring: add-on functionalities to
monitor basic product/process parameters (color consist-
ency, print-to-print register, print to board register)
Add-on functionality to check printed content (PDF
comparison)
Add-on functionality to concentrate on points of interest
(Masking of die-cut areas)
LiveSheetView for fine tuning of the register during make
ready
Integrated data mining and reporting tools
Permanent feedback on fault classes, single or serial
errors and color variations
Touch & Inspect GUI
State of the art user interface
Easy to operate
Simple intuitive setup

ER
MA
ST
n S TAR n S TAR
Pa per C ar
to
C ar
to
Corrugating Boards Pre-Press
PDF
Print Flexoprint/Postprint Die-Cutting /
Creasing
Folding /
Marking
Bundling /
Rejecting

Data

USA Optimizing Workflow with Inspection STARs

ISRA VISION
Germany France USA Russia Korea
Tel.: +49 (6151) 948 0 Tel.: +33 (0) 1 39 09 32 00 Tel.: +1 (770) 449 77 76 Tel.: +7 (921) 055 63 30 Tel.: +82 (31) 806 973 00
Belgium Italy Brazil P.R. China Taiwan (R.O.C.)
Tel.: +49 (2366) 930 00 Tel.: +39 (0464) 490 603 Tel.: +55 (11) 347 611 32 Tel.: +86 (21) 685 002 88 Tel.: +886 (3) 250 01 48
Spain UK Turkey Japan India
Tel.: +34 (93) 839 70 32 Tel.: +44 (1442) 261 202 Tel.: +90 (212) 285 97 45 Tel.: +81 (45) 534 99 11 Tel.: +91 98 23 16 24 55

Optimize your ROI with the technology leader ISRA

[email protected] www.isravision.com